Employee Photo in Adobe.

Hi All,
Any one tell me how to call the employee photo in Adobe form.
Regards,
Gokul Venkatesh

hi,
check the photo in database,if not there in photo ,goto se78.import photo to the database for your needs.
and call the photo attributes to the adobe form.
by
parthasarathi

Similar Messages

Employee Photo In Smartform or Adobe Interactive Form

Hi Everybody,
We need to diaplay employee Photo in smartforms or adobe interactive form for Employee ID Card.
We are not uploading employee photo tru SE78. We need to get Photo from archieve Link, image being displayed in PA20/PA30 transaction.
I had been tru Many threads, but couldn't find any proper solution.
Please suggest.
Thanks in advance.
Regards
Ravi

In forums, there are answers, but not the exact code. The most achieved is that one: Dynamically include a picture in smartform
Tell us if you need more information.

Opening tiff photos in Adobe Camera Raw

I can not open my tiff files / photos in Adobe Camera Raw. I am using CS6 that has been completely updated with all the current updates. I go to Bridge, highlight a tiff thumbnail photo and go up the file drop down menu. The open in raw selection is grayed out and I can not select it. It works fine with jpeg files, and I can open raw files without problems. It just won't work with tiff files. I have gone to preferences and selected the option to open all supported tiff flles but this did not work either.
I have uninstalled Photoshop and Bridge and reinstalled it and updated it all again and it still will not let me open tiff files in Camera Raw.
Any ideas?

I am more apt to beleive the issue is with the tif files themselves. Not all tif files are equal. It depends on the compression, bit mode and so forth. Can the tiff files be opened in photoshop? if so, then that just maybe the problem. if not, then the file itself maybe corrupt. But I am leaning towards the settings used when saving the file.

Calling infotype 0002 in ALV report for showing employee photo

Hi all,
The requirment from business side is a report in which employees personal data shuold be shown with employee photo, I had tried for employee photo in ALV report but it didnt sucessed, then I went for other solution like calling transaction in ALV report.
In this case I am calling Infotype 0002 but the issue is that the transaction PA20 is coming with PERNR but I am not able to go directlly to infotype which shows employee Photo,please suggest any solution.
Thaks.
JAY

Hi Jay,
It is possible. Please refer the syntax for the CALL TRANSACTION
CALL TRANSACTION ta { [AND SKIP FIRST SCREEN]
                    | [USING bdc_tab [bdc_options]] }.
You can do a recording till the required page comes & call the transaction accordingly. Hope, you are aware about the same.
For example, I just had a solution to go to the roles tab in the user profile and I did as below:
    CLEAR wa_bdcdata.
    wa_bdcdata-program = 'SAPLSUU5'.
    wa_bdcdata-dynpro   = '0050'.
    wa_bdcdata-dynbegin = k_ok.
    APPEND wa_bdcdata TO it_bdcdata.
    CLEAR wa_bdcdata.
    wa_bdcdata-fnam = 'BDC_CURSOR'.
    wa_bdcdata-fval   = 'USR02-BNAME'.
    APPEND wa_bdcdata TO it_bdcdata.
    CLEAR wa_bdcdata.
    wa_bdcdata-fnam = 'USR02-BNAME'.
    wa_bdcdata-fval   = g_value.
    APPEND wa_bdcdata TO it_bdcdata.
    CLEAR wa_bdcdata.
    wa_bdcdata-fnam = 'BDC_OKCODE'.
    wa_bdcdata-fval   = 'SHOW'.
    APPEND wa_bdcdata TO it_bdcdata.
    CLEAR wa_bdcdata.
    wa_bdcdata-program = 'SAPLSUU5'.
    wa_bdcdata-dynpro   = '0100'.
    wa_bdcdata-dynbegin = k_ok.
    APPEND wa_bdcdata TO it_bdcdata.
    CLEAR wa_bdcdata.
    wa_bdcdata-fnam = 'BDC_OKCODE'.
    wa_bdcdata-fval   = '=ACTG'.
    APPEND wa_bdcdata TO it_bdcdata.
    g_opt-dismode = 'E'.
    g_opt-defsize = k_ok.
*** if user click on the User Name, call SU01
    CALL TRANSACTION 'SU01' USING it_bdcdata
                OPTIONS FROM g_opt.
Regards,
Selva K.

Error while uploading employee photo

i m getting following eror while uploading employee photo through storage server
Error in HTTP Access : IF HTTP_CLIENT-RECEIVE 1 ICM_HTTP_CONNECTION_FAILED
Pls reply

Hi archana
you have to go with OAC0 tcode here in content repository double click on A5 which is standard one go in details-->clickon fulladministration then in that screen you will be having Basic path and Achive path there basis people need to give sapgui code.
they will be have this code in servermanagemt. i am not clear of this code where they can find. but i am sure of that this code will be given by basis people only. then go with OAOH tcode. give the details as usal and one more thing is that the photo should be save jpeg formate.
Regards
Suresh

Displaying Employee Photo using WDA in ESS

Hello Experts,
We have a requirement to dispaly employee photo in ESS.We are implementing ESS with Webdynpro ABAP.
we have created one archive link in R3(Content repository)
Please help me..
1) how to call this archive link from WDA...is there any standard WDA application in ESS
2) what is the correct process to display employee photo in ESS.
3)can we use Colloboration Demo role?
4) can we user Who's Who role? how we need to enable this role?
Please help..many of you have worked on this type of requirements..please share your thoughts and solutions..
thanks in advance for your help..
Regards
EP user1

Dear Vinodh
Normally there might be many reasons for pics not getting displayed, as u have said that the photo is already visible in R/3 then u need to check the following things
1) check S_WFAR_OBJ authorization object has been maintained or not.
2) Access T-code PZUSWHO & check whether the following settings are maintained or not.
Check these links as it entails how to upload the Photos
How to upload photos in SAP
Employee Photographs Mass Uploading to Backend System (ECC)
Kindly come up with screen shots,
Hope this solves ur problem.
Cheers
Pradyp

I am filling out a form that requires me to put a passport photo using Adobe Reader.

I am filling out a form that requires me to put a passport photo using Adobe Reader.
However, when I click on the square to insert the photo, a screen pops up telling me to "select a PDF file and import it as an image" and just an "OK" button to press.
When running the debugger, I get NotAllowedError: Security settings prevent access to this property or method. Field.buttonImportIcon:6:Field Click here to add a photo:Mouse Up. Any way around it? Below is the problem I'm talking about.

Thanks for your reply.
I've converted photos into pdf format and it still won't allow me to insert the photo. I wouldn't know whether it'd be too large or small since I cannot insert it in the first place.
"Warning: Javascript Windows: Select the PDF file to import this button as an image" is the message that keeps appearing. I can't seem to find anything related to this.

Get employee photo and display the photo in external system.

Hi,
We start to work with the portal....We want an application that display the employee photo..
The photo is the same one that appear in pa20/30...
We create the photos in OAAD and have a table repository.
How from here i can use this to build a RFC that return "data"..that from the external system we can show the photo,
Thanks.

write a RFC which uses
'HR_IMAGE_EXISTS' to get the image document id and then use 'ALINK_RFC_TABLE_GET' to image in JPG format convert the returned RAW table to xstring format using SCMS_BINARY_TO_XSTRING pass the resulting xstring as the export parameter of this RFC .
portal application can now use this xsring to render the image.
Regards
Raja

Employee photo is not updated in ESS Who's who service

hi colleagues,
i am facing an error when i am trying to update the employee photos in the who's who service of ESS.
when new photos are added against an employee number via tcode OAAD in the ECC system, they are updated against the record and can be seen in tcode PA20. however, the new photos are not getting updated in the who's who screen. we have tried clearing the cache (figuring there might be a problem with the browser.... we are using IE 7.0) but were still unsuccessful.
any advice will be greatly appreciated.
thanx,
Amer

hello deb,
already did.... not working there as well. except for the first time during logon, it does not ask for any user id or password while viewing the photo in the portal. the photo gets updated in PA20, PA30 but does not get refreshed in the portal. the portal shows the same old photo.
any comments or advice would be helpful.
thanx...

Employee photo is not displayed in ESS Who's who service

Hi colleagues,
Please help our colleague in this issue:
1) They have implemented correctly the procedure to display photos in PA20/PA30 and the current ITS based ESS who's who is displaying the photo.
2) They are trying to implement EP 7 with XSS BP 1.0 SP10 bold however in the Who's Who service the employee photo is not being displayed.
Best regards

Hi,
Yo would have check the forum..
Display Photo in Employee Who is who search
Kind Regards
Hari Sankar M

Employee Photo not displayed in ESS- Who's Who Services

Hi All..
My employee photo upload was successful in Quality System . I can also view the photo both in R/3 employee related facsmiles , header of PA20, PA30. and also the same photo's are displayed in ESS - Who's Who services.
steps I used-
OANR, OAC2, V_T585O, OAC3, OAC0 and for manual upload OAAD & OAOH.
For Mass Upload - program- OA_UPLOAD_AND_LINK
In production in the same way , all the photo's can be seen in the facsmiles but if I checked in Who's Who..Its coming like a outline with a red cross on top corner but without any photo.
Kindly give your valuable suggesions..
Thanks in advance...

Hi Alok,
I am also facing the same issue in Prod Environment. If u r having the solution, please share with me.
I checked in NWA Trace is not registering.
currently i am facing issue with Employee Photo Under ESS--> Emp Search --> Change Own Data.
All my Employee Photos are uploaded in ECC, i am able to see from PA30 Header.
we are having same setup in QA- Environment , all the employee Photos we are able to see from Portal.
But in Production Environment, We are Having One Central Instance and Three application Instances and configured Load Balancing among Central Instance and Application Instances.
All the Servers Content Server in SICF t-Code is activated.
If i login into Prod Portal [either Centeal Instance or Application Instance] some time Employee Photo is Displaying Some time not,i.e No Photo at the top of corner X symbol. If i right click check on that URL, its poiting to the ECC server content server.
But If Not is Displaying --> Size is Showing Not Avaliable but Demension is Displaying.
But if Photo is Displaying ---> Both Size and Dimensions are Displaying Properly...
PHOTO URL Path When Photo is Displaying
http://xxx025.xxx.com:8011/sap/bc/contentserver/490?get&pVersion=0046&contRep=A2&docId=4CA926D07B816545E1000000AC16020B&accessMode=r&authId=CN%3DMRP&expiration=20101016091012&secKey=MIH4BgkqhkiG9w0BBwKggeowgecCAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGBxzCBxAIBATAZMA4xDDAKBgNVBAMTA01SUAIHIBADFBNVRjAJBgUrDgMCGgUAoF0wGAYJKoZIhvcNAQkDMQsGCSqGSIb3DQEHATAcBgkqhkiG9w0BCQUxDxcNMTAxMDE1MDkwNjMxWjAjBgkqhkiG9w0BCQQxFgQUS%2BicVNGV7i6eSE8TXK5R3umNS%2FgwCQYHKoZIzjgEAwQvMC0CFQCPAZf3C48Lvl6i935mlsVqMw95owIUUJFedqFO2AoLGe6QCHHqBMSObIU%3D
Type : JPEG Image
Size : Not Avaliable
Dimension: 170*200 Pixels.
PHOTO URL Path When Photo is Not Displaying
http://yyy024.yyy.com:8010/sap/bc/contentserver/490?get&pVersion=0046&contRep=A2&docId=4CA927D07B816545E1000000AC16020B&accessMode=r&authId=CN%3DMRP&expiration=20101016091451&secKey=MIH3BgkqhkiG9w0BBwKggekwgeYCAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGBxjCBwwIBATAZMA4xDDAKBgNVBAMTA01SUAIHIBADFBNVRjAJBgUrDgMCGgUAoF0wGAYJKoZIhvcNAQkDMQsGCSqGSIb3DQEHATAcBgkqhkiG9w0BCQUxDxcNMTAxMDE1MDg1NzQ3WjAjBgkqhkiG9w0BCQQxFgQUAP9cyWhLiOtkp4vwo9KK%2FPQtxWgwCQYHKoZIzjgEAwQuMCwCFDs729ib7fVKbiGKz5CPPd1YHch3AhR7NVgtXJI7ej07GiKMpG06lZPWoQ%3D%3D
Type : JPEG Image
Size : 3527 Bytes
Dimension : 170*200 Pixels.
We are always opening the Portal with Fully Qualifies Domain Name (FQDN)
Please suggets the Solution, how to get rid of this Porduction Issue.
Thanks & Regards
Ganesh

How to maintain Employee photo in ESS who's who without sap_all and sap_new

Hi ALL,
Displaying Employee photo in ESS Who's who. it is working but with SAP_ALL and SAP_NEW user profiles.
My requirment is without SAP_ALL and SAP_NEW user profiles. how it is working where can i maintain authorizations for this issue.
The parameter i used are as follows:
Business obj: PREL
Doc type: HRICOLFOTO
Personal num: 00000094
Infotype: 0002
Photo type: .JPG
please help me.
Regaards
Satya.

Dear satya .
Please check the following
1. Trace with the t.code ST01 and check that object require.
2. The portal require the following obect:
S_SERVICE
S_RFC
P_PERNR
PLOG
P_ORGIN/ P_ORGINCON
P_HAP_DOC, if you work with Appraisal Document.
3. Check the table T77S0
P_PERNR, P_ORGIN, y P_ORGINGCON
4. Check that you have the roles need for ESS.
SAP_ESSUSER
SAP_ESSUSER_ERP05
SAP_EMPLOYEE_ERP05
SAP_EMPLOYEE_ERP_13
SAP_EMPLOYEE_ERP05_xx
SAP_EMPLOYEE_ERP_13_xx
5. Check the following notes:
SAP Note 857431 - ESS: Authorizations and roles for WD services in ERP 2005
SAP Note 844639 - MSS: Authorizations and roles for WD services in ERP 2005
SAP Note 1373177 - Back end authorization roles missing in EHP4
SAP Note 824757.
[ESS Quick Start|http://www.cogentibs.com/pdf/cogsap08/ESS.pdf]
Hope is help you.
Regards
consultor_ess_mss

Employee Photo Options?

All,
We are currently using a simple web repository to surface employee photos in SAP and non-sap content. We've configured ArchiveLink based employee photos in our sandbox environment and have an idea how that works. On one hand we'd like to pursue a standard SAP based solution for photos but are concerned that performance could suffer as the biggest consumer of our employee photos is SharePoint and SharePoint Search, sometimes serving up 25-100 photos per page. Does anyone have any experience with performance issues with employee photos in ArchiveLink? The archive.dll will prevent browser caching being a benefit. Any experiences in this area?
Also, what other options have been explored? Is anyone aware of any non-ArchiveLink based architectures that would be SAP supported, (work with sap content out of the box, but be performance friendly for O-SAP apps)? Anyone have experiences with employee photo architectures with Active Directory based photos or web repository, again that would be SAP supported and work with SAP content out of the box?
Any insights, links would be greatly appreciated.
Thanks,
Doug

Two SAP "ways" that are supported with standard services (like Who's Who from ESS)...
1. ArchiveLink (as you are well aware)
2. Make use of KM from the portal (since KM is basically a content server plus much more)...(*there is a portal equivalent to Who's Who that you can find info on)
#2 makes it much better from a performance standpoint. Also, SharePoint should be able to utilize the same repository.

Employee Photo - External HTTP service

Hi all,
currently I trying to setup the Employee photo dysplay in the portal Iview photo and in PA20/30 transaction. My problem is that I have the requirement to use an external http service that doesn't supports SAP Content Server HTTP Interface and it requires Basic authentication.
The access to the picture can be done by a direct url http://hostname/path/pernr.jpg ou using a dll service, http://hostname/path/service.dll?docid=pernr.
Does anyone ever face a similar problem, is there a way to implement this using "standard" features?
For example put the access logic to the picture in a function module or other object, and setup the z* object has the content server implementation.
Thanks and best regards,
Paulo Ruivo

Hello
Where are you trying to store the photos? In an external storage system or in the database?
If you are using an external storage system, please note that you must use either a different content server installation for each system, or at least a different content repository.
In case you are using the database storage, then make sure you have followed all the instructions from the note 595563 to do this. In case everything is fine, please go to OAC0 and test the connection to your content repository.
Additionaly please ensure that you have the lastest version of SAPHTTP installed on your system. Please review the SAP note 615354 for more information on this.
Thanks and Kind Regards
Ramana

Employee photo

Hi Experts,
I can save the employee photo from ESS. But after saving it i can't see it. It shows blank with a red cross. From the picture property I find the URL and when I am running it a popup generated "Do you want to save this file " for downloading the pic.The type of the pic is unknown. The same thing happen when I am trying to display it from R3 by PA30...and Extracts > Display all facsimiles option.
From R3 by T-code OAOH I can also store the pic " Stored document created successfully" and I can see it in the table TOAHR.
Please help.
Thanks and Regrds,
Sekhar

Hi Priyabrata
Thanks for ur reply.
I am giving u the details :
Transaction code: OAC2
Table TOAVE
Document type HRICOLFOTO exists with document class JPG.
Transaction code: SM31
Table V_T585O (View)
Document type HRICOLFOTO linked to object type PREL and Infotype 0002.
Transaction code OAC0
Content Repository A2
Document Area ARCHLINK
Storage Type SAP System Database
Version 0046
Description Content Repository HR KW / Employee photo
I have also activate the Content Server service from R3 , T-Code SICF and made an alias and also asign an user to this service with sapall permission.
Please help.
Thanks,
Sekhar

Employee Photo in Adobe.

Similar Messages

Maybe you are looking for