Employee details not replicated in Sales Oredr from crm to r/3

Dear Experts,
There is an error related to the sales order modification in
CRM to ECC(R/3).
While creating the SO liaison employee and sales employee is
given and it’s replicated properly in R/3.
Modify the same sales
order for e.g.-quantity, delivery date, value the changes gets updated in sales
order perfectly in CRM as well as in ECC , but the details of liaison employee
and sales employee gets deleted from the partner tab in sales order .while
checking the change log its shows deleted.
Modification made in the same sales order for 2nd
time for e.g.-quantity, delivery date,
value the changes gets updated in sales order perfectly in CRM as well as in
ECC and the details of liaison employee
and sales employee replicated perfectly in partner tab of sales order.
Kindly advice.
Regards,
shachi

Similar Messages

Replication of BP and Sales order from CRM to R/3

Hello everyone,
I have a peculiar condition in my hands.The requirement is to replicate 10 business partners from crm to R/3 ,then the next 4 Business partners need not be replicated and then the next three replicated..How do we do this kind of replication....
One thing more regarding the replication of sales order.When we save a sales order in CRM,is it automatically replicated to R/3 or do we need to release it manually??
If yes,then if we do not want to replicate the sales order from crm to R/3,then what will we do?
Consider that all the middleware settings are configured and working fine..
Puneet

Hi Bokhal,
Please consider my answer from your recent thread dealing with apparently the same issue :
Hi Bhokal,
For filters in uploads please consider below:
For Filtering the BP-upload, use the Administration Console
(tx. SMOEAC) in the corresponding subscription of the "All Business
Partners (MESG)" publication assigned to the R/3 site.
Some publications (and the replication objects they are based on) are
delivered as type "Simple bulk" which does not give you the opportunity
to assign criteria values for filtering.
You might have to re-create the publication. To do that:
1) First delete the subscriptions "All Business Partners (MESG)" and its
publications & the replication object.
2) Recreate the replication object as type "Simple intelligent".
3) Afterwards you can create a new publication via wizard of type
"Simple intelligent (msg)" assigned to the BDOC-Type BUPA_MAIN. Then,
you will be able to select some "filter criteria".
The reason for deleting the "old" publication is, that you
are not allowed to assign a BDOC-Type to more than one publication.
4) But please keep in mind that there is no realignment supported. So
you should only use fields for filtering, which cannot be changed
afterwards.
This is the "simple" solution for filtering on fields. This
will not provide complex filter criteria.
If you need this, you shall create a filter function in R/3- and/or
CRM-Inbound and -outbound.
If you want to keep the control about the upload trigger, you can add an
additional module in transaction CRMC_BUT_CALL_FU, position > 200000.
BUPA_MWX_BDOC_BPS_FILL_CENTRAL. Within this new module, you can delete
all partners within the complex structure that you don't want to upload.
Hoping that above will be helpful.
Best regards
Christophe Sturzel

Mass sales orders from CRM to ECC

Hi,
We have a requirement to mass upload sales orders from CRM system ECC system. I could not able to find any option to push sales orders in bulk from CRM to ECC.
Could you please let me know if you know any kind of solution for this kind of scenario.
Thanks in advance!
Regards,
Kumar B.

Hi Maggie,
Thanks a lot for your response. But I could not able find CRMD_MASS_UPDATE in CRM system as well as in ECC.
Could you please let me know how to try this other please let me know the program or tcode.
Regards,
Kumar B

Error in replication sales order from CRM 5 to ECC 6

Hi,
I am new to the middleware
When I am trying to replicate the sales order from CRM 5 to ECC 6, i found the following error in SMW01 R/3 adapter is called
Message no. CRM_ORDER_MISC024
I am unable to track what may be the problem and even I have checked the SMQ1 & SMQ2 in both CRM and ECC but nil.
Can anybody help me out?
Thanks in advance

Hi Binu,
Try check also the SMQ1 & SMQ2 on R/3 when you start trigger the
document transfer from CRM to ECC. If you cannot see any similar document
appear here, seems like your Middleware filter has not properly set.
Check Middleware filter for document transfer, if I am not mistake, the object
is SALES_DOCUMENT.
Just check, if there filter which block the document to be sent to R/3.
Hope this helps.
Gun.

Download Sales Office from CRM to CDB

Hi all,
I am trying to download the replication object DNL_CUST_S_OFFI (sales office) from CRM to CBD. However, there is no such load object available when i try to run in R3AS. I got the error There is no object definition for object when load in R3AS. May i know what is the correct adapter object name for this replication object DNL_CUST_S_OFFI?
Thanks

Hi,
Make sure Sbdoc DNL_CUST_S_OFFI is active and generate services for it using SMOGGEN. Then the data will be written into CDB tables like SMOTVKBT/SMOTVKBZ(I'm not sure about the exact one)
Then do an extract of the object DNL_CUST_S_OFFI to download the data to the client.
Goto smoeac : filter the mobile sites : Click the requisite mobile site and Start an extract : Select Customizing Objects (double click)
Now you'll get a list of replication objects : Select the bulk Replication object DNL_CUST_S_OFFI and start extract.
Tnx.

Creating ERP Sales Order from CRM 7.0

Hi Experts,
We are implementing the scenario-Creating ERP Sales Order from CRM. My doubt is:-
Do we need to download the entire product data from ECC via middleware to implement this functionality?
Is it possible that we manually create few products in CRM with same heirarchy and category and avoid middleware data download?
My basic doubt is-what product information is passed to ECC from CRM when we create the ECC Sales Order? If only product id is passed, then we can avoid middleware data download for product from ECC to CRM.
Can anyone please provide me some pointers on this? What should be the approach-download product data from ECC to CRM or manually create product data in CRM?
Thanks and Regards,
Rohit

I´m trying to figure out the ERP Sales Order Scenario in CRM, i found the following link (sap.help) to customize the ERP sales Order in CRM, it´s a quickly guide supported by SALESPRO but in my case does not work, if somebody knows how to retrive the Order in IC i´ll appreciate.
Here a quick Guide -->
Prerequisites
You can directly create and change an ERP sales transaction in SAP CRM once you have carried out the following:
You are using SAP ERP for your Quotation and Order Management.
You are using SAP CRM.
You have assigned the relevant ERP sales transactions to a profile.
You do this in Customizing for CRM, by choosing Customer Relationship Management Transactions Settings for Sales Transactions Define Profile for ERP Sales Transactions .
You have defined an RFC destination.
You do this in Customizing for CRM, by choosing Customer Relationship Management CRM Middleware and Related Components Communication Setup Define RFC Destinations .
You have defined a business role by copying the standard business role SALESPRO to your own. You make this setting in Customizing for CRM, by choosing Customer Relationship Management Business Roles Define Business Role .
You have defined cross-system copy control of transaction types.
You do this in Customizing for CRM, by choosing Transactions Settings for ERP Transactions Maintained via CRM Cross-System Copy Control for Opportunities and ERP Transactions
I want to see the screens or video regarding with this scenario.
Regards,
Memo

Replication of Business partner and the Sales document from CRM to R/3

HI All ,
I am completely new to this CRM technical , I need some technical document on how can I replicate BP and sales documents from CRM to R/3 through CRM middleware .
Please help me out in this regard .
Regards
Debasri Sarkar

Hi Debasri
It would be best if you try the Best Practices available on [CRM Best Practices|http://help.sap.com/content/bestpractices/crossindustry/bestp_crossindustry_crm.htm]
Choose the CRM Version you are working on. On the next page that opens up, choose Technical Information-->Building blocks from LHS.
And you can use the Best practice guide titled CRM Master and Transaction Data Replication there to know more about BP and transaction replication between CRM and ECC.
Hope this would help You
Regards
Rekha Dadwal-Shet

Business partner(employee) is not replicated from ECC to CRM

The Business partner Not replicated in CRM.Two Sales organization have been maintained for the employee for the different time lines in ECC.Checked the BDOCs and the validation error occur in FM CRM_BUPA_MAIN_VAL .The BDOCs message was saying the BPGUID was missing .Could anyone please suggest what could be the root cause of the data not replicated from ECC to CRM.

Hi Pragnya,
This is the case where at the time of creation of BP there was some issue with replication.
The BP itself is not there in CRM or only the changes are not reflected?
In such scenarios, perform following steps for successful replication:
1. Go to TCode: CRMM_BUPA_MAP
2. Enter the BP no. {initially it says it does not exist}
3. Enter ERP customer no. and press enter, the BP GUID gets filled
4. Click on "Gather Information about customer" [you can see the status of the object]
5. Now again enter the BP no. -> The customer is available in CRM now.
Regards,
Swagi

Payment card details not replicated from CRM to ECC

Hello
We are creating BP in CRM which replicates into ECC. In BP, we are maintaining Payment cards. But, while replicating to ECC, this Payment card details are not replicating to ECC.
The data is present in the BDoc.
Please help!!
Regards,
Debolina

Hi Debolina,
Can you please share the solution. I have the similar requirement.
Regards,
Vaibhav

Sales orders from CRM are not getting blocked with credit check

Hi All
I have configured ECC in such a way that , if cutomer does not have enough creditlimt, then those sales order will get blocked. Our orders will come from CRM, and some times some orders are not getting blocked with credit check even though the customer does not have credit limit. And at the same time some orders are blocked with credit check...what are all the things that should be checked to diagnose the problem.
Thanks in advance for looking into this

Please check if you have any custom code/user exit in ECC which uses transaction code (VA01 , VA02 or VA05 etc) prior to invoking credit checks.
Orders created via CRM will not have transaction code set (SY-TCODE).

Billing Plan Start Date not copied to Sales order from Service Contract

Hi
We are developing a process of Creation of Service Contract and then a order confirmation.
Now based on the Order Confirmation will bill based on the Bill Plan.
The Bill plan start date in contract header is not flowing to Sales Order header while creating with reference.
Then navigating to Header Billing plan and if we input the date the billing plan dates are displayed.
We checked the copy control settings and seems like the date is not copied.Is this a standard behaviour.
If so then do we have any work arounds to achieve the same. Because the contract start date can change before confirmation.
So business wants a sales order confirmation to be created after contract creation and bill periodically as per the Sales order instead of contract.

Hi,
Appreciate ur quick response. But instead of FKDAT i need the FPLA-BEDAT to be flowed to Billing Plan.Right now iam entering the following date manually at header.Instead if it copies from Contract header then manual entry could be neglected.
Is it possible with the same routine to code with the above mentioned FPLA-BEDAT.

Meet a problem of data exchange for sale order from CRM to R3.

Dear Friends:
      I do the data exchange for sale oder from to R3 today , the problem's detail is as follows:
      When i save a sale order in CRM (Version is 5.0) . it can automatically generate a bdoc which bdoc type is BUS_TRANS_MSG. but the bdoc status alway is "Sent to receivers (not all have confirmed)". and the original order in CRM can not be change .it quote that "Document is being distributed - changes are not possible", so i check the order status analysis in detail .it presents two error messages ," Event 'BEFORE_CHANGE', attribute '     FINI': Error code for function module 'CRM_STATUS_BEFORE_COMPLETED_EC' , "Item is not yet completed in OLTP system". so i check the order in R/3 ,it has already been create and without any error messages.
   Would like to tell me how to solve it . thanks your any idear..

Hi Benjamin,
When performing uploads to R/3 from CRM there is a response from the OTLP system that is sent back to the CRM Middleware to confirm that the data records were received and processed correctly.
Here is a checklist you can run through to verfiy that the connections, systems and objects that are needed are all in place:
<b>On R/3 system:</b>
- Check R/3 outbound queue (transaction SMQ1) for any entries that are not reaching CRM.
- Check that all RFC destinations on R/3 are defined correctly and are pointing to CRM
- Check the CRMCONSUM table in R/3 to ensure CRM is registered as a consumer
- Check the CRMRFCPAR table in R/3 to ensure that order objects are valid for exchange between R/3 and CRM
- Check for any short dumps in R/3 (ST22/ST21)
<b>On CRM:</b>
- Are there entries stuck in the inbound queue (SMQ2) with R3AU* names?
- What does the CRM Middleware Trace show (SMWT)? Sometimes this has more detail than the specific BDoc overview (SMW01)
- Check for short dums in CRM (ST22)
Let us know what else you uncover and we can work from there.
Brad

Replication of Sales contract from CRM to R/3

Hi Experts,
I have a requirement of replicating the created sales contract in CRM to the R/3 system through Middleware in 2007. In the standard way replication of R/3 contract to CRM is only possible. Here the BDOC used in BUS_TRANSACTION_MESSAGE and there is no mapping modules present for CRM to R/3.
Is it wise to create a custom adapter and use the fm CRM_BUS_MESSAGE_R3_UPLOAD_SRV as the mapping module and enhance the BADI CRM_BUS20001_R3A?
Please throw me some light on how to proceed with the development.
Yours answers are greately appreciated!!
Regards,
Suthagar.

Hi Kai,
Its the normal sales contract with the Pricing aggreements. In SAP help, I found a note saying Note that you cannot download CRM contracts to the SAP ECC system
please find the link [http://help.sap.com/saphelp_crm60/helpdata/en/7a/e486398dcfd74fe10000000a11402f/frameset.htm], the note can be found in Data exchange for sales contract under the Sales contracts.
Also on the transaction R3AC1 with the sales contract type, the mapping from CRM to R/3 is blank.
If it is possbile to replicate from CRM to R/3, please let me know the steps to acheive it.
Thanks for your help.
Regards,
Suthagar.

How to Resend the sales documetn from CRM

Dear frds,
I have a Sales Document replicated from CRM to R3. And in R3 the document has been deleted manually by the user. But it was accidentally.
Now is there anyway to resend the same document from CRM to R3? I tried saving it again so that it generates the document but it did not help.
does any one have any idea??
Thanks and regards,
Dinesh.

Hi Dinesh,
    I hope you are getting message "Sales document is deleted or archived" in CRM order Log.
    When you try to resend this order to ECC after saving, you will get the same message. This is due to inconsistent status in CRM_JEST table.
    Follow below procedure to resend this order to ECC,
Go To se16, and change the entry in table CRM_JEST for
                OBJNR = <GUID of Order>
                STAT = I1006
                INACT = <Change it to X>
     Repeat this for all line items change the objnr with line item guid.
    Go to order in CRM and do same changes and hit save. Now it should replicate to ECC.
//Bhanu

Consignment Sales scenario from CRM?????

Hello Expertise
I am facing a problem of handling the consignment sales scenario using SAP, how can I use the consignment scenario using CRM? If this function is not supported in CRM so I can create it from SAP ERP but can I display and change this ERP Sales order from the Customer History in CRM?
Thanks in Advance
Jacopo Françoise

Hi Jacopo,
Are you using the IC? We implemented the agent inbox to go look at past ERP sales orders. Can be configured to get this data.
Of course there are many ways to skin a cat, so you could use activity categories or something similiar. So that every activity linked to the ERP sales order has the same category you can easily see this in the customer history.
Another idea maybe extending the worklist used in salespro. Haven't used this so unsure.
Cheers
Andrew

Employee details not replicated in Sales Oredr from crm to r/3

Similar Messages

Maybe you are looking for