Employee external or internal?

hi guys,
i hv got a query..i am new to abap hr...how can i find out whther an employee is external or internal?
this is related to joining correspondence which is sent to an attendee whenevr he is booked onto a course..so i need to specify the fee as ikost or ekost based on whether attendee is internal or external..
response will be appreciated
thanks

Hi Mohit,
Goto PP01 transaction and select H as the object type and select the Object ID of the external person for whom you want to take all the details.
Select the Relationship from the Infotype screen and you can get all the information .
Regards
Vijay

Similar Messages

How to authenticate external and internal users on different AD

What is the recommended way to authenticate external users as well as internal employees in a customer facing application?
We have external users in an Active Directory in the DMZ and our employees in our internal DMZ. Unfortunately we don't have an identity management system in place and wondering if there is a way we could authenticate user against two active directories without creating a trust between them.
We are implementing EP7.0
Thanks in Advance.

You can also use user partitioning. A feature of the UME which allows for having different user persistence options for different users. What you could do in this case have the external user stored in the local db or an LDAP for the external users and the internal users stored in an internal LDAP directory. For more details about <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/e0/b60b404b2b1e07e10000000a1550b0/frameset.htm">user partitioning</a>, please see the docs.
regards,
Patrick

External and internal mikes are not automatically switching over either recording or on voice calls

My laptop model name is HP Pavilion dv4-1100ea which is shipped with Vista Home premium 32 bits and has got service pack 1.
Restored the laptop to factory setting since then I am having the following problems; I had the same problem when my laptop was brand new and whenever I reset the laptop to factory setting I get the following problems:
1. External and internal mikes are not automatically switching over either in middle of the recording using sound recorder or while the call in progress on voice calls (skype):
   Using the sound recorder if I start recording the sound with external mike and in-between recording if I switchover from external mike to inbuilt mike and later on when I play back I can only hear the sound up till where I used the external mike during recording, after the switchover to inbuilt mike I cant hear any sound.
   But if I start the recording with inbuilt mike and in between recording if I plug in the external mike and later on when I play back I can only hear the sound up till where I used the inbuilt mike during recording , after the switchover to external mike I cant hear any sound.
   So in brief both my external and internal mikes are working fine, only problem is that if I start recording (using sound recorder) or voice call with one specific mike, I have to continue with it till the end. I can’t switchover to another mike in between the conversation (voice call) or recording, if I do so, I have to select the mike manually in chat software but while recording I cant even select manually because in laptop, it takes the mike whichever is in current use as default mike in recording tab(sound window). The green tick automatically (in recording device tab) switches over according to the use of mike. Though the green tick in the recording tab is switching over automatically according to use of mikes, its not picking up the sound after switch over during recording.
2. And also when I click on recording device tab in sound window and plug in external mike, though the green tick automatically switchovers from internal to external mike, while I speak both internal and external mikes volume meter respond to the sound inputs by rising and falling but if I take out external mike, green tick goes to internal mike and when I speak only internal mike volume meter respond to sound rising up and down not the external mike.
To resolve the issue I have tried following steps with no luck:
1.I have checked the mikes(internal and external) properties, the both mike shows to be enabled in general tab, in level tab the volume is set to 100 and in advanced tab , all options are selected.
2. In device manager I have got only one audio driver named as “IDT High definition Audio CODEC”. I have uninstalled the audio driver and reinstalled it using scan for hardware option
3. Uninstalled the audio driver in device manager and reinstalled the audio driver using recovery manager > advanced option> hardware driver re-installation.
3. I have updated the BIOS(Insyde F.65, 12/02/2010).
4. I tried to update the audio driver using below link but things went more worse so I did system restore (not factory setting though).
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-67051-1&lc=en&dlc=en&cc=us&...

Sounds like you need to upgrade to the iPhone 5s
The 5s has Touch ID
You can unlock your phone with your finger instead of typing in a key code
No swiping to unlock either, just touch the home button
You can enrol multiple fingers as well
Here is a video of it in action
http://www.apple.com/iphone-5s/videos/#video-touch
Or wait and see what iPhone 6 has to offer
That being said, as desiel vdub posted if the phone is up to your face, the proximity sensor should turn the screen off
And when you lower the phone turn it back on again
Not sure about the phone locking when your on a call doesn't sound right

What's the easiest way to add storage to a mac mini. (1TB hard drive but only 32G of real storage). External device, internal or partitioning?

What's the easiest way to add storage to a mac mini. (1TB hard drive but only 32G of real storage). External device, internal or is there some way to partition? I tried doing so but received a message that there wasn't enough free space to partition. Seems like a 1TB drive should have more storage than my Ipad

Its worth confirming what free space you have on your drive:
go to: Apple Menu > About this Mac > More Info > Storage
The bar chart shows how much free space there is on the drive:
Please realise that partitioning does not create extra space so this wont help you.
If your free space is less than 20 % you should get extra storage with an external USB or Firewire drive, any make or model will work.

What are policy firewall port should be permit between meetingplace web external and internal

I deploy MeetingPlace Web Conferencing with SMA.
1. What are policy firewall port should be permit between meetingplace web external and internal (web external on DMZ zone and web internal on internal zone)?
2. Synchronized Globally Unique Identifiers (GUIDs) between internal and external Web Servers used firewall port?

Hi,
List of Firewall pots to be opened are mentioned in following document, you can refer your deployment type and open ports as mentioned.
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.5_--_System_Requirements_for_Audio-Only_Deployments
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.5_--_System_Requirements_for_WebEx-Scheduling_Deployments
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.5_--_System_Requirements_for_MeetingPlace-Scheduling_Deployments
Regards
Ronak patel

Prob creating ABAP Proxy-Interface use external and interna msg definition

Hi,
I've created a service interface using external definition (message type for request and response), imported via WSDL file. However, while creating ABAP proxy in SPROXY, it gave the error message "Interface uses external and internal message definition". I searched through the forum, the questions were raised but no definite answer was found. Is it not possible to generate a proxy if there is any external definition used?
Details of the error message:
Message no. SPRX122
Diagnosis
In a message interface you can use messages from different sources:
Message types and fault message types edited in the Enterprise Services Repository
Messages imported into the Enterprise Services Repository (external definitions, RFC, IDoc)
In the current message interface, message types from different sources have been used. Since messages from these different sources must be handled differently during proxy generation, such a mixture of messages within a message interface is not possible.
System Response
The interface cannot be generated.
Procedure
Change the interface definition accordingly in the Enterprise Services Repository.
p/s: My external definition is actually derived from a ABAP FM web service. The reason why i used external definition is that i try to avoid the tedious steps of hard-coding all the data types for the request and response message types.
Any help would be highly appreciated.
- julius

Hi Arvind,
For technical reasons, proxy generation and the respective editors in the Integration Builder do not support the entire language range of XML schema and WSDL. For an overview of which language elements are supported, see the Excel spreadsheet in the SAP Service Marketplace at service.sap.com/xi ® Media Library ® Documentation: SAP XI 3.0 (SP11) u2013 Supported XML Schema and WSDL (EN).
I couldnt find the above document in the service market place. Any hint to find it?
Thanks.
- julius

HT3986 can bootcamp be used with Windows install disk on an external drive (internal is broken) ?

can bootcamp be used with Windows install disk on an external drive (internal is broken) ?

With Boot Camp, you must install Windows onto in internal HDD (or SSD). If you are referring that your internal Optical drive is broken, you might be able to install Windows from an external drive, but you might not. I have heard varying levels of success with that. I'm not sure what the official stance is, but I do know that if youe machine shipped with an internal optical drive, then you must use that to install Windows using Boot Camp and not swap it out for a "data doubler" and try to install from an external optical drive.

NAT external to internal

i am having trouble with NAT. it is my first try at this and need some help, please. I have a 2610 with 2 Fastethernet connections. fa1/0 is internal 10.10.10.1/24
fa0/0 is external 66.73.xx.xx/26
i can succsefully go internal out to external with the ip nat inside source list 1 int fa0/0 overload command.
what is the command to allow external to internal. thanks

I think these should help depending on your exact scenario.
Static NAT
ip nat inside source {static {esp local-ip interface type number | local-ip global-ip}} [extendable | mapping-id map-id | no-alias | no-payload | redundancy group-name | route-map | vrf name]
no ip nat inside source {static {esp local-ip interface type number | local-ip global-ip}} [extendable | mapping-id map-id | no-alias | no-payload | redundancy group-name | route-map | vrf name]
Port Static NAT
ip nat inside source {static {tcp | udp {local-ip local-port global-ip global-port | interface global-port}} [extendable | mapping-id map-id | no-alias | no-payload | redundancy group-name | route-map | vrf name]
no ip nat inside source {static {tcp | udp {local-ip local-port global-ip global-port | interface global-port}} [extendable | mapping-id map-id | no-alias | no-payload | redundancy group-name | route-map | vrf name]
Here is the link to the doc for NAT for more details on NAT
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hiad_r/adr_i2h.htm#wp1178184

DVD/CD unit external or internal?

External or Internal which do you recomend?
Is this the best internal?
Apple/Pioneer DVR-109 (reports as a DVR-127D - see note below) DVD Recordable Drive
16X DVD-R/+R, 6X DVD+R DL* Writer
Thank you

>Here in Mexico we look the 3 "Bs" -buena, bonita y barata.
good, nice and cheap.
Here we have a saying, too:
"Good, nice, cheap. Pick any two - all three is not an option."
Is it true if I clean the lens the problem -stopped recognizing DVDs and CDs- is fixed.
I don't know the problem you're having with the existing drive to know whether cleaning it would fix the problem, but it's a good thing to try.

TNS Listener Poison Attack...externally or internally ?

Hello all,
with regrads to the below thread which mostly talks about Oracle Security Alert for CVE-2012-1675 "TNS Listener Poison Attack"....i just wanted to find out if this effect DB that are externally or internally....meaning 95% of our DB are in network(internally) behind our firewall....and rest of the 5% are outside our firewall facing the world wide web....so does this apply to both of just one ?
Oracle TNS Poison vulnerability

user097815 wrote:
with regrads to the below thread which mostly talks about Oracle Security Alert for CVE-2012-1675 "TNS Listener Poison Attack"....i just wanted to find out if this effect DB that are externally or internally....meaning 95% of our DB are in network(internally) behind our firewall....and rest of the 5% are outside our firewall facing the world wide web....so does this apply to both of just one ?The attack is on the Listener itself - so if you want to prevent this attack, you need to secure that Listener, irrespective of its location.
IMO, mandatory if you expose your Listener to an unsecured or public network (e.g. internet).
As for Listeners running on your internal network - if this attack is used, securing your Listeners mean very little IMO. Because your internal network already needs to be compromised in order for the attack to occur. Which means you have far more serious problems then someone attacking your Listeners.

Access to application when external and internal address of EP are differen

I have a problem with access to application in portal. I deployed the application (ear) and it is available by address http://noss.inside.bcc.com.pl:54100/forum/index.jsp in our intranet. External address of portal is https://portal.bcc.com.pl. My application is unavailable outside the company, because in url iView there is an address of internal network. I've tried to use relative address /forum/index.jsp, but it doesn't work. Is there any kind of iView, which can solve my problem?

Hi Julia,
have a look at this Topic: <a href="https://forums.sdn.sap.com/thread.jspa?threadID=65920">How does portal connect a user to internal web site</a>. Basically it is the same problem. Unfortunately Jeremy had not described the solution in detail.
Regards
Gregor

DNS Setup/View external website internally

Greetings all - trying to set up a Mac server from scratch for the first time. Been managing one for a while but didn't actually set it up myself.
I have the beginnings of DNS setup all squared away, but am still looking to figure out how to properly set up my website. Here's my setup. We used to have a joint Windows 2003/10.5 server environment. Windows handled Exchange and DNS, the Leopard box handled everything else (DHCP, web, file sharing, etc). We're transitioning everything to the Mac box in preparation for setting up Kerio MailServer and just to ditch the windows box.
I own companyname.net - that domain is hosted externally by Network Solutions. It's forwarded to my static IP.
Our old internal DNS was hosted by a Windows 2003 box - it had zones for companyname.ltd (the private internal domain) and companyname.net. companyname.ltd was the nameserver. There were two A records handling the website for internal clients - one with a blank name, and one with www. Both pointed to the IP of the Mac server (the current box that I'm transitioning everything to). Everything was hunky dory - internal pings to the web address went to the internal ip, externally it went to the external IP, and everything worked just great.
So in setting up the new DNS on the Leopard box, here's what I have so far.
Primary zone: companyname.net
A Record: macpro : 192.168.1.3 (this is the name of the server)
A Record: mail : 192.168.1.2 (our mail server)
Alias : ichat : macpro.winstongroup.net
The checkhostname thing works fine, Kerberos is up and running, as is Open Directory.
Now, I do not know how to set up our website so that internal clients can view the external website. I tried creating an A record to the server for www, but then that overrides the macpro A record that is the host of the whole thing. I also tried creating A records to the external IP, but then when I pinged it just pinged once, then it seemed like the firewall kicked in and stopped it. I tried creating aliases to companyname.net but every time I did that, Server Admin kept adding on an additional companyname.net to the end of the name (so it would read like companyname.netcompanyname.net). That didn't make much sense to me.
I'm sure there's other people who can view internally hosted sites from the lan - so any help would be very much appreciated!

One minor other question. I prefer the url of our site to be companyname.net instead of www.companyname.net. So now, while www is set up as a server alias, it wouldn't direct to companyname.net, even though that URL was set up in the web services panel in Server Admin. I then created a new alias that was "companyname.net", without the trailing period so it was not a FQDM, directed it at the same web server, and everything seemed to work. Does that seem right - it's working, so it seems to be somewhat right at least!

DNS - external DNS internal - Domainname?

Hello, I have the following problem:
Private IP network (192.168.0.0) behind router, which has a fixed external IP and an ADSL connection.
The Leo server on the internal network has a fixed IP: 192.168.0.20.
The Domain Name "firma.com" is hosted on a external provider, there is also a external web server running, which can be and should be accessible under "firma.com" and "www.firma.com".
I have set up a subdomain in the external provider’s DNS, "intranet.firma.com". This is resolving to the external IP of my router. The router is configured that it routes all requests from the external IP to the internal address "192.168.0.20".
The Mailxchange (MX) record also redirects on "intranet.firma.com."
And now the DNS server on the Leo-server? Which are the correct entries?
IP address: 192.168.0.20
subnet mask: 255.255.255.0
router : 192.168.0.1
Primary DNS: 192.168.0.20
DNS Secondary: I 192.168.0.1
Which has to be primary zone name: "firma.com" or "intranet.firma.com"? I mean, can there be "firma.com", when there is a external webserver which needs that name?
When I use "firma.com" for the Leo DNS and the server’s name is "intranet ", the it resolves to the internal server very well. But how can I get my externally hosted web "firma.com" or "www.firma.com", if I DNS server "firma.com" as the primary zone there? Which is the right configuration that I can send mails internal, external and from external? And use the external webserver as is?
Thank you
Willi

First using a 192.168.0.0/24 or 192.168.1.0/24 network on your LAN is a bad thing if you are going to use VPN later.
"I have set up a subdomain in the external provider’s DNS, "intranet.firma.com". This is resolving to the external IP of my router. The router is configured that it routes all requests from the external IP to the internal address "192.168.0.20". "
You can use this if you want but you probably don't want the mail to require a an address like:
<user/mailaccount-name>@intranet.firma.com do you? The MX pointer can use firma.com with an address of intranet.firma.com:
firma.com MX 10 intranet.firma.com
You could also look at intranet(.firma.com) as a hostname instead of a subdomain.
(Maybe you should use an other domainname internally: firma.private or firma.internal)
If you want to use the same domainname (firma.com) internally setup "all" the public names/IPs in the internal DNS and use only the server (private IP) DNS (with forwarders to your ISP DNS IPs) not the router DNS proxy for all internal machines.
If you want to run an intranet webserver why not call it intranet.firma.com and the public one keeps it's name www.firma.com.

Configure a sharepoint 2013 site for external and internal access

I need to configure a local install of sharepoint 2013 so that users can access it internally and externally using windows/AD authentication. The internal and external addresses are different.
I have bound an external ip to the domain for external access.
I have created Alternate Access mapping, and bound the host header but I get a file not found message for external access.
Have I missed something here? why the error and how can it be fixed. Step by step process would be appreciated.

Hi Luis,
According to your description, my understanding is that the error occurred when accessing the site externally.
The most common cause for this is that the IIS host header is configured incorrectly. The 404 will appear because we are hitting a different IIS web site and not the one we are intended to.
Here is a similar issue for you to take a look:
http://stackoverflow.com/questions/14953322/sharepoint-2013-404-not-found-while-accessing-site-collection-from-outside
More references:
http://technet.microsoft.com/en-us/library/cc261814(v=office.15).aspx
http://technet.microsoft.com/en-us/library/cc263208(v=office.15).aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Moving a folder from external to internal hard disk

I want to move a music folder on my external hard drive to the internal one. I had previously disabled the option of copying files to iTunes library so this folder is not a part of iTunes Music folder Music/iTunes/iTunes Music but is is added to the library. If this would have been a folder on internal one then seems like itunes synchronizes it if I move the folder at some other location but here in this case if I move the files then there is no synchronization and itunes asks me to locate it. I don't seem to find any solution online. Please help

What I'd do is make a parent folder on the external for all of your images inside of LR. Then copy all the images, including the parent to the new location. Copy the catalog to its new location too. Then open the copied catalog, at which time all your folders will be red. Then locate just the parent folder within LR and all the rest will be found. Then delete the parent and promote the rest.

Employee external or internal?

Similar Messages

Maybe you are looking for