Empty alsamixer
Hello all!
Please advise me in my trouble. I missed all my sound regulators but 'Master'..
It was happend after quick trying to fix my skype troubles) And I can't call to mind what I did.
What are should be my first steps for fixing this problem?
dteplyakoff wrote:And I can't call to mind what I did.
The first step would be to think harder on this. Were you following a guide/wiki? Did you take the advice offered on a forum?
If you were solving that problem in what I would think to be a wise way, you'd probably have written an ~/.asoundrc. If you have one, you can delete/move it.
If you were solving that problem in a less wise way, you may have edited the system-wide file most likely at /etc/alsa/asoundrc, or something similar. If you modified that, then you'll need to get a default copy from the alsa package.
Perhaps you installed OSS or pulseaudio, or something else. You can check for these with pacman.
edit: also, in alsamixer, try F6 to be sure you have the proper device selected.
Last edited by Trilby (2012-07-09 20:57:43)
Similar Messages
-
Really want to use arch on 8 donated gateway e-3200 pc's, to set up an internet cafe for senior citizens.
They're pII 300 - 450 deschutes, with 128 mb of memory.
Installation went smoothly, everything works -running kde 3.2.2- except for sound.
Soundcard is cs4236, modprobe returns module not found. There is a snd-cs4236.ko in modules directory.
Tried all different alsa configuration, no luck.
Ran a knoppix 3.3 disk, and it configured sound with ad1848 module and it works.
But there is no configuration information in modules.conf.
Any help is greatly appreciated.
:shock:Found it and will read through it. Didn't know it was a help system.
thanks.
Followed Instructions, but i'm getting this error
"modprobe: FATAL: Error inserting snd_cs4236 (/lib/modules/2.6.6/kernel/sound/isa/cs423x/snd-cs4236.ko) : No such device"
Does this mean i have to recompile the kernel.
I alsao tried "alsaconf", it returns "no legacy cards found".
I tried another set of instructions that placed "snd-mixer-oss snd-seq-oss snd-pcm-oss" in the modules array in /etc/rc.conf. Now when i "lsmod" or "cat /proc/modules" i can see the soundcards modules, but there seems to be no mixer to set any volume.
"/dev/snd" has "controlC0 and timer"
"/dev/sound" is empty
"alsamixer" returns "snd_ctl_open failed for default: No such device"
"amixer set MASTER 100 unmute" returns "No such device"
"amixer set PCM 100 unmute" returns "No such device"
Going to try all those options to be placed in "/etc/devfsd.conf"
:shock: -
Laptop rear speakers muted. Not showing up in alsamixer.
This is my second time around with Arch. I had this same problem before but I was able to Google the issue no problem, but I can't for the life of me find the right combination of keywords this time around. I'm sure someone will come in here and take 3 seconds to find it...
Anyways, like the title says. My rear speakers aren't playing any noise. Last time I am pretty sure that I just had to type in some command and then go into alsamixer to turn the volume up on the rear speakers, but when I use the 'alsamixer' command I can only see the "master" channel. I also installed pulseaudio but found nothing in the settings.
HP pavilion computer, using ALSA and and pulseaudio. I'm not sure what other information would be needed. If I there is some command I need to type in to list some info about my hardware/drivers please let me know and I will do that for you. I know this is an easy fix, and I did try to Google it myself before coming here. I just couldn't find anything that fixed my issue this time around.
Thank you.
Last edited by AnArchist (2013-06-06 00:12:00)opt1mus wrote:
AnArchist wrote:Are bumps allowed? [...]
No - https://wiki.archlinux.org/index.php/Fo … te#Bumping
It's considered obnoxious, as it's an empty post with no extra detail/troubleshooting -- also, asking if it's ok to bump with a bump makes the question rather redundant, does it not? Like knocking on a door and entering at the same time.
Hey, atleast I waited 24 hours. Now I know, thanks!
Anyways, the output of aplay -lL
$ aplay -lL
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default
Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=PCH
HDA Intel PCH, 92HD81B1X5 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, 92HD81B1X5 Analog
Front speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, 92HD81B1X5 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, 92HD81B1X5 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, 92HD81B1X5 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, 92HD81B1X5 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, 92HD81B1X5 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=PCH,DEV=0
HDA Intel PCH, HDMI 0
HDMI Audio Output
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: 92HD81B1X5 Analog [92HD81B1X5 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0 -
[SOLVED] ALSA and intel soundcard - not detected, /dev/snd is empty
Hi, there was some topics mounths ago about this but I still can't figure out how to get my sound to work.
The main problem is that my soundcard is not detected and /dev/snd seems a little empty. I can't find the controlc0,1 files either....
Here is some useful info.
root@red red]# ls -l /sys/module/snd/holders/
total 0
lrwxrwxrwx 1 root root 0 Jun 15 17:09 snd_hda_codec -> ../../snd_hda_codec
lrwxrwxrwx 1 root root 0 Jun 15 17:09 snd_hda_intel -> ../../snd_hda_intel
lrwxrwxrwx 1 root root 0 Jun 15 17:09 snd_hwdep -> ../../snd_hwdep
lrwxrwxrwx 1 root root 0 Jun 15 17:09 snd_mixer_oss -> ../../snd_mixer_oss
lrwxrwxrwx 1 root root 0 Jun 15 17:09 snd_pcm -> ../../snd_pcm
lrwxrwxrwx 1 root root 0 Jun 15 17:09 snd_pcm_oss -> ../../snd_pcm_oss
lrwxrwxrwx 1 root root 0 Jun 15 17:09 snd_seq -> ../../snd_seq
lrwxrwxrwx 1 root root 0 Jun 15 17:09 snd_seq_device -> ../../snd_seq_device
lrwxrwxrwx 1 root root 0 Jun 15 17:09 snd_seq_oss -> ../../snd_seq_oss
lrwxrwxrwx 1 root root 0 Jun 15 17:09 snd_timer -> ../../snd_timer
[root@red red]# lsmod | grep '^snd' | column -t
snd_seq_dummy 1439 0
snd_seq_oss 28928 0
snd_seq_midi_event 5412 1 snd_seq_oss
snd_seq 50530 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 5233 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_hda_intel 22514 0
snd_pcm_oss 39096 0
snd_hda_codec 68863 1 snd_hda_intel
snd_hwdep 6150 1 snd_hda_codec
snd_mixer_oss 16956 1 snd_pcm_oss
snd_pcm 70924 3 snd_hda_intel,snd_pcm_oss,snd_hda_codec
snd_timer 19684 2 snd_seq,snd_pcm
snd 57209 10 snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_pcm_oss,snd_hda_codec,snd_hwdep,snd_mixer_oss,snd_pcm,snd_timer
snd_page_alloc 7161 2 snd_hda_intel,snd_pcm
[root@red red]# ls -l /dev/snd/
total 0
crw-rw---- 1 root audio 116, 3 Jun 15 17:00 seq
crw-rw---- 1 root audio 116, 2 Jun 15 17:00 timer
Souncard : Don't know the exact name, the "intel hd" one with an ICH7 bridge
Mobo : intel d945gclf (little atom board, not the newer ones)
Notice that line : snd_hda_intel 22514 0
Seems to me that the module is loaded, am I right?
EDIT: Sorry, maybe I am in the wrong section...
Last edited by Lrouge (2010-06-18 18:33:54)Looks pretty complete to me. (OK, /dev/snd does look sparse.) What do you see when you run alsamixer and press the F5 key?
$ sudo su -
# pacman -Sy alsa-utils
# alsamixer
Press F5 and check for:
* Master, Speaker, Front, Line, PCM volume down (if any)
* Any MM (bottom of vertical bar, signifies: line is muted) -- mute / un-mute with the 'm' key
Press Esc key to exit alsamixer + save changes.
Also, right after booting, run: dmesg | grep -i codec
Look for something like "Realtek" or "ALC662" or similar.
Manually add codec driver: modprobe snd_hda_codec_realtek
ls -al /dev/snd
drwxr-xr-x 2 root root 60 May 28 19:35 by-path
crw-rw---- 1 root audio 116, 7 May 28 19:35 controlC0
crw-rw---- 1 root audio 116, 6 May 28 19:35 hwC0D2
crw-rw---- 1 root audio 116, 5 May 28 19:35 pcmC0D0c
crw-rw---- 1 root audio 116, 4 May 28 19:35 pcmC0D0p
crw-rw---- 1 root audio 116, 3 May 28 19:35 seq
crw-rw---- 1 root audio 116, 2 May 28 19:35 timer
lsmod | grep snd
snd_hda_codec_realtek 179443 1
snd_seq_dummy 1099 0
snd_seq_oss 25304 0
snd_seq_midi_event 4452 1 snd_seq_oss
snd_hda_intel 18921 0
snd_seq 42628 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 4313 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_hda_codec 56728 2 snd_hda_codec_realtek,snd_hda_intel
snd_pcm_oss 33693 0
snd_hwdep 5102 1 snd_hda_codec
snd_pcm 57479 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_mixer_oss 14810 1 snd_pcm_oss
snd_timer 16117 2 snd_seq,snd_pcm
snd 43847 11 snd_hda_codec_realtek,snd_seq_oss,snd_hda_intel,snd_seq,snd_seq_device,snd_hda_codec,snd_pcm_oss,snd_hwdep,snd_pcm,snd_mixer_oss,snd_timer
soundcore 5007 1 snd
snd_page_alloc 5809 2 snd_hda_intel,snd_pcm -
Cannot assign an empty string to a parameter with JDBC type VARCHAR
Hi,
I am seeing the aforementioned error in the logs. I am guessing its happening whenever I am starting an agent instance in PCo. Can somebody explain whats going on?
Regards,
Chanti.
Heres the complete detail from logs -
Log Record Details
Message: Unable to retreive path for , com.sap.sql.log.OpenSQLException: Failed to set the parameter 1 of the statement >>SELECT ID, PARENTID, FULLPATH, CREATED, CREATEDBY, MODIFIED, MODIFIEDBY, REMOTEPATH, CHECKEDOUTBY FROM XMII_PATHS WHERE FULLPATH = ? <<: Cannot assign an empty string to a parameter with JDBC type >>VARCHAR<<.
Date: 2010-03-12
Time: 11:32:37:435
Category: com.sap.xmii.system.FileManager
Location: com.sap.xmii.system.FileManager
Application: sap.com/xappsxmiiearSounds like a UI browsing bug (when no path is selected from a catalog tree folder browser) - I would suggest logging a support ticket so that it can be addressed.
-
Oracle, Null and empty Strings
Currently I'm facing problems with a class, which contains a String, which
is set to "" (empty String).
When the class is persistent, oracle writes null to the table column
(which seems to be common oracle behaviour) and when retrieving the class,
the field is set to null as well, giving me a lot of null-pointer
exceptions.
Anyway ... I can cope with that (just a lot of extra work)
far worse is the problem, wenn searching objects, that have this field set
to "" oder null.
Oracle can't find the records because JDO creates Querys "where
string=null" or "where string=''" , where oracle expects "where string is
null" to find the records.
Is there a workaround or solution ?Yeah, that would work as well, thx, but since I have to cope with
null-Strings now everywhere in my program, it doesn't hurt just to forbid
empty strings on the program side.
In future times I'll test on Oracle first, then porting to DB/2 - this way
I suppose work is far less to garant compability.
Nevertheless ... having to set the bankcode into quotes is a kodo bug in
my opinion.
Kodo knows the type of classfields (in this case string) and shouldn't
send the parameter as a BigDecimal to the database.
Given that, and having only bankcodes of null (only neccesary when using
Oracle), the method would look like:
public Collection getAccounts (String bankCode)
throws Exception
return getAccounts (Account.class, "bankcode=="+bankcode);
which is how a transparent persistent layer, um, should be , um , I mean
... just transparent ;-D
Marc Prud'hommeaux wrote:
Stefan-
Couldn't you just do something like:
public Collection getAccounts (String bankCode)
throws Exception
String filter;
if (bankCode == null || bankCode.length () == 0)
filter = "(bankCode == null || bankCode == "")";
else
filter = "bankCode == "" + bankCode + """;
return getAccounts (Account.class, filter);
If I understand the problem correctly, this should work for all the
databases.
In article <[email protected]>, Stefan wrote:
What operations are you performing to cause this SQL to be issued? You
say you are having trouble removing objects, but this is clearly not a
DELETE statement. Is this the SQL that is issued when looking up
objects by identity?I'm not removing objects, I was removing just quotes from parameters ;-)
A string column... is it also represented as a string field in your class?Yeah ... just to give you an impression of the code:
First we have a class, representing a bank account:
public class Account {
private AccountMgr myAccountMgr;
private String bankCode;
private String id;
Note, that in nearly all cases bankCode will be a number or null.
I have a second class "AccountMgr", which does all of the persistant stuff
(seaching, making persistent etc.)
This class has two methods, one versatile (protected) to retrieve accounts
by a given filterString and one who just returns accounts by bankCode,
building the expected filterstring. Here is my current working version:
public class AccountMgr {
public Collection getAccounts(String bankCode) throws Exception {
if (bankCode!=null) {
if (bankCode.equals("")) {
throw new Exception("check code, bankCode='' not allowed to get
same behavior from DB2 and Oracle");
// if set, quote the bankCode
bankCode="""+bankCode+""";
return getAccounts(Account.class,"bankCode=="+bankCode);
protected Collection getAccounts(Class accountClass, String filterAdd)
throws Exception {
PersistenceManager pm = MyHelper.getPersistenceManager();
String filter="";
if (filterAdd!=null && !filterAdd.trim().equals("")) {
filter+=filterAdd + " && ";
filter += "myAccountMgr==_accMgr";
Query query = pm.newQuery(accountClass, filter);
query.declareParameters("AccountMgr _accMgr");
return (Collection) query.execute(this);
As you can see, in the first method I have to set the bankCode into
quotes, when it's not null.
This is because otherwise a filter like "bankCode=1234" will be translated
in a way, where 1234 is send as a BigDecimal to the database:
[...] executing statement <4239745>: (SELECT [...] FROM JDO_ACCOUNT t0
WHERE t0.BANKCODE = ? : [reused=1;params={(BigDecimal) 1234}]
Marc Prud'hommeaux [email protected]
SolarMetric Inc. http://www.solarmetric.com -
Hi There,
As far as I know, Null is not the same as an empty string; however, when I try this out, I get some unexpected results (well, at least unexpected for my liking):
SQL> CREATE TABLE TS (MID NUMBER,
2 MDESC VARCHAR2(20) DEFAULT '' NOT NULL);
Table created.
SQL> INSERT INTO TS VALUES(1,'');
INSERT INTO TS VALUES(1,'')
ERROR at line 1:
ORA-01400: cannot insert NULL into ("TT"."TS"."MDESC")So, according to the above scenario, I can't insert an empty string!! However, an empty string is a valid string that doesn't have tuples/data!!
How come Oracle translates the null string '' as NULL?
ThanksWilliam Robertson wrote:
There is a special case to do with CHAR values, whereby '' counts as a string and so gets blank-padded, whereas NULL does not.Are you referring to:
SQL> DECLARE
2 flag CHAR(2);
3 PROCEDURE check_null (p_flag IN CHAR)
4 IS
5 BEGIN
6 IF p_flag = ' '
7 THEN
8 dbms_output.put_line ('flag is equal to '' ''');
9 ELSIF p_flag IS NULL
10 THEN
11 dbms_output.put_line ('flag is null');
12 ELSE
13 dbms_output.put_line ('other');
14 END IF;
15 END;
16 BEGIN
17 flag := '';
18 check_null (flag);
19 flag := NULL;
20 check_null (flag);
21 end;
22 /
flag is equal to ' '
flag is null
PL/SQL procedure successfully completed.
SQL> alter session set events '10932 trace name context forever, level 16384';
Session altered.
SQL> DECLARE
2 flag CHAR(2);
3 PROCEDURE check_null (p_flag IN CHAR)
4 IS
5 BEGIN
6 IF p_flag = ' '
7 THEN
8 dbms_output.put_line ('flag is equal to '' ''');
9 ELSIF p_flag IS NULL
10 THEN
11 dbms_output.put_line ('flag is null');
12 ELSE
13 dbms_output.put_line ('other');
14 END IF;
15 END;
16 BEGIN
17 flag := '';
18 check_null (flag);
19 flag := NULL;
20 check_null (flag);
21 end;
22 /
flag is null
flag is null
PL/SQL procedure successfully completed.
SQL> SY.
P.S. Don't ask me why normal (or at least consistent) behavior is not the default. -
Null and empty string not being the same in object?
Hello,
I know that null and empty string are interpreted the same in oracle.
However I discovered the strange behaviour concerning user defined objects:
create or replace
TYPE object AS OBJECT (
value VARCHAR2(2000)
declare
xml xmltype;
obj object;
begin
obj := object('abcd');
xml := xmltype(obj);
dbms_output.put_line(xml.getStringVal());
obj.value := '';
xml := xmltype(obj);
dbms_output.put_line(xml.getStringVal());
obj.value := null;
xml := xmltype(obj);
dbms_output.put_line(xml.getStringVal());
end;
When creating xml from object, all not-null fields are transformed into xml tag.
I supposed that obj.value being either '' or null will lead to the same result.
However this is output from Oracle 9i:
<OBJECT_ID><VALUE>abcd</VALUE></OBJECT_ID>
<OBJECT_ID><VALUE></VALUE></OBJECT_ID>
<OBJECT_ID/>
Oracle 10g behaves as expected:
<OBJECT><VALUE>abcd</VALUE></OBJECT>
<OBJECT/>
<OBJECT/>
However Oracle 9i behaviour leads me to the conclusion that oracle
must somehow distinguish between empty string and null in user defined objects...
Can someone clarify this behaviour?
Thus is it possible to test if object's field is empty or null?However Oracle 9i behaviour leads me to the conclusion that oracle
must somehow distinguish between empty string and null in user defined objects...
Can someone clarify this behaviour?
Thus is it possible to test if object's field is empty or null?A lot of "fixes" were done, relating to XML in 10g and the XML functionality of 9i was known to be buggy.
I think you can safely assume that null and empty strings are treated the same by Oracle regardless. If you're using anything less than 10g, it's not supported any more anyway, so upgrade. Don't rely on any assumptions that may appear due to bugs. -
Difference in Null and Empty String
Hi,
I have been wondering about the difference between Null and Empty String in Java. So I wrote a small program like this:
public class CompareEmptyAndNullString {
public static void main(String args[]) {
String sNull = null;
String sEmpty = "";
try {
if (sNull.equalsIgnoreCase(sEmpty)) {
System.out.println("Null and Empty Strings are Equal");
} else {
System.out.println("Null and Empty Strings are Equal");
} catch (Exception e) {
e.printStackTrace();
This program throws Exception: java.lang.NullPointerException
at practice.programs.CompareEmptyAndNullString.main(CompareEmptyAndNullString.java:10)
Now if I change the IF Clause to if (sEmpty.equalsIgnoreCase(sNull)) then the Program outputs this: Null and Empty Strings are Equal
Can anyone explain why this would happen ?
Thanks in Advance !!JavaProwler wrote:
Saish,
Whether you do any of the following code, the JUnit Test always passes: I mean he NOT Sign doesnt make a difference ...
assert (! "".equals(null));
assert ("".equals(null));
You probably have assertions turned off. Note the the assert keyword has nothing to do with JUnit tests.
I think that older versions of JUnit, before assert was a language keyword (which started in 1.4 or 1.5), had a method called assert. Thus, if you have old-style JUnit tests, they might still compile, but the behavior is completely different from what it was in JUnit, and has nothing to do with JUnit at all.
If you turn assertions on (-ea flag in the JVM command line, I think), the second one will throw AssertionError. -
Check for null and empty - Arraylist
Hello all,
Can anyone tell me the best procedure to check for null and empty for an arraylist in a jsp using JSTL. I'm trying something like this;
<c:if test="${!empty sampleList}">
</c:if>
Help is greatly appreciated.
Thanks,
Greeshma...A null check might not be you best option. If your requirement is you must have both the date and time component supplied in order to populate EventDate, then I would use a Script Functoid that takes data and time as parameters.
In the C# method, first check if either is an empty string, if so return an empty string.
If not, TryParse the data, if successful, return a valid data string for EventDate. If not, error or return empty string, whichever satsifies the requirement. -
Interactive Report view is empty
Hi,
I'm on CRM 7.0 EHP3. I'm encountering empty report criteria and display when open the Campaign effectiveness and all other interactive report page. Please see the screen shot below. There is no error message on the screen, as well as ST22.
I've configured the interactive report and ran the configuration wizard /CRMBW/CONFIG_WIZARD successfully and no error found.
Also the roles SAP_CRM_OR_ADMIN, SAP_CRM_OR_CONFIG and SAP_CRM_OR_USER and SAP_ALL are given to the user in both clients.
Please let me know what could be the causes.
Thanks in advance.
cheers,
juliusOkay, problem seems solved. I don't know if it is a bug or a feature... (: Anyway, this view selects data from threads that had been created from a portal application. And if you create threads from WC_Collaboration server admin console, there's no data will be selected with FORUMCRAWLER_VW view. Sorry, have no time to check SQL query for those DB view, may be this behaviour is reasonable.
Edited by: Insomnium on 17.01.2013 2:33 -
Can I somehow print an empty report, and specify with a parameter how many times it should be repeated?
The report is a form with checkboxes, and sometimes we want the empty one for someone to fill in when out on the field. And since this form is a subreport, we cant print the entire report over again, but need the subreport to be repeated, let's say five times.
/Thank you!Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly
-
My photos on iphotos just became empty boxes, bordered by white intermittent lines. If I click on a photo it comes up, but I can't see what each photo is at a glance. Any ideas how to resolve this? thanks
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the options to rebuild the thumbnails.
Regards
TD -
Error while running fiori application in launchpad which is having image in its empty view
Hi Experts,
I have created a fiori application using odata services and uploaded it into launchpad.I want to display image in its empty view. It is getting displayed when i run the application on eclipse but i am getting the error for the same when i run it on launchpad.
Below is the error:
"NetworkError: 404 NOT FOUND - http://ws-sapsvr01:8010/sap/bc/ui5_ui5/ui2/ushell/shells/abap/img/TeamSAP.jpg"
Can any body help me solve this issue why i am getting this??
Thanks & Regards.
Rahul.Hi Masa,
In my case, i've the file 'preco_ok.jpg' located inside my extended project (Z_MM_MyProject -> WebContent -> images)
And I refer it as follow:
<Image src="images/preco_ok.jpg" class="spaceIndicator"/>
In the local enviroment it is ok, but on launchpad, the 404 error is shown:
GET http://host:port/sap/bc/ui5_ui5/ui2/ushell/shells/abap/images/preco_ok.jpg 404 (NOT FOUND)
Thank you for your support. -
OBI 11G sUnquotedTableName.empty() error while creating a report
hello guru's
We have a problem when trying to build a report in OBI 11G. We have migrated an RPD from 10 to 11 and one 1 installation DEV all is OK, on TEST we get all kind of problems.
One of the main issues is when trying to build a report and clicking on the + to expand a node of a dimension object we hget the sUnquotedTableName.empty() error
When going to the logs I see the following details of the error.
Does anyone have a clue and can help us out?
Koen Verheyen
ProblemhMessage Level 10
Relationship ID 0:1
Component OBIPS
Module saw.httpserver.processrequest
Host XXXXXXX
Host IP Address XXXXXX
Thread ID 2836335504
ECID 0000Ijcd5UzFw000jzwkno1Clgr10001eK
Message
Assertion failure: !sUnquotedTableName.empty() at line 1936 of /scratch/aime1/adestore/views/aime1_dadvfa0138/bifndn/analytics_web/main/project/webutil/tablenameutils.cpp
Supplemental Detail
File:tablenameutils.cpp
Line:1936
Location:
saw.httpserver.processrequest
saw.rpc.server.responder
saw.rpc.server
saw.rpc.server.handleConnection
saw.rpc.server.dispatch
saw.threadpool
saw.threads
SessionID: 07vh3ae7bqk8nsnslpm32fhtcm9nsc5cd7va98q
AuthProps: AuthSchema=UidPwd|PWD=******|UID=koen_verheyen|User=koen_verheyen|RunAs=koen_verheyen
ecid: 0000Ijcd5UzFw000jzwkno1Clgr10001eK,0:1
ThreadID: 2836335504
HttpCommand: JSONRequestTableColumns
RemoteIP: 10.10.1.15
HttpArgs:Hi,
I am newly using BI publisher . I am using 10.1.3.4.0 . I am just trying to create a report in test name. that is the first step to create a report where i am getting error. I am using default RPD paint , where all the user and Groups are defined .
Maybe you are looking for
-
Getting "Message callback is not set." error in Windows application log. Cause?
I am running a very low volume (3-4 simulaneous users) video chat application on FMS version 4 and am seeing the following error generated from FMS (Core) about once or twice a week. Message callback is not set. Any idea what the cause of this might
-
Photoshop Elements 12 läuft nicht unter Windows 8.1
Ich habe Photoshop Elements 12 auf meinem PC installiert. Mein Betriebssystem ist Windows 8.1. Beim Öffnen von Bilddateien (egal welches Format) erscheinst meistens die Fehlermeldung "Konnte die Zwischenablage nicht importieren, weil ein unerwartetes
-
Details of photo showing up in Develop mode
hi everyone..anyone, i imported images into LR3 and was about to close the catalog when i got a backup reminder popping up on my screen. so i did the obvious thing and clicked Backup. I later opened the catalog to find to my dismay, details of the ea
-
Hi, I have two similar css files and want to have a third version with some properties from one and some from other file. But I do not know how to compare two files in DW. Is there some hint or program? Thanks. reagrds, Natasa
-
I forget my security questions and i want to rest them..?
I forgot my security questions and i want to rest them again