Employee Task Sheet Issue

Dear Experts,
Is there any way through which we can maintain daily employee task sheet? This task sheet will contain details like, Personnel Number, Date of task, title of task, date of completion of task etc. Is this scenario possible through SAP HCM or any other SAP module?
Thanks and Regards,
Bhagyashree

Hello
Infotype 19 "Monitoring of Task"
https://help.sap.com/saphelp_46c/helpdata/en/7e/5e04d34a1611d1894c0000e829fbbd/content.htm
regards
Hadrien

Similar Messages

VBA Employee Task Tracker-Need help

I am trying to design an employee task tracker. We have to start accounting for all activity, including projects, time spent away from the office and vacation time. There are about 20 employees that will be using this tracker, to be viewed and charted
by a supervisor. I am using Excel and a VBA userform, but it is slow going seeing as how I have only used this for a few other projects, and am a novice. Is there something out there that already exists that might aid me? Thanks--Cassie

Hi cgr425,
>> but it is slow going seeing as how I have only used this for a few other projects, and am a novice.
Do you mean that your excel project work slowly? In my option, there are many reasons for Excel performance issues. For example, it has a relationship with computer hardware and the system environment. Could you share us when the Excel file run slowly, a
specific method or a specific operation?
It would be helpful if you could share us more information about your issue.
For a general suggestion, I will recommend you upgrade your computer hardware. For speed up by editing the vba code, you could refer the link eblow:
# Excel VBA Performance Coding Best Practices
http://blogs.office.com/2009/03/12/excel-vba-performance-coding-best-practices/
Hope it will help.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I'm a Former Verizon Wireless Employee with Billing Issues the Ruined My Life

>>Duplicate post removed to comply with the Verizon Wireless Terms of Service.
See I'm a Former Verizon Wireless Employee with Billing Issues That Ruined My Life<<
Message was edited by: Verizon Moderator

Sorry to hear about your collections mishap, just keep in mind this is a peer to peer forum for customers and you likely will not receive the help you are looking for from Verizon.
Now you say that the account went to collections and you have paid it. So at this point I am not sure what you can negotiate anymore. I've read that if you have something in collections and tell the collecting company that you will pay them if they remove the negative mark from your credit, they will negotiate it with you.
In this situation, if things are as you say and you did not receive the final bill at the correct address, then you may have an argument to take to the credit bureaus. I would file a report with the credit bureaus and see where that takes me, also once your account goes to collections to my knowledge it doesn't have anything to do with Verizon anymore. The debt is between you and the collections company. I would try to contact them and see if you can somehow negotiate having the collection removed from your credit report seeing as the debt has been settled and the bill was never sent to your correct address.
I haven't really ever dealt with an account in collections, so this is just some helpful information I have thought of, if anything is not accurate in how you can deal with this, I apologize.

Essbase Spread Sheet Issue

Hi,
I have one issue in my spread sheet addin. I have update outline of my Essbase BSO cube and load data in to it. There was no error while updating and loading data, but when I connect my cube with excel spread sheet through essbase addins, then I am not able to see the updation.
Whereas if I connect the same cube through smart view, I can see the updated cube and also access cube.
Why it is happening and how to correct it?
Thanks

Or is the issue that the OP has two instances of Excel running?
Actually I can access same cube but I is showing previous data and outline not the updated one. And other excel instance is ruing. ^^^Multiple weirdness is a known side effect of the add-in and more than one instance of Excel. Can you confirm that you only have one instance of EXCEL.EXE running in Task Manager? Alternatively, reboot your client and try again.
Regards,
Cameron Lackpour

Time sheet issues

Here is the scenario-
I have integrated project server with TFS. Assume a project test has a task/user story. In project server, i have assigned a user X with 50% availability to user story1 and this user story runs for 2 days. So the estimated effort is 8 hours, with 4 hours
each day. Now i publish this project and go to TFS and find the same user story assigned to the same user. Great!
I now go ahead and enter the estimated hours as 8 and the remaining hours as 8. The user X goes in on day1, and in TFS enters Completed hours as 5, remaining 1 and saves the work item. Now, here is the issue. The user goes into project server, goes to his
time sheet, finds the user story1 assigned to him on day1, clicks the check box and selects import task progress. Miraculously, project server assumes that the resource X has spent 4 hours on day1 for user story1 and 1 hour on day 2. While in reality, he has
spent 5 hours on user story1 and nothing on day 2!!!!
How do we solve this problem!! Any help urgently would be appreciated!!

Any help from microsoft on this one????!!!

KM Scheduler Task Cache issue

We have created couple of custom schedulers in Enterprise Portal. These schedulers are worked fine in our QA and DEV environment. But when we move the same transport to Production the scheduleru2019s tasks are not showing up in KM scheduler list. But after restarting J2EE couple of times it's showing up in KM scheduler task. This is the behavior we are seeing whenever we move the scheduler to production.
Here are the some technical details about the scheduler,
We have created one Portal Development component and 10 Scheduler Tasks under this component. All the tasks are not created in a single release. Initially when we develop we used to have 2 scheduler tasks under this component, when we move this transport to production we didn't faced any issue. Even after adding 4 to 5 scheduler task we didn't had any issues. After adding more than 6 to 7 whenever we add one we are getting the same issue.
Question: 1 - Is there any limit to for adding Scheduler task in one Portal Component?
This time we have restarted our server more than 5 times but scheduler not showed up. We ask our manger to logon to the portal server who never navigated to KM screen, we ask her to navigate and she did. For her schedulers are showed up. After she navigated to the KM screen everybody is able to see the scheduler. This is not the first time it happens like this, the same situation happen for the previous release also. In previous release we ask our Technical Architect to login to see KM schedulers. After his login everybody is able to see the schedulers.
After doing all these is what I obverse is, it seems KM scheduler has some server level cache for the user and it's giving old screen whenever we are trying to login and see. After the transport, the cache is not getting updated with the new version.
We guess it might be something we need to do with cache.
Is there any idea why the system is behaving like this.

Hi,
I am facing similar issue. How did you resolve it?
Regards,
Apurva

I want to use iCloud to give my employees tasks

I need to give my employee a task while they are out of the office.
I was thinking I could use icloud to put events in the calender with phone numbers from address book.
Can you link ical with address book by adding contacts to ical in an event?
Am I making sense here?
If ical can't is there an app that does?
Thanks

I suppose you could add invitees to an appointment and not send the invitation, iCal can pull up the contact card from the address book by clicking on an invitee.
You might also consider using bento which integrates very well with address book and has a iCal task manager

Service Entry sheet Issue

Dear all,
I am facing a problem for long in maintaining Service Entry Sheet.
After entering my PO number in the transaction ML81N, i have selected "Service Selection" Tab.Then selected adopt full quantity,all the line items appeared in "Select services as reference" screen.Then selected the 1st line item which is having a quantity of 1 pc, and selected "Services" tab.Immidietly doing this step,system is givinng an error message "Quantity entered 2.00 exceeds quantity 1.00 in Purchase order".I don't understand why system is giving this message even though the quantity in PO is 1 pc.
Also,while creating Service PO,should i select both GR based as well as Service based IV or only Service based?
Kindly help me as early as possible.
Thanks & regards,

Hi,
After entering my PO number in the transaction ML81N, i have selected "Service Selection" Tab.Then selected adopt full quantity,all the line items appeared in "Select services as reference" screen.
Solution:
Now the system copied all the line item in Service PO along with Qty.
if again select the line item and then select the Service Icon .. means assume like u are coping the line item again.
SO, The system issuing the Error message.
SAM

Employee Vendor Address Issue

Hello Guys,
We have issue with Employee vendor. We send employees as vendor to some non-HCM systems. When we are sending one of the employee vendor from HCM system to non HCM system. It sends vendor data and throws iDoc error which is from Function module ADDR_POSTAL_CODE_CHECK.
It is creating address with one extra entry in POST_CODE2 field. So IDoc is getting failed. Can someone help here? Not sure from where it is creating that extra entry?
Thanks!

Hi Sieg,
Thanks for your reply.
Company has given Forex advance to employee via third party vendor
So, We need to debit the amount into Employee Vendor and Credit into Third Party Vendor
For Ex: Third Party Vendor is Thomas Cook (Forex Provider)
Please guide me how to post the above entry in Standard.
Regards
Shaik

EPM Formatting Sheet Issue - Right click on the cell and lock the cell

Dear Experts,
I have come across an issue. Earlier I worked on BPC NW 10 integrated with Ms Excel 2007. I applied a feature of locking the cell linked with specific member in Input Template and Report by going to EPM Formatting Sheet, selecting dimension member (Which I want to lock in Input Sheet and Report), right clicking on the cell under Data Column and selecting the option "Lock the Cell". As I protect my Input sheet and Report, and do refresh, the cell linked with specific dimension member get locked. Hope everyone has used this feature.
Now I have Ms Excel 2013 installed in system. I am not able to find this feature. if anyone has tried this feature in BPC NW 10 with Ms Excel 2013. Please help me out. As this was good feature by BPC.
Regards,
David

Hi Andy,
I am using Excel 2013, When I checked, I did not find "Lock Option". When I was using Excel 2007, then I had this locking option. below are the details that you asked for...
When I right click on cell in EPM formatting sheet, I get options as shown below in screen shot, but there is no "Lock Option"
Regards,
David

Style sheet issue

Hi Friends,
I want to Broadcast a webtemplate by Email.. I used Independent HTML output functions... it didnot work properly.. that means it worked separately without combined the style sheets.. and I used the Style sheets coding directly in the HTML tag, it worked correctly... I could not know why it was happened....
that means a reference link did not work, the coding where in the reference link's path is worked well...
now I need how to broadcast the webtemplate by Email using the reference link
<link href="/sap/bw/Mime/BEx/StyleSheets/Chrome_BWReports_ie6.css" rel="stylesheet" type="text/css"/>
guide and help me....
Thanks in Advance,
Jaya

Hi,
Since you are planning to send it via email, I would suggest that you use the full URL. Please note that the one you have used is a Relative URL path.
<link href="/sap/bw/Mime/BEx/StyleSheets/Chrome_BWReports_ie6.css" rel="stylesheet" type="text/css"/>
Full URL path will look something like
<link href="http://mySAPServer.com/sap/bw/Mime/BEx/StyleSheets/Chrome_BWReports_ie6.css" rel="stylesheet" type="text/css"/>
where mySAPServer.com is your SAP Web Server address.
Also the path might be case sensitive. So take care of that.
Using the full URL path will solve your problem.
Only issue is that, if you are using full URL, you have to update the server address in your templates in Dev/Qual/Prod to reflect the correct web server address
Regards
Anujit Ghosh

Inspection with Task List Issue

Hi Gurus,
I have a situation where I am creating a "shell" Material. We are taking samples of Blood and just throwing them away. We don't need to have Inventory on them or costing. I just want to use the QM module to keep the inspection results/data.
I had my Materials team set up a Material with only the Basic Data 1&2 views and the QM view. I want to use Physical Samples to keep track of how many samples we inspect.
My issue is... I tried to Inspect with a Task List and it is "Greyed" out on the Material Master. It will not let me select it. I am using the inspection type 15 (Physical Sample).
Can someone PLEASE help me get this Task List check box not grey?
Thanks so much

This field should be defaulted in from configuration. Change the defaut vales for inspection type 15 in configuration.
I think someone, at some point, changed this config in your system as I believe this is delivered by SAP as defaulted for inspection type 15.
You might try using mass transation QA08 to set this for any materials you have already set up after changing the config.
FF

How to fix Task form issue which is not opening in browser?

Hi All,
When trying to open task form link which is in email, facing:
How to fix this issue? thanks in advance!

Paul,
My scenario is: Having a team site and a sub-site. In sub-site, created on list form associated with designer workflow which will assign approval task to a person who are not a member of this sub-site but member of team-site.
Before assign task, assign permission to that person using impersonation step like:
Add Approve to item in Current Item
Add Approve to item in Association: Task List
When click the task link which receive in email, that person facing above issue. After I add that person in sub-site site viewer group, then it working perfectly.
My question is, is it possible to give approve permission to task list by designer workflow to a person who are not a member of a sub-site?

Task Reassignment Issue in OIM9.

Guys,
When I am reassign a task to some user , its not triggering any email in my QA Env , but its working fine in Dev Env.
Also , I need to check user @time of reassignment , i have some criterion for reassignment. how do i deifne that criterion for user selection @time of reassignment.
Thanks.

Guys,
Need you help on above issue.
Thanks

Human Task expiration issue

Hi,
I have the following scenario.
Its a simple BPEL process with string input and string output with a call to Human Task.
the Human Task has the expiration duration of 5 mins.
I invoke the process from bpel console and as expected it waits for the human task to respond or expire. during this waiting time I happen to restart the soa server. The server was restarted before the expiration time but still the task did not expire.
Task still stays with the user assigned and the process is still waiting for the response from the task(which is already passed expire time).
I am using SOA Suite *10.1.3.4* with a patch set *7714967* applied on top of it.
I have tried to set the startup recovery also but no help.
If some body can give me the solution. that would be great.

I have tried with MLR Patch # 8372150, but no luck. I have found a similar thread on this forum who has the same issue.
quartz based workflow times are not initializing
If this might be the problem, how do we fix the following error message.
*<::> Unable to get the workflow timers during startup, this can happen if orabpel server is not started properly*

Employee Task Sheet Issue

Similar Messages

Maybe you are looking for