Employee group have been wrongly assigned during Hiring in PA40

Dear Guru,
I have one scenario where an employee; employee group have been wrongly assigned during Hiring PA40. The user has entered and assigned the employee group as Contract - Local instead of Contract - Foreigner in the Employee group field.
Please advice how to change and rectify this incident.
Thanks & Regards,
Wai Cheng - Yokota

Dear Guru,
Many thanks for all your advice.
I have use PA41 Transaction code to make the correction. However, I noted that the wrongly assigned Employee group remains unchanged in PA30 HR Master data.
Hence, I decided to use PA40 Hiring Action to make the correction by selecting Position/Band Change field. After save the correction in Copy Actions screen, it will lead you to Copy Organizational Assignment and save your entries. There will be a message appear at the bottom in regards to the position. Just click next arrow icon and click yes.
Go to PA30 HR Master data again, to verify that the correction and noted that it has change.
Regards,
Wai Cheng - Yokota

Similar Messages

  • No Groups have been registered for the Advance Test

    Hi,
    When I run the Diagnostic Tool and select Application, then it say "No Groups have been registered for the Advance Test". Though it shows number of test available for that application for ex. 4, 15. Please help me.
    Regards,

    One more note which should be helpful:
    Note: 235307.1 - eBusiness Support Diagnostics FAQ and Troubleshooting Guide
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=235307.1

  • Diagnostics Test: No Groups have been registered for the Advance Test

    Hi
    recently I had refershed my Devlopement from production. When i used to launch the diagnostics tools. No goups were found for all modules.
    It worked before.
    No groups were found and messege given below was appeared.
    <strong>No Groups have been registered for the Advance Test
    </strong>
    Could you help me out on this issue.
    Do i need to set any parameters like wrapper.classpath in jserv.properties.
    Thanks in Advance.
    Tokala
    Edited by: neosatish on Oct 29, 2008 9:53 AM
    Edited by: neosatish on Oct 29, 2008 10:47 AM

    Please refer to the following notes:
    Note: 402987.1 - Oracle Diagnostics: No Groups have been registered for the Advance Test
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=402987.1
    Note: 235307.1 - E-Business Suite Diagnostic Tools FAQ and Troubleshooting Guide for Release 11i and R12
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=235307.1

  • Owner and group have been switched to unknown.

    I have a server 10.4.9 running on an Intel XServe.
    Lately some of the folders have been changed from the correct owner and group "staff" to owner and group "unknown".
    Strangely enough when a user logs on to the server from a client machines and views the permissions on the folders they are all owned by the name that logged in and to group staff. Other folders are simply shown with the permissions they were created under.
    Is this normal?
    Is "unknown" some kind of feature to allow users to see files and folder as if they were owned by the users login name.
    Could someone please explain this to me or point me to some reading material regarding this. If it is found in the manuals please tell me the approximate location.
    TIA
    Hans

    If I were to guess, I'd say someone turned on "Ignore ownership on this volume". Select the volume in question and Get Info, then see the check box at the very bottom of the properties window.

  • TRYING TO SET UP I PAD TO HP AIR PRINTER HAD PROBLEMS WITH ,TALKTALK ROUTER, ASKED AT PC WORLD ADVISED TO BY AIRPORT EXPRESS BUT STILL NO LUCK WILL NOT COMPLETE SET UP. THOUGHT THIS WOULD REPLACE THE ROUTER, I THINK I MAY HAVE BEEN WRONGLY ADVISED

    Having problems with air printer to i pad, problem seems to lie with talktalk router, hp solutions managed to get i mac to air printer working but not i pad, adivsed to buy another router as talktalk is not compatiable with bonjour. Went to PC world apple department advised to by airport express. tried setting it up using but will not finalise. i was led to believe this would replace the talktalk router? i feel i have been sold the wrong thing. Any suggestions

    This happened to me when I was setting up the wireless router for a friend.  The issue is with the Westall modem.  You need to go in and setup the "bridge" option on the westell modem.  The link below gives directions or you can call bellsouth dsl support (this is how I learned about it).
    http://help.bellsouth.net/bellsouth/asp/contentview.asp?isbrowse=true&sprt_cid=3f993409%2Ddff7%2D422...
    Good luck
    Solution:
    Method 1 - Hard Reset
    Restore the modem to default settings by pressing the Reset button on the back of the modem and holding it for 3 seconds. (Bridged mode is the default setting for the Westell).
    After the modem regains sync, it is in Bridged mode. Do not attempt to surf into the modem as surfing into the modem will enable the Easy Login page and convert the modem from bridged mode to a PPP mode.
    Method 2 – Bridged Mode
    Access the Westell interface using http://192.168.1.254 or http://launchmodem.
    Click on the Broadband DSL Line button. 
    Click on the Protocols button 
    Select the radio button to the left of Option 2 (Bridge)
    Click the save button. Once the modem has restarted it is in bridge mode. 
    ALL STEPS COMPLETE

  • IM Storage location has been wrongly assigned to a WH

    Hello MM Sapperu2019s,
    I have wrongly assigned one storage location which is relevant for IM to a WH.Now I need to deactivate the assignment which I have made in the below SPRO path,
    SPRO-->Enterprise Structure >Assignment>Logistics Execution-->Assign warehouse number to plant/storage location
    Please let me know what all the prerequestie / activity I need to take before I deactivate the assignment in the above path.
    Awaiting for Your valuable replies.
    Br
    Kumar.S

    Hello again,
    Thnks for your valauble replies.I have checked the below tables in Prodution system and observed that there are no documents observed,
    1.Checked any TRs available or not (LTBP Transfer requirement - item) - 0 (No Documents available)
    2.Checked any TOs available or not (LTAP Transfer order - item ) - 0 (No documents availalbe)
    3.Checked any Qunats available or not (LQUA Quants) - 0 (No documents availlable)
    4.Checked any inventory data per quant available or not (LINV Inventory data per quant ) - 0 (No documents available)
    So let me know the table details for PCN also.I can cross verify once in my production system.
    Also please let me based on the above observation can i go head and deassign or deactivate the st location  for the WH or not.
    Please guide me with your valuable inputs.
    Br
    Kumar.S

  • Exchange Outlook 2013 freezes when deleting shared calendar for employees who have been removed

    Hi,
    I am removing users' shared calendars from my outlook 2013 in exchange environment. The problem is, that the shared calendars belong to users who have left the company and have been removed from the domain, this is causing outlook to freeze because i think
    it's trying to find the entry then delete it, rather than delete it.
    There is no problem deleting a shared calendar for an user who still is in the domain. This seems to be strictly affecting users who have left the domain.

    Hi,
    Generally, if the shared calendar owner is removed from the Exchange environment, the shared calendar which was added before should be removed from Outlook client normally.
    Please use Outlook with Exchange cached mode, and make sure the shared calendar was not added in Advanced tab in Account Settings. Please start Outlook in safe mode and remove the shared calendar to have a try.
    If the issue doesn’t happen in safe mode, please disable the third-party add-ins one by one to find out the cause.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Holder-Position relationship not created during hiring in PA40

    Hi,
    I have an issue right now where the holder-position relationship was not created when I hired a new employee thru PA40. We could correct this via RHINTE00. However, we would like to know first before we run the program on what could be the probable cause why the relationship was not created. All infotype records of the employee were added successfully in the system, it is only the SP relationship in HRP1001 that was not created during hiring. I'm  still trying to replicate it to find the probable cause but still no luck. It only occurred once (quite rare). Since we can't replicate it, may we know when or how the relationship will not be created?
    Your response will be greatly appreciated. Thank you very much.
    Regards,
    Angelo

    Hi Venkatesh, thanks for the reply.
    Yes, the PLOGI - ORGA switch is set to X

  • I have been wrongly charged on my credit card.

    I had opted for some free skype credit offer but today skype charged me with Euro 9.9. I only had opted for the scheme becase it was free of cost. I dont with to avail this subscription on skype. Kindly reverse the transaction in my credit card account.
    Bhavini
    bhavini_mehta (skype id)

    Hi,
    In order to receive a refund, you need to contact Skype Customer Service.
    Please see: https://support.skype.com/en/faq/FA297
    If my answer helped to fix your issue, mark it as a Solution to help others.
    Thank You!
    Please send private messages only upon request.

  • Finding function to check whether this employee has changed Employee group

    I'm finding function to check whether this employee has changed Employee group from Temporary to Regular during the year or not.
    Is there any PY function can check as above condition?
    Thank you

    Hi,
    You have to read IT0001 data for reading Employee Group or Sub Group Change. Use the FM HRREADINF* to read IT0001 Data.
    Thanks & Regards,
    Sandip

  • MSN messenger telling me I have the wrong password

    All forms of msn messenger and Im+ and IMO. Facebook will sign in on the latter two but msn tells me I have the wrong password( I don't)

    I had (and have) the same problem.
    Today I uploaded the new firmware 7.2.1 and immediately the disk on the AEBS stopped allowing access claiming I got the password wrong. I downgraded to 7.1.1 tonight and the disk has started allowing access again. not a solution of course, but something with the upgrade must have been wrong....surely???

  • OAF, View object used with the clausule setWhereClause, show the error  not have been properly initialized.

    Hi to all,
    I'm new with oaf and in mi AM i have to VO that I use to find relative information to the one is shown to the user on a query region, after the user pressed the go buton  the CO request the AM tho load both VO and those information are used to show in a popup region to display and update. the main problem is when the popup region closes it send a submit to the server an the error "View object may not have been properly initialized during Update." is displayed
    The main page and the popup uses the same AM, the initM2mVo() and initTavleVo() are  called by the CO at the processRequest of the main PG, the popup dosen´t have a CO.
    This the AM that uses the main PG and the popup region
    package tasc.oracle.apps.tasc.m2m.imei.server;
    import oracle.apps.fnd.framework.OAViewObject;
    import oracle.apps.fnd.framework.server.OAApplicationModuleImpl;
    import oracle.apps.fnd.framework.server.OAViewObjectImpl;
    import oracle.jbo.Row;
    import oracle.jbo.ViewObject;
    // ---    File generated by Oracle ADF Business Components Design Time.
    // ---    Custom code may be added to this class.
    // ---    Warning: Do not modify method signatures of generated methods.
    public class ActualizarImeiAMImpl extends OAApplicationModuleImpl {
        /**This is the default constructor (do not remove)
        public ActualizarImeiAMImpl() {
        /*******************************USE FOR CUSTOM CODE****************************/
         * Inicializa el vo a través del cual se ejecutara la actualización del IMEI.
         * @param taskNumber
        public void loadImeiVo(String taskNumber) {
            OAViewObject voTableQry = getTableQryVO1();
            if (voTableQry != null) {
                voTableQry.reset();
                voTableQry.setWhereClause(null);
                voTableQry.setWhereClauseParams(null);
                voTableQry.setWhereClause("TASK_NUMBER = :1");
                voTableQry.setWhereClauseParam(0, taskNumber);
                voTableQry.executeQuery();
                if (voTableQry.hasNext()) {
                    voTableQry.next();
                    String idActuacion =
                        (String)voTableQry.getCurrentRow().getAttribute("IdActuacion");
                    String dsM2m =
                        (String)voTableQry.getCurrentRow().getAttribute("DsM2m");
                    String imei =
                        (String)voTableQry.getCurrentRow().getAttribute("Imei");
                    if (idActuacion != null) {
                        OAViewObjectImpl m2mVo = (OAViewObjectImpl)this.getTascTransEqInstM2mVO1();
                        m2mVo.reset();
                        if (!m2mVo.isPreparedForExecution()) {
                            m2mVo.setMaxFetchSize(0);
                            m2mVo.executeQuery();
                        m2mVo.setWhereClause(null);
                        m2mVo.setWhereClauseParams(null);
                        m2mVo.setWhereClause("ID_ACTUACION = :1 AND DS_M2M = :2 AND IMEI = :3 ");
                        m2mVo.setWhereClauseParam(0, idActuacion);
                        m2mVo.setWhereClauseParam(1, dsM2m);
                        m2mVo.setWhereClauseParam(2, imei);
                        m2mVo.executeQuery();
                        if(m2mVo.hasNext()){
                            m2mVo.next();
         * Carga los valores disponibles de IMEI según el taskNumber al cual pertenezca
         * el  IMEI seleccionado.
        public void loadImeiValuesList(String taskNumber) {
            ViewObject viewobject = this.getImeiListVO1();
            OAViewObject voTableQry = getTableQryVO1();
            if (voTableQry != null && voTableQry.getCurrentRow() != null) {
                String imeiType =
                    (String)voTableQry.getCurrentRow().getAttribute("Attribute17");
                if (viewobject != null & imeiType != null) {
                    viewobject.setWhereClause(null);
                    viewobject.setWhereClauseParams(null);
                    viewobject.setWhereClause("TASK_NUMBER = :1 AND ATTRIBUTE17 = :2");
                    viewobject.setWhereClauseParam(0, taskNumber);
                    viewobject.setWhereClauseParam(1, imeiType);
                    viewobject.executeQuery();
        /*******************************USE FOR CUSTOM CODE****************************/
        /**Container's getter for TableVO1
        public OAViewObjectImpl getTableVO1() {
            return (OAViewObjectImpl)findViewObject("TableVO1");
        /**Sample main for debugging Business Components code using the tester.
        public static void main(String[] args) { /* package name */
            /* Configuration Name */launchTester("tasc.oracle.apps.tasc.m2m.imei.server",
                                                 "ActualizarImeiAMLocal");
        /**Container's getter for TascTransEqInstM2mVO1
        public OAViewObjectImpl getTascTransEqInstM2mVO1() {
            return (OAViewObjectImpl)findViewObject("TascTransEqInstM2mVO1");
        /**Container's getter for ImeiListVO1
        public OAViewObjectImpl getImeiListVO1() {
            return (OAViewObjectImpl)findViewObject("ImeiListVO1");
        /**Container's getter for TableQryVO1
        public OAViewObjectImpl getTableQryVO1() {
            return (OAViewObjectImpl)findViewObject("TableQryVO1");
    this is the CO of the main PG
    /*===========================================================================+
    |   Copyright (c) 2001, 2005 Oracle Corporation, Redwood Shores, CA, USA    |
    |                         All rights reserved.                              |
    +===========================================================================+
    |  HISTORY                                                                  |
    +===========================================================================*/
    package tasc.oracle.apps.tasc.m2m.imei.webui;
    import java.io.Serializable;
    import oracle.apps.fnd.common.VersionInfo;
    import oracle.apps.fnd.framework.OAApplicationModule;
    import oracle.apps.fnd.framework.webui.OAControllerImpl;
    import oracle.apps.fnd.framework.webui.OAPageContext;
    import oracle.apps.fnd.framework.webui.TransactionUnitHelper;
    import oracle.apps.fnd.framework.webui.beans.OAWebBean;
    import oracle.apps.fnd.framework.webui.beans.layout.OAQueryBean;
    * Controller for ...
    public class ActualizarImeiCO extends OAControllerImpl {
        public static final String RCS_ID = "$Header$";
        public static final boolean RCS_ID_RECORDED =
            VersionInfo.recordClassVersion(RCS_ID, "%packagename%");
         * Layout and page setup logic for a region.
         * @param pageContext the current OA page context
         * @param webBean the web bean corresponding to the region
        public void processRequest(OAPageContext pageContext, OAWebBean webBean) {
            super.processRequest(pageContext, webBean);
            //get the handle to AM Attached to our Simple Page Region MainRegionRN
            //The page is passed as parameter to this method, hence we can get handle
            //to the AM quite easily
            OAApplicationModule am = pageContext.getApplicationModule(webBean);
            //verifica si la transaccion de creacion esta activa todavia
            if (TransactionUnitHelper.isTransactionUnitInProgress(pageContext,"ActualizarImeiM2m", false))
                // deshace cambios y finaliza Txn
                am.invokeMethod("rollback");
                TransactionUnitHelper.endTransactionUnit(pageContext, "ActualizarImeiM2m");
         * Procedure to handle form submissions for form elements in
         * a region.
         * @param pageContext the current OA page context
         * @param webBean the web bean corresponding to the region
        public void processFormRequest(OAPageContext pageContext,
                                       OAWebBean webBean) {
            super.processFormRequest(pageContext, webBean);
            //get the handle to AM Attached to our Simple Page Region MainRegionRN
            //The page is passed as parameter to this method, hence we can get handle
            //to the AM quite easily
            OAApplicationModule am = pageContext.getApplicationModule(webBean);
            //Detección del botón go de la región de query.
            this.queryButonGO(pageContext, webBean, am);
            this.updateImei(pageContext, am);
         * Detección del botón go de la región de query
         * @param pageContext
         * @param webBean
         * @param am
        public void queryButonGO(OAPageContext pageContext, OAWebBean webBean,
                                 OAApplicationModule am) {
            OAQueryBean queryBean =
                (OAQueryBean)webBean.findIndexedChildRecursive("QueryRN");
            String idGo = queryBean.getGoButtonName();
            if (pageContext.getParameter(idGo) != null) {
                String tareaId = pageContext.getParameter("TaskNumberLovInput");
                //Inicializa el vo a través del cual se ejecutara la actualización del IMEI.
                Serializable[] parameters2 = { tareaId };
                Class[] paramTypes2 = { String.class };
                am.invokeMethod("loadImeiVo", parameters2, paramTypes2);
                //Carga los valores disponibles de IMEI según el taskNumber al cual pertenezca  el  IMEI seleccionado.
                Serializable[] parameters = { tareaId };
                Class[] paramTypes = { String.class };
                am.invokeMethod("loadImeiValuesList", parameters, paramTypes);
        public void updateImei(OAPageContext pageContext, OAApplicationModule am){
            if (pageContext.getParameter("ActualizarImei") != null){
                String imei = pageContext.getParameter("ImeiPopup");
                //TODO......
    thanks to all.

    I thing I got the problem.
    I have the following configuration:
    One Main Page and external RN that is call as popup in main page
    2 VO, queries by java code, one to capture some information that is used to query the 2 VO that I use to update information by the popup.
    One AM that is map only in the Main Page. (Initially I had the external RN mapped to same AM as the main PG, but I remove it).
    The solution was remove the mapping of the AM from the external region and in the messageimput of the external region set the View instance and view Attribute manually in this fields (http://screencast.com/t/uDTALEedCh do not use the wizard ) as the one instanced am the AM, so the problem it seem that was that defining an AM to the external region create a new instance, causing that it can not see the information that I load manually in the VO by query it them.
    for this case there is not need to use the next code, because the Rows are load with information by the query in the java code, this only will have to be made when inserting a new row .
        public void initM2mVo(){
            //get a handle to the View Object that we wish to initialize
            OAViewObject vo = (OAViewObject)this.getTascTransEqInstM2mVO1();
            if (!vo.isPreparedForExecution()) {
                vo.setMaxFetchSize(0);
                vo.executeQuery();
            //Create a blank Row
            Row row = vo.createRow();
            //Attach that blank row to the VO. Data will be fed into this row, when the user types into the fields
            vo.insertRow(row);
            //Set the status of the blank row to initialized. This tells OA Framework that record is blank and must not be included in DML
            //Operations until    changes are made to its underlying VO [via screen fields]
            row.setNewRowState(Row.STATUS_INITIALIZED);

  • Doubts Employee group

    Good Afternoon,
    I have a doutbs,
    When HR run an action of leave of an employee, the field Employee group have that be changed to Retired or not?, or only with the status of employment P0000-STAT2(0 Withdrawn) is necessary?.
    I want know , what is the better practice?
    Regards.

    Hi, Kapil Kaushal , Sikindar 
    The system work fine with the field P0000-STAT2, because i have configured the feature MSN 31 in the table T529A for the action of leave. and in the leave the system automatically change the status to Withdrawn.
    I want know if the field PERSG also i have that change to retire or not is necessary ?
    I am changing in the action of leave this field PERSG , but a consultant said that not is necessary, and i want kown ¿what is the best practice?
    This is the doubt.

  • The following items have not been completely assigned to shipping group

    I am getting the below error:
    "The following items have not been completely assigned to shipping groups."
    We are using simple checkout with only shipping group applicable for order(HardgoodShippingGroup). It seems during some scenarios, ATG is creating one more shipping group of same type due to which I am getting the above error.
    Any pointers will be helpful

    HI,
    The error is displayed when the withholding tax has been changed in the master record of the vendor or customer. The change has been made after posting the invoice document, then at moment of payment there is a difference between withholding tax information in the invoice and the new withholding tax information changed in the master record.
    In order to prevent the system from the inconsistencies and to avoid the error message, please run report RFWT0010.
    Also, I would like to clarify the functionality of the report RFWT0010. If you have posted a vendor invoice relevant to withholding tax at time of invoice and later you change the master data so this withholding tax type is not longer relevant, this change will not take affect for the already posted invoice, althought you run report RFWT0010. Withholding tax amount at time of invoice is already posted and deducted If you later modify vendor master record and add a new withholding tax
    type relevant at time of payment, you will need to run report RFWT0010 before payment in order to take this withholding tax type into consideration, since it is relevant for payments.
    Please assign points if it useful.
    Regards
    Ravinagh Boni

  • I have been really messed up and defrauded by your employee. I have the email proof through this site, besides witness's.

    I have a record of my email and post regarding my problems with Internet Explorer 11, with my Windows 7, not working and connecting to other sites not nearly working as well as Int. Explorer 10. I was just told by support since I didn't have a case number,
    I had no proof. My email account in Microsoft is the same as with Verizon. So, I have proof on this site. Now, after I posted my complaint reg. Int. 11 not working nearly as well with my Windows 7. An employee from Microsoft took control of my computer for
    the 2nd time without notice. I was SO VERY clear about wanting to go back from Int.Ex. 11 to Int.Ex.10. An employee actually restored by computer without me asking from 10 back to 11, after I had some issues with hackers. As stated in my emails to you, Int.
    Exp. 11 never seemed to be very compatible in working with the add-ons and communicating to other sites. The guy who took over my laptop without permission, I thought was helping, ignored everything I asked for. I worked through the night and for about 10
    hours with him. I had to make 16 backup/restore disks, per him doing all the actions through Homegroup. I didn't even know u could take over my computer controls without permission. He made changes after changes, while I mostly kept my hands off the keys throughout
    the night and the day yest. I was just putting in disk after disk when it would pop out and he had the notice keep popping up, when he wanted me to change disks. I have not slept or ate for two days, cuz I kept working through hardcore stress. I didn't even
    follow what changes he was making cuz it was going to fast with things popping up everywhere. I would just have to ender Adminstrator ID and enter a few items. I did not make an alteration, cuz I did not want to mess it up. He completely ignored my email/post
    about consistently wanting to go from Int. Exp. 11 back to 10. I was so ill and tired, that I could barely keep up. After working with him, by just inserting disks mostly, I sent an email at the end to Microsoft saying that I don't think his repairs would
    work. This due to many issues, but mainly still not getting the add-ons for my different drivers. I had Google Chrome, Bing and the Int. Exp. 11 I wanted reversed, cuz he still could not get all the add-ons to work, with red checks over them and saying disabled,
    as long with other issues. I just kept having to put in my Adminstrator  passwords and he used my guest access as well, which I never use. I was so frustrated. NOT NEARLY AS UPSET AS A FEW-FIVE HOURS AGO, when I found it was worse than ever and the main
    thing I complained about and asked for, Int. 11 going back to 10, did not happen at all. There was just Int. Exp. 11 and he even took off my Google Chrome. I had no idea that my computer could also look different with different users. Icons being larger and
    in different places. It upset me horribly because I am ill cuz the stress I have been under and have not even ate since this began. I have proof via emails and also spent 10 hours following his lead. I had no idea, when I turned my laptop back on, it was NOT
    ONLY NOT WORKING CORRECTLY, BUT HE KEPT Int. Exp. 11 and never made the change. There were so many pages up, I could not see what he was doing. It took me 16 disks to just copy all the stuff in the drive. I also used tried to use the small cards, when the
    disks went way too fast. Now, my laptop is worse than even, with things saved all over my files, where I have no idea of what is what. He typed in the names to these backup files and I was too sick to keep up at all. I was so exhausted and sick at the end,
    I was just glad he was done. Like I said, I sent an email while he was still working on the issues, to you saying that it does not look good at all and would probably not work. He closed the approx. 20 windows that were open quickly, when the last disk backed
    up all the changes. I was feeling so horrible, I  had to just shut the laptop off and pray. Then, after resting for hours, I turn it on to find NO Int. Exp. 10 and still Int. Exp. 10. Many of the add-ons issues and a bunch of other things were worse than
    even. I called in for help, he was pretty rude, cuz I was/am exhausted, sick & upset. My laptop is arranged differently and also does not function correctly. I could have just uninstalled 11 and installed 10, like I asked about in my email. My files even
    said Int. Exp. 11 going to Int. Exp. 10. He ignored me and also left my computer way worse in other ways, with software uninstalled and items rearranged.  The guy who I spoke to a little while ago said I had no proof I even worked with him. Not only do
    I have records of what was sent, I had people swing by and they saw what was going on. I was complaining to them how exhausted/sick I felt for being up so long w/o food, while feeling helpless. The guy I just spoke with gave me case #1278021415. My email sent
    you guys while he still controlled my computer is through Microsoft. So, I am certainly not some crazy guy. I actually have been able to fix issues by hackers, etc., worse than this before. Now, my computer is way jacked, I need to work in a bit, and am so
    sick over this. Plus, I will probably have to hire someone to reverse all this horrible damage done. I cant believe even the computer looked different under my Admin. name & guest name. So many issues that I did not have and he did not even listen to what
    I wanted to change. I could have swithed 11 to 10, but I wanted to know the effect it would have on Windows 7 and docs, if any? I believe he worked on it so long, cuz he felt bad for going into my laptop the day before, without any notice, and restoring my
    computer back from Int. Exp. 10 back to 11. He was trying to help, but I did not even ask for any at that time. Now, my computer is jacked, I don't really trust all the backups disk/files, cuz so many. I could tell he knew what was saved where though. He did
    it all. I just was assisting, watching and trying to keep up with copying the info and putting in disks. Now, I am stuck with a messed up laptop and your tech wanted money from me, after your guy messed up my laptop bad, crazy things changed in 2 different
    settings/names and I have been not able to eat or sleep now for two days cuz of this. Then, your guy questioned if I was telling the truth. I have lots of property and am successful. I just didn't feel I should pay a company for unauthorizingly changing and
    breaking my stuff, while making me stressed and ill. I have 2-3 techs that handle issues, if I don't feel like dealing with them, but I actually know what to do on computers pretty well when not sick and rushed. I am no tech, but certainly no idiot. Its not
    hard to see things were not going well with red warnings all over the place and saying add-ons were disabled with big red marks over them. I am sure your tech knew, that is why he closed it so fast. Why did he not even try to change what I asked in my email??
    He completely ignored me and now I am ill and have a laptop way worse. Suppose to do some work in a bit, but I am so exhausted, hungry and back issues from all this typing leaning over (had X-rays a few weeks ago). I don't know what to do at this point off
    exhaustion and also being questioned if I was making it up or something. I have witnesses and the email. My headed on email that I sent through Microsoft is I want to go from Int. Exp. 11 to Int. Expl. 10, cuz the add-ons don't work as well and I get booted
    way more easily, or cant even reach other sites. I know it can be restored again, but it had issues before that I spend time and money fixing. I feel take advantage off and now blackmailed cuz your employee insisted that I pay for him just looking at the mess,
    your other employee created. Just makes me more sick. I could trust Int. Exp. 11 to work and now I feel no trust and much deception by your company. I will probably be sick for days and I know my back is out again and I am cramping cuz no food and ALL stress.
    I had an employee over watching me deal with all this happening, not friends, etc..  I saw he was using Homegroup and took down a few things. I knew it wasn't going well, but was in no shape to argue. Are you guys doing to do anything about this, or put
    the blame on me for trusting your employees. I just asked a couple questions and complained. I never said anything about hacking into my computer and messing my life up. This just is not right at all. A laptop is a pretty cheap fix for me, but I did just pay
    a guy over $200 to get things working well again cuz of hackers utilizing all the negative aspects about going onto some sites. I cant believe this happened. I cant believe this came from a large company, which I thought I could trust. Again, I have the email
    I sent while he was stick backing up the changes. It took hours, literally for all those darn disks. What will you guys do about this, cuz I am too sick to do anything for a bit. I was in the hospital just a couple weeks ago, cuz of stress and issues of this
    sort. Its so wrong!!  I want to give my info on here, but I am sure you will have it. The guy even said I didn't need to put my email address, I believe, or was it name, but I put it on my email sent anyway. I never lie!!  I look forward to your
    response, C. York   Also, the email address I use is for Verizon and I would prefer if u just sent it there or both places. I don't even want to look at this thing for a while, but my anxiety over this will probably force me to. I wish I could put
    in a phone number. Maybe I can somewhere, cuz I would like to know what you are thinking about all this. I know I got wronged, but I wish I knew who exactly. Like in my 2 email, while he was working, I saw "Hagan", I believe in response to a first
    post. I responded and asked question after reading it. I noticed when I went to post in public a bit ago, that I had never done that before. Just sent email direct, especially the 2nd, in which I have confirmation from your company. Again, last guy gave me
    case #1278021415. I thought I could trust your employee, so I did not get a bunch of info from him. I hope u know who was working on it, since he was when I emailed you. If you don't get my info somehow, please email me here, so we can communicate. I might
    post this a few places or keep it to post. I am so upset and shocked. Thank you!  C. York  

    What I wound up doing was installing the newest of the newest versions of firefox (it's at 5.0 or something now, I think). That just made all the plugins, add-ons, and extensions I wanted to get rid of obsolete and it auto-removed them on its own.
    I do really appreciate you taking the time out to try and offer some solutions though. Thank you very much for your effort!

Maybe you are looking for