Emmulator does not appear in midlet application

Hi There,
I am currently developing a UDP SOAP server for mobile devices that will host the webservices. I am in its initial phases and pretty new to J2ME too. I have created Midlet Application that listens to UDP requests. When I run the application the DefaultColorPhone emmulator lounches and starts listening on a certain port.
Some time later I just renamed my class from SoapServer to UDPSoapServer. Till that time whenever I run the application, no emmulator appears, no matter which one is it and the process keep on terminating. I am using CLDC 1.1 and MIDP 2.0. I think there is some IDE Configuration Issue as there is no errors in my application. I have cleaned it and build and compiled it again.
Can any one plz help me in this. I really need this urgently.
Regards,
Fahad Aijaz

Try "Reset Download Actions": http://kb.mozillazine.org/File_types_and_download_actions

Similar Messages

The application called VirusScan that comes preloaded on the macbook will no longer open, claiming that it is corrupt and that I must reinstall it. After looking in the app store it does not appear that said application is available for re-downloading.

The application called VirusScan that comes preloaded on the macbook will no longer open, claiming that it is corrupt and that I must reinstall it. After looking in the app store it does not appear that said application is available for re-downloading. Is there a special, non-app store place where I am to go for this?
Also, I installed MacKeeper about two-three months ago and am questioning its performance. Looking for input as to whether or not this application helps or hinders my system.

I'll back up Csound on the MacKeeper thing. In fact, I actually wrote the following about it:
http://www.reedcorner.net/news.php/?p=245
Remove is ASAP. Do not use the provided uninstalled, as there are widespread reports of pop-ups advertising MacKeeper on your system after incompletely removing it. Try this:
http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
As for VirusScan, Barney is right on the money that it does not come preinstalled on any Mac shipped new from Apple. However you have gotten it, your best bet is removing it. See my Mac Malware Guide for more information that will help you understand and avoid Mac malware without relying on anti-virus software.
http://www.reedcorner.net/guides/macvirus
(Note that my pages contain links to other pages that promote my services, and this should not be taken as an endorsement of my services by Apple.)

Firefox won't install on my Mac, it just finishes the installation then does not appear in my Applications folder.

Firefox offered to create a new profile for me, but took forever to do so so eventually I had to shut off the computer. In restarting, initially Firefox would not open as "Profile could not be found". Having moved Firefox to my trash folder, when I attempt to install Firefox again, it completes the download, then does not appear in my Applications folder.

This is likely caused by a problem with the profiles.ini file and the profile marked as Default=1 in this file is not present on the hard drive.
*Mac: ~/Library/Application Support/Firefox/
You can use one of these to make Firefox create/use a new default profile:
*Delete the profiles.ini file to force Firefox to create a new default profile
*Use the Profile Manager to create a new profile
*Use "Choose Folder" when you create a new profile to select the location of a lost profile and recover this profile
*http://kb.mozillazine.org/Profile_Manager
*https://support.mozilla.org/kb/Managing+profiles
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Download and save the full Firefox installer to the desktop and start the installation with a double-click on the desktop icon.
You can find the full version of the current Firefox 29.0.1 release in all languages and for all Operating Systems here:
*http://www.mozilla.org/en-US/firefox/all.html
See also:
*http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X

The device does not appear in the application find my iphone

The device does not appear in the application find my iphone. Because of this I can not lock my ipod 5

Try
iCloud.com from a computer
Select the Find My iPhone green circle
Top center select All Devices
Note is it shows here you can remove it from here too.
If it's not there it's linked to a different Apple ID

System default email client (Thunderbird) does not appear in mailto applications.

I should like to use Thunderbird as the mailto application in Firefox. The only options listed for mailto are GMail, Yahoo mail, always ask, and choose application; use default does not appear.

I've solved this. Clicking "use other" in mailto applications, "cancel" when a window opens to select application, then clicking an application other than mailto, and the system default mail client is selected. Seems a bit user unfriendly. I'm running Firefox 24 under Ubuntu 13.04 BTW.

Edit Button does not appear in Planning Application?

Hi ,
I have created one application in Planning. Using “Outline Load” utility I have loaded metadata in this application.
But now I am not able to add any dimension or member in this application. even I am not able to add,edit or delete any member in the same application. I am not able to change any properties of member as well as dimension.
If I created any new application in the planning then all the buttons are appear in that application so, I can Add,Edit, delete any member or dimension in this application.
could you tell me what happened in my First application so because of that I am not able to view any buttons like add,Edit,Delete ?

Did you convert the application to EPMA?, if so then you can only edit members in EPMA not in Planning^^^A pox upon EPMA.
OP, did you really go through the step of converting a Classic app to EPMA? That would be pretty dramatic if true. And painful, as you have maybe found.
Regards,
Cameron Lackpour

Re-installed iPhoto Does not appear in Finder/Applications

I had iPhoto on my MBPro and attempted to transfer my iPhotos from my iMac to it. I was not satisfied with the transfer so I sent photos and iPhoto to Trash. I then re-installed iLife but after installation, I can not find iPhoto.app in Finder or on doc or on laptop.
Where should I look for iPhoto?
What should I have done/not have done/should do/ or not do/ Now?
I really need to get the iPhotos albums and photos from iMac to MBPro before Tuesday of next week (06/09/09)
Thanks for your help.
I use iPhoto '08!
Thanks.

iPhoto should be in the applications folder - if it is not delete all iPhoto receipts - "your hard drive" ==> library ==> receipts==> - and install again
Note in the future the application is separate from the library - and you can have two different libraries for the same version on a machine (actually any number of libraries) and switch between them by launching iPhoto while depressing the option (alt) key and using the select library option
LN

I have downloaded After Effects but it does not appear in my application folder.

I have downloaded three programmes from CC but now I have just downloaded After Effects but it is not in my applications folder.

Hello Jeff A Wright and thanks for your reply.
My problem was that I had an incompatible operating system on my iMac. I have downloaded a new one and everything is working just great.
Thank you again and take care.
Fred

Lightroom does not appear under the application tab on my mac toolbar, where is it?

I recently bought the adobe creative cloud and was thrilled to see that I can have access to Lightroom. The issue is that it is not under the tab on my toolbar. The bigger issue is that when I go to the adobe download center and click 'download', all that does is open up the tab to where lightroom should be. Has anyone else had this problem and found the solution. Let me know, cheers.

I sorted it out. I was using a trail version and had signed up with a different email. I logged out of my existing trail account, then logged in using the email I signed up with during the purchase. All is well. Thank you for the quick response and feedback.

"mailto" does not appear in options/application

According to firefox help, you can set Firefox to default to Google Mail by going to Tools/options/applications and selecting Mailto. Mailto is not one of the listed options, however.

Try "Reset Download Actions": http://kb.mozillazine.org/File_types_and_download_actions

Install application step on task sequence - application does not appear in the application list

Hi,
I am trying to create a build and capture task sequence and add some application installation steps in the process.
On Install the following applications step when I click the star to choose which applications I want to install, Office 2010 application is not listed there, even though it is available in software library
and and I've been installing it successfully from application catalog.
I tried changing the setting "Allow this application to be installed from the Install Application task sequence action instead of deploying it manually", but it had no effect.

See http://technet.microsoft.com/en-us/library/hh846237.aspx:
The applications that are installed must meet the following criteria:
It must run under the local system account and not the user account.
It must not interact with the desktop. The program must run silently or in an unattended mode.
It must not initiate a restart on its own
Torsten Meringer | http://www.mssccmfaq.de

In the download box, the check box for "always do this for this type of file" is grayed out for the type of file I want, and that application does not appear in the application menu, so how do I set it to perform this function every time?

The file type in question is InCopy, and the download box acknowledges that program as the type to open it with, but I never want to open it; I always want to save it. This feature works fine with other file types, but not with InCopy. I download thousands of files, so automating this is very important.

The file type in question is InCopy, and the download box acknowledges that program as the type to open it with, but I never want to open it; I always want to save it. This feature works fine with other file types, but not with InCopy. I download thousands of files, so automating this is very important.

Send link doesn't work and Mailto does not appear on the applications tab

After reinstalling Firefox twice (Tried two different versions) after my system crashed and then recovered, I got everything working again except the Send Link feature in Firefox. Reading through the forum, I tried to specify my mail program (Outlook) under Tools>Options>Applications; but found no Mailto option shown that I could select. I wonder if some service that this depends on got shut off when my system was recovered.

Clear Cookies & Cache
* https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
Clear the Network Cache
* https://support.mozilla.com/en-US/kb/How%20to%20clear%20the%20cache#w_clear-the-cache
Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Check and tell if its working.

Adobe flash player not working and does not appear as an application under tools, options

I have the latest versions of adobe flash and firefox

Followed up here: https://support.mozilla.org/en-US/questions/930029

Reader XI (11.0.09) sometimes starts process but does not appear in applications or open on desktop

On windows 7 64-bit. Reader XI (11.0.09) sometimes starts the process but does not appear in the applications. This happens however the application is started i.e. start menu, double click pdf, double click AcroRd32.exe. It

11.0.09 is hanging for us - backing out to 11.0.08 fixes the issue

Emmulator does not appear in midlet application

Similar Messages

Maybe you are looking for