Employee Ext no. against the vendor
Hi Experts,
I am fetchiung the vendor from lfa1.
My requirenment is to get the extension number of the employee who deals with the vendor that is stored against the vendor number.
I am not able to find any table for the above requirement, Pls suggest.
Thanks,
Vikas
Hi,
I have to created a BAPI which accepts the Vendor No. and Returns the Extention number of Employee who deal with that Vendor. This BAPI will be integrated with Webmethods.
Based on the Vendor No. I have, I need to find the Employee or Employees who deal with that vendor. Once, I'll get the employee. I need to get the extention no. of that employee and pass back that no . to the Webmethods.
I am not sure which table I have to use to get the Extention Number of the Employee.
Hope I am clear this time.
Thanks,
Vikas
Similar Messages
-
How to clear the down payment against the vendor invoice in the payment program?
A down payment is made $25 Later an invoice is posted for $100 Now i want to Pay $75 to Vendor But the Automatic payment program is not clearing the down payment against the vendor invoice. Could you please help how to clear the down payment against the vendor invoice in the payment program?
Swathi,
Need your help i have a strange situation
1) F-48 and document posted with document no = 15..... in company code = L002 with payment block getting populated automatically
2) F-48 and document posted with document no= 15..... in company code = Us11 without payment block and the screen does not even show payment block, I had to check this from BSEG table
My question is
a) How and where does this payment block is triggered through configured and how to process next steps.
b) when I use F-48, how do we do the actual payment, is there a check printing and linking it to the KZ document or is check printing done outside the system and the KZ document type does not have any linkage.
c) If I do FB60 for a higher amount how do we pay partial amount.
Your response is appreciated. -
Total number of RFQ's against the vendor
Hi Gurus;
Where can i find the total number of RFQ issued against each vendor. Please mention the table or any other source from which i can find this data.
Thanks.Did you try to find the table yourself?
its EKKO with BSTYP = 'A' -
Update the Vendor master from Employee master - PRAA
Hi
I need to know the process of updating multiple vendors from multiple employee data .i.e.bank,address and pernr.
I was using PRAA transaction but it was not updating ...i think i miss some entries..especially file path...
what are the steps need to be taken care of ...what should be in the file in the file path?
please let me know
ThanksThanks Rob
I checked the documentation..and found my error...actually the PRAA is updating vendor with employee data only when the employee number(PERNR) is updated in Vendor master...so i updated the field PERNR in Accounting section of Vendor then i ran the transaction PRAA it worked...it created the session and i processed the session..
My question is ..is the PERNR is mandatory in Vendor master record?
and How iam going to update the multiple vendor records with multilple Employee records? since the vendor for Reference is the single filed?
Please let me know
Thanks
Govi -
Does each employee will have an independent vendor account?
Hi Experts,
Happy New Year
We have posted our payroll results successfully. But there was one correction has to be done i.e we are recovering the festival advance from employees. The recovery has to be posted to respective vendor accounts. But in reality it is not happening. It is posting to one vendor account for all employees.
Firstly, I need clarification on - Does each employee will have an independent vendor account?
If yes, then why not the festival advances recovery are not psoting to the respective vendor accounts?
Waiting for your inputs...
Thanks
- SiddardhHi,
Normally we have to create the permanent employees as vendors and contract employees as materials as Anwar said it should be same as their personnel number, because while posting any advances like festival or any reimbursements (Bills submisssions) will be posted against the vendor or material number which is same as personnel number so the cost will be booked with the same number.
Regards,
Sridhar V -
Credit memo against a vendor invoice
Hi All,
I am trying to post a credit memo against a vendor invoice. After posting the credit memo I want the outstanding balance against the vendor to be reduced by amount of credit memo when I do F-44: vendor clearing.
So for eg: if the invoice amount is $100 & credit memo amount is $10, I want to see only $90 in F-44. How can I achieve this?
Right now I see Invoice amount $100 & credit memo amount $10 separately.
Thanks!Hi,
you have 3 ways to clear the Open line items(OLTs)
example:
1. follwoing document posted in FB01:
invoice : 40 expense 1000 USD/ 31 vend13 1000 USD
credit memo:21 vend13 100 USD/ 40 expense 100 USD
2. A :you could clear above 2 OLTs using "charge off differece" in F-44, enter posting key 31, vendor and
amount 900 USD. the result should be:
001 31 0001 VEND13 900-
002 27 0001 VEND13 900
B:residual clearing in F-44, you will receive the below result:
001 34 0001 VEND13 900-
002 27 0001 VEND13 900
But the re-requisition ifor above 2 solutions are the values in all fields which are includeded in structutre
KONTAB_1ST are the same.
C:partial payment in F-44, Below result:
001 27 0001 VEND13 100
002 37 0001 VEND13 100-
Then clearing the the left amount 900 in invoice, you should select the inovice and the partial clearing
document together.
Hope above infor. could help you to solve your query!
With Best Regards,
Gladys Xing -
How to payment the vendor against consignment PO
HELLO EXPERTS,
Can anybody help me how to PAYMENT my vendor against consignment PO. Because when i m doing a consignment PO,it is not taking any price ,than i go for GR and MIRO.
but in MIRO ,in PO purchase order reference when i give purchase order , it is coming that No (suitable) item found for purchase order
can any body tell me how to payment this vendor and how n where to give pricing value of that PO.
PLZ TELL ME ALL THE CUSTOMIZING IN DETAILS.
regards.Hi
A warehouse can contain stocks owned by variousconsignment vendors. Settlement is based on the
material withdrawn from the consignment stock.As a result, Inventory Management and Invoice
Verification must fulfill special requirements.To support the procurement process for consignment
material, you can define conditions for consignment processing that are valid for specific periods. You
can enter these conditions in foreign currencies and include alternative units of mea-sure. For inventory
postings (for example, postings made for deliveries, good issues, confirmations for run schedule headers) and in the relevant preparatory phases, the system can suggest the stocks from which to withdraw material. In the strategies used for stock selection, you can have the system take both your
companys own stock as well as the vendor consi gnment stock into consideration.The R/3 System provides enhanced functionality for settling consignment liabilities. To make the process more transparent to the vendor, you can create consignment settlement documents and send them
to the vendor.
refer to link www.scribd.com/doc/2229268/MM-2-009-Consignment -
http://help.sap.com/saphelp_erp60_sp/helpdata/en/33/222138c2ebcc46e10000009b38f842/frameset.htm -
The vendor code is not coming against some Assignment line items with the
Hi All,
While executing t.code FBL3N,the vendor code is not coming against some Assignment line items with the GL A/C4607000, some line items it is coming.
The GL A/c 4607000 is GR/IR clearing a/c.
Please let us know why this situation is happeing at the time of FBL3N.
Thanks
RamHI,
By activating the special fields you can the vendor number, but use the new reprot called "FAGLL03 - Display/Change Items (New) ".
First go to SPRO> Financial Accounting (New)> General Ledger Accounting (New)--> Master Data > G/L Accounts>Line Items --> Define Special Fields for Line Item Display
Click on New Entries -
Table - BSEG - Field - LIFNR
Save. Now execute the report - FAGLL03 - Display/Change Items (New)
Give the gl account number and execute.
After getting the line items list from menu select --Settings --> Special Fields --> Click on New Entries --> Enter Table BSEG, Field Name LIFNR.
After this come back and execute again. It will give you the vendor number.
Thanks & Regards,
Shashi Kanth. -
Payments made to vendor against the PO should appear in PO
Hi
Thanks for the reply
is there is any possibliy so that i can see the vendor down payment and the other progreesive payments made to vendor. Also i want to link the payments made to vendor i.e what all payments is made to vendor aganist the PO should appear in PO in the same fashion as downpayment appears.
regardsThanksfor reply
But if i am not doing the progressive payment thru downpayments but thru other trancation then how this will be shown.Another point of concern is that if i am doing the payments F-53 then will i can get the downpayment history from for a particular PO .This is required as finanace guy wants to know how much advance and progressive payment i have made to my vendor against particular PO .
Need your help and suggestion
regards -
Against which vendor the excise invoice passed by dealer
Scenario:Vendor A is supplying me the raw material which he has purchased from vendor B ,So the excise invoice Vendor A has paid to Vinst vendor B as he cannot avail the cenvat on them so he passes it to me.
Now my question is Excise invoice given by vendor A has been issued by Vendor B so when i record this excise invoice in my register ..so should it be recorded against ivendor A or Vendor B.
If vendor B should be against whom my excise register should have entry than ..how to do the same?Dear Prabhjot,
Thnaks for your reply ..I understand that if VEndor B excise invoice has been passed by vendor A than Excise register needs to be updated with Vendor B.
But in 1IEXwhile u capture and post excise invoice system will show the vendor A but in miscellaneous tab u have field call ship-from
in this ship-from we put vendor code as B manually looking at vendor invoice
this is only way to capture vendor provinding excise invoice other than po vendor as i belive but in excise register i still get the vendor A as excise invoice provider.
Kindly let me know how to get vendor B in my excise register.
Regards
Amit -
Where is the vendor description(short text) stored against LIFNR
Hello,
where is the vendor description(short text) stored against LIFNR ..
Thanks..
ShehryarHi,
Venodor Name is in the Table LFA1 and field is LFA1-NAME1.
if it is Blank you can take the ADRNR from LFA1 and go to ADRC table with ADRNR and get the Name from ADRC table.
Regards
vijay -
What are the Oracle Grid's differences or strengths against other vendors
Hi,
I'd like to know what Oracle 10g system is different from others.
There are many concepts for Grid computing,
but isn't still standardized form for it.
So many vendors are imprementing their own Grid system.
Can anyone point out about what are the Oracle Grid's differences or strengths against other vendors (IBM, Microsoft, Sun etc)
Thank you.Hi
I'm very skeptical about what Oracle calls grid computing. Few years ago I wrote a paper entitled "Is Oracle Database Moving Toward Grid Computing?" (http://www.trivadis.com/Images/grid_computing_en_tcm17-11759.pdf) handling that topic. Honestly, even two releases later (10.2 and 11.1) things has not really changed.
HTH
Chris -
Element entry against the employee and company
How do u check element entry against the employee and company? Don't we have to use Benefits tables. And what tables are we supposed to use.
Many ThanksI got my phone in october, faxed in paystub at the same time. The store told me 1-2 billing cycles. When the first bill came it wasnt on there, I went into another verizon store and they told me its faster to bring them the paystub so they can take a picture of it and "instantly" get it in the system. Then the next bill came and it still hadn't been fixed so we called and then they gave us some "ticket number" and told me it should be on the next bill. This months bill is here and and its STILL not there. This is ridiculous. customer service is TERRIBLE! There is only one number for customer support and they are helpless.
-
Processing Leavers for Employee expenses and blocking their vendor records
Help please:
Is there a set way of stopping Employee expense records in FI when an employee leaves, and putting a payment block on his/her vendor record?
There is no employee status, therefore can the end dates be updated? If so, will this automatically block the vendor record from payments?
I believe that relevant programs are:
RPRAPA00 to load updates against the employee expense record;
RFBIKR00 / RSBDCBTC_SUB to update the vendor record.
Edited by: Andrew Staples on Feb 20, 2008 6:33 PMHello Cindy,
Yes, from FBZP it is only possible to do that if it is a House Bank.
Well, I imagine you will have to implement an ABAP user-exit in both processes (Selling, example transaction VF01 and Buying, example transaction MIRO) to check Customer and Vendor bank master data to avoid using the bank you don't want to.
The Customer Bank table is KNBK.
The Vendor Bank table is LFBK.
So, if you have a single bank, it is just a matter of comparing the related record from one of the tables with the bank key.
If there are more than one bank key to check, I suggest you to build a Z table with the "prohibited" bank keys.
Hope it helps you.
Regards,
Daniel. -
Linkage of employee field P0000-STAT2 in vendor master
Hello,
I want to know linkage of employment status field to vendor master in case employee is linked to vendor.
Field of employment status in HR master record is P0000-STAT2.
We have vendor master against each HR master record.
In case employee is seperated and employment status is 0 (Inactive), how would it reflect in vendor master ?
Is their any field in vendor master record which reflects this ?
Employement status is under infotype : 0000 (Action).
In case there is no linkage of this field and infotype to vendor master, what is the possible way to link it ?
Any help is highly appreciated.
Thanks in advance.
VaibhavHi Vaibhav
The response here will vary on what is your need.
You need the employee status to be visible on the vendor master, definitely there is no predefined field for this.
However, if you need this for only reporting purpose, you must follow a simple method of queries. As your ABAPer to form a report with just one select statement as below
Select LFB1-LIFNR, LFB1-PERNR, PA0000-stat2 from tables PA0000, LFB1
where PA0000-PERNR=LFB1-PERNR
This will simply give you status of all vendor employee status
However, you need this for some automatic program, you must add extra column to the table LFB1 and make sure that there is a extra lines of code for autoupdate the table when you create or modify the vendor master table using XK01 or XK02. This step is very important as without this, the z-column is of no use
Regards
Vivek Singh.
Maybe you are looking for
-
Auto-scoll (middle mouse button) gone in Firefox 20/Windows 7 64-bit
I recently upgraded both my work PC and my home PC to Firefox 20.0.1. My work PC (Win XP 32-bit) works fine, but my home PC (Win 7 64-bit) no longer allows me to auto-scroll when I click the middle mouse button (it does nothing). I have tried restart
-
Does anyone know why I am getting a yellow question mark by my AS3 .swf?
I developed a few Actionscript 3 animations in CS Flash 5 to use in Cp5. Instead of the green ball icon in the upper right corner of the animation, I am getting a yellow question mark like I did when with my Actionscript 2 .swfs. The reason I creat
-
Logout link is missing in OBIEE 11g
HI, After enabling SSO using CA Siteminder i am able to login to OBIEE11g using sso enabled url, but after logging in i dont see the logoff button at the top of OBIEE. From the EM under security i have enabled sso and added logon url and logoff url a
-
First of all, X=FI rules! The sound quality and placement on my 24 bit 5. speakers is unbelievable. Now, on to the problem. I usually keep the mode set to Game, so I can take advantage of the EAX 5.0 effects in all my favorite new games. However, whe
-
How to refresh an iterator with PPR set to none after task flow operation?
Using JDev 11.1.2.1.0. Doing the sample here: http://www.gebs.ro/blog/oracle/oracle-adf-creating-an-addedit-bounded-task-flow-using-a-new-transaction/ For this to work, you've got to set your page iterator/executable's ChangeEventPolicy to "none". Ot