Employee user not able to access catalogs from EBP

Hello Seniors,
We are implementing SRM 4.0 with scenario SSP and CCM 2.0.
Please note the landscape highlights:
EBP and CCM component are mounted in the same client and same server.
CAT and CES are also on same client.
No XI in picture.
Catalog upload has been done through CSV format only.
Please note the activities I have completed:
Cat_Manager assigned to /CCM/CATALOG_MANAGER role and profile generated.
Did the customizing for CAT
Did the customizing for CSE
Activated the required services
For the service srm_cse set the log on procedure as "log on data required".
Maintained a service user "ccm_user" in anonymous log on data.
Maintained "define external web serices" in SRM img->SRM ->SRM server ->Master data (Here i have a doubt which is explained later)
Intialized CCM with report.
Uploaded schema in the master catalog.
Created supplier ID and catalog.
Uploaded CSV file for Supplier catalog.
Mapped Supplier catalog with master catalog
Published Master cataog.
maintained entry of master catalog in PPOMA_BBP.
Now I logged on EBP home page with employee user.
Went to application shop.
My master catalog published in CCM component was present there with exact name.
But when the employee user clicks on the particular catalog link to choose the items from , He is getting an error "" BSP exception: Access to URL /sap/bc/bsp/ccm/srm_cse is forbidden "".
With this error message immediately the attention goes to the service srm_cse.But there I have maintained a SERVICE user by user ID ccm_user which is existing in SRM SU01.
In the whole customizing explained above I have two weak points which I want to state now:
1. The integrated call structure for my particular master catalog was copied from other catalog.
There i am missing one sr. no. of 70 (ie after 60 , 80 is there).
But all the values for url, ccm-user, password, sap-client, sap language, locale, catalogID are filled correctly with type as per config guide.
Do the parameter names should come exactly as per sequence given in guide(In my case it's not so.)
(If anybody wants to see screenshot for this point pl. give me personal ID.)
2. I had deleted the entry of my particular master catalog from the external web services to correct the error stated in pt. no 1 .
But when i tried to create an entry again with the same ID system gave me an error saying that the said catalog is marked for deletion.
now entry of this particular master catalog is present in table /CCM/D_CTLG_REQ with no x mark in active column.
But my catalog ID is present in external web services.
Can point no. 1 and 2 are reasons of the failure to access the catalogs from EBP?
If it is so then please tell me the procedure to recreate the integrated call structure with same catalog ID.
Please excuse me for the length of the matter , but i have tried to give every relavant detail so that clarity should be max.
Best Regards,
dinesh
[email protected]

Hi Dinesh,
Please see cooments below...
1. The integrated call structure for my particular master catalog was copied from other catalog.
There i am missing one sr. no. of 70 (ie after 60 , 80 is there).
But all the values for url[Adeoye]where did you get your url from? Go to SE80 --> BSP application --> /CCM/SRM_CSE --> Controller -->main.do and check the url, ccm-user, password, sap-client, sap language, locale, catalogID are filled correctly with type as per config guide.
Do the parameter names should come exactly as per sequence given in guide(In my case it's not so.)[Adeoye] Yes i believe this should be in the satated sequence.
(If anybody wants to see screenshot for this point pl. give me personal ID.)
2. I had deleted the entry of my particular master catalog from the external web services to correct the error stated in pt. no 1 .
But when i tried to create an entry again with the same ID system gave me an error saying that the said catalog is marked for deletion. [Adeoye] Save your deletion first, before trying to create it again.
now entry of this particular master catalog is present in table /CCM/D_CTLG_REQ with no x mark in active column.
But my catalog ID is present in external web services.
I also sent you a cookbook to help with this, hope this helps...
BR,
Adeoye

Similar Messages

WHCK - Not able to access Server from client machine

Hi,
Server is running in : \\testserver
Domain : ns.local
Client : testclient
Test Name : TDI filters and LSPs are not allowed
When the above test is run from the server side, Test fails with the following error:
Cause : Failed to Start the Task
Cause : Zero files are copied when Trying to Copy From Path "\\testserver.ns.local\TaefBinaries\x64"....Failing the Task
Failure : Failed to Start the Task "Copy TAEF Binaries"
Cause : Failed to Copy File : "\\testserver.ns.local\TaefBinaries\x64" Dest : "C:\WLK\JobsWorkingDir\Tasks\WTTJobRun6A2E5AF3-8C3E-4425-9997-5B809CAC2BB1\"
Cause : Cannot Find Pattern "\\testserver.ns.local\TaefBinaries\x64"
From WttEa.log , it displays "The network path was not found".
CRunManager::ExecutionAgent: Working Dir C:\WLK\JobsWorkingDir\JobRuns\WTTJobRun6A2E5AF3-8C3E-4425-9997-5B809CAC2BB1
CRunManager::ExecutionAgent: Saving RunXML to file C:\WLK\JobsWorkingDir\JobRuns\WTTJobRun6A2E5AF3-8C3E-4425-9997-5B809CAC2BB1\WttJobRun.Xml
CRunManager::ExecutionAgent: Saving EaDataXML to file C:\WLK\JobsWorkingDir\JobRuns\WTTJobRun6A2E5AF3-8C3E-4425-9997-5B809CAC2BB1\WttEaData.Xml
CRunManager::UserName : DTMShareUser
CRunManager::Domain : TESTSERVER
CRunManager::Password : Server2008,WTT5326ShareUser
Build No Greater than 4000. This is a Windows Vista Machine
Single User TS Enabled
Comparing TESTSERVER testclient.ns.local 10
Logon Netonly
GetUserToken : Returns 0
Error: 0x35, The network path was not found. WTTCreateDirPAth : CreateDirectory \\testserver.ns.local\HCKLogs\EaFolderAccessCheck\CF82A2A5-E08D-49C7-A078-4BA1416F1AA1 Failed File=d:\wtt25\wtt25\sdktools\wtt\jobs\runtime\wttexecutionagent\common\eautil\src\eautil.cpp
Line=1589
Error: 0x80070035, The network path was not found. (Error ( status = 53 ) in call: WttCreateDirPath(lpszTemp) ) File=d:\wtt25\wtt25\sdktools\wtt\jobs\runtime\wttexecutionagent\eamanager\runmanager\src\runmanager.cpp Line=2232
Retrying the log location creation 10 more times
Error: 0x35, The network path was not found. WTTCreateDirPAth : CreateDirectory \\testserver.ns.local\HCKLogs\EaFolderAccessCheck\CF82A2A5-E08D-49C7-A078-4BA1416F1AA1 Failed File=d:\wtt25\wtt25\sdktools\wtt\jobs\runtime\wttexecutionagent\common\eautil\src\eautil.cpp
Line=1589
Error: 0x80070035, The network path was not found. (Error ( status = 53 ) in call: WttCreateDirPath(lpszTemp) ) File=d:\wtt25\wtt25\sdktools\wtt\jobs\runtime\wttexecutionagent\eamanager\runmanager\src\runmanager.cpp Line=2240
What could be the problem ??? What steps need to be done or checked further to proceed ??
Could you please help why the client is not able to access Server ???
Thanks.
Regards,
Pradeep VR

Hi,
Reason for this failure is that the test executable is not present in the HLK controller.
It looks like a Microsoft issue. We have faced same type of problem for other tests also. Our problem gets fixed in HLK 10056.
If you face the problem in current build also, then please log a bug to Microsoft.
Thanks,
Arpo

Could not able to access workbook from the favorites of User Menu

Hi all,
I have got a problem in accessing Workbook from the User menu (SAP GUI) Favorites.
I added a workbook to my favorites but now when i double click on the Workbook from my USER MENU (SAP GUI),
BEX is opening and the connection is also maintained but the workbook is not appearing in the BEX.
I checked in SU53 and this is not related to any authorization issues.
Could anyone help me in solving this issue and
providing ?

I can't aunderstand why it happens, but try adding the workbook to a role and assign the role to your user.
Hope it helps.
Regards

Urgent Help needed - Users not able to access webdynpro application in VPN

Dear Team,
I've deployed WD application in Portal. users who are in intranet are able to access but users who are accessing through VP, internet and ODC's are getting 404 error not found issue.
Please help me.
Best Regards,
Prasad P.M.V

Issue is with reverse proxy i was able to resolve

I am not able to access Itunes from I movie

I cant see or access I tunes from I movie. Nor I photo. I am not able to add music or photos to my movie. What can be happening?

Temporarily disable any security software on the computer and try again.
If it works, contact whomever supports the security software for assistance on configuring it to not interfere with iTunes.

Not able to access files from Workspace Images and Static files

Hi,
We have just migrated our APEX Application from one server to another.
All the functionality is working fine except the images or files which we are uploading
in
Shared Components -> Static Files
Shared Components -> Images
We are uloading Images in Shared Components -> Images but those are not getting displayed there.
Similarly the files which we are uploaded in Shared Components -> Static Files are not accessible. If we
try to download using download icon its showing blank screen.
I am using some javascript files which i have uploaded into static files, but not able to refer them in page.
Please someone guide us how to resolve the above problem.
Thanks in advance.
Thanks & Regards
Sanjay
Edited by: user11204334 on May 25, 2010 1:35 AM
Edited by: user11204334 on May 25, 2010 3:45 AM

Hello Sanjay,
If you upload any static files such as IMAGES, FILES, or CSS you have to use the tags: #WORKSPACE_IMAGES# or #IMAGE_PREFIX# depending on your files location..
then try something like htp.p ('<img src="#IMAGE_PREFIX#fileName.gif" />');
And it should show the fileName.gif on your browser...
I am not sure if i remember correctly, you can reference files to a specific application or to the whole application, if I am not mistaken..Correct me..
Regards,
Noel Alex Makumuli,
Tanzania

Not able to access HTMLDB from another server running HTTP_SERVER

Hi
I had htmldb installed and running from dataabse server but then I moved APACHE server to another server. Here Apache is running from OEM 10g grid control
I set up dad.conf and marvel.conf files for connection to htmldb server. Also I created marvel directory and copied images diretory from htmldb server to this Apache server marver directory. It did not work
Here' the details from dads.conf file
Alias /i/ "/opt/oracle/product/10.2.0_oem/oms10g/Apache/marvel/images/"
<Location /pls/htmldb>
SetHandler pls_handler
Order allow,deny
Allow from All
AllowOverride None
PlsqlDatabaseUsername htmldb_public_user
PlsqlDatabasePassword @BfNvzBYH8alwoDCIEVVlTPg=
PlsqlDatabaseConnectString ods1_dev.whq.ual.com TNSFormat
PlsqlNLSLanguage AMERICAN_AMERICA.WE8ISO8859P1
PlsqlAuthenticationMode Basic
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDocumentPath docs
PlsqlDocumentProcedure wwv_flow_file_manager.process_download
PlsqlPathAliasProcedure htmldb.wwpth_api_alias.process_download
PlsqlDefaultPage htmldb
</Location>
Also I see following errors in Apache Log
File does not exist : /opt/oracle/product/10.2.0_oem/oms10g/Apache/Apache/htdocs/portal/pls/htmldb
Please help.
Thanks
Sunil

In httpd.conf I have oracle_apache.conf file included
In oracle_apche.conf I have <oracle home>/Apache/modplsql/conf/plsql.conf included
And in plsql.conf I have
<oracle home>/Apache/modplsql/conf/dads.conf file included.
http_server is running and did not give any errors during startup

Not able to access schema from a Web Server

I am not successful in using a schema from a web server. I am using j2sdk1.4.2_06, and JDOM-b10. I have been successful in accessing schema using a file path, but not with a web address. The server is Windows Server 2003, I create a virtual directory using IIS under Inetpub.
Let the URL be: http://server/research_schema/client.xsd
This would be accessible only on the intranet.
Here is some XML:
<client xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
 xsi:noNamespaceSchemaLocation="http://server/research_schema/client.xsd">
<execute matlab="false" commit="false" return_server_msg="false">
<t1>
<load_batch_data>
<username>test</username>
<password>test</password>
<database>db</database>
<get_next_batch>true</get_next_batch>
</load_batch_data>
</t1>
</execute>
</client>
Here is the code that sets the parser to be validating, and sets the schema location, I am using JDOM:
builder = new SAXBuilder("org.apache.xerces.parsers.SAXParser", true);
builder.setFeature(
"http://apache.org/xml/features/validation/schema",
true);
builder.setProperty(
 "http://apache.org/xml/properties/schema/external-noNamespaceSchemaLocation",
 "http://server/research_schema/client.xsd");
doc = builder.build(source);The error I get is a JDOMException saying the client element is not found, but I know that the client element is there, after seeing the XML output to
a file from the sender.
I see many exmples on the internet using a URL for the schema location, and it is usually the internet and not just the intranet. So it does work for someone.
I'd appreaciate any help.

Steve, et. al.,
My apologies for using this in lieu of email, but I have been searching and searching for the answer to your questions from last summer concerning the correct method for getting the local xsd file to be correctly accessed from the xml file when using JDOM to parse with validation..
I did not see successful resolution of the thread from last summer, but this one seems closely related and suggests that you were either instructed to give up, or gave up on your own and went to the solution of placing the xsd file on a server.
Maybe I've got my head screwed on wrong, but I, like you, would like to find a successful way to make xml processing work for a JWS-provisioned application the same as it would if I just sent the clients a big jar file and told them to unjar it to some convenient local directory. In that scenario xsi:noNamespaceSchemaLocation = "itsrighthere.xsd" works as expected.
Can anyone tell us what the correct method of specification is in the JWS context?
Thank you.

Not able to access database from a remote machine using SQL Server Management Studio

Hi,
I have a DB_BOX with SQL Server 2008 R2 installed. I can access the databases on the local machine using SQL Server Management Studio but it is not accessible from other machines, though the machines are in same domain.
I have remote enabled on SQL Server box, TCP enabled, firewall off. I checked with IP Address too, all SQL Server services are running.
The SQL Server log shows the message
The requested service has been stopped or disabled and is unavailable at this time. The connection has been closed.
I get the below message in SSMS from remote machine.
Details of error message are
===================================
Cannot connect to DB_BOX.
===================================
A connection was successfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error: 0 - The specified network name is no longer available.) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=64&LinkId=20476
Server Name: DB_BOX
Error Number: 64
Severity: 20
State: 0
Program Location:
   at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
   at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error)
   at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj)
   at System.Data.SqlClient.TdsParserStateObject.ReadNetworkPacket()
   at System.Data.SqlClient.TdsParserStateObject.ReadBuffer()
   at System.Data.SqlClient.TdsParserStateObject.ReadByte()
   at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
   at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
   at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
   at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
   at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
   at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
   at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
   at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
   at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
   at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
   at System.Data.SqlClient.SqlConnection.Open()
   at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
   at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()

Sorry, missed the message from the errorlog in the original post. You shouldn't have included that big .Net dump that hid the important facts. :-)
My first Google attempt on that message (which I have never seen before) suggests that the TCP Enpoint is stopped, so try this:
ALTER ENDPOINT [TSQL Default TCP]
STATE=STARTED;
Erland Sommarskog, SQL Server MVP, [email protected]
This solves the problem. Thanks...

Limited account users not able to access oracle 9.2 database

I have installed oracle 9.2 database on windows server 2003 enterprise, I am having 35 users that login through terminal server to use a application developed in VB6 and uses oracle database, Now if I put all users in administrator group of 2003 everything is working OK , but if I remove them from administrator group they receive the following error after starting the application
"Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed."
I dont want these users in administrator group as this can be a risk for my setup,but unfortunately I until have no solution for this rahter then keeping them in Administator group.
Any Help will be greatly appreciated.
Tahnks

On the client terminals, you need to install Oralce client software to make sure that the clients and server can communicate. Have you installed it? How the clients are connecting to the database, by some tnsnames or in your application, are you using some DSN or something which is using some tnsnames entry?
HTH
Aman....

Users are not able to access two different SAP portals at a time

Hi Experts,
Users are not able to access two different SAP portals at a time, if users login the OLD SAP Portal then they are not able to access NEW SAP Production Portal asking user id's & Password while doing ECC & APO transactions.
If user clear the Internet Explorer cache then for time being they can access but its not the permanant solution.
Can any one please help me on this.
Thanks,
Jay

Hello Jay,
here we are facing this problem, this company users not able to access both the portals at at time
If you want to access HTC and Armed at the same time you gotta complete SSO Config or User mapping between these two Portals. You can refer to the below link for more details.
http://help.sap.com/saphelp_nw04/helpdata/en/f8/3b514ca29011d5bdeb006094191908/content.htm
Thanks
SM

Not able to access javaFx charts from a remote system after using ext. jars

We are facing following issue. Any recommendations to resolve these issues are highly appreciated.
1. Not able to access javaFx charts from a remote system (More details at the end of mail).This is high priority requirement as we have a web based reporting application and users access it over our static IP address.
We are using Java Fx charts in our web application where we built jnlp and jar files in a separate fx project and kept jar and jnlps inside our web project.
It is working fine when we did not used any external jar files and remotely it is accessible. But when we used external jars our project is running on local
system but remotely it is not working due to some path settings. We modified jnlp files where entry of jar files exists and modified the jar path as per our
project. But still it did not work.
Before using external jars inside our java fx project my jnlp looks like:
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="http://localhost:8083/servlet/org.netbeans.modules.javafx.project.JnlpDownloadServlet/F%3A/New+FX+Projects+08-12-
2009/JavaFXApplication3/dist/" href="JavaFXApplication3.jnlp">
<information>
<title>JavaFXApplication3</title>
<vendor>Saurabh</vendor>
<homepage href="http://localhost:8083/servlet/org.netbeans.modules.javafx.project.JnlpDownloadServlet/F%3A/New+FX+Projects+08-12-
2009/JavaFXApplication3/dist/"/>
<description>JavaFXApplication3</description>
<offline-allowed/>
<shortcut>
<desktop/>
</shortcut>
</information>
<resources>
<j2se version="1.5+"/>
<extension name="JavaFX Runtime" href="http://dl.javafx.com/1.2/javafx-rt.jnlp"/>
<jar href="JavaFXApplication3.jar" main="true"/>
</resources>
<application-desc main-class="com.sun.javafx.runtime.main.Main">
<argument>MainJavaFXScript=misc.Test</argument>
</application-desc>
<update check="background">
</jnlp>
After modifying my jnlp as per my project as
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="/PiFx/FxFiles/" href="JavaFXApplication3_browser.jnlp">
<information>
<title>JavaFXApplication3</title>
<vendor>Saurabh</vendor>
<homepage href="/PiFx/FxFiles/"/>
<description>JavaFXApplication3</description>
<offline-allowed/>
<shortcut>
<desktop/>
</shortcut>
</information>
<resources>
<j2se version="1.5+"/>
<extension name="JavaFX Runtime" href="/PiFx/FxFiles/javafx-rt.jnlp"/>
<jar href="/PiFx/FxFiles/JavaFXApplication3.jar" main="true"/>
</resources>
<applet-desc name="JavaFXApplication3" main-class="com.sun.javafx.runtime.adapter.Applet" width="500" height="500">
<param name="MainJavaFXScript" value="misc.MyChart">
</applet-desc>
<update check="background">
</jnlp>
After adding external jars my jnlp looks like this :
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="http://localhost:8083/servlet/org.netbeans.modules.javafx.project.JnlpDownloadServlet/F%3A/New+FX+Projects+08-12-
2009/JavaFXApplication3/dist/" href="JavaFXApplication3.jnlp">
<information>
<title>JavaFXApplication3</title>
<vendor>Saurabh</vendor>
<homepage href="http://localhost:8083/servlet/org.netbeans.modules.javafx.project.JnlpDownloadServlet/F%3A/New+FX+Projects+08-12-
2009/JavaFXApplication3/dist/"/>
<description>JavaFXApplication3</description>
<offline-allowed/>
<shortcut>
<desktop/>
</shortcut>
</information>
<resources>
<j2se version="1.5+"/>
<extension name="JavaFX Runtime" href="http://dl.javafx.com/1.2/javafx-rt.jnlp"/>
<jar href="JavaFXApplication3.jar" main="true"/>
<jar href="lib/jdom.jar"/>
</resources>
<application-desc main-class="com.sun.javafx.runtime.main.Main">
<argument>MainJavaFXScript=misc.Test</argument>
</application-desc>
<update check="background">
</jnlp>
I have modified the jnlp as per my project :
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="/PiFx/FxFiles/" href="JavaFXApplication3_browser.jnlp">
<information>
<title>JavaFXApplication3</title>
<vendor>Saurabh</vendor>
<homepage href="/PiFx/FxFiles/"/>
<description>JavaFXApplication3</description>
<offline-allowed/>
<shortcut>
<desktop/>
</shortcut>
</information>
<resources>
<j2se version="1.5+"/>
<extension name="JavaFX Runtime" href="/PiFx/FxFiles/javafx-rt.jnlp"/>
<jar href="/PiFx/FxFiles/JavaFXApplication3.jar" main="true"/>
<jar href="/PiFx/FxFiles/lib/jdom.jar"/>
</resources>
<applet-desc name="JavaFXApplication3" main-class="com.sun.javafx.runtime.adapter.Applet" width="500" height="500">
<param name="MainJavaFXScript" value="misc.MyChart">
</applet-desc>
<update check="background">
</jnlp>
where PiFx is our project Name

We have tried few things given in thread : http://forums.sun.com/thread.jspa?threadID=5401999
Now it is not able to get the external jar file only
exception: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar.
java.io.IOException: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar
 at com.sun.deploy.net.DownloadEngine.getCachedResourceFilePath(Unknown Source)
 at com.sun.javaws.LaunchDownload.getSignedJNLPFile(Unknown Source)
 at com.sun.javaws.LaunchDownload.checkSignedLaunchDescHelper(Unknown Source)
 at com.sun.javaws.LaunchDownload.checkSignedLaunchDesc(Unknown Source)
 at sun.plugin2.applet.JNLP2Manager.prepareLaunchFile(Unknown Source)
 at sun.plugin2.applet.JNLP2Manager.loadJarFiles(Unknown Source)
 at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
Exception: java.io.IOException: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar
exception: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar.
java.io.IOException: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar
 at com.sun.deploy.net.DownloadEngine.getCachedResourceFilePath(Unknown Source)
 at com.sun.javaws.LaunchDownload.getSignedJNLPFile(Unknown Source)
 at com.sun.javaws.LaunchDownload.checkSignedLaunchDescHelper(Unknown Source)
 at com.sun.javaws.LaunchDownload.checkSignedLaunchDesc(Unknown Source)
 at sun.plugin2.applet.JNLP2Manager.prepareLaunchFile(Unknown Source)
 at sun.plugin2.applet.JNLP2Manager.loadJarFiles(Unknown Source)
 at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
Exception: java.io.IOException: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar
JavaFXApplication3.jnlp
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="/PiFx/FxFiles/" href="JavaFXApplication3.jnlp">
 <information>
 <title>JavaFXApplication3</title>
 <vendor>Saurabh</vendor>
 <homepage href="/PiFx/FxFiles/"/>
 <description>JavaFXApplication3</description>
 <offline-allowed/>
 <shortcut>
 <desktop/>
 </shortcut>
 </information>
 <resources>
 <j2se version="1.5+"/>
 <extension name="JavaFX Runtime" href="/PiFx/FxFiles/javafx-rt.jnlp"/>
 <jar href="/PiFx/FxFiles/JavaFXApplication3.jar" main="true"/>
 <jar href="/PiFx/FxFiles/lib/jdom.jar" main="true" />
 </resources>
 <application-desc main-class="com.sun.javafx.runtime.main.Main">
 <argument>MainJavaFXScript=misc.MyChart</argument>
 </application-desc>
 <update check="background">
</jnlp>JavaFXApplication3_browser.jnlp
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="/PiFx/FxFiles/" href="JavaFXApplication3_browser.jnlp">
 <information>
 <title>JavaFXApplication3</title>
 <vendor>Saurabh</vendor>
 <homepage href="/PiFx/FxFiles/"/>
 <description>JavaFXApplication3</description>
 <offline-allowed/>
 <shortcut>
 <desktop/>
 </shortcut>
 </information>
 <resources>
 <j2se version="1.5+"/>
 <extension name="JavaFX Runtime" href="/PiFx/FxFiles/javafx-rt.jnlp"/>
 <jar href="/PiFx/FxFiles/JavaFXApplication3.jar" main="true"/>
 <jar href="/PiFx/FxFiles/lib/jdom.jar" main="true"/>
 </resources>
 <applet-desc name="JavaFXApplication3" main-class="com.sun.javafx.runtime.adapter.Applet" width="500" height="500">
 <param name="MainJavaFXScript" value="misc.MyChart">
 </applet-desc>
 <update check="background">
</jnlp>Applet Code
javafx({
archive: "../FxFiles/JavaFXApplication3.jar",
draggable: true,
height:hgt,
width:wdt,
code: "misc.MyChart",
name: appletName,
id: appletName
});

Not able to access Site logo from layout and css After removing all the permission from site

Hi Techis,
I have stucked here, actually I have removed permissions from all the users from the site and after sometime I got the mails from client that they are not able to access the Site logo and css in the site.
When I logged from Farm account and checked I can see everything working fine.Also the masterpage and all are checked in
I am not getting whats the exact issue.I stucked here from last one day Please help me to solve this issue.
Thanks Regards,
Simanchal

Hello,
Is it the publishing site? If so then go to site permission and provide permission to "NT AUTHORITY\authenticated users" to "Style Resource Readers" group.
You also need to make sure that "style library" is inheriting permission from parent otherwise you need to give at least read permission to library for all users. To verify this, just open view all site content page-->then click on style library,then
check permission.
Let us know your result
Hemendra:Yesterday is just a memory,Tomorrow we may never see Please remember to mark the replies as answers if they help and unmark them if they provide no help

User has contribute access but he is not able to access the site collection...

User has contribute access but he is not able to access the site collection...

What error does he get.
Can you share fiddler trace(check if any 404 error)
what error do we see in ULS Logs
Create disableloopback
registry on server
http://support.microsoft.com/kb/926642/en-us

Not able to access webservice after migrating from 8.1 to 10.3,plz help

Hi All,
Prev our application was running in weblogic 8.1 and now we moved to 10.3
We are able to deploy our webservice in 10.3 and access the wsdl but we are not able to access the webservice from the client.
Even the testclient is not comming up.
After spending long time in that,now i dont have any clue on this issue.
Plz help on this
Thanks ni advance,
Mouli

Sunil,
We are not seeing any exception.We regenerated the webservice and then deployed in the 10.3
When we make req from the client ,we are getting null response but thing is there are no log trace in the server side for that
folllowing is the input string we are pasing to the method notifyservice
IN the client we pass the wsdl url and then pass the following input string and hit the notifySerivce method
Req:
<?xml version="1.0" encoding="UTF-8" standalone="no"?><object><GLCCode>102431</GLCCode><callBackNumber>888256798</callBackNumber></object>
Res:
<m:notifyService xmlns:m="http://www.testportal.com/outbound/tsp/WowWebservices">
<result xsi:nil="true"/>
</m:notifyservice>
Therre was an exception in the client side,plz check below
javax.xml.rpc.soap.SOAPFaultException: Failed to get operation name from incoming request
at weblogic.webservice.core.ClientDispatcher.receive(ClientDispatcher.java:317)
at weblogic.webservice.core.ClientDispatcher.dispatch(ClientDispatcher.java:147)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:473)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:459)
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:569)
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:422)
Thanks For your time,
Mouli

Employee user not able to access catalogs from EBP

Similar Messages

Maybe you are looking for