Employee photo is not updated in ESS Who's who service

hi colleagues,
i am facing an error when i am trying to update the employee photos in the who's who service of ESS.
when new photos are added against an employee number via tcode OAAD in the ECC system, they are updated against the record and can be seen in tcode PA20. however, the new photos are not getting updated in the who's who screen. we have tried clearing the cache (figuring there might be a problem with the browser.... we are using IE 7.0) but were still unsuccessful.
any advice will be greatly appreciated.
thanx,
Amer

hello deb,
already did.... not working there as well. except for the first time during logon, it does not ask for any user id or password while viewing the photo in the portal. the photo gets updated in PA20, PA30 but does not get refreshed in the portal. the portal shows the same old photo.
any comments or advice would be helpful.
thanx...

Similar Messages

Employee photo is not displayed in ESS Who's who service

Hi colleagues,
Please help our colleague in this issue:
1) They have implemented correctly the procedure to display photos in PA20/PA30 and the current ITS based ESS who's who is displaying the photo.
2) They are trying to implement EP 7 with XSS BP 1.0 SP10 bold however in the Who's Who service the employee photo is not being displayed.
Best regards

Hi,
Yo would have check the forum..
Display Photo in Employee Who is who search
Kind Regards
Hari Sankar M

ESS- Employee Photo is not displaying.

Dear All,
Employee photo is not displaying in Who's who application of Employee search.
By right click help gone through the Properties.
It is giving message that..
"800?get&pVersion=0046&contRep=Z2&docId=E135E81A75C422F1B0B95CF3FC94086E&accessMode=r&authId=CN%3DPR1,OU%
3DI0020259918,OU%3DSAPWebAS,O%3DSAPTrustCommunity,C%3DDE&expiration=20120104085649&secKey=MIIBUgYJKo
ZIhvcNAQcCoIIBQzCCAT8CAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGCAR4wggEaAgEBMG8wZDELMAkGA1UE
BhMCREUxHDAaBgNVBAoTE1NBUCBUcnVzdCBDb21tdW5pdHkxEzARBgNVBAsTClNBUCBXZWIgQVMxFDASBgNVBAsTC0k
wMDIwMjU5OTE4MQwwCgYDVQQDEwNQUjECByARBQkJWFkwCQYFKw4DAhoFAKBdMBgGCSqGSIb3DQEJAzELBgkqhkiG
9w0BBwEwHAYJKoZIhvcNAQkFMQ8XDTEyMDEwMzA4NTY0OVowIwYJKoZIhvcNAQkEMRYEFOB%2Fx7LoOChOjGW3iIGG
FxjjpJkMMAkGByqGSM44BAMELzAtAhRpHueDstxejUkJ0F2j7PNmxPu5xQIVAILHJcNOP7pvx%2BbPVgmDX%2F5Osaby"
here 800 is client number and Z2 is the content repository name.
also
http://<Host>.xxxxxxxxx.com:<port>/sap/bc/contentserver/800?get&pVersion=0046&contRep=Z2&docId=E135E81A75C422F1B0B95CF3FC94086E&accessMode=r&authId=CN%3DPR1,OU%
3DI0020259918,OU%3DSAPWebAS,O%3DSAPTrustCommunity,C%3DDE&expiration=20120104085649&secKey=MIIBUgYJKo
ZIhvcNAQcCoIIBQzCCAT8CAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGCAR4wggEaAgEBMG8wZDELMAkGA1UE
BhMCREUxHDAaBgNVBAoTE1NBUCBUcnVzdCBDb21tdW5pdHkxEzARBgNVBAsTClNBUCBXZWIgQVMxFDASBgNVBAsTC0
kwMDIwMjU5OTE4MQwwCgYDVQQDEwNQUjECByARBQkJWFkwCQYFKw4DAhoFAKBdMBgGCSqGSIb3DQEJAzELBgkqhki
G9w0BBwEwHAYJKoZIhvcNAQkFMQ8XDTEyMDEwMzA4NTY0OVowIwYJKoZIhvcNAQkEMRYEFOB%2Fx7LoOChOjGW3iIG
GFxjjpJkMMAkGByqGSM44BAMELzAtAhRpHueDstxejUkJ0F2j7PNmxPu5xQIVAILHJcNOP7pvx%2BbPVgmDX%2F5Osaby
Please help to solve this.
Regards,
Potru.
Edited by: N Potru on Jan 3, 2012 10:21 AM

Hi Siddharth,
http://yyyy.xxxxxxxxx.com:8000/sap/bc/contentserver/180?get&pVersion=0046&contRep=Z2&docId=E141FAA8EA53BEF1B0AF00145E190D9D
When I right click on that Place system is giving this error.
I have maintained number ranges for photo upload. I have uploaded 3 photos and checked the number range but it is showing current number as 0. means no number is generating from the number ranges.
Thanks,
Potru.

Lync 2013 Photos will not update from AD

I recently joined a company who has Lync 2013, Exchange 2010 and AD is at a 2003 functional level. We are experiencing issues where Lync photos are not updating from AD correctly. I have checked the pre-reqs; Replicate this attribute to the Global
Catalog is set for the ThumbnailPhoto attribute. We are also forcing photos from AD only (or no photo) by setting the following:
"Set-CsClientPolicy -Identity PhotosControl -DisplayPhoto PhotosFromADOnly"
and finally we are setting the photo in ad using:
"Import-RecipientDataProperty -Identity "Test User" -Picture -FileData ([Byte[]]$(Get-Content -Path "C:\pictures\testuser.jpg" -Encoding Byte -ReadCount 0))"
The pictures being uploaded are under 10KB and update within Outlook but never updates on Lync. I have also manually tried running the "Update-CsAddressBook" command from Lync and waiting 24hours + but the photo will not update in Lync. I have
also tried a 3rd party utility that grabs the attribute directly from each DC individually and each node is displaying the correct photo. Any Ideas?
EDIT: I did some more testing and can say with quite a bit of certainty there is something not quite right on the Lync side of things. I started with the company over a month ago and although users can see my original photo that was added to AD, I myself
do not even see it loaded in my client yet. I've completly dumped my local Lync cache but no change. Is there a specific Lync Server service that handles retrieving/pushing photos to the Lync clients?

Thank you so much for your reply, it was very helpful in understanding how the service is suppose to work however I have still not been able to correct the issue.
What I have found by using your article may have narrowed down the scope of the problem. I was able to find that on our Lync file store, the cached contacts/photos are being updated daily (as expected) and actually contain the correct photos. I confirmed
this be using abserver.exe on the .lsabs file and then locating the contactID for a few users I know are not updating properly. Once I have their contact ID I simply look for their .photo file in the cached files, copy it out to a different location and change
it to a .jpeg. To my surprise the photos are actually the correctly updated ones, so why are these no getting to the users/clients? I have gone through and deleted my local cache folder as well as the registry key HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Lync
but unfortunately no change on my Client. I still see these users original photos.
Another piece of the puzzle; We are also working on letting mobile devices connect to our Lync infrasructure as well. This is not fully functional yet however during my testing I did get Lync client for android running for a little while and low and behold
the pictures are actually correct on my mobile device!! Surely this must give some kind of clue?
We are planning to upgrade Exchange from 2010 to 2013 and I hoping that leveraging the HiDef photo capabilities for Lync 2013 with Exchange 2013 may fix this issue. What do you guys think?
More info on the environment:
4 main sites + remote users
~7DC's - 2003 DFL (1 at each site + a few at HQ)
3 Lync Front end servers (2013) (All located at central HQ)
2 Lync edge server (2013) (All located at central HQ)
1 - 2010 Exchange server (Located at central HQ)
2013 Lync Client version 15.0.4675.1000 MSO 15.0.4675.1002 64bit
About 100 HP 4110 Lync Edition Desk phones
Users's workstations are either Windows 7 Enterprise or Windows 8.1 Enterprise

HT204053 i photo will not update it says it was either bought under another apple ID or cancelled but this is not the cas

i photo will not update it says it was either bought under another apple ID or cancelled but this is not the case, what do i do?

Which iPhoto version and MacOS X version did you update from? Did you previously have iPhoto 9.5.1 and Mavericks installed or earlier versions?
Did you use a different Apple ID when you set up the Mac? If iPhoto came preinstalled, it will be bound to the apple ID you first used, when you set up your Mac.

Lightroom 5: After paste settings photo is not updated with new settings applied (sometimes)

Hi all,
anyone have seen same bug as me? When I copy develop settings with CTRL+SHIFT+C and then paste it to another photo with CTRL+SHIFT+V, sometimes the photo is not updated/rendered with new settings applied -> and yes, I see "paste settings" step in photo "history window". So when I press Undo and then Redo key, photo will render updated.
I did try to reinstall LR 5 and optimize catalogue, problem is still there.
(Win 7 x64, latest LR 5.6)

Yes, I have similar problems. I'm guessing it's down to file size: With NEFs from my old D70 (5MB average) there was no problem, but with D610 files (30MB average) I'm getting a few problems, including 'not pasting settings'.
LR seems to struggle with larger files. Don't have a solution, unfortunately.

Photo stream not updating

My Photo Stream is currently not updating in Photo's. The last picture imported from my photo stream was April 7th? Any trouble shooting for this? All preferences are checked to automatically upload pictures taken with my iPhone to my photo stream so they should be in the iCloud section of Photos. Any help would be greatly appreciated!

Try disabling both the My Photo Stream and iCloud Photo Sharing in Photos' iCloud Preference pane. Close Photos, reboot, open and reenable them. See if that will jumpstart the My Photo Stream.

HT201317 photo stream not updating

Photos added to iPhone 4 Photo Stream folder do not update in PC folder. iCloud is enabled on phone and Windows 7, phone is Wi-Fi connected.

You may have enabled iCloud on your devices, but did you also turn on photo stream? Check in Settings>iCloud on the iPhone. Check the PC as well, but I don't know where that's done, as I use a Mac.

Photo stream not updating after Aperture update

I installed ML and after I did that saw there was an update for Aperture 3. So, I updated to 3.3.2. Now, when I open up Photo Stream, it does not update. My phone and iPad both update with the stream but not Aperture. I checked all my settings and that is enabled. Any clue as to the problem?
Thanks!

I have to wonder if this problem is somehow server related. I did had this problem, even over multiple restarts of Aperture. I fired up Aperture this morning and the sync worked.
A couple of things that may contribute:
1. This is a start of a new month. I wonder if that played into it.
2. I rename my Photo Stream Project so that they will display in order alphabetically. Can't say if I had renamed a project of an active month previously, but I know i did that for July. The funny thing is my renamed July Project still synced correctly. In the future, I think I'll wait until the month is over to rename the project.

Photo stream not updating on windows PC

icloud used to work with my ipad and download the photos to My Photo Stream. It has stopped doing this. I have now connected an iphone to the cloud and all the photos have downloaded to it. Why will the photos not update to my windows PC?
If I delete all the photos in My Photo Stream it will only update some of the photos for a two week period. (back in November last year).
Any assistance would be welcome.

Hello,
Sorry for the trouble. That shouldn't happen! I am Vineeth and I am from the Norton Support team.
Can you please disable the Smart Firewall feature in your Norton product temporarily and see whether you can update the iCloud photos? If you can do that, then we may need to allow the iCloud application under the firewall.
Thanks!
Vineeth
Norton Support

Employee photo is not Displaying on the PDF form

Hello Experts,
We have a static form and passing the form data and photo repository URL (Used FM to get the URL of the photo 'HRMSS_RFC_EP_READ_PHOTO_URI' ) to the form. And all these sent to ADS for made complete form.
But we are facing the probelm that Photo is not diplaying on the form. We have found that Photo URL is not worked priviously
now made the changes in OAC0 and working fine. But the photo is still not showing on the form.
Can anybody help us
      Logic to call the PDF Form
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
    EXPORTING
      i_name     = lc_formname
    IMPORTING
      e_funcname = ld_fm_name.
*Function to open form processing
Set output parameters and open spool job.
ls_fp_outputparams-nodialog   = lc_x.
ls_fp_outputparams-getpdf     = lc_getpdf.      "'M'
ls_fp_outputparams-connection = lc_connection. "'ADS'
ls_fp_outputparams-bumode     = lc_bumode.      "'M'.
ls_fp_outputparams-assemble   = lc_x.
***Function module to open the Spool Job
CALL FUNCTION 'FP_JOB_OPEN'
    CHANGING
      ie_outputparams = ls_fp_outputparams
    EXCEPTIONS
      cancel          = 1
      usage_error     = 2
      system_error    = 3
      internal_error = 4
      OTHERS          = 5.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Regards,
Raj

Image of Employee
      CALL FUNCTION 'HR_IMAGE_EXISTS'
        EXPORTING
          p_pernr               = wa_itab-pernr
        IMPORTING
          p_connect_info        = p_connect_info
        EXCEPTIONS
          error_connectiontable = 1
          OTHERS                = 2.
      IF sy-subrc = 0.
        CALL FUNCTION 'SCMS_DOC_READ'
          EXPORTING
            stor_cat              = space
            crep_id               = p_connect_info-archiv_id
            doc_id                = p_connect_info-arc_doc_id
          TABLES
            access_info           = lt_infos
            content_bin           = lt_image_bin
          EXCEPTIONS
            bad_storage_type      = 1
            bad_request           = 2
            unauthorized          = 3
            comp_not_found        = 4
            not_found             = 5
            forbidden             = 6
            conflict              = 7
            internal_server_error = 8
            error_http            = 9
            error_signature       = 10
            error_config          = 11
            error_format          = 12
            error_parameter       = 13
            error                 = 14
            OTHERS                = 15.
        IF sy-subrc = 0.
          READ TABLE lt_infos INDEX 1 ASSIGNING <fs_info>.
          IF sy-subrc = 0.
            CALL FUNCTION 'SCMS_BINARY_TO_XSTRING'
              EXPORTING
                input_length = <fs_info>-comp_size
                first_line   = <fs_info>-first_line
                last_line    = <fs_info>-last_line
              IMPORTING
                buffer       = l_employee_photo_content
              TABLES
                binary_tab   = lt_image_bin
              EXCEPTIONS
                failed       = 1
                OTHERS       = 2.
            IF sy-subrc = 0.
              wa_itab-pic = l_employee_photo_content.
            ENDIF.
          ENDIF.
        ENDIF.
      ENDIF.
      MODIFY itab FROM wa_itab.

Shared Photo Streams Not Updating?

About a week ago I realized my shared photo streams were not updating. I am not recieving any new photos that my friends are posting, and when I upload new photos they don't go to any of my friends' devices. How can I fix this problem?
Thanks!

I have had the same problem - Shared Photo Streams (evidently) do not update dynamically. There is also no button to force an update in the photo app either.
On your iDevice by going into Settings > Photos & Camera and switching off "Shared Photo Streams". Go into your Photo app and check that they have been removed.
Now go back into the same Settings sub-menu and re-enable "Shared Photo Streams". Back in the Photo app, you will see the shared stream update with the correct photos.
I have the exact same problem with any shared photo streams I create on my iPhone - they do not appear on my iPad unless I do the above. The same goes for iPhoto/Aperture on my Mac.

Icloud photo strean not updating

I'm using the latest version of icloud on windows 8.1 and the photo stream is not updating. What should I do? I've tried sign out and reinstall it and it's still not updating new pictures.

I end up using onedrive instead. Apple really did a great job in hardware engineering but ***** at software especially on windows platform.

The iCloud - Streaming photos are not updating in PC

Hello ifriends!
You see, a month ago aproximately my Streaming photos are not being updated. Normally if I took pictures from my ipad or iphone they would automatically appear in my Streaming Photos folder. But now is not working in my PC.
I have checked:
i pad: Activated the ICloud and Streaming photos say "yes"
i phone: Activated the icloud and streaming photos say "yes"
PC: i cloud is activated and Stream photos Download folder "My photo stream"
So in PC the photo stream is being empty...
Do you happen to knwo why? Thank you in advance for your help
TITA

Same is now happening to me. I've had the 4S over a year and its no longer streaming as of last month

After upgrading to Yosemite my I photo will not update

My iPhoto will not update because of a error with a previous owners password my brother owned the iMac before me he signed out of everything.

Signing out does not eliminate the problem: If he didn't erase the hard drive and reinstall the original OS, you will not be able to update the app(s) as they are tied to the Apple ID used to obtain them and the license is not transferable. This is spelled out in the licensing agreement; your options are: not to update apps and never reinstall the OS, or:
if it came with Lion or later, use internet recovery, wipe the drive, and reinstall the original OS; after that, update to Yosemite. If it came with Snow Leopard or earlier, use the install DVD to wipe the drive and reinstall, then update.

Employee photo is not updated in ESS Who's who service

Similar Messages

Maybe you are looking for