Employees - Not able to view ESS iviews

Hi All,
We are configuring my SAP ERP 2004 ESS 60.2 and MSS 60.1 in EP 6.0. We are not able to view ESS iviews if we login as an end user(employee) but if we login as administrator, we are able to view all the ESS iviews.
If i give super admin role to employee, then he is able to see the iviews.
Could any one tell us wat is the problem.
I have mapped user id in portals and R/3 also.
Waiting for your valuable suggestions.
Regards,
Mahesh.M.R

Hi Sharadha,
I went to note <b>939412</b> ie
Assign the following permissions to an End user.
1.
Goto Content Administrator ->Portal content ->Content Provided by SAP ->End User Content -> Employee Self Service
Right click on  Employee Self Service. select open-> Permissions
Assign read authorization to default user group "everyone".
Check the 'EndUser' checkbox
Save the Assigned permissions
2.
Goto System administration -> Permissions.
Goto  Portal content ->Content Provided by SAP ->srvconfig
Assign read authorization to default user group "everyone".
Check the 'EndUser' checkbox
Save the Assigned permissions.
I did accordingly for the first step, Now i am not able to find srvconfig in content provided by SAP(system Admin).
How to go abt now..
Awaiting for you response.
Thanks & Regards,
Mahesh.M.R

Similar Messages

  • Not able to get ESS iviews for 80 and 80C

    Dear All,
    We have implemented ESS MSS BP (ERP 2005 EHP3) and have standard iviews working on the portal.
    But when i preview the iview for section 80 and 80 C, i get the following error.
    " com.sapportals.portal.prt.runtime.PortalRuntimeException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name essinsec80 "
    Also, am not able to find the application in the Webdynpro Administrator.
    Can somebody throw their experiences regarding why this is occuring and how this can be resolved.
    Thanks
    Regards
    Piyush Bhurangi

    Hi Piyush,
    ESS MSS BP (ERP 2005 EHP3)
    as you said earlier that you have applied EHP3 .
    But the pacth you have applied is EHP4 and not EHP3
    BP_ERP5ESS 1.41 SP3 (1000.1.41.3.0.20090430054002)
    And this is a cause of the problem which you are facing .
    You are applying the BP which is relase EHP4 and you SAP_ESS is on relase 600 as well as your backend patch is also not equivalent for BP -ESS EHP4.
    So the solution is ;-
    If you have to use BP-ESS with EHP4 , then you have to upgrade you backend SAP_HR with EHP4 and SAP_ESS patch with 603.
    Thanks
    Anil

  • Employee not able to view locked personal data in ESS

    Gurus,
    Cna anyone suggest, if the employee enter some details in the personal data related infotypes, the details get locked in backend. we are fine with this, but these locked details are not visible to the Employee thrugh ESS.
    is it possible to arrange for such view in Standard implementation, we are in 604 enviornment.
    thnks nd regards
    vedashre

    Hi
    This issue is not clear
    Generally ESS users do not have SAP GUI access - even if they did - one of their sessions would still be open for maintainence
    The majority of locks issues that occur is if ESS user has opened a session to maintain their Personal details and HR
    admin is trying to get into the record in ECC or HR administrator is editing the PERNR in the back-end and ESS user tries to access the record - in the case only the user to first create the lock will have access
    Best wishes
    Stuart

  • Employee not able to view the Leave/Absence Types

    Hi experts,
    I have done the settings of Workflow with leave types in table V_T544S_WEB with grouping 40 against the leave type.
    Workflow task iD is TS21500004.
    The User Grp is set to 40.
    But when the empolyee checks system shows no data available .
    Can anybody please put some insight.

    Hi,
    I hope you are using the standard workflow id and you have assigned the same to the rue group and absence type in table VV_T554S_WEB.
    But for the absence to be displayed check the table  VV_PTARQ_TCONSTR_LIST and the settings against the rule group.
    Also you can check the applied leave and the status in the Create Leave Request application - Overview of Leave tab. There is another application Leave Overview where also you can check the status of the applied leave.
    Regards,
    Mithun K

  • Not able to view the 'proxy-to-remote' iView under 'user admin' role

    Hi All,
    I am not able to view the 'proxy-to-remote' iView under 'user admin' role. I need this for Remote role assignment for FBN .
    I am using the portal version EP 7.0.
    Can anybody help me .
    Thanks & Regards,
    Amit Kade

    Hi, Amit
    u have to assign the one iview in User-Admin role
      Goto->Contentadmin-> portal content->content provded by sap->Admin interface->iview template ->select proxy to remote role iview.
    and this iview assign to user admin role the u can able to see.
    if its solve please give me 10 points
    thanks & regards
    chitta

  • Not able to view data and song folders/files in my ipod

    Hi All,
    I have a 30 GB Video iPod which I have been using since the past 6 odd months. Recently, my iPod was infected with a virus. I managed to clean up the virus but since then I am not able to view the data and song files or folders stored in the iPod. I can only view a hidden folder with the name 'astry' and when I double click on it nothing is visible. I tried some freewares available for data recovery but they just scan the iPod and tell that so many number of files are available. But for retrieving them I will have to buy the software.
    Has anyone faced similar project? Does anyone knows any solution to this problem?
    Thanks,
    Sameer

    Hi Aneesh,
    First be more clear about Aria Application. As Aria, is been related to an hrms part of an organization carrying the people infomation and it has some separate features too.
    But in your prespective i couldnt able to understand what do you want to do with that packeged application.
    Since you want to customize the aria application according to your organization needs means, First collect all your necessary organization information that is needed(like tables etc.). Then substitute those (i.e) your organization tables in the appropriate places in the form of query.
    Please dont use the same Aria people table, as the Oracle may framed according to their employee information. Nearly Aria application has 200 supporting objects. If you want to use the same objects means whether u r going to creating nearly 200 supporting objects..It is not worth at all.
    Please be more clear in your requirement that, what you are doing, and then raise the question. Be more prepared with your tables along with datas, and let give your reply once you were been prepared with your organization details table.
    As there are more peoples in the forums to help you other than me.
    Brgds,
    Mini
    Mark Answers Promptly

  • Not able to view the fields ....made through enhancement 0002--

    Dear Freinds,
                I have made enhancment for infotype's 0002 and  0023 . However when i am looking through PA30 for a personnel number iam not able to view the fields created in 0002 infotype , however iam able to view the fields created in infotype 0023 . Is there is a any setting's i have to make so that i can view these fields created in infotype 0002 also ??
    please let me know .
    regards
    vamsi.

    Dear Deepak
                yes this is enhancement to 0002 and 0023 ... i have to add one field for the
    0002 ..........as ihave to add chinese name for my requirement ..................
    and i have done some new fields for 0023. if can give me your personnel id i can
    send the screen shots ........
    i want to tell one thing.........   i have created for 0002 by adding new  the new field (chinese name) .. it created a z program.ZP000200(Module pool)  with the below
    includes
    INCLUDE ZP000210.
    INCLUDE MPPDAT00.
    INCLUDE FP50PPSB.
    INCLUDE MPPERS00.
    INCLUDE ZP000220.
    INCLUDE ZP000230.
    INCLUDE ZP000240.
    and when i went to the screen  0200 i have found the field which i have added
    P0002-ZZCHNAM  type char 20 . and i executed from here itself (by clicking F8).
    and iam able to see the field which i have added
    under additional fields...........but the same if i go in PA30 and create .........for an employee (molga = 27)... i dont find the field which i created...... i have done this
    change for the country 27 only.
    regards
    vamsi
    regards

  • Project Manager not able to view their expenses

    Hi all..
    Project Manager is not able to view their expenses for a perticular project.
    Can any one help..
    Cheers..

    Hi
    Please elaborate....
    On which release?
    Which forms or html pages were tested?
    Verify project manager is still active employee in HR, and has not end dated the role of project manager on the project...
    Have you enabled any security extensions?
    Dina

  • Not able to view CrystalReportViewer in Azure Application.

    Hi All,
    We have an application which was developed in VS 2005 with .Net framework 2.0 and crystal report version 10.
    We have migrated this application to azure using VS 2013 with .Net framework 4.5 and crystal report version 13.2.
    We have included the Crystal report msi in the package for deploying it on azure.
    We have used the CrystalReportViewer on one of the page in our application to view the reports but we are not able to view it.
    Thanks

    Here is a KBA that discusses Azure and CR:
    1765620 - What version of Crystal Reports supports Windows Azure?
    Note that the simple string "crystal azure" in the search box at the top right corner found the above as the very 1st hit. E.g.; please search 1st...
    The KBA points to the SAP Idea Place where anyone can ask for an enhancement to CR. Note that the Idea has been viewed 264 times and only voted up 4 times (one of those votes is mine). E.g.; it does not appear to be a highly demanded enhancement and I do not believe it will ever see the light of day.
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Not able to view catalogs in CCM after clicking on "edit catalog"

    Hi all,
    I am not able to view a single catalog (supplier, procurement or master) in CCM after clicking on edit catalog.
    After clicking on "start" pushbutton, it is giving warning message "Error while editing Master catalog"
    Could anybody tell me, what would be the problem ??
    Thanks in advance.
    Regards,
    Vivek !!
    Edited by: vivek kulkarni on May 26, 2009 12:18 PM

    Hi Jason,
    Thanks for reply and solution.....
    but this problem is only for my user ID and not for all other user ID.
    when we tried with other user IDs, all the catalogs are in green state and working fine. For my ID I am not able to view any catalog into edit catalog screen. When I am trying to search any catalog it is giving me warning message "Error in master catalog". When checked in SLG1 I got error as "catalog (catalog name) not found".
    Is it related to any user setting or like that... as this is the issue with my individual ID.
    Please suggest.
    Thanks !
    Vivek

  • Not able to view mails in inbox

    Hi I use ovi mail and currently i am not able to view mails in any of the folders. I use the same user name as that of my yahoo mail account. Does this has to do anything.

    Have you tried a battery pull yet?
    Please click the Thumbs Up icon if this comment has helped you!
    If your issue is resolved, please click the solution button on the resolution!
    Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

  • Not able to view PDF in Safari 6.0.2

    Hi,
    Not able to view pdfs in my Safari 6.0.2. I get a black screen and the following message -The Adobe Acrobat/Reader selected for viewing PDF documents in browsers cannot be found at its installed location; it may have been moved or deleted. Please reinstall or repair the application. (16:9)
    I am able to download and view the pdfs though. Hw do I solve the problem.
    Thanks,

    Reinstall the latest version of Adobe Reader - http://www.adobe.com/products/reader.html - it will install the latest version of the "Adobe Acrobat NPAPI Plug-in, Version 11.0.01" and you'll be able to view any PDF file inline using Safari (Safari does have a 'built-in' PDF renderer that works for some files, but not for any AcroForms, etc.). And Preview is just about the worst PDF reader available - I would make sure that you set Adobe Reader to be your default application for viewing and interacting with PDF files.
    Good luck - be sure and restart Safari after the plugin is intstalled. Call back should you have any problems.
    Clinton

  • Not able to view Folders in Business area.

    Hi,
    User has been given access to XYZ business area from discoverer Admin but not able to view folders in Discoverer Plus (web based) but he can view the folders under same business area (ie XYZ) using Discoverer Desktop Application. Only one user is facing the problem other users with same business area (ie. XYZ) can view all the folders under that business area. User tried on other PC also but result the same.

    I faced same kind of problem some time back & found JInitiator as the cause. Try unintalling older Installation of JInitiator & reinstall it & it should work.

  • Not able to view the content in Microsoft help viewer (MS VS 2012)

    Hello Team,
    I'm Rahul from Daimler-Chrysler, Bangalore location. I’m the IT Engineer for Daimler-Chrysler.
    We tried many settings in IE but still not able to resolved. So i need more expert help. 
    My customer having one issue- 
    # User is not able to view the content in Microsoft help viewer (MS VS 2012), below is the error: Its opening in HTML Format.
    So please help me. Contact no- +91-9972004298. and personal id:- [email protected]/[email protected]
    I call you to Microsoft customer care they advice me to ASK Question. Please help me, I'm waiting for your reply.
    Thanks,
    Rahul B. Patil.
    +919972004298.

    Hi Sri,
    it looks that your HANA instance has been created before we enabled the web-based development workbench. Some privileges are missing, we can't migration those existing instances.
    Nevertheless you can ignore the error above. You can see all the content inside your instance "smstest1".
    If you want to get rid of the cosmetic issue. You might delete this instance and create a new one.
    Best regards
    Xu

  • Not able to view any report in BI Publisher 11g

    Hello All
    I have installed BI Publisher 11g in Intel Solaris 10. I started of from the scratch, created a Data Model, then created a Report. but now I am not able to view the report. Upon clicking the report name or Open it logs me out.
    I am logged in as user, weblogic the default user created while installation.
    Please help
    Ash

    Hi Rony,
    You may have created the report initially with Web Layout only - therefore there will no paper layout.
    To 'get' the paper layout back, select your Report module name from the Builder and then select Tools-->Report Wizard. Select 'Create both web and Paper Layout' and then go through the various wizard steps.
    Best of Luck.
    Regards,
    John

Maybe you are looking for