Employee download in CRM5.0 miss personal number
Hi,
We recently upgraded CRM 4.0 to 5.0. We redownloaded all the employee records through the ALE process after following the upgrade instructions. The BPs successfully came over to CRM but missing the personal number in identification tab of BP under employee role. All the already existing employees after the redownload, get the personal number as 0. Prior to redownload it was fine.
Any help?
regards,
raja.
Message was edited by: Raja Raman
.
Similar Messages
-
Purchased the first four episodes of The Killing Season 2 and am so frustrated. Tried downloading on both my computer and iPad. Think they might be too big for iPad - says it's downloaded but can't open even though GB says there is enough. Am missing episode (Numb) on my computer and the ones that I have downloade to computer are not in sync with sound. Have downloaded newest version if iTunes. Please help.
Here's how to do it.
1. App Store, iTunes Store should have the same AppleID on Computer and iPhones. (Free to share apps, music and books... )
2. Person A uses the same purchasing account for everything (ie. email, contacts and ...).
3. Person B have the same purchase account see no. 1 (for App Store and iTunes Store) but create a second AppleID for iCal, e-mail, contacts and etc. -
Employee Download - HR* prefix in Number range
Our requirment when we download employee from ECC the prefix of Number range should be HR* we defined same number range with prefix HR----- and mark as Ext. but while download it takes only sales prospect number range.
What extra setting requir for getting HR* prefix number range.
Regards
ApoorvaHi Phani,
Thaks for reply,
From config side the numberrange and groupings are assigned and while download the std external grouping also assigned but how it takes prefix HR*
because from ECC it is carring only numerical numbers which is assigned to employee but while downloading it should take prefix HR* and rest would be employee number which is coming from ECC.we have defined the HR0000001 to HR9999999 as external but through idoc carring eg. 10036 so in CRM it should be as HR0010036. For getting this what extra config i have to do.or it requir some abap devlopment. -
Personal Number -Identification Tab- BP role BUP003 Employee
HI,
How can I get the personal number field of the Identification Tab in the BP role BU0003 Employee (Transaction BP). Is there a table or a FM to get it from the BP Guid or the BP id?
Thanks,
TPTHello,
If you need a relationship between the Pers ID number from entering the BP number, you can try using table HRP1001.
In this table enter the BP in the field SOBID, and you'll get the Pers ID in the field OBJID.
It also helps if you place field SCLAS with value "BP".
Hope it helps,
Regards,
Pedro -
Personal Number for employees
Dear All
Our clients would like to keep the employees old personal number along with the new personal number in SAP. For eg: Old number is 005 and new number should be 90005, where 90 has to be prefixed. This requirement is very urgent and I dont have a clue on this. Does this has something to do with referrence personal number.
Please give me an idea to solve this problem
Points will be awarded for correct answers.
Thanks and regards
Santhosh.SHi Santosh,
As per my understanding, it has nothing to do with Reference personnel number.Because one number is the old number which your client simply wants for the sake of reference.Whereas as per definition :
Reference Personnel Number
Employees with more than one work contract are assigned separate personnel numbers for each contract.
I am not too sure, but 0185 could be checked for retaining old numbers.
However as you want to give specific number to employees, you need to make it external number range.
Still I am sure, others might have a bring another good solution to it...
Regards,
Dev -
Requsition request Hiring manager personal number is missing:
Hi,
This is Regarding, requisition request:
When i am creating requisition request under MSS, through from asking the Hiring manager personal number. Could you please help me how we can get that.
Working with ECC6.0 with EhP-4.
Thank you advance.
Regards,Hi,
Thank you for yoru input.
Not found that entry any of the search profile type in that table. Could you please let me know under which search profile need to to add?
These are all the search profiles i can see under that table:"ERC_CDCY" "ERC_REQ" "EXT_POST" "INT_CAND" and INT_POER.
Regards. -
How to get the Personal Number from Address Number
Hi,
I have one requirement which is as follows.
I have one Customer. I am fetching Address Number(ADRNR) of this customer number from table KNA1.
I want to find the Personal number linked to this Address number and Customer.
Is there is any table or FM from where i will get the Personal number of the Customer using Customer number and Address number?
Kindly HelpHi Sachin,
Check this FM BUP_PARTNER_PERSNUMBER_GET
" Check KNB1 and the Field name is PERNR, Most of the times this is not maintianed.
" This refers to the Employees who are assigned as Customers
" In XD03 go to the Company Code Data there you can find this Value
" For more info contact your Functional Consultant
" This is to the Best of my knowledge
Also Check KNB1 but000 Tables
Cheerz
Ram -
Personal number field in asset master
Dear experts,
In Asset master-Time dependent tab we have option to put the personal number.
Kindly tell me where we have to configure this personal number in the system and we are not using the HR module in present implementation (this will get any table problem in for the creation personal number in asset master)
Regards,
VenkataswamyHi
Even if you are not using the HR module, you can still create Employee Master in the HR module and specify the Personnel No in the Asset master...
You might need to do some basic settings in HR to create Emp master....
Br, Ajay M -
From personnel number to person number
Hi,
I do have user name and personnel number of an employee. How can I get the person number of this employee as it is used in address data, for example table ADR6? What's the link between personnel number and person number/address number?
Regards,
RobertHi
personnel number and person ID number are two different Terms.
Personnel number is PERNR
When a new employee is hired, the system automatically creates the external person ID and stores it in the Person ID infotype (0709).
This is used majorly in the case of Concurrent employment
Ravee
+91.99206.33669 -
How to Pass personal number(pernr) to the ESS Webdynpro ABAP Application
Hi,
How to pass personal number of employee to the standard ESS webdynpro ABAP application as application parameter of iview.
Thanks
SrikanthHi
For WebDynpro application in iView there is a property to set Parameter for WebDynpro application.
Handel these passed parameters in Default plug of Interface Controller.
Note string passed as parameter in iview is case sensitive.
Try this code to get URl of Deployed application
String appURL = null;
try {
WDDeployableObjectPart currentAppPart =wdThis
.wdGetAPI()
.getComponent()
.getApplication()
.getDeployableObjectPart();
appURL = WDURLGenerator.getApplicationURL(currentAppPart);
} catch (final WDURLException ex) {
wdComponentAPI.getMessageManager().reportException(
new WDNonFatalException(ex),
false);
Mandeep Virk -
Hi,
Can anyone tell how to check which personal number(some number) assigned under which Manager.Hi,
In the "Org Assignmnet" info type of employee record there is an option to maintain Supervisor ID. You can check this option.
Regards
Sreekanth -
Dear All,
I would like to make the personal number field unchangeable by users.
I have maintained the parameter ID at SU3, than at CAC2 I have made the field
CATSFIELDS-PERNR displayed. With this I am able to load the data there automatically.
The problem is that the field is still changeable therefore all employees can record times
to each others employee number. So the aim is to allow record working times to their own
personal number.
Any Ideas?
Thank you in advance,
PéterHi Peter ,
You can make the CATSFIELDS-PERNR as display only .
In Include LCATSF20 , click on Enhance icon , then goto EDIT -> Enhancement Operations -> Show Implicit Enhancements options . You can find the Yellow line at the end of the Include (Before the ENDFORM) . You can create Enhancement Implementation here with below code in place :
Loop at screen .
if screen-name = 'CATSFIELDS-PERNR' .
screen-output = ON .
Modify screen .
endif .
endloop .
You can also try using SHD0 (creating Transaction variant) .
Hope , this is helpful to you .
Thanks and Regards,
Sucharita Das -
Can I reactivate a personal number ?
Hi,
can I reactivate a personal number ?
...because an unemployer came back to the company;
Best regards !!!!!Hi,
Please find the detail below.
1) Execute transaction PA40
2) In the personnel number field give the employee number
3) Then enter the date from when the employee would be active in the date field.
4) Then perform the Rehire action.
5) Update the infotypes which appears one by one.
Thanks & Regards,
Sandip -
When i try to do a software update, it finishes and then says that the update cannot be saved because it has probably been corrupted during the download. This has happened a number of times and i do not know why, any help?
asifmanzoor wrote:
i have 10.7.2, this download is 10.7.5
Are you Downloading it from here > http://support.apple.com/kb/dl1582
asifmanzoor wrote:
yes, i am using wifi
1) Turn your Wi-Fi router OFF... wait 30 seconds... Turn it back ON.
OR...
Do not use Wi-Fi and connect Directly to your Internet via ethernet cable. -
My iPod 4G, after a reset and iOS6 install, after I recopied and synced music, is missing most album art. Even songs directly downloaded from iTunes are missing album art. I'm using iTunes 11.0.1 on Windows Vista. My iPod isn't full. Whenever I go to "On This iPod" and add album art and sync, nothing happens. Please help :/
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
Maybe you are looking for
-
Is this okay? (Copyright Question)
With all the videos I see posted on YouTube with music from artists and bands, I was wondering if it is legal for me to use music I purchased on iTunes in videos I make on iMovie and then post them to YouTube. I really like the idea of being able to
-
hi icant sync my photos from itunes to iphone ..it shows copying 1 out of something but afterwards it stops and no photos in iphone ..i formatted several times ..and from my utunes i have sync my brothers iphone it synced prefectly only its problm of
-
HT5957 About iOS 7.0.2
Does this mean other people that don't know ur code can call people in your phone and go through your phone?
-
Early October 2011 MBP freezes at apple screen
After trying to update from 10.8.1 to 10.8.2, it tells me that it couldnt update to 10.8.2. Next boot, the system freezes at apple screen. I then try to go to disk recovery, and once in there it says Ive updated to 10.8.2. But in fact it did not let
-
Find size of table with XMLTYPE column STORE AS BINARY XML
Hi, I have a table with structure as: CREATE TABLE XML_TABLE_1 ID NUMBER NOT NULL, SOURCE VARCHAR2(255 CHAR) NOT NULL, XML_TEXT SYS.XMLTYPE, CREATION_DATE TIMESTAMP(6) NOT NULL XMLTYPE XML_TEXT STORE AS BINARY XML ( TABLESPACE Tablespace1_LOB DISABLE