Employee profile and status change?

Hi All,
Is ther any function module for Employee profile and status change in HR?
Thanks
Sundar

hi,
use these fm.
HR_ECM_READ_INFOTYPE_1001,
HR_INFOTYPE_OPERATION.

Similar Messages

  • Status profile and status change in opportunity

    Hi All,
    I have a business requirement to convert an opportunity type from one to another without creating another document
    when user changes the status from in process to approved. Along with converting from OP6 to OP2, I have to change the status to in process also.How can I achieve this in CRM 7.1 version?
    Thanks
    Andy

    The status profile for OP2 and OP5 are different.
    So just by passing OP2 in orderadm_h is giving an error status profile can't be assigned to OP2"
    any suggestions to try some other way?

  • How to use the selection profile and status profile for production order?

    Hi expert,
       I want to know how to use the selection profile and status profile for production order. what's the usage for these two selection profile and status profile ?
      Please help me.
      thanks in advance.
      george.shi

    Hi George,
    There are are two types of statuses.One is system status and second one is user status.These statuses will tell us current situation of an order.
    We can't change system statuses.But we can create our own statuses through status profile.With this profile we can control user statuses.
    In this status profile,
    1.We define the sequence in which user statuses can be activated,
    2.We define initial statuses
    3. Allow or prohibit certain business transactions.
    Selection profiles are used to select the objects (say production orders) with different status combinations.We assign status profiles to selection profiles in BS42 T-Code.
    Regards,
    Raja.
    Edited by: Rajarao on Oct 30, 2008 6:21 AM
    Edited by: Rajarao on Oct 30, 2008 6:22 AM

  • IDOC confirmation and status change ???

    SAP friends,
    I have a question about IDOCS. We are implementing. In AP after processing payments, our bank will send us a text file which will have idocs number. and status number ( accept and reject).
    We have to update that status number for our idoc in the system and if the number that was rejected we have to send an email to everyone. How can we change the status of idoc using the file the bank sends us.
    Thanks,
    Kavita Reddy

    Hi,
    Please explain the process detaily.  question is not clear.
    IDOCs are the intermediate documents, which carry information from SAP to Legacy or vise versa.
    IDOCs will be distingwished by message type. These will generate by Program.  In program please check about the status.
    Thanks
    Kalyan

  • JEST table and status change document OPL8

    Hi Experts,
    1. I created a prod order and released it and saved. went to AUFK and got the object number to pass in JEST  table. System shows no values found.I was expecting a record for the same. do I need to do something to populate JEST table?
    2. In OPL8 under implementation tab, there is something called status change documents. do I need to configure OCM to use these change documents? if the answer is no, then what is the difference between these change documents and OCM change documents?
    thx in advance

    swathi.rege wrote:
    2. In OPL8 under implementation tab, there is something called status change documents. do I need to configure OCM to use these change documents? if the answer is no, then what is the difference between these change documents and OCM change
    The settings in OPL8 will just determine if system should write the change logs of status to table tables CDHDR and CDPOS (for audit trail). Entries will appear here CO03 >> Header >> Status changes
    I think you opened up different windows of different boxes (DEV, QAS etc) and probably created in production order in DEV and checking status in QAS.
    Edited by: Jeevan Sagar on Feb 12, 2012 10:09 PM

  • BADI CRM_MKTPL and Status Change button! (Hide the standard system status)

    Hello,
    In transaction CRM_MKTPL, i need to delete some status that appears when i click on button Change status.
    I am trying to use the BADI: CRM_MKTPL using the method 'GET_DROPDOWNBOX_VALUE', but i didn't get what i
    want because this method is only valid (i think) for Listboxes for a field and not for a button, that is my
    requirement.
    Also i am trying to use the method 'p_fill_dropdown_listbox', but i don't know how to use this, and where, in
    whick part of the BADI CRM_MKTPL.
    I want to hide the standard system status in the dropdown list.
    Any ideas?
    Thanks in advance
    Best regards
    Message was edited by:
            yukimai maio

    just check in your badi there is any option is there for menu area customization or not in the implementation you can find attribute,interface ,subscreen like tab there check any menu area tab is there or not.. if it is not there then try for any menu exit and lastly you can try for transaction variant tcode SHD0.
    regards
    shiba dutta

  • Expiration of Reward points and status change from elite status how does this happen?

    My rewards point have expired and my elite status has changed. How does this happen?

    Good morning John30csx, and welcome to the Best Buy forum,
    I can understand questioning why your account status may have been downgraded.  To have retained Elite status, you would need to have spent $1500 on eligible BestBuy.com and Best Buy store purchases during the 2013 calendar year.  If you did not spend at least $1500 by 12/31/2013, then your account status would have been downgraded sometime in February.
    From what I can see after looking over your My Best Buy account, you had a $20 certificate that expired in September 2013.  Prior to some program changes that went into effect last year, a certificate would have expired 90 days (180 days for Premier Silver/Elite Plus members) after it was originally issued.  Once a certificate has officially expired, we are unable to issue a new one.
    With that all being said, please feel free to send me a private message if you perhaps have any additional questions about the My Best Buy program or your account.  A private message can be sent by clicking on the blue button located within my signature.
    How to Keep Your Account Active
    Thank you for reaching out to us!
    Derek|Social Media Specialist | Best Buy® Corporate
     Private Message

  • IBASE Create and Status Change

    Hi,
              I need to create an IBASE using the customer number and then set its status to a particular value.
    Can anyone suggest the function module which will dot he job?

    Hi
    Try to use the FM's
    IB_IBASE_CREATE
    IB_IBASE_CREATE_INITIAL
    JIT06_IBASE_COM_CREATE_IBASE
    Thanks!

  • ERec : Send Education Infotype from Employee Profile to eRecrecruiting

    Hello,
    We are planning to use the Employee profile WebDynpro Application HRTMC_EMPLOYEE_PROFILE
    for employees to maintain their background data like education and experience. We are using eRecruiting tool since a long time and we plan to migrate Education data from infotype 5104 to infotype 7404 using the standard migration program RPTMC_TP_SYNC_EDU_WE_RCF.
    Then, our plan is to let employee to maintain education only from  Employee profile and send all update to eRecruiting.  Education data will only appear in display mode in eRecruiting.  Is there any standard ALE interface to send infotype 7404 to 5104 ? If not, is it plan in future released to provide such interface?
    Regards,
    Michaë

    Hi there,
    at the moment you can just copy from e-recruiting to TMC. A back transfer to e-recruiting is not possible.
    Also be aware that this report is just to be meant for an initial copy.
    Therefore you should deactivate education and work experience maintenance in e-rec for internals and read the data just for display in the data overview. Otherwise you need to handle you application data completely separated.
    Best regards
    Sebastian

  • OSA: automatic update of employee profile based on appraisal document

    Hi,
    is it possible that qualifications written in the appraisal document and its evaluation are automatically transferred to the employees profile  and that the level of qualifications there will be updated. If yes, how?
    Thanks a lot.

    Hi,
    this is possible with a correct customizing in the template. In PHAP_cATALOG, select your template and go to tab Processing. In section Follow up processing, you have the possibility to 'Adjust Qualifications (from validity start date on)' or 'Adjust Qualifications (from validity end date on)'.
    Regards,
    Ana

  • Profile picture and status bar don't appear in Game Center

    I first signed up for Game Center when it was released in the days of iOS 4. I used my iPod Touch 2nd gen. There was no status bar or profile picture, but I didn't realize because I was new. I later changed to an iPhone 3GS when iOS 5 was released, and the iPhone was restored to the backup of my iPod Touch. After my iPhone was fully functioning, I retired my iPod Touch. I noticed then that I was missing the profile picture and status bar because my Game Center friends had them. In December 2011, I bought myself an iPad 2 Wi-Fi. Still, no profile picture or status bar. I am confused, because my iPhone and iPad are running the latest version of iOS, 5.1.1. I have done plenty of troubleshooting, with no answer. Please help me.

    Yeah, my internet is on and working too. I have been looking in to this issue- I have emailed Apple to make them aware. It seems like it is affected most, if not ALL tbe Game Centers on 2nd Gen and from what else I've heard, 3rd gen devices too. Whether this is intentional I don't know- it seems odd that everyone has suddenly been disconnected from their games tab on Game Center older devices, so perhaps it is a ploy by Apple to ensure more people switch to a newer device? We'll see. For now, I would recommend you follow the posts I've put up previously too. See my profile for my contributions.
    Thanks, and add me on Game Center if you like.

  • Propose or change automatically, Employee Group and Subgroup.

    Dear all, when executing an exit Action, thru transaction PA40, what's the best way to propose by default/change automatically, the employee group/subgroup?
    Example: I want to change the employee group from '1' (Active) to '2' (Inactive), but the fields are disabled for input.
    Do i have to do this thru the enhancement "PBAS001", or is there any way to do this thru configuration?
    Sincerely,
    Hugo Ferreira

    I was searching for something in SDN and got this post.
    Though it's a very late reply, whatever Sreenu has told is correct.
    In the table T529A, you can define the employment status wehther it has to be active, withdrawn or inactive.
    This field is input disabled in the action and the values will be defaulted from the configuration.
    But Changing the employee group and employee subgroup , we can't change. If that is what is required, the values might depend on the configuration.
    And even through some enhancement also we can't change. because, for IT0000 no enhancement are available. Even though the fields are from IT0001, I doubt it can be changed through enhancemnet.
    If you have already achieved it through enhancemnet, please let us know.
    Thanks,
    RSS.

  • OrgModeler - Employee Profile Telephone and Sec. Phone fields

    Hi experts,
    We're on OrgModeler 3.0 SP2.
    On the employee profile panel, the telephone and sec. phone fields are showing "n/a". Is telephone not being read from infotype 105 subtype 0020?
    Thanks in advance,
    L

    Hi L,
    I assume that you talk about the OrgChart module in OrgModeler (not the Scenario module)?
    This data is returned in the NakisaRFC function SAPPositionIncumbentDetails.xml. It uses the following keywords that can be displayed and changed in the Data Center (ABAP Add-on Keywords).
    <keyword name="EmployeeFaxSubType">
      <value>0005</value>
      <description>Employee Fax Subtype</description>
    </keyword>
    <keyword name="EmployeeCellSubType">
      <value>CELL</value>
      <description>Employee Cell Subtype</description>
    </keyword>
    <keyword name="EmployeeEmailSubType">
      <value>0010</value>
      <description>Employee Email Subtype</description>
    </keyword>
    <keyword name="EmployeeTelephoneSubType">
      <value>0020</value>
      <description>Employee Telephone Subtype</description>
    </keyword>
    If these are correct but you are not getting the information then check the cds.log file to see if there are any errors.
    Best regards,
    Luke

  • Updating User Status and Status Profile for a Project

    Hi,
          I am creating a Project using  BAPI_BUS2001_CREATE.
          which uses a structure  BAPI_BUS2001_NEW for storing details of a New Project.
          It <b>does not have fields for User Status and Status Profile</b> , if any one of you worked on Project Systems, please tell me is there any way to update these 2 fields.
      I have tried lot of FuncModules and BAPIs which deal with PROJECT CHANGE and PROJECT MODIFY but none of them has these 2 fields.
    Please provide me some solution for this.
    Thanks in Advance.

    Hello,
    U need to do like this:
      PERFORM CHANGE_STATUS_CLSD.
    FORM CHANGE_STATUS_CLSD.
      DATA: LR_PROJ LIKE PROJ,
            WA_JEST LIKE JEST,
            LT_PRPS LIKE PRPS OCCURS 0 WITH HEADER LINE,
            LT_JEST LIKE JEST OCCURS 0 WITH HEADER LINE,
            RA_PRPS TYPE RANGE OF POSID WITH HEADER LINE.
      CLEAR: LR_PROJ.
      SELECT SINGLE * FROM PROJ INTO LR_PROJ WHERE PSPID = SP_PSPID.
      IF SY-SUBRC = 0.
        SELECT * FROM JEST INTO TABLE LT_JEST WHERE OBJNR = LR_PROJ-OBJNR.
        LOOP AT LT_JEST INTO JEST.
          IF JEST-STAT = 'I0001' OR JEST-STAT = 'I0002'.
            JEST-INACT = 'X'.
            UPDATE JEST.
          ELSE.
            JEST-INACT = SPACE.
            UPDATE JEST.
          ENDIF.
        ENDLOOP.
        CLEAR: LT_JEST.
        REFRESH: LT_JEST.
        SELECT * FROM PRPS INTO TABLE LT_PRPS WHERE PSPHI = LR_PROJ-PSPNR.
        IF SY-SUBRC = 0.
          SELECT * FROM JEST INTO TABLE LT_JEST FOR ALL ENTRIES IN LT_PRPS
                                                WHERE OBJNR = LT_PRPS-OBJNR.
          LOOP AT LT_JEST INTO JEST.
            IF JEST-STAT = 'I0001' OR JEST-STAT = 'I0002'.
              JEST-INACT = 'X'.
              UPDATE JEST.
            ELSE.
              JEST-INACT = SPACE.
              UPDATE JEST.
            ENDIF.
          ENDLOOP.
        ENDIF.
        LOOP AT LT_PRPS.
          CLEAR WA_JEST.
          SELECT SINGLE * FROM JEST WHERE OBJNR = LT_PRPS-OBJNR
                                      AND  STAT = 'I0046'.
          IF SY-SUBRC NE 0.
            WA_JEST-MANDT = SY-MANDT.
            WA_JEST-OBJNR = LT_PRPS-OBJNR.
            WA_JEST-STAT = 'I0046'.
            WA_JEST-INACT = ' '.
            WA_JEST-CHGNR = '001'.
            INSERT INTO JEST VALUES WA_JEST.
          ENDIF.
        ENDLOOP.
        COMMIT WORK AND WAIT.
      ENDIF.
    ENDFORM.                    " CHANGE_STATUS_CLSD
    REagrds,
    Vasanth

  • Status and status profile?

    Hi,
    I have learned how to setup Status and status profile in IMG.
    who can give me the detailed presentations of its usage in S/O or other transactions?
    If I changed the system status,  for example I put the button 'put in process' in notification, the system status is changed from 'OSNO' to 'NOPR',  what effects it would be for the next?
    TKS in advance.

    Hi,
    But you have not changed the system status physically, you just clicked the "put in process button" in the notification, it changed the status to "NOPR".
    User statuses enable you to further limit the functions that are permitted for a notification due to a system status. You can assign and delete user statuses directly if you have the authorization for doing this. User statuses are defined within a status profile for notifications in Customizing for Plant Maintenance and Customer Service.
    System statuses are preset by SAP and cannot be changed.
    User statuses are defined by the system administrator within a status profile for notifications in Customizing for Plant Maintenance and Customer Service.
    If you need documentation regarding this, please give your mail ID, I will forward it.
    Prase

Maybe you are looking for