Employee Photo Upload Fail - "System error when archiving"

Hi all,
When i am trying upload a photo of an employee in our ESS development portal its working fine. But the issue here is when i am trying to upload the same in testing ESS portal its displaying an error message as "System error when archiving a photo" and i tried to upload the photo in back end also at that time its displaying an error as "HTTP error :401 unauthorized".
Kindly help me to resolve this problem ASAP.
URGENT!!!!!!!
Thanks in advance..!!!

Hi Van,
Thank you for your reply. Finally we found the solution for this. The Issue was that the user CONT_SERVER in SICF(tcode) -> Content Server was locked. We unlocked it , now the photos are uploading successfully...

Similar Messages

System error when archiving a photo

Hi,
I can store employee picture successfully in R3 (T-Code: OAOH). I can
see it there too by Extract->Dispaly all facsimiles in PA30 for that
employee.
But I can't see the picture from ESS ,only a frame is coming. The URL
of the picture is <R3 hostname>:8000. But the ITS service i.e content
server is <R3 hostname>:8001. If i give 8001 then the picture is
comming. I can't store any picture from ESS ..."System error when
archiving a photo".
I can delete the picture in TOAHR table from the ESS by removing the
employee pic though i can't see it.
We have 2 cluster instances...1) sapprddb 0 (message server is under this)
2) sapprdapp 1 (application server r3)
Please help...
Thanks and Regards,
Sekhar

Hi,
Thanks for ur reply. But I have already gone through the steps. I can see the picture from R3 and store it there. But the problem is in ESS (portal). I can't store it from ESS as the address it going to store is <R3 hostname>:8000/fp/bc/contentserver........The actual should be <R3 hostname>:8001/fp/bc/contentserver........
Plz suggest me where from it take the value 8001 in portal for employee pic. For all other T-iview working fine. Telnet to 8000 is not possible, but 8001 is ok.
Thanks,
Sekhar

System error when archiving a photo/file

Hi Experts,
here we are using EP 7, and MAXDB 7 as backend and SAP content server AIX 5.3, apache 1.3, when we are checking in SAP content server srkp09, we tested all 3 possibilities like single test, multiple test, and runtime test all the tests are successful, as part of portal side for a employees chnage own data we are trying to attach a photo ->Review and save -> we getting message attachment save to Database. !System error when archiving a photo. please advice how to rectify this problem ? is this is part of content server issue or portal issue.
waiting for your quick help on this
Thanks & Regards
VenkataSurya

Hi,
Thanks for ur reply. But I have already gone through the steps. I can see the picture from R3 and store it there. But the problem is in ESS (portal). I can't store it from ESS as the address it going to store is <R3 hostname>:8000/fp/bc/contentserver........The actual should be <R3 hostname>:8001/fp/bc/contentserver........
Plz suggest me where from it take the value 8001 in portal for employee pic. For all other T-iview working fine. Telnet to 8000 is not possible, but 8001 is ok.
Thanks,
Sekhar

Photo upload failed. Error returned from Facebook: An unexpected error has occurred. Please try your request later

I've been getting this error everytime I try to upload photos to the Facebook publishing service has anyone encountered this before? upload through flicker is fine though

I am getting the same error. Did you have any luck getting this to work?

Not all of my photos upload to my website when I publish it. when my site finishes publising I get an error that says, "There was an error communicating with the FTP server. Try again later, or check with your service provider."

Not all of my photos upload to my website when I publish it. when my site finishes publising I get an error that says, "There was an error communicating with the FTP server. Try again later, or check with your service provider."

I am publishing directly to an FTP server (option 1). Is this the optimal method or should I be publishing to a folder and then (how do/would I?) publish to my hosting domain?
I'm wondering if this has really anything to do with the publishing process, or whether it just has to do with the photos and/or the photo albums. I've deleted the photo albums with the missing pictures from my site on iweb thinking a file might be corrupt. (I'm getting the albums from iphoto -- drag/drop method into iweb) I then replaced these albums with the same albums as the previous ones from iphoto and then published my site again -- and the EXACT same photos were once again missing in the NEW albums as were missing in the old albums...
Maybe it is a publishing issue, or it could be a photo/file issue. However, these albums aren't very large -- the largest containing 135 photos --
Please! if you have any suggestions or ideas as to what is happening I would be greatly appreciative!
I'm pulling my hair out here trying to diagnose the problem...

Employee photo upload in portal and to be saved in infotype 0002

Hi Everyone,
       I got an requirement where in ESS Portal, through "Change Own Data" link, employee is uploading his photo and it has to be saved in infotype 0002. Below are the doubts i have,
1. There is no field for photo in infotype 0002, so how it will be saved in 0002.
2. After uploading and clicking preview button, error was raising saying 'Error when archiving the photo'.
3. I seen in many forums that the employee photo is visible from PA30. how it will be visible in that tcode ?

Hi Chris McNarney,
      Sorry for long delay for replying.. According to you,
1. I checked the service under /default_host/sap/bc/conentserver/ it was activated and moreover below is the logon data,
        Client           500
     User             XXXXXX
     Language
     Password Status Set
and what is the use of this logon data..
2. According to your link [https://wiki.sdn.sap.com/wiki/display/ERPHCM/Add%20Employee%20Photo%20on%20Infotype%200002?showChildren=false|https://wiki.sdn.sap.com/wiki/display/ERPHCM/Add%20Employee%20Photo%20on%20Infotype%200002?showChildren=false],
there it has 4.7 version in that they told to create A2 repository with Tcode: OAC0 with details,,
     While creating the repository, keep the Document Area blank, Storage type as R/3 database, Rep. Sub-type will appear as Normal by default, Version No. as 0046 and in Contents table put 'SDOKCONT1' as the table name.
    With that screen im am not able to find table name field to put 'SDOKCONT1' as input and moreover SAP system database is there instead of getting R/3 database for storage type. Screen detilas below,
Content Rep.    A2                               Active
Description
Document Area
Storage type
Version no.     0046   Content Server version 4.6 as the table name.

Failed 'System Error'

I Have a HP LaserJet Pro P1102w printer successfully connected to the HP ePrint service.
I am able to email & print basic emails and also emails with attachements from it using any webmail service.
If I send an email from our server in work that doesn't contain an attachment - this prints off fine...
However, when an email is sent from our e-mail server in work with an attachment.. I get the notification email back to say 'ePrint job received'..but nothing prints out at the printer.
When I check in the printer activity in the HP ePrintCenter online.. it always displays the status as 'Failed - System Error'
Anyone any ideas why this could be?
Thank you!!

Also getting this. How do I get details on what's causing the issue? Can anyone help debug? Need email headers?

I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."

I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."
i tried adding user macintosh hd/users/your_user/pictures/"photo booth" but still photo booth is not working and even images in photo booth cant be deleted they keep coming back

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box markedAllow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Error in Local Message System: Error when opening an RFC connection Message

Hi Gurus,
We are not able to create support messages in our ECC production system but it can created in Development and Quality. Support message created appears in solution manager system. ECC System displays error message as
Error in Local Message System: Error when opening
an RFC connection Message was Not Created
I have checked RFC connection between ECC and Solution Manager which displays following message
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: partner "local:sapgw00' not reached
Error Details     LOCATION: SAP-Gateway on host local / sapgw05
Error Details     DETAIL: NiPConnect2
Error Details     CALL: connect
Error Details     COMPONENT: NI (network interface)
Error Details     COUNTER: 40142
Error Details     ERROR NUMBER: 10060
Error Details     ERROR TEXT: WSAETIMEDOUT: Connection timed out
Error Details     MODULE: nixxi.cpp
Error Details     LINE: 2835
Error Details     RETURN CODE: -10
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Wed Jan 11 23:26:54 2012
Error Details     VERSION: 38
Kindly Help.....

Hi
Based on the instance number of the servers, you can determine the gateway to be used.
IF your ECC instance number is , 01 then gateway would be , sapgw01 (in ECC system)
So check and change the settings accordingly, in the RFC connection. Also check, if this entry sapgw01 is made in /etc/service file. Also check, in transaction smgw for gateway parameters.
Hope this info helps,
~ Raj

KP06 Cost Center Budget Planning System error when locking the data records

Hi,
While updating Cost Center Planning system(KP06) its giving the below error:
System error when locking the data records.
Message no. KI502
Diagnosis
The lock to protect the data records being processed could not be set. The
probable reason for this is that the SAP locking table is full and no more
entries can be added.
Procedure
Inform your system administrator immediately
No planning data has been changed
Message no. K8038
Diagnosis
You used Post. While preparing the data for posting, the SAP System
determined that no changes were made in the available databank values.
System Response
A posting activity price is not necessary
Please help me how can we rectify the above error..
Thanks
VS Rao

Hi,
check the locking entries (t-code SM12).
http://help.sap.com/saphelp_erp2004/helpdata/en/37/a2e3ae344411d3acb00000e83539c3/frameset.htm
Best regards, Christian

'System Error' when trying to save Form Manager Registry Settings

Hi,
trying to save changes made in the form manager registry settings [Home > Services > Adobe LiveCycle Form Manager > Registry Settings (http://localhost:8080/FormManagerAdmin/registry-cfg-load)], I get an error, which reads:
> System Error
>
The request could not be processed. Please retry the operation. If the problem persists, please contact your system administrator.
Has anyone had this error as well?
The system runs fine apart from the jboss log files being crammed with the well-known and pretty annoying
SpyJMSException.
Does anyone have an idea how to apply changes to the form manager registry settings, if the web ui does not work? Where are the 'form manager registry settings' being stored? Maybe I succeed in changing the settings manually at least without having to re-install Livecycle...
Regards,
Steve

We are using JBoss 3.2.5.
Weirdly, last week a collegue of mine was able to save the registry changes. This week, both of us get the 'System error' when trying to save changes. Even using a default Administrator account, we were unable to save changes.
Is there any other way apart from the LiveCycle web UI to change the registry settings without having to re-install the server? Where are these values stored?

I have a system error when trying to open my itunes on my laptop. Should I unistall and reinstall itunes?

i have a system error when trying to open my itunes on my laptop. Should I unistall and reinstall itunes?

The first error comes when i open my laptop:
APSDeamon.exe - System Error
The program cannot start because MSVCR80.dll is missing from your computer. Try reinstalling....
when I try to open Itunes, it says:
iTunes.exe
iTunes was no installed correclty, please re-install itunes
Thanks!
Annabel

System error when trying to open Ngage?

It was working up until today. Now I just get "system error" when I try opening it. I have tried installing n gage again and even deleting n gage but still the same problem.
Any ideas?

04-Nov-2008 11:01 PM
liam182 wrote:
lucky just found answer in time was about to re install phone memory. All because of one little router character
see here
http://zomgitscj.blogspot.com/2008/11/n-gage-system-error.html
Good to know my blog was of help to you
Mobile News, Reviews and More : http://UnleashThePhones.com/

System error when sync e-mail

Hello,
in the menue "Settings - Connectivity - Data transfer - Sync - Options - Synchronise" I get the message "system error" when I want to sync e-mail. The email settings in the sync profile are:
database in phone: ovi
sync e-mail database: ./e-mail/unfiled
Can anybody help.
Txs
Inge

im having the same problem with my new e72..plz help

N85--system error when i open n-gage!

wat shud i do now? just a day back i got n85 and it says system error when i open the n-gage application.. so i deleted it!!
now what??
What's Worth Doing, Is Worth Doing Well!
All "N-series" are incredible!

the problem still persists... can anyone has the relevant experience to help in this matter.. i emailed nokia, their solution did not work too...
What's Worth Doing, Is Worth Doing Well!
All "N-series" are incredible!

Employee Photo Upload Fail - "System error when archiving"

Similar Messages

Maybe you are looking for