Employee Candidate Notification to Manager

Hi,
We have a requirement that when an employee applies for a internal vacancy the same should go to Manager and few others for Approval. I am unable to find any such rule in the AME/Workflow which we can use and build the approval list. Any help will be appreciated
Regards
Shashwat

Well, this is a business process....afer a employee applies for vacancy it should go to manager for approval, which sounds fine to me except that oracle doesnt seem to support is right now.

Similar Messages

How to change the from name in worflow flow notification to manager

Hi ,
I want to change a from_role name in notification message to approval in Internet Expenses workflow.
Requirements is like this: In Internet expense a supervisor create a expense report behalf of his subordinates. when he submit for the manager approval. in the notification of Manager approval it shows the subordinate name in the 'from' this is the standard.. but i need to display the name of creator that is supervisor name in the from.
please provide a solution for this,,.. your early response will be highly appreciated..
Thanks and Regards
Mohsin

I am not sure about how to change SERVICE_NAME in PL/SQL Developer (if at all it can be done in that ), but you will have to change the SERVICE_NAME in the TNSNAMES.ORA file.
1. Locate the entry for PLSExtProc in the file tnsnames.ora at:
$ORACLE_HOME/network/admin/tnsnames.ora
2. Change the SERVICE_NAME = ORCL
3. Save and reconnect
Aalap Sharma :)

Need to find employees reporting to a manager

Hi All,
I am new to HR module.
Basically, i need to develop a report which would list out all the employees reporting to a given manager ID. I am trying to understanding how this org unit, positions and users are tied to each other and what set of tables or function modules are involved in knowing all the employees reporting to a manager.
If my question is unclear, please let me know.
Thanks,
SKJ

SKJ,
Hope this helps.
1. I had to pass 002 (Reports (line) to ) Instead of 008 to RELAT to get all those positions reporting to manager position fould in step1. Is this correct?
Ans : 002 Relation is the Reporting Relation and 008 is Holder Relationship.
002 will help you to identify the relation ie, which position reports to which position. but if you want to know who is holding the position, you will need 008 relation.
In your case both relation may be required.
2. Does your steps work in any system? I mean, no matter how the data is set up in HRP1001?
Ans : This is the standard System behavior. Unless there is specific changes.
3. Can you also let me know how to start deriving this at company code level? I also have company code termed as Line of Business on my selection. User may enter only company code and i will have to extract everything.
Ans : If you have setup account assignmnet setting for the OU, then you should be able to do that.

How administrator can enroll employees in oracle learning management course

Hi ,
Can anybody tell me that how can an OLM administrator enroll employees in oracle learning management.We have a problem .The people in mexico cant read english so they cant use the Learner self service to enroll themselves into courses.So an administrator keeps a track of enrollments on a excelsheet but is it possible that an administrator can go into the oracle learning management and can enroll employees/people in oracle learning management and that course information would show up in the employees's profile.
Anyhelp would be higly appreciated
Thanks

Use the learning administrator responsibility.
Navigate to Learner enrollments and subscriptions
Press the Add Enrollments button
Search for your catalogue object (Course, Offerring, Class etc.)
Select Class and press either the bulk enrol or single enrol icons
Then enter the appropriate details to select the learner(s).
Hope this helps.
Regards
Tim

How to Send Notification to Manager of the Employee using Dynamic Action..

Hi All,
I am sending a notification using the Dynamic Action for an Infotype.. I am able to send mail using distribution list but I have a requirement to send the notification to employee manager. I am able to determine the Line Manager ID calling the subroutine in the dynamic action. But I am not sure how to send the notification to the manager.
If the email's are maintained in distribution list if I specify the text id in the feature M0001 and distribution list the notifications are sent. I am not sure how to pass the line manager id to get the same notification..
I have seen the option REC1 but infotype 0001 in not having the line manager id..

Used the Function Module RH_GET_LEADING_POSITION.
Thanks..

Leave Notification for manager through Outlook

Hi All,
Is there any way, a manager can get a notification on his Outlook Express whenever a mail item comes in UWL?
For example: If he gets a mail, from an employee, requesting for a leave, can he see this notification on his outlook as well?
Thanks and Regards,
Aditi

Dear Sanjay,
Thanks for clarifying the accurate use and meaning of SMTP and IMAP.
Our client does not required IMAP, they just want a notification mail should be come to his email so that they can see the details of Absence (which is applied through SSHR), SMTP server is already set up and we have written an custom program to send the notification in the form of e-mail with attachments to Vendors or suppliers and it is working correct. But when an employee is applying Leave through SSHR then notification is working but email is not going to the particular person.
Do we need to do any other setup (any Document), to make it correct. We are using 11i.
Thanks & Regards,
Shobhit

Email notification to Manager on routine change request

I am trying to set up a multi review activity template for routine change request. The first Review Activity should notify the creator of the Change Requests Manager so the Manager can review. In the Review Activity, there is a check box for "Line Manager
Should Review". If I just check this box, will the Manager listed in AD for that user get an email or do I need to create an email subscription?
If I need the to create an email subscription, the question would now be what do I select for "Related Recipients" keeping in mind this is a Review Activity? Since we don't know who the Manager will be as it depends on the user creating the CR,
I certainly can't hard code a recipient so I need to user Related Recipients. When I get to this part, I have a laundry list of selections that basically do not make sense to me. Any help here would be appreciated.

There's really three separate problems here, so i'll address them indivigually:
First, you want to automatically add a line manager to a change request. This is the intention of the Line Manager checkbox. when the activity status workflow runs, and that box is checked, it looks at the parent work item, then looks at the created by users
of that parent work item, and adds that user to the list of reviewers for the activity. The implied permissions (http://blogs.technet.com/b/servicemanager/archive/2014/03/19/improving-ad-connector-performance.aspx,
this seems to be the only documentation of it) will allow that user to approve.
Second, there are no notifications by default, but a common requirement is a notification for all reviewers when their input is required. i have used
This method to generate these notifications. fortunately, the method Travis details is compatible with the line manager checkbox.
Finally, Approvals by emails is a function of
the Exchange Connector. You can set up keywords to allow people to reply to notifications with directives like [Approved] or [Resolved], and the connector will apply those directives to related connectors. You have to modify the exchange connector to include
the id in brackets (i.e. "[RA1234]") so it gets related correctly, but using the notification method from above, this should be easy (and
here is a hint).

Notification to Manager on creation of an Urgent Change Control

Trying to set up a notification subscription so that when someone creates an Urgent Change Control, the Manager of that person gets notified. Looking in the subscription, under Recipients not sure what to put there. Since it could be anyone that creates
the CC, how do you direct the notification to just that persons Manager?
I am sure it has something to do with the Template that is used and the Activity tab but not sure what. Can someone get me started in the right direction or is this even possible?

Alternatively, If you need the line manager to approve, you might try adding a review activity to the process and setting the "Line Manager must approve" checkbox on that activity. if you have set up standard review activity notifications,
then the manager of whoever created the request will get a notice.
if the user only needs to be notified, then you might set the approval method on that activity to "automatic" so the notification is sent, then the RA is automatically approved and the process can continue.

How to list the employees working under one manager in the same row.

Hi,
my emp table has the following data.
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7369 SMITH CLERK 7902 17-DEC-80 800 20
7499 ALLEN SALESMAN 7698 20-FEB-81 1600 300 30
7521 WARD SALESMAN 7698 22-FEB-81 1250 500 30
7566 JONES MANAGER 7839 02-APR-81 2975 20
7654 MARTIN SALESMAN 7698 28-SEP-81 1250 1400 30
7698 BLAKE MANAGER 7839 01-MAY-81 2850 30
7782 CLARK MANAGER 7839 09-JUN-81 2450 10
7788 SCOTT ANALYST 7566 19-APR-87 3000 20
7839 KING PRESIDENT 17-NOV-81 5000 10
7844 TURNER SALESMAN 7698 08-SEP-81 1500 0 30
7876 ADAMS CLERK 7788 23-MAY-87 1100 20
7900 JAMES CLERK 7698 03-DEC-81 950 30
7902 FORD ANALYST 7566 03-DEC-81 3000 20
7934 MILLER CLERK 7782 23-JAN-82 1300 10
I want to group all the employees under one manager and list their names in the same row. IS that possible. When i tried the query below,
select mgr, count(*) employees from emp where mgr is not null group by mgr, ename;
I got the result as
MGR EMPLOYEES
7566 2
7698 6
7782 1
7788 1
7839 3
7902 1
Additionally, would I be able to display the names of the employees under one manager in a row? or atleast in some other way? Pls share your ideas.

A summary of different string aggregation techniques can be found here
http://www.oracle-base.com/articles/10g/StringAggregationTechniques.php

Approval workflow - can I consolidate many employees to a single manager?

Hello,
I need to design a workflow to check that users are still authorised to access a system, on a periodic basis.
I will supply a list of users and their managers, as a list onto the SharePoint.
The workflow will email each manager asking if they approve or reject their employee's access to the system. In each email, there is a link back to the SharePoint to allow them make their decision.
The issue I have is that some manager's are responsible for 30 or 40 employees. I do not want that manager to get 30 or 40 separate emails.
I'd like that manager to get a single email, with a link back to the SharePoint, where they could see their 30/40 employees with two checkboxs against each entry - approve/reject, or some other method to consolidate the manager's action.
I've been advised by my developer that it's not possible, but perhaps people here know of workarounds?
Thanks,
John.

Hi JS100JS,
In theory you should be able to accomplish this by:
Part 1
1. Adding a new column to the task list called employee.
2. Then in your workflow create a task for each employee and set the employee column for each task.
3. Once all the employees have tasks. send an email to each Manager with a link to the task list
Part 2
Setup a view on the task list. To do this:
a. Go to the task list
b. Click on the "list" tab at the top of the page
c. Click on Modify View
d. display only the columns you want the manager to see in their approval list
e. Under the Filter section, filter by "Assigned To" and set it equal to [Me]
This way the managers will only see tasks assigned to themselves.
Make sure the view is setup as the default public view.
Please let me know how it goes and if you need any additional help.
Good Luck!
Alex

SAP-HR : How to view list of all employees reporting to a manager

Hi friends,
I need to get the list of all the employee reporting to a particular manager. How do i do that?
Please help!!

go to the org assignment of the manager pernr and look at lla EE's reporting to him
else go to PPOSE and have a look at the same.
reward points if issue resolved

Employee Profile in Solution Manager - ITSM

Dear, We are going to implement the Solution Manager- ITSM (Service Desk), in our company, they have a Contact Center where the employee can call through a specific number and request an assistance from the IT Helpdesk.
Through the IVR the employee will be asked to enter his Employee ID number then transferred the call to the IT Helpdesk agent, now what they request is when the employee transferred to the agent, a Pop-up window will be opened in the IT helpdesk agent desktop which show the employee information (his last incidents...etc.) so the employee can get an updates of his Opened incident, or the ask the agent to open a new incident for him.
so is it possible for this, Do we have a profile page for each employee contains his last incidents...etc. like a user profile.
P.S: the company who’s is responsible for passing the employee ID number to the agent desktop, request a URL with dynamic variable
where they can replace this variable with the employee ID number.so the SAP Service Desk page will be opened.
Regards,

Hello Yazeed,
Something like that ?
Regards,
Luis

Unable to get the employee name in performance Management

Hi All,
I am facing problem with Performance Management in My Employment. Unable to see the employee name in PM docs to approve by manager.But same user is able to see in Backend under manager who has to be approve..Please assist to go further. Is there anything need to be done from portal side.?
Thanks & Regards,
Kumar. V.

Hello Sainth,
In Webi Prompts..you can see the "Key icon" click on that icon..it will show both text and key..it will helps you to run the report based on the Key..
Regards,
Naveen D

E-Recruitment- Recruiter selected candidates resume to manager

hi Experts,
1. We have a requirement that hiring manager should be able see resume of those candidate which are evaluated by recruiter only and not other.
Kindly suggest upon the solution. Is there any thing came up in EHP5 to address this? I read SAP has provided a selection activity in EHP5, can this be used for this purpose?
2. can anyone explain the use of Selection activity?
Thanks,
Ninad.

Hello,
You can created Quetionnaire activity which can be created by Recruiter to Hiring Manager to review the resume and provide feedback.
Also there is field called Read/Unread which can be used to ot track if the recruiter completed reading the candidate data and create custom code to filter this for hiring manager.
Thanks,
Raghu.

Mail notifications Identity Manager 11g.

Friends,
I have configured the resource database.
- As I can notify the user by email when you request a resource, and when the reconciliation process the information correctly and incorrectly.
- As I can send email notifications when a user is provisioned to a resource set Oracle Identity Manager 11g.
Thanks.

I am facing the same issue. However my platform is Windows 7 Ultimate x64. I guess all Vista compitable editions should be working on Windows 7 as well.

Employee Candidate Notification to Manager

Similar Messages

Maybe you are looking for