EMOD error when trying to upload images to hosting library with WIN 7

Dear Gurus,
using WIN 7 and IE8 i am facing the problem that i receive the error message: "An internal error occured. Please contact your site administrator for assistance."
I have tried multiple settings also setting trusted site: *.crmondemand.com
It works but not having WIN 7 machine.
Oracle statement is that they do not support WIN7 with Email Marketing On Demand. So no help from thereside. Do you have any suggestions for me how i could upload images to EMOD having WIN7 machine. I have already tried with IE, Firefox and Chrome. Every time the same error message.
Thanks for any hint!
Regards Juergen

IE8 isn't certified for EMOD yet....you need to use IE7 to upload the images. I haven't seen anything from Oracle about changes in the new releases.
BOB - Do you know when the next release of EMOD is? I think thats 1.5?
cheers
Alex

Similar Messages

Error 500 - Internal server error when trying to upload images to website

I have been unsuccessful in my many attempts to upload images to the bustalk website. I keep getting an Error 500 - Internal server error message asking me to try again later but the fault is still repeated.

I have only found two that work correctly. They were created the same way and permissions are the same. I don't know why one works over the other.
/Indiana University/Project Sites/Oncourse Team - FAIL
/Indiana University/Project Sites/SyllabusTest - Success
/Indiana University/Project Sites/CHEN-TES 101 01 - FAIL
/Indiana University/Project Sites/UITS Podcast Team - FAIL
/Indiana University/Project Sites/ePortfolio Playgroun - FAIL
/Indiana University/Project Sites/Testong - FAIL
/Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14431 - FAIL
/Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14431 - FAIL
/Indiana University/SP08 Spring Semester/SP08 OC DEV C201 DEV2 - FAIL
/Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14438 - FAIL
/Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14552 - success
/Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14392 - FAIL

Device uses too much power error when trying to upload pictures

I am now getting the device uses too much power error when trying to upload pictures from my Nikon Coolpix. It had worked fine using the Apple camera kit, but just started giving this error. What changed?

1. Turn off iPad
2. Connect camera to iPad
3. Turn on power of camera
4. Turn on iPad

For uploading PDF (in php) if (!=application/pdf) {"No PDF"} gives error when trying to upload PDF. Why?

In a php upload file I have inserted:
if($_FILES['file']['type'] !="application/pdf"){ echo "Should be PDF";}
exit;
Even when trying to upload a PDF file the error message comes: Should be PDF.
Earlier this worked fine. Maybe a bug in an update?
Regards,
pluys

I think I found part of a solution now. It is not Firefox, it is some add-on or plug-in. I myself use a lot of add-ons. I asked someone who was new to Firefox to load up a PDF file. There was no problem!
So now I'm going to check all my add-ons, hoping it is not Firebug.
All the best,
Pluys

Error when trying to upload .mxp file

This is the error I'm getting when trying to upload an .mxp
for a Fireworks extension, using Firefox:
(I can't even get to the login screen for the Exchange using
Explorer, go figure)
Anyone know what the "not enough space" error means?

not sure why this posted twice.

Conflict error when trying to upload to the cloud from my Note tablet

Three days ago I started getting an error when trying to sync new files to the cloud. They will try over and over until I turn sync access off, in fact. I also have Photoshop CC6 and was just added to the early access for the desktop access and that is when this problem started. I really need to be able to save my psdx files in some way and at the moment the cloud is the only way from the touch app. Any way to fix this? I am on a Samsung Galaxy Note 10.1 and Android Jellybean 4.1.2.

Make sure you're signed into Creative Cloud properly via the Settings icon in the upper right of the project selection workspace > My Account. (Looks like a cogwheel.) From some reason, that option goes kablooey from time to time.

Error when trying to see pages in webcenter app with adf security activated

Greetings
I have this problem
I developed a WebCenter Application that uses ADF Security with form authentication. This App has
two JSPX the first one is the login page and the second one is the page where i manage runtime created pages
using the CREATE PAGE task flow and a page tree iterator to see my created pages.
when i deploy de application on the weblogic server i am able to login successfully and create as many pages as
i want and also see them using the link generated. the problem is that when a delete the application from the weblogic
server, i mean the deployed application, then redeploy the same application on the server i can login again and
see the pages i created before but when i try to reach them i get this error showed in my internet browser:
Error 401--Unauthorized
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.2 401 Unauthorized
The request requires user authentication. The response MUST include a WWW-Authenticate header field (section 14.46)
containing a challenge applicable to the requested resource. The client MAY repeat the request with a suitable Authorization
header field (section 14.8). If the request already included Authorization credentials, then the 401 response indicates that
authorization has been refused for those credentials. If the 401 response contains the same challenge as the prior response,
and the user agent has already attempted authentication at least once, then the user SHOULD be presented the entity that was
given in the response, since that entity MAY include relevant diagnostic information. HTTP access authentication is explained
in section 11.
Does anybody now what kind of configuration i am missing or what is happening?
thanks for your help

this issue has a solution showed on the this thread Re: ERROR when trying to see pages created with create page task flow

Error when trying to upload an image

Hi!
I'm trying to upload an image to my container name "vhds" inside storage account "pruebasatfacr" but I'm getting the following error:
[root@vmlbcatfl49 KVM]# azure storage blob upload -a pruebasatfacr -k "$base64string" --container vhds
info:
Executing command storage blob upload
File name: azure-POSTGRES-9.3.2-RHEL-65.X64.ATF.PRB-disk1.vdh
+ Checking blob azure-POSTGRES-9.3.2-RHEL-65.X64.ATF.PRB-disk1.vdh in container vhds
error:
getaddrinfo ENOTFOUND
info:
Error information has been recorded to azure.err
error:
storage blob upload command failed
[root@vmlbcatfl49 KVM]# cat azure.err
Fri Jan 02 2015 09:07:47 GMT+0100 (CET):
{ [Error: getaddrinfo ENOTFOUND]
stack: [Getter/Setter],
code: 'ENOTFOUND',
errno: 'ENOTFOUND',
syscall: 'getaddrinfo',
__frame:
{ name: '__1',
line: 270,
file: '/usr/lib/node_modules/azure-cli/lib/util/storage.util._js',
prev:
{ name: 'StorageUtil_performStorageOperation__1',
line: 251,
file: '/usr/lib/node_modules/azure-cli/lib/util/storage.util._js',
prev: [Object],
active: false,
      offset: 19,
col: 4 },
active: false,
offset: 2,
col: 15 },
rawStack: [Getter] }
Error: getaddrinfo ENOTFOUND
at errnoException (dns.js:37:11)
at Object.onanswer [as oncomplete] (dns.js:124:16)
at __1 (/usr/lib/node_modules/azure-cli/lib/util/storage.util._js:272:15)
at StorageUtil_performStorageOperation__1 (/usr/lib/node_modules/azure-cli/l
at uploadAzureBlob (/usr/lib/node_modules/azure-cli/lib/commands/asm/storage
I guess that can be a DNS
issue but I need more information about that, does anyone
know why can it be caused?
Thanks in advance!

Hi again and thanks for your response!
I have a VM with Azure CLI tool running with RHEL 6.5, so that I think i can't use AzCopy only compatible for Windows O.S.
The file that I want to upload is located on Azure CLI server and I execute de following command:
[root@vmlbcatfl49 KVM]# azure storage blob upload -a pruebasatfacr -k "$base64string" --container vhds
info:
Executing command storage blob upload
File name: azure-POSTGRES-9.3.2-RHEL-65.X64.ATF.PRB-disk1.vdh
+ Checking blob azure-POSTGRES-9.3.2-RHEL-65.X64.ATF.PRB-disk1.vdh in container vhds
error:
getaddrinfo ENOTFOUND
info:
Error information has been recorded to azure.err
error:
storage blob upload command failed
Further info related to this error:
[root@vmlbcatfl49 KVM]# cat azure.err
Fri Jan 02 2015 09:07:47 GMT+0100 (CET):
{ [Error: getaddrinfo ENOTFOUND]
stack: [Getter/Setter],
code: 'ENOTFOUND',
errno: 'ENOTFOUND',
syscall: 'getaddrinfo',
__frame:
{ name: '__1',
line: 270,
file: '/usr/lib/node_modules/azure-cli/lib/util/storage.util._js',
prev:
{ name: 'StorageUtil_performStorageOperation__1',
line: 251,
file: '/usr/lib/node_modules/azure-cli/lib/util/storage.util._js',
prev: [Object],
active: false,
      offset: 19,
col: 4 },
active: false,
offset: 2,
col: 15 },
rawStack: [Getter] }
Error: getaddrinfo ENOTFOUND
at errnoException (dns.js:37:11)
at Object.onanswer [as oncomplete] (dns.js:124:16)
at __1 (/usr/lib/node_modules/azure-cli/lib/util/storage.util._js:272:15)
at StorageUtil_performStorageOperation__1 (/usr/lib/node_modules/azure-cli/l
at uploadAzureBlob (/usr/lib/node_modules/azure-cli/lib/commands/asm/storage
Is it possible to continue exploring this option with the CLI tool to upload the file (.vhd)?

BSP error when trying to upload employee photo

,<h1>.Dear Experts,<</h1>
<h2>I am trying to upload employee photo on my SAP system DB.
     I am following note 595563 and performing below mentioned activities.</h2>
       <h3> * Make sure that the HTTP plugin is active.</h3>
    <h4> Transaction SMICM, "Display Services" function key (shift F1). The list of services must contain a port other than 0 for HTTP. If not, you must adjust the relevant profile parameter.
     Typical entry:
      icm/server_port_0         PROT=HTTP, PORT=1080, TIMEOUT=900
Make sure that the /sap/bc/contentserver service is active.
      Transaction SICF, select: default_host - sap - bc - contentserver. Select the function to display/change the service. Check that a user is defined.
      If a user is not defined, use Transaction SU01 to create a new user. Use the "System" user type. Assign the profiles SAP_ALL and SAP_NEW to the user.
      Using the relevant data from the user that has just been created, maintain the anonymous logon data for the service /default_host/sap/bc/ and then save the changes.
Check the system PSE.
      Start Transaction STRUST. Expand the system PSE. The system PSE must be green for each application server.
Determine a suitable exchange directory.
      The archive system must be accessible from every application server. If all application servers are running on the same platform (for example, Windows), one network directory that is accessible on all application servers (for example,
server\share) is sufficient. You can generally use the global directory (profile parameter DIR_GLOBAL). You can use report RSPARAM to determine the profile parameters.
Setting up the storage
Create a table for storing the data.
      Use Transaction SE11 to create a copy of table SDOKCONT1. If you want to create the repository database, you can call the table ZCONT_DB, for example. Save the table as a local object. Activate the table.
Create the repository.
      Use Transaction OAC0 to create a new repository.
      Use the following parameters:
        Repository                              Max. two characters, for example, DB
        Document area ArchiveLink
        Storage type    R/3 database
        Storage subtype normal
        Version no.      0046
        Contents table <table name>     for example: ZCONT_DB
        Exchange directory   <directory name>          for example:
server\share\
      Note that the exchange directory ends with a \ (or a / on Unix). If you are using a variety of platforms, you must use Transaction FILE to define a suitable logical file name, and use this file name.
      Save the settings.
</h4>
<h5>
Everything goes well but when i try to test the Repository created by RSCMSTH0 in SE38 it throws the error </h5>
HTTP error: 404 Business Server Page (BSP) Error
Message no. CMS025
Diagnosis
Error in accessing via HTTP
404 Business Server Page (BSP) Error
Please help. M i missing anything ..?
<h6>Regards,
Alok</h6>
Edited by: Nikhil Manjrekar on Aug 14, 2009 9:45 AM
Edited by: Nikhil Manjrekar on Aug 14, 2009 9:45 AM

Hi,
I am getting same problem what is the solution??
Thanks
Santhosh

Error when trying to upload an app to the App Store (exception while validating)

Hello everybody,
I'm trying to upload an update of a DPS single edition app but when using the Application Loader I have this error:
"Exception while validating: *** -[NSPlaceholderString initWithFormat:locale:arguments:]: nil argument"
Any suggestion? the test app works right in my iPads and I tried to download the zip file (from DPS App Builder) several times with the same result.
Thanks

@Riccardo – I suggest you go to the DPS forum for this:
http://forums.adobe.com/community/dps?view=discussions
Uwe

Error message trying to upload images to Blogger

Yesterday I started getting this error message :
Safari can’t open the page “http://photos.blogger.com/upload-image.do”. The error was: “POSIX error: Invalid argument” (NSPOSIXErrorDomain:22) Please choose Report Bug to Apple from the Safari menu, note the error number, and describe what you did before you saw this message.
I just did the Disk permission repair ... still no help. Upgraded to 10.4.8 4 days ago and began to have errors with email too. But that seems to have been resolved.

When I attempt to attach a file to a Yahoo e-mail, I get this error message:
This seems to be the same error you are seeing. If I enable my Safari cache the error goes away, i.e. I can upload the attachement to the Yahoo server.
Try this: Move the Safari cache folder to the trash. Also, using OnyX, clean the System and User Cache folders on your computer. The restart of your computer following OnyX's completion takes a bit longer as the system needs to reset the cache folders. Also, have a look at this helpful description for clearing cache folders with OnyX.
Now try the upload on Safari. Post back.

Apple API Error when trying to upload app in application loader, help?

I'm trying to upload my app to application loader and it keeps showing up this error. Your app contains non-API usage. I used zip files for the choose file thing. So how do I get rid of this error and send my app to apple?

You're going to have a very hard time with what you're trying to do it if you don't know the basics or have enough curiosity to look things up on your own - Google is your friend for API and the hundreds of other abbreviations, acronyms and technical phrases you will eventually encounter.
As for file type to upload, see:
iTunes Connect Developer Guide
Adding New Apps
Managing Your App
Good luck.

Code wont work when trying to upload image!

My Code wont work when I try to upload an image to mysql. (Field in mysql is BLOB)
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>insert</title>
<script src="SpryAssets/SpryValidationTextField.js" type="text/javascript"></script>
<link href="SpryAssets/SpryValidationTextField.css" rel="stylesheet" type="text/css" />
<?php require_once('Connections/drama_database.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
    $theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
$editFormAction = $_SERVER['PHP_SELF'];
if (isset($_SERVER['QUERY_STRING'])) {
$editFormAction .= "?" . htmlentities($_SERVER['QUERY_STRING']);
if ((isset($_POST["MM_insert"])) && ($_POST["MM_insert"] == "form1")) {
$insertSQL = sprintf("INSERT INTO databaseimage (name, image) VALUES (%s, %s)",
                       GetSQLValueString($_POST['name'], "text"),
                       GetSQLValueString($_POST['image'], "double"));
mysql_select_db($database_drama_database, $drama_database);
$Result1 = mysql_query($insertSQL, $drama_database) or die(mysql_error());
mysql_select_db($database_drama_database, $drama_database);
$query_image = "SELECT * FROM databaseimage";
$image = mysql_query($query_image, $drama_database) or die(mysql_error());
$row_image = mysql_fetch_assoc($image);
$totalRows_image = mysql_num_rows($image);
?>
</head>
<body>
<form action="<?php echo $editFormAction; ?>" method="POST" enctype="multipart/form-data" name="form1" id="form1">
Name: <span id="sprytextfield1">
<label for="name"></label>
<input type="text" name="name" id="name" />
<span class="textfieldRequiredMsg">A value is required.</span></span>
<p>
    <label for="image"></label>
    <input type="file" name="image" id="image" />
</p>
<p>
    <input type="submit" name="Upload" id="Upload" value="Upload" />
</p>
<input type="hidden" name="MM_insert" value="form1" />
</form>
<script type="text/javascript">
var sprytextfield1 = new Spry.Widget.ValidationTextField("sprytextfield1");
</script>
</body>
</html>
<?php
mysql_free_result($image);
?>
Any help would be very much appreciated!

OK, that tutorial is different than what I assume you want. I suspect you want the ability to have users upload images and store the metadata of those images in a database, correct? That tutorial only shows how to upload to a specific location so the image can
be displayed in an iframe.
Search for "php file upload scripts" to see how to upload to a file system and store the metadata in the database.
>and no, mostly i have used the dreamweaver features to avoid it as much as possible
As you are seeing, DW code is very limited in what it can do. It also generates code that is not up to current standards,and is very difficult to work with if you need to modify it. Basically, it's junk. Forget it and learn how to read and write code. There are tons on tutorials on how to get started with PHP. DW Server behaviors only seem like a time saver in the beginning. In the end, you'll end up wasting more time using them than learning how to code yourself.

Internal Server Error when trying to upload and manage files

The instructor was experiencing this difficulty on Tuesday 1/13, after the notice was closed. I just
went into their site again(1/14/09 2:48pm), launched iTunes U and received the same error after clicking on 'Upload And Manage Files' in their iTunes U page.
I was able to reproduce the same error on our iTunes U site.
https://deimos.apple.com/WebObjects/Core.woa/EditFiles/indiana.edu

I have only found two that work correctly. They were created the same way and permissions are the same. I don't know why one works over the other.
/Indiana University/Project Sites/Oncourse Team - FAIL
/Indiana University/Project Sites/SyllabusTest - Success
/Indiana University/Project Sites/CHEN-TES 101 01 - FAIL
/Indiana University/Project Sites/UITS Podcast Team - FAIL
/Indiana University/Project Sites/ePortfolio Playgroun - FAIL
/Indiana University/Project Sites/Testong - FAIL
/Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14431 - FAIL
/Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14431 - FAIL
/Indiana University/SP08 Spring Semester/SP08 OC DEV C201 DEV2 - FAIL
/Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14438 - FAIL
/Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14552 - success
/Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14392 - FAIL

Getting error when trying to download update for flash player with OSX 10.91

Trying everything to download update for Adobe Flash Player. This is maddening. I have tried uninstalling previous player and re-installing and checked my preferences. Can any one give me some instructions that are easy to understand. I keep getting an error when installing.

There usually is an Adobe flash uninstaller that goes through a process satisfactorily.
Did you get the Adobe Flash update from their
page, directly? http://get.adobe.com/flashplayer/
Also note the extensive info at Adobe link below.
If you are having trouble, or Safari is involved, if
you use a different browser, such as Firefox, etc to
get that version Flash update. There's another thing to
look into, in Mavericks, that older OS X didn't
have, that may affect installation...
In System Preferences, find a Flash Player preference
under "Other." Click on the Advanced tab and then "Check
Now" in the Updates section. An available new one
would be installed. There is a similar issue/answer
in the following solved ASC discussion thread:
https://discussions.apple.com/message/21189654#21189654
•Adobe Flash Player - Installation Problems - Mac OS X:
http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.ht ml
Hopefully this helps.
Good luck & happy computing!

EMOD error when trying to upload images to hosting library with WIN 7

Similar Messages

Maybe you are looking for