Employee Data in Dev Client

We did a client copy from Prod to Dev. Now the HR data is in Dev client. Dev client use to be the playground for our IT staffs to do development and testing with SAP_ALL access.
Do you think it is a risk and we should remove the SAP_ALL from IT staffs?
Please share how your manage this in your organisation. TQ.

Hi
If you think k in the near future some of your processes will be moved to production and you r not 100% live on the producton system at present than no need to deleate the data only deleate the data related to the salaries like IT- 0008, 0014, 0015, 0045 etc payroll infotypes data because all this is a sensitive and confidential information.
This is so because in near future you need to provide some test cases or test data to user. Or user have to create the new one.
Thanks
Sheetal

Similar Messages

How can I transport data from one client to another client?

How can I transport data from one client to another client?
Regards,
Subho

hmmm, CTS = cutomizing transport?
If you have a customizing table, there are still two possibilities.
1. customize in DEV system and transport
2. customize right there where you need it.
this depends on how the maintainance view is built. If it is a simple customizing table and you get not asked for a TR when customizing a new record or changing an existing one, you hit possibility 2.

Employee Data Transfer From Recruitment to PA

Hi All,
I have a query pertaining to employee data transfer from recruitment (PBA7) to PA.
Here the client uses recruitment module only for data maintenance and then transfer the data to PA module. Is it possible if we skip the data transfer from Rec. module to PA module.
Please advise URGENTLY.
Regards,
Garima

Garima,
If your query is resolved, request to close the thread or else feel free to touch base
Thanks and Regards
Anil

BI Dev client inactive & DSO activation problem

Hi SAP Experts,
Am facing some problems in DSO activation. Firstly the Business content DSO was not activating .So I had to activate the Datasources on the R/3. There were no errors in the job log but the DSO was still inactive. On trying to manually activate it , its stated that the BI Dev client was inactive. So I went to the Source Sytems tab, activated the BI client but it failed showing the following error messages:
1.EDI:Partner profile not available-> A partner profile could not be found with the following key:/IBDCLNT010/LS/
This involves the key fields of the table EDPP1: PARNUM.PARTYP
2.Entry in outbound table not found-> A partner profile could not be found with the following key:/IBDCLNT010/LS/RSRQST///
This involves the key fields of the table EDP13:RCVPRN,RCVPRN,RCVPFC
3.Entry in inbound table not found........LS/RSINFO :
4.Similar to error 3 :...../LS/RSSEND
5.Destination IBDCLNT010 has incorrect Unicode settings,adjust it to destination:
The unicode settings do not match the source systems.Conversion errors might occur during data transfer.Adjust the destination accordingly.
Has anybody seen this error log before. If so please do let me know your valuable suggestions.
Thanks for taking the time to read this technical concern
Edited by: Prathibha Pillai on Jul 29, 2008 7:58 AM

Hi,
As of 1-4 error messages.
You must define in partner profiles (ts WE20) the message type RSRQST as outbound on BI side and inbound on R/3 side, the message types RSINFO, RSSEND as inbound on BI side and outbound on R/3 side.
Regards,
Alexander

Getting current date without using client's clock

Is there a way to get the current date without using client's clock?
The java application we developed has many windows on which the Current Date is an important display field. As it's used 24x7, we need to make sure the date is current.
Right now, we make a CORBA service call to get the date from the server everytime the user Resets any of these windows. This is causing a peformance issue due to the slow service call.
Is it possible to get the Date once from the server and then start a timer to derive the date thereafter. Will a change in the client's clock affect this logic ? Can we implement this without using client's system time.
Or is there another better way ?
Thanks for your help.

If I can summarize your current requirements:
1. You need to know the time.
2. You don't trust the client's clock so you want to get the time from another computer.
3. You want this access to be "not too slow".
I find requirement number 2 to be peculiar, I've never seen an application that doesn't accept the time on the client system as valid. However, there it is. Maybe it's a system for checking employees in and out, and the smarter ones have been faking out the system by changing the clock. If your CORBA connection is too slow, and NTP is too slow (it takes the little program I got from USNO about 3 seconds to synchronize my clock), why not write your own time server? A simple web server that returns only the time to any request would work. If that's not fast enough then I'd suggest you're out of luck.

How to verify employee data

Hi Gurus,
Please i need assistance, my client wants when entring employee data in personnal data, his boss should check his entries and veryfy that it is ok during hiring, this is to check if he has made some mistakes in his entries,
How can I set his employee data to get to his boss for verification and approval after enries has been made?
Tanx.
Maureen.

Hi,
Simply you have to maintain Personnel Administrators as bosses and after the hiring action workflow will be trigered to the bosses that new employees have been hired under them. After that Bosses can check the personnel Data in PA 30.
Regards,
Kapil

After transportation into prod datasource showing under DEV client

Hi Frnds,
I am transporting a cube with data flow before. After successful transportation of the objects Datasource showing is under DEV client not under Prod client.
What might be the problem? Whether Am I missing any steps?
Regards,
sridhar

Hi,
There should be 2 Columns: 1) Orginal Logical system: Here you should enter the Source system's Logical name of BI DEV System( i.e DEV R/3 )
2) Target Source system :Here you should enter the Source system's Logical name of BI Prod System( i.e Prod R/3 )
Regards,
Anil Kumar Sharma .P

Proc_getObject with nolock causes "read operation on a large object failed while sending data to the client"

SharePoint 2013 code for the SharePoint Config database stored procedure dbo.proc_getObject has been changed from SharePoint 2010 with the difference of select with nolock.
I am seeing numerous Error 7886, Severity-20 errors nightly:
"A read operation on a large object failed while sending data to the client. A common cause for this is if the application is running in READ UNCOMMITTED isolation level. This connection will be terminated."
Here I have commented out "with (nolock)" to 'fix' the error and to align the store proc with SharePoint 2010 code :
ALTER PROCEDURE [dbo].[proc_getObject]
@Id uniqueidentifier,
@RequestGuid uniqueidentifier = NULL OUTPUT
AS
SET NOCOUNT ON
SELECT
Id,
ParentId,
ClassId,
Name,
Status,
Version,
Properties
FROM
Objects --with (nolock)
WHERE
Id = @Id
RETURN 0
How is this stored procedure called and for what use?
Why did Microsoft make this change to SharePoint 2013 - some performance gain through dirty reads at the cost of stability? Or what could be a reason for this to happen that can be fixed?

GetObject retrieves any farm object that is selected (by ID). Changing this is obviously not supported, and NoLock was used to (help) prevent locks when performing a select query.
I've never seen this issue, and would guess it is unique to your environment given this is such a core piece of the SharePoint infrastructure.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

For existing data in BI, client need to take a call to park the same from s

hi,
friends,
For existing data in BI, client need to take a call to park the same from safety point view by copying the existing ODS
is it possible?if it is possible give me details.
thanks&regurds
sivaji

hi,
well when you copy an ODS only the structure is copied. to load the data you might need to create transformation and DTp to load data in the new ODS.
You need to load data manually. Copying the ODS will only copy the structure.
Regds,
Shashank

How to transfer data from one client to another client

Dear Experts,
Please explain how to transfer data (Materials) from one client to another client?
Thanks,
Ajay Kumar

Hi Ajay,
Check any of below methods
Refer thread http://scn.sap.com/thread/171981 where people use IDOCs for master data transfer.
OR
This is done by BASIS team, by client refresh or client copy. Check with your basis team for this and there is some predefined time when they plan this activity, and in most project they do it once in 3 months etc to get production environment in test system which helps to resolve issues of production by creating similar case in test system.
Check below threads for more information
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/cleint-copy-vs-client-refresh-1377848
http://basissap.blogspot.in/2008/05/what-is-client-copy.html
OR
You can download data from one client and upload in another through BDC or LSMW.
Regards,
Sharat

Error while fetching data from OWB Client using External Table.

Dear All,
I am using Oracle Warehouse Builder 11g & Oracle 10gR2 as repository database on Windows 2000 Server.
I facing some issue in fetching data from a Flat File using external table from OWB Client.
I have perform all the steps without any error but when I try to view the data, I got the following error.
======================================
RA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04040: file expense_categories.csv in SOURCE_LOCATION not found
ORA-06512: at "SYS.ORACLE_LOADER", line 19
java.sql.SQLException: ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04040: file expense_categories.csv in SOURCE_LOCATION not found
ORA-06512: at "SYS.ORACLE_LOADER", line 19
     at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
     at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:110)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:171)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1030)
     at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:183)
     at oracle.jdbc.driver.T4CStatement.executeForDescribe(T4CStatement.java:774)
     at oracle.jdbc.driver.T4CStatement.executeMaybeDescribe(T4CStatement.java:849)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1186)
     at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1377)
     at oracle.jdbc.driver.OracleStatementWrapper.executeQuery(OracleStatementWrapper.java:386)
     at oracle.wh.ui.owbcommon.QueryResult.<init>(QueryResult.java:18)
     at oracle.wh.ui.owbcommon.dataviewer.relational.OracleQueryResult.<init>(OracleDVTableModel.java:48)
     at oracle.wh.ui.owbcommon.dataviewer.relational.OracleDVTableModel.doFetch(OracleDVTableModel.java:20)
     at oracle.wh.ui.owbcommon.dataviewer.RDVTableModel.fetch(RDVTableModel.java:46)
     at oracle.wh.ui.owbcommon.dataviewer.BaseDataViewerPanel$1.actionPerformed(BaseDataViewerPanel.java:218)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
     at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
     at javax.swing.AbstractButton.doClick(AbstractButton.java:282)
     at oracle.wh.ui.owbcommon.dataviewer.BaseDataViewerPanel.executeQuery(BaseDataViewerPanel.java:493)
     at oracle.wh.ui.owbcommon.dataviewer.BaseDataViewerEditor.init(BaseDataViewerEditor.java:116)
     at oracle.wh.ui.owbcommon.dataviewer.BaseDataViewerEditor.<init>(BaseDataViewerEditor.java:58)
     at oracle.wh.ui.owbcommon.dataviewer.relational.DataViewerEditor.<init>(DataViewerEditor.java:16)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
     at oracle.wh.ui.owbcommon.IdeUtils._tryLaunchEditorByClass(IdeUtils.java:1412)
     at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1349)
     at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1367)
     at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:869)
     at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:856)
     at oracle.wh.ui.console.commands.DataViewerCmd.performAction(DataViewerCmd.java:19)
     at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
===========================
In the error it is showing that file expense_categories.csv in SOURCE_LOCATION not found but I am 100% sure that file is very much there.
Is anybody face the same issue?
Do we need to configure something before loading data from a flat file from OWB Client?
Any help would higly appreciable.
Regards,
Manmohan Sharma

Hi Detlef / Gowtham,
Now I am able to fetch data from flat files from OWB Server as well as OWB Client.
One way I have achieved as suggested by you
1) Creating location on the OWB Client
2) Samples the files at client
3) Created & Configured external table
4) Copy all flat files on OWB Server
5) Updated the location which I created at the client.
Other way
1) Creating location on the OWB Client
2) Samples the files at client
3) Created & Configured external table
4) Copied flat files on the sever in same drive & directory . like if my all flat files are on C:\data at OWB Client then I copied flat file C:\data on the OWB Server. But this is feasible for Non-Windows.
Hence my problem solved.
Thanks a lot.
Regards,
Manmohan

Employee Data for Business Partner

Hi All,
I am using BAPI_BUPA_CREATE_FROM_DATA as a Function Module in a program to create Business Partners by reading data from an Excel file.I am able to create business partners but I couldn't find the BAPI using which I can add Employee data for "Employee" role of a new Business Partner.
Can anyone help me out in this regard.
Kind Regards,
Deepti

Hi Deepti,
You can see if the function module BAPI_BUPA_FS_EMPLOYM_ADD is more appropriate for you.
Regards
Venu

Saving data in a database and publishing data to multiple clients

Hi there. I'm using a bunch of Compact FieldPoint modules to read out a few hundred voltages, temperatures, currents, etc. I acquire this data at about 1 Hz (pretty slow). I would like to record this data to some sort of database on a cpu (running LV 8.0, connected to the FieldPoint mods), and serve the data to multiple (between 10 and 50) clients over the net, each running a compiled stand-alone "data grabber and viewer" application (which I'll have to write of course). I'd like these external clients to basically be able to pick a certain variable from the database, and plot it for the last week (or something like that). Presumably the standalone client would send some database query to the server. The server would then send the data to the client, and the standalone client would receive the data and plot it as the user sees fit. My question is how to implement this database? Should I use the LabView "Database" Add-On to create a database to store the data? Is it better to just store the data as binary and write my own data fetching routine to handle queries? How can I write this database to disk for permanent storage? Could this database be accessible outside of LabView?
Any help on this would be appreciated. Thanks!
Jesse Wodin
Post Doctoral Researcher
Stanford Linear Accelerator Center
650-504-2512

Hi Jesse,
The Citadel database is not a relational database. It's highly optimized for storing lower-rate (non-waveform) channel-by-channel, or "trace" measurement data. Another option you can consider is using DSC and Citadel on the server then writing a utility to export the data from Citdael to an SQL database. --That would solve the problem of having to write a logger application from scratch. You would only have to write the relatively simple application to export the data from Citadel and import it into a relational database.
You could accomplish this two ways. First, DSC includes a set of VIs that will retrieve historical data from Ciatdel. You could use LabVIEW to parse this data and write it to a table in a relational database. Second, Citadel actually includes a locally accessible ODBC interface. (You can query Citadel using an SQL query from the local computer). You could query Citadel using this interface, then write the result to a table in a relational database.
To view Citadel in its native format or query a Citadel database using ODBC from a remote comptuer that comptuer would need to have a licensed DSC RTS installed.
~~

How to handle multiple DEV clients in CHARM

Experts:
We have many DEV clients in our ECC landscape.
Some customizing needs to be imported into all DEV clients.
In order to use CHARM to do above import into different DEV clients, I want to define some logical components with only
2 systems, i.e. source DEV client and target DEV client (e.g. DEV100->DEV200). Then link this logical component to a
project.
In this way we will define many projects (logical componets, maintenance cycles) depending on how path combinations existing on the STMS setup.
Could you help verify whether this will work as expected? Because I did not configure 2 system tp for CHARM before therefore I am not sure.
Thanks a lot!

Hi,
you should take a look to those 2 threads especially the second one IF those other clients are USED FOR CREATING TR:
Re: Multiple clients in DEV and QA for CHARM setup
Change Request Management for multiple production clients
IF the other clients should just be synchronized with custo done in the first one then the lines above will help you.
Important fact "A Solman Project can have more than a logical component."
So for example in your case if you are trying to update DEV 200 with DEV 100 when importing TR to quality system (200 must be a kind of reference client for you),
you ll simply have to declare a Solman Project containing the core logical component (for ex: DEV 100 -> QUAL 100 -> PRD 100) AND another one that ll let you import in DEV 200 (DEV 100 -> DEV 200).
In your generated tasklist you'll then find DEV 200 under Target Systems node; like if it was a QUAL system AND you ll find tasks as "Import Transport Requests" available for DEV 200.
As a prerequesite you MUST declare DEV 200 in your logical component as a Target Role System and not as a Source Role System (like DEV 100) (Transaction SMSY). Otherwise Solman will understand that DEV 200 will be used only for creating and releasing TR and it will be considered like DEV 100
Hope it helps
Keep me updated with how it goes
Regards
Khalil

BAPI name to access employee data from systems like CSS, ISP GTP etc

Hi All,
Could you please suggest which BAPIs we need to use to access employee data from systems like CSS, ISP GTP etc
Regards,
Poonam
Moderator message: Welcome to SCN!
Moderator message: please do more research before asking, show what you have done yourself when asking.
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on May 20, 2011 2:09 PM

Hi All,
Could you please suggest which BAPIs we need to use to access employee data from systems like CSS, ISP GTP etc
Regards,
Poonam
Moderator message: Welcome to SCN!
Moderator message: please do more research before asking, show what you have done yourself when asking.
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on May 20, 2011 2:09 PM

Employee Data in Dev Client

Similar Messages

Maybe you are looking for