Employee Discount: Data Discount MISSING

Hello,
After reviewing my recent bill, I have noticed that there was no Employee discount applied towards my qualifying Data plan.

It should - why not?!
It's over $24.99 and it is not unlimited
It is not stated anywhere in the message, a plan like that does not qualify

Similar Messages

Data discount denied

I am writing because I am being denied a 12% employee discount on data on one of the lines of my plan. I am getting an 8% discount on the main access charges, but I should be getting an additional 12% discount on the data charges for one line as well. I was getting the discount previously but it was abruptly dropped without notification. I am told by reps that this is “probably” due to the fact that the line that was getting this discount is already getting a bonus feature of 6 gb plan at $30/ mo. (the Verizon Max plan) and this is already considered a “good deal.” That should not matter; the 12% discount is an employee discount I am rightfully owed regardless of what the base plan is. I got it before, I should get it again. I’ve spent countless frustrating hours on the phone with no resolution except a "research form" that was filled out. Reps are no help and this one had a bad attitude and wouldn't let me finish my sentences. I ask that you do what is right and reinstate the 12% discount on one of the lines as per the terms of the employee discount agreement with you.
Private info removed as required by the Terms of Service.
Message was edited by: Admin Moderator

While I cannot find the actual press release, HERE is an article which mentions that Verizon will no longer offer discounts on data below a $50 data tier. This was instituted back in 2011 when Verizon no longer offered unlimited data for new lines of service and you had to choose a minimum data tier of 2 GB for $30. At the time, you had to go with a data tier of at least $50 for 5 GB to qualify for an employer discount.
Since Verizon has switched to Share Everything and subsequently More Everything, I can't find the actual wording on Verizon's site, but I would assume they have not rescinded the $50 minimum on data discounts. Currently, I have a discount on my 3 GB/$60 More Everything data tier, but I can only assume if I drop below the $50 tier I would no longer receive a discount on my bill.
Excerpt from the article.
BUSINESS DISCOUNTS- Currently our business discounts apply to the $29.99 data plan on the primary line only. Most discounts are 20% despite whatever monthly access discount they have
BUSINESS DISCOUNTS- After 7/7/2011 data discounts will only apply to the $50 and higher data packages on the primary line.
Discount break down ex. of customers with a 20% feature discount on their primary line. ($50-20%=$40/month for 5GB and includes the business e-mail feature)

Function Module for Discount Date

Hi,
Can somebody tell me whether there is any function module for determining the Discount Date (DATS) and Payment Due Date(DATS) based on Payment Terms (ZTERM)?
Thanks,
John.

FI_FIND_PAYMENT_CONDITIONS
DETERMINE_DUE_DATE

Payroll not possible because data is missing: WPBP: 01 SV: 00 ST: 00

Hi,
I have created a new org structure with a set of employee. I have maintained all the needed infotypes ( 0000,0001,0003,0007,0008..)
When i try to run payroll for those emp's, im getting the error message:
<u>Payroll not possible because data is missing: WPBP: 01 SV: 00 ST: 00</u> under rejected personal numbers.
What setting i have to do inorder to run payroll.
Rgds,
Ven.

Hello,
How absen quota 2006 is related to payrun..
However i have maintained all the said infotype, but still get the error .
Rgds,
Ven.
Message was edited by:
ven onk

Employee Master Data - Banks do not show up

Hi all,
On the employee master data, when I want to choose the bank for the employee, the list doesn't show up on the drop down menu, just "Define New".
But this issue only happens with some employees, on the others the bank list shows up.
Anybody have any idea?
Thanks,
Pedro Santos

Hiii Pedro
Check this SAP Note1112098, relates to your issue
which says
Bank Details missing in the Employee Master Data
Symptom
In the Human Resources -> Employee Master Data -> Finance tab, nothing appears when you select the drop down list in the 'Bank' field. Why is this?
Other terms
Employee, finance, bank, bank details, branch, account, human resources, HR, SAP Business One
Reason and Prerequisites
Consulting
Solution
In order to select the 'Bank' in the 'Employee Master Data', you need to firstly define the 'Home Address Country' in the Address tab -> Home Address area.
Once done, you can now choose the Bank ID in the 'Finance' tab and
fill in the rest of the fields (Account No, Branch).
Rizz

Employee master data replication error

Dear experts,
Please help on the issue, as we are doing the UAT test next week.
When doing the employee master data replication on test tenant, everything works fine, the replication status is green. But when doing the employee replication on production tenant, replication status is red, and system gives error message:
Company of employment missing for remote employee XYZ.
We check the Employee in Replication Request, and go to the Employment tab, the Company ID is missing there on PRD tenant.
But we check the table OTM_HREE_C01 on ERP PRD and Test tenant , everything looks the same, also the Configuration in report OTM_TRIGGER_EMPL_REPL_CE, everything seems to be the same there.
Could you please let us know what went wrong, and what else to check?
Thanks!
Best regards,
Wendy

Here's some things that I would check:
- Make sure idoc includes the company code for the employee <E101OTM_S_EMPL_EMPLOYMENT> <COMPANY_CODE>
- The assigned cost center of the employee must belong to the same company code this employee is assigned to.
- Review the company code set-up to make sure it is complete
- The communication arrangement to make sure it is complete

Urgent help needed: registry.dat is missing when i run my form in web base

Hi gurus,
i configured my forms and report server in windows 2003 and i received the following error msg when tryin to access my web base forms 6I.
FRM-92129: Registry file http://domain.com/form60java/oracle/forms/registry/Registry.dat is missing.
Details...
Java Exception:
oracle.forms.engine.RunformException: FRM-92120: Registry file http://domain.com/form60java/oracle/forms/registry/Registry.dat is missing.
at oracle.forms.engine.Runform.initRegistry(Unknow Source)
at oracle.forms.engine.Runform.startRegistry(Unknow Source)
at oracle.forms.engine.Main.createRunform(Unknow Source)
at oracle.forms.engine.Main.start(Unknow Source)
at sun.applet.JinitAppletPanel.run(Compiled code)
at java.lang.Tread.run(Thread.java:466)
what can be goes wrong with my steps to receive the above error?? i tried in windows XP and Vista, and i getting the same error message as above.
Your urgent help and advise is needed plssssssss.......
Many thanks in advance.

The URL doesn't seem correct: http://domain.com/form60java/oracle/forms/registry/Registry.dat
I'm expecting a slash (/) between forms60 and java. Have a look in the formsweb.cfg if any paths are misconfigured.
Also, try if the URL with the slash:
http://domain.com/form60/java/oracle/forms/registry/Registry.dat
does work when you just paste it in a browser. It should download the Registry.dat file

FRM 92120 Registry dat is missing

The error> FRM-92120 <to log into an EBS instance and click on a Form (with all the forms).
------- error ------
FRM-92120 Registry file http://hhh.xxx.com.br:8000/OA_JAVA/oracle/forms/registry/Registry.dat is missing
Details:
Java Exception:
oracle.forms.engine.RunformExeception: FRM-92120:Registry file http://hhh.xxx.com.br:8000/OA_JAVA/oracle/forms/registry/Registry.dat is missing.
at oracle.forms.engine.Runform.initRegistry(Unknow Source)
at oracle.forms.engine.Runform.startRunform(Unknow Source)
at oracle.forms.engine.Main.createRunform(Unknow Source)
at oracle.forms.engine.Main.start(Unknow Source)
at sun.plugin2.applet.Plugin2Manager$AppleExecutionRunnable.run(Unknow Source)
at java.lang.Thread.run(Unkwon Source)
I have done the following steps
----------------------------------------------------- >>>> http://finance-kc.gsa.gov/webbill/faq.shtml#l10
Step 1: Verify that SSL v2.0 and v3.0 options are checked in Java Control Panel.
a. Click 'Start' menu on Windows taskbar and select 'Control Panel'. If you do not find 'Control Panel' directly under 'Start' menu, then you should find it under 'Settings'
b. Locate an entry named 'Java' on Control Panel window and double click on it
c. Click 'Advanced' tab on Java Control Panel window
d. Locate setting named 'Security' and click on the plus sign prefixing it to show options
e. Verify the option 'Use SSL 2.0' is checked and if not check it
f. Verify the option 'Use SSL 3.0' is checked and if not check it
g. Click 'Apply'
h. Click 'OK'
Step 2: Close your browser session.
Step 3: Open a new browser session and try the register or login action again to see if it works okay. If not, proceed to next set of steps.
Step 4: Re-start your computer.
Step 5: Open a browser session.
Step 6: Clear your browser temporary Internet files by taking the steps stated below.
a. Select 'Tools' from Internet Explorer browser menu
b. Select 'Internet Options'
c. On the 'General' tab, under section labeled 'Temporary Internet Files', click 'Delete Files' button
d. Click 'OK' on Delete Files confirmation box
e. Upon completion of delete files, click 'OK' on Internet Options
Step 7: Close your browser session.
Step 8: Open a new browser session and try the register or login action again to see if it works okay. If not, proceed to next set of steps.
Step 9: Clear your Java temporary Internet files by taking the steps stated below.
a. Click 'Start' menu on Windows taskbar and select 'Control Panel'. If you do not find 'Control Panel' directly under 'Start' menu, then you should find it under 'Settings'
b. Locate an entry named 'Java' on Control Panel window and double click on it
c. On the 'General' tab, under section labeled 'Temporary Internet Files', click 'Delete Files' button
d. Click 'OK' on Delete Files confirmation box
e. Upon completion of delete files, click 'OK' on Java Control Panel
Step 10: Close your browser session.
Step 11: Open a new browser session and try the register or login action again to see if it works okay. If not, provide the following to the help desk: the browser name and version used, Java plug-in version used, sequence of events leading up to the issue or problem being reported and any message displayed in a screenshot or text format and/or describe browser behavior that will help us with troubleshooting.
====================================================================================================
And also did not resolve the error then appealed to the Deployment Guide in página157 --http://otndnld.oracle.co.jp/products/forms/htdocs/install/Materials/doc/EN/B14032_02.pdf
A.2.3.6 FRM-92120
Cause:
This is a server configuration error, which occurs when the client is unable to find the
file Registry.dat on the middle tier.
Solution:
When this error occurs, check if the file Registry.dat is present on the middle tier in the
directory ORACLE_HOME/forms/java/oracle/forms/registry. If it is not
present, then it needs to be placed.
In a running Forms application, if you suddenly come across this error, there is a
possibility that the HTTP server has gone down. You may verify this by typing the
Diagnosing Server Crashes with Stack Traces
A-8 Deployment Guide
URL http://myserver.com:NNNN in your browser. Here you need to replace
myserver.com with your host name and NNNN with your HTTP server’s port
number. If your browser says that it could not connect to the server, then your HTTP
server is down and you need to contact your system administrator to bring it up.
When the HTTP server is up and running, on giving the URL
http://myserver.com:NNNN your browser will show the “OracleAS welcome”.
=============================================================================================
also had no positive effect.
I test in different browsers, different machines, the Jinitiator removed and installed again.
The versions I'm using are
EBS - R12.0.4
Java 1.6.0_15
Browsers - IE 8 e Mozzila Firefox 3.0
Can someone suggest something else.
Extremely grateful for any suggestion.

Hi,
What changes have been done recently?
Did AutoConfig complete successfully on all tiers?
If SSL has been enabled recently, please run SSL diagnostics tests and make sure all runs successfully -- Search "My Oracle Support" for "SSL Diagnostics R12".
Enable debug and see if you get more details about the error -- See (Note: 422419.1 - R12, 12.1.1 - How To Enable and Collect Debug for HTTP, OC4J and OPMN) and (Note: 438652.1 - R12: Forms Runtime Diagnostics (FRD), Tracing And Logging For Forms In Oracle Applications).
Regards,
Hussein

Schedule Line Item 100001 delivery date is missing

Hello Sirs,
After created a sales order in ECC and transferred to TM via XI, the queue remains with STOP status. Entering in transaction /SAPPO/PPO2 I’m facing the error “Schedule Line Item 100001 delivery date is missing”. The delivery date is filled in ECC side.
Is there something that I need to check in TM regarding delivery date?
Thanks.

Please try to edit the PO[Change date] and process it again. This issue happens when we use a conversion program to create PO instead of creating it from UI.

Need a function to calculate employee attendance data for a given period

need a function to calculate employee attendance data for a given period
as
Working days,
CL ,
SL,
PL,
LWP
regards,
Gaurav Sood.

Issue resolved

Have made a rebbot from Time Machine, and now I lack a lot of pictures. Can see icons, but not enlarge them. Especially pictures where 2009 is included in the date is missing? When I set up my desktop, I can find some of the pictures. Where do They hide,

Missing Pictures.
Have made a rebbot from Time Machine, and now I lack a lot of pictures. Can see icons, but not enlarge them. Especially pictures where 2009 is included in the date is missing?
When I set up my desktop, I can find some of the pictures. Where do They hide, and what shall I do.
Have made back up, but unfortunately a little too late. What to do?
MacBook Pro 15 "late 2008, Processor 2.53 Ghz Intel Core 2 Duo, Graphics NVIDIA GeForce 9400M 256 MB, Software Mac OS X 10.7.4 Lion (11E53).

1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now?

I downloaded apps purchased with another Apple ID. But my data is missing. What can I do to get them back? I have a different iCloud id.

I downloaded apps purchased with another Apple ID. But my data is missing. What can I do to get them back? I have a different iCloud id.

All apps are tied forever to the Apple ID used to obtain them, that is also true with In-App purchases.
Content bought using one Apple ID cannot be merged or transferred to another Apple ID.

ICal Date Headings Missing from Day and Week Views

Good morning,
A few days ago, the date headings disappeared from the Day and Week views in iCal. I can see the date heading in Month view, but when I switch back, the dates are missing. All of my events are there, and correct.
I have resolved font duplications and restarted iCal, to no avail.
Thanks for your help.
W

Still no date headings when my calendar is views in the Day and Week views. All of my appointments are there. The days of the month appear in Month view. But when I change to week or day, I don't know what day I'm looking at because there are no dates. Only "2010" appears in the upper left.
Any ideas? I couldn't be the only one this has happened to!
Thanks, Wendy

Hello Technical Experts... please help me on this error :- 'Tax data is missing ArrayOffset 12, srcLineNum 0, srcGroupNum -1'.

In my A/P credit memo screen i have incorporated a column for adding reference to closed A/P Invoices. upon filling this field with DocNum of APInvoice certain other fields also get filled from an SQL query. One among them is the TaxCode. My problem is that the TaxAmount(LC) field at the last row of the matrix is not filled with the appropriate value, it remains 0. On trying to add the document or pressing the link button on the TaxAmount field a status bar error message pops up showing, 'Tax data is missing ArrayOffset 12, srcLineNum 0, srcGroupNum -1'.
Please Help me solve this issue.
Thanks in Advance
Rajeev

Hi,
Please check SAP note:
1860926 - When updating a Purchase Order via DI API "-12109 Tax data
is missing..." Error occurs
Thanks & Regards,
Nagarajan

REQD for Fresh BAM Install 11.1.1.3.0 -Data labels missing issue

Hi
This information is relevant to anyone who is doing upgrading to 11.1.1.3.0.
There are 2 options if you encounter the data labels missing on the Active Studio tab :
(1) Switch to Jrockit
-Edit setDomainEnv.sh in directory $MW_HOME/user_projects/domains/base_domain/bin
-Set JAVA_VENDOR variable
JAVA_VENDOR=Oracle # For JRockit
JAVA_VENDOR=Sun # For Sun JVM
You'll see that JAVA_HOME should then point to "$MW_HOME/jrockit_160_17_R28.0.0-679"
**Jrockit version packaged with the 11.1.1.3.0 install***
-Start services
(2) For people who want to use Sun JDK, access support.oracle.com -- look for patch 9553040
This will provide an upgrade to JDK 1.6.0_20-b03.
Follow the instruction in the read me file . Refer to the following notes
- Upgrade the JDK within the Application Server $OH per the instructions in Note 272808.1
- Upgrade the JDK within the Database $OH per the instructions in Note 418399.1
Regards
Payal
Edited by: PayalS on May 17, 2010 11:07 AM

Hi,
I'm having the same problem than you.
I install the new JDK but now everything work besides BAM.
That happens with you after the upgrade?
The error is :
java.lang.RuntimeException: Invocation target exception.
     at oracle.bam.system.Delegate.dynamicInvoke(Delegate.java:196)
     at oracle.bam.system.threading.LoadObjectDelegate.invoke(LoadObjectDelegate.java:41)
     at oracle.bam.system.threading.SynchedHash.getObject(SynchedHash.java:104)
     at oracle.bam.web.shared.WebPage.userAuthCheck(WebPage.java:1371)
     at oracle.bam.web.shared.WebPage.processRequest(WebPage.java:347)
     at oracle.bam.web.shared.WebPage.processRequest(WebPage.java:316)
     at jsp_servlet._8533.__startpage._jspService(__startpage.java:71)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:416)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:326)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.bam.web.cache.ClientSideCache.doFilter(ClientSideCache.java:93)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.bam.web.filters.GZIPFilter.doFilter(GZIPFilter.java:97)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.bam.web.filters.ValidateBrowserSession.doFilter(ValidateBrowserSession.java:212)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.bam.web.redirect.Redirect.doFilter(Redirect.java:80)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.bam.web.filters.ValidateBrowserSupport.doFilter(ValidateBrowserSupport.java:133)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.bam.web.filters.CharsetFixupFilter.doFilter(CharsetFixupFilter.java:65)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at oracle.bam.system.Delegate$Sink.invoke(Delegate.java:80)
     at oracle.bam.system.Delegate.dynamicInvoke(Delegate.java:186)
     ... 44 more
Caused by: oracle.bam.common.remoting.ServiceUnavailableException: BAM-00223: Service interface oracle.bam.adc.common.core.IDataStore is unavailable.
     at oracle.bam.common.remoting.AgentBase.getServiceWrapper(AgentBase.java:190)
     at oracle.bam.adc.api.util.Context.(Context.java:187)
     at oracle.bam.adc.api.util.Context.(Context.java:161)
     at oracle.bam.web.shared.WebPage.createContext(WebPage.java:248)
     ... 50 more
Caused by: oracle.bam.adc.api.exceptions.ServerUnavailableException: BAM-01261: Cannot connect to the Oracle BAM Server.
     at oracle.bam.common.remoting.ConnectionPoolBase.getLocalService(ConnectionPoolBase.java:954)
     at oracle.bam.common.remoting.ConnectionPoolBase.createProxy(ConnectionPoolBase.java:855)
     at oracle.bam.common.remoting.ConnectionPoolBase.open(ConnectionPoolBase.java:588)
     at oracle.bam.common.remoting.ConnectionPoolBase.open(ConnectionPoolBase.java:77)
     at oracle.bam.common.remoting.AgentBase.getServiceWrapper(AgentBase.java:179)
     ... 53 more
Thank you
CD

Employee Discount: Data Discount MISSING

Similar Messages

Maybe you are looking for