Empty cds.log

Hi,
SAP support ask me to send them Nakisa logs (cds.log). Also they ask to clear file before (to minimize the size and remove info not regarding issue). But, after I backed up current file and cleared it (actually delete cds.log and create empty new one) Nakisa stops logging in it at all. Does anybody know the reason and how to clear cds.log correctly?
(My app is OrgChart 3.0SP2 249, OS where files hosted is HP-UX)
Best regards,
Sergey Aksenov

Hi Sergey,
You need to stop the application and then delete the log file. After deleting it you need to start the application again. To stqrt and stop the application follow these steps:
[http://wiki.sdn.sap.com/wiki/display/ERPHCM/HowtoresetapplicationsintheJava+versions]
Best regards,
Luke

Similar Messages

Error in CDS.log

Hi Nakisa experts,
The CDS.log shows a lot of errors similar to the one shown below, when I navigate through the Org Structure in Nakisa.
Does anyone know where the problem could be?
24/11/2009 11:39: ERROR: CommandProcessor.getDataSet : select HierarchyID,CountValue,CountName,ElementID,CountFieldName from CountsTable where (HierarchyID=Upper('10007236')) and (ElementID=Upper('10007236')) and (HierarchyName=Upper('OrgUnitHierarchy')) and (CountName=Upper('IndirectCount_ChiefPosition'))|DC=CountConnection : Source {System.Data}: Message {The ConnectionString property has not been initialized.}
Thanks,
Vibhu

Hi Vibhu,
That is a database connection issue. Does other data from the database display correctly? If not then Do an IIS reset or test your database connection. If it does then you probably need to enter the database details in the Analytics section in the Configure Staging section of the Admin Console.
I hope that helps.
Luke

Entries in CDS.log file and Org Chart Link

Hello Gurus/Luke/Stephen:
I have a live SAP connection for Org Chart 3.0 (build 5.1.32.1) for Nakisa 2.0. I have correct entries in backend R/3 system and I have right entries in Nakisa (through Admin Console). I have also done HR-OCI configuration. Still I am not able to launch OrgChart - it gives following error "Cannot find the root of OrgChart. The OrgChart box may have been deleted or incorrectly specified". Please find following entries from CDS.log file from server:
( 10/20/2009 11:10 PM:     ERROR: Bapi_Hroci.getDataSetBase() : Exception has been thrown by the target of an invocation. {Inner Exception:[SAPConnector.Open]: Password logon no longer possible - too many failed attempts'
10/20/2009 11:11 PM:     ERROR: Rfc_Read_Table : Source {Nakisa.SAP.Proxy}: Message {[SAPConnector.Open]: Password logon no longer possible - too many failed attempts}
10/20/2009 11:11 PM:     ERROR: SAPRoleMapping_SAP.MapRoles() : Object reference not set to an instance of an object.
10/20/2009 11:11 PM:     ERROR: Bapi_Hroci.getDataSetBase() : Exception has been thrown by the target of an invocation. {Inner Exception:[SAPConnector.Open]: Password logon no longer possible - too many failed attempts')
I do have correct password, so I am not sure what is the issue. Please advise.
Thanks,
Jha

Here are more errors from CDS.log file:
10/22/2009 12:47 AM:     ERROR: SAPRoleMapping_SAP.MapRoles() : Object reference not set to an instance of an object.
10/22/2009 12:47 AM:     ERROR: Bapi_Hroci.getDataSetBase() : Exception has been thrown by the target of an invocation. {Inner Exception:[SAPConnector.Open]: Password logon no longer possible - too many failed attempts'
10/22/2009 12:48 AM:     ERROR: ApplicationConfiguration : getListingDirectory : listing directory: ReportingDirectory does not exist.
10/22/2009 12:48 AM:     ERROR: ApplicationConfiguration : getListingDirectory : listing directory: ReportingDirectory does not exist.
10/22/2009 12:48 AM:     ERROR: ApplicationConfiguration : getListingDirectory : listing directory: DirectoryListing1 does not exist.
Thanks,
jha

OES2 SP3 AFP How to empty AFP log file

Hello All,
i find no information how i can empty the AFP log file in /var/log/afptcpd/afptcp.log. It has grown to 1,2 Gigabyte and is very uncomfortable to look for information in this big file.
Any ideas ?
Thank you
Andreas

If you get a lot of afp activity, your probably best off if you just set the log to rotate.
create a file under /etc/logrotate.d/ and name it whatever you want.
then just enter in something like this:
/var/log/afptcpd/afptcp.log {
compress
dateext
maxage 365
rotate 99
size=+4096k
notifempty
missingok
create 644 root root
postrotate
/etc/init.d/novell-afptcpd reload
endscript
Originally Posted by Skylon5000
Hello All,
i find no information how i can empty the AFP log file in /var/log/afptcpd/afptcp.log. It has grown to 1,2 Gigabyte and is very uncomfortable to look for information in this big file.
Any ideas ?
Thank you
Andreas

HOW TO EMPTY / CLEAR LOG'S IN FOLDER NAME AS " SIS Common Store " ON STORAGE DRIVE

WE ARE USING DRIVE FOR STORE OUR FILES' BUT IN THIS DRIVE 1 FOLDER IS AVAILABE IN HIDE MODE
NAME OF THE FOLDER IS " SIS Common Store " WE REQUIRE TO EMPTY / CLEAR ALL LOG FILES IN THIS FOLDER
TOTAL DRICVE SPACE IS 1 TB BUT SIZE OF "SIS Common Store" FOLDER IS 225 GB , DUE TO THIS FOLDER SIZE WE ARE FACING SPACE SHORT PROBLEM , PLEASE GUIDE HOW TO DELETE / EMPTY / CLEAR THIS LOG'S FILES IN "SIS Common Store"
FOLDER , PLEASE GUIDE / PROVIDE SOLUTION AASAP.
MY NAME IS :RAHUL KALE
MOBILE NO : 9960594241

Hello,
please see here about
http://blogs.technet.com/b/josebda/archive/2008/01/02/the-basics-of-single-instance-storage-sis-in-wss-2003-r2-and-wudss-2003.aspx
http://support.microsoft.com/kb/299726/en-us
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Empty accounting log in ISE

Hi,
I am using ISE1.1.1 with 2960.
Recently I found there is some empty log in accounting report.(see AAA accounting.png)
So I do a sniffer and find out that source IP is the 2960.
Then I got to check the log in "Network Device Log"(See Network device log.png)
I can see the IP address of 2960.
Can anybody know why the log in AAA accouting is empty and how to get rid of them.
Some aaa and radius config in 2960.
aaa new-model
aaa authentication dot1x default group radius
aaa authorization network default group radius
aaa accounting dot1x default start-stop group radius
aaa server radius dynamic-author
client X.X.X.X server-key 7 0XXXXXXX43
aaa session-id common
radius-server attribute 6 on-for-login-auth
radius-server attribute 8 include-in-access-req
radius-server attribute 25 access-request include
radius-server dead-criteria time 5 tries 3
radius-server host X.X.X.X auth-port 1812 acct-port 1813
radius-server key 7 XXXXXXXX500
radius-server vsa send accounting
radius-server vsa send authentication
Thanks.

Hi,
In Cisco ISE to see live failed and passed authentication logs
Operations>authentications>live authentications and then click on detail.
For failed login attempts by administrator.
Monitor > Reports > Catalog > Server Instance > Server Administrator Logins report
For understanding and configuring loggs
Administration > System > Logging

Empty incoming log on a WRT300N v1

My WRT300N has empty incoming and security logs. The outgoing and DCHP logs have information. I have upgraded to the latest firmware on the linksys site.
Is this a problem with the router or can I assume no one is trying to access my machines? It jsut seems to me there should be something in the logs. I have searched the forum and the FAQ's and see nothing about this. The Help file doesn't answer the question. I did find a post about disabling the daylight savings time checkbox and tried this, but it did not work.
would appreciate any information people could offer. Thanks in advance.

Incoming logs will only registered if somebody is trying to access something in your network... like for example if your hosting any of the ff: a VPN, an online game, a file server or if your using a P2P network like Limewire...

Empty ID log from NI-CAN BusMonitor

I am using NI-CAN BusMonitor with a NI USB-8473 to monitor can traffic on my system. The USB CAN is only used for monitoring not part of the system. When I run NI-CAN BusMonitor, I see one line per ArbID and I observe the number of messages incrementing for each Arb ID. But if I try to double click the id while the capture is running, I do not get the ID Log display. If I stop the capture and then double click the Arb ID, the log displays, but it is empty.
I have read the help and it appears that I should see something.
Oh yes I have logging going to a file and the file has all the messages in it, just can't figure out how to properly use the ID log feature.
What am I doing wrong?

Hi, have you seen this article? I hope this helps
Alejandro | Academic Program Engineer | National Instruments

Empty call log!!!!!

I have recently changed from iPhone and am still getting used to android! The call log is always showing empty so unable to see calls. I have read previous forums and I have amended call log to show and it is still showing empty. I imported all my contacts from my iPhone by xperia transfer when.I first had the.phone. Is there any way I can get a call log at all!?!?! Thanks in advance

Hi there.
I was facing the same problem and found some kind of a solution.
I've installed a call log from Google Play (Call Log Monitor, one with a red icon) selected all the log (with the check boxes) and delete the log. On the Phone log it appears a message saying "Call log empty", tried to make a call and the call appeared on the log.
Problem solved, with a little effort.
I think that the problem is with the recover app from Sony, so... DON'T use it
Hope this post can help you all.

Empty fax log?

I received a message on my Officejet Pro 8600 all-in-one that my fax log was full and that I should empty it. How do you do that?

Hi joelrf99
To clear the fax log from the front panel of the printer
1. Touch (right arrow), and then touch Setup.
2. Do one of the following:
• Touch Tools.
- Or -
• Touch Fax Setup, and then touch Fax Tools.
3. Touch Clear Fax Log.
Let me know if you need more help.
I worked on behalf of HP.

Empty/underutilized log files not removed

I have an application that runs the cleaner and the checkpointer explicitly (instead of relying on the database to do it).
Here are the relevant environment settings: je.env.runCheckpointer=false, je.env.runCleaner=false, je.cleaner.minUtilization=5, je.cleaner.expunge=true.
When running the application, I noticed that the few dozen log files have been removed, but later (even the cleaner was executed at regular intervals), no more log files were removed.
I have run the DbSpace utility on the environment and found the following result:
File Size (KB) % Used
00000033 97656 0
00000034 97655 0
00000035 97656 0
00000036 97656 0
00000037 97656 0
00000038 97655 2
00000039 97656 0
0000003a 97656 0
0000003b 97655 0
0000003c 97655 0
0000003d 97655 0
0000003e 97655 0
0000003f 97656 0
00000040 97655 0
00000041 97656 0
00000042 97656 0
00000043 97656 0
00000044 97655 0
00000045 97655 0
00000046 97656 0
This goes on for a long time. I had the database tracing enabled at CONFIG level. Here are the last lines of the log just before the last log file (0x32) is removed:
2009-05-06 08:41:51:111:CDT INFO CleanerRun 49 on file 0x30 begins backlog=2
2009-05-06 08:41:52:181:CDT SEVERE CleanerRun 49 on file 0x30 invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=206347 nINsObsolete=6365 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=199971 nLNsCleaned=0 nLNsDead=0 nLNsMigrated=0 nLNsMarked=0 nLNQueueHits=0 nLNsLocked=0
2009-05-06 08:41:52:182:CDT INFO CleanerRun 50 on file 0x31 begins backlog=1
2009-05-06 08:41:53:223:CDT SEVERE CleanerRun 50 on file 0x31 invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=205475 nINsObsolete=6319 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=199144 nLNsCleaned=0 nLNsDead=0 nLNsMigrated=0 nLNsMarked=0 nLNQueueHits=0 nLNsLocked=0
2009-05-06 08:41:53:224:CDT INFO CleanerRun 51 on file 0x32 begins backlog=0
2009-05-06 08:41:54:292:CDT SEVERE CleanerRun 51 on file 0x32 invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=205197 nINsObsolete=6292 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=198893 nLNsCleaned=0 nLNsDead=0 nLNsMigrated=0 nLNsMarked=0 nLNQueueHits=0 nLNsLocked=0
2009-05-06 08:42:24:300:CDT INFO CleanerRun 52 on file 0x33 begins backlog=1
2009-05-06 08:42:24:546:CDT CONFIG Checkpoint 963: source=api success=true nFullINFlushThisRun=13 nDeltaINFlushThisRun=0
2009-05-06 08:42:24:931:CDT SEVERE Cleaner deleted file 0x32
2009-05-06 08:42:24:938:CDT SEVERE Cleaner deleted file 0x31
2009-05-06 08:42:24:946:CDT SEVERE Cleaner deleted file 0x30
Here are a few log lines right after the last log message with cleaner deletion (until the next checkpoint):
2009-05-06 08:42:25:339:CDT SEVERE CleanerRun 52 on file 0x33 invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=204164 nINsObsolete=6277 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=197865 nLNsCleaned=11 nLNsDead=0 nLNsMigrated=0 nLNsMarked=11 nLNQueueHits=9 nLNsLocked=0
2009-05-06 08:42:25:340:CDT INFO CleanerRun 53 on file 0x34 begins backlog=0
2009-05-06 08:42:26:284:CDT SEVERE CleanerRun 53 on file 0x34 invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=203386 nINsObsolete=6281 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=197091 nLNsCleaned=2 nLNsDead=2 nLNsMigrated=0 nLNsMarked=0 nLNQueueHits=0 nLNsLocked=0
2009-05-06 08:42:56:290:CDT INFO CleanerRun 54 on file 0x35 begins backlog=4
2009-05-06 08:42:57:252:CDT SEVERE CleanerRun 54 on file 0x35 invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=205497 nINsObsolete=6312 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=199164 nLNsCleaned=10 nLNsDead=3 nLNsMigrated=0 nLNsMarked=7 nLNQueueHits=6 nLNsLocked=0
2009-05-06 08:42:57:253:CDT INFO CleanerRun 55 on file 0x39 begins backlog=4
2009-05-06 08:42:58:097:CDT SEVERE CleanerRun 55 on file 0x39 invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=204553 nINsObsolete=6301 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=198238 nLNsCleaned=2 nLNsDead=0 nLNsMigrated=0 nLNsMarked=2 nLNQueueHits=1 nLNsLocked=0
2009-05-06 08:42:58:098:CDT INFO CleanerRun 56 on file 0x3a begins backlog=3
2009-05-06 08:42:59:261:CDT SEVERE CleanerRun 56 on file 0x3a invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=204867 nINsObsolete=6270 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=198586 nLNsCleaned=0 nLNsDead=0 nLNsMigrated=0 nLNsMarked=0 nLNQueueHits=0 nLNsLocked=0
2009-05-06 08:42:59:262:CDT INFO CleanerRun 57 on file 0x36 begins backlog=2
2009-05-06 08:43:02:185:CDT SEVERE CleanerRun 57 on file 0x36 invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=206158 nINsObsolete=6359 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=199786 nLNsCleaned=0 nLNsDead=0 nLNsMigrated=0 nLNsMarked=0 nLNQueueHits=0 nLNsLocked=0
2009-05-06 08:43:02:186:CDT INFO CleanerRun 58 on file 0x37 begins backlog=2
2009-05-06 08:43:03:243:CDT SEVERE CleanerRun 58 on file 0x37 invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=206160 nINsObsolete=6331 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=199817 nLNsCleaned=0 nLNsDead=0 nLNsMigrated=0 nLNsMarked=0 nLNQueueHits=0 nLNsLocked=0
2009-05-06 08:43:03:244:CDT INFO CleanerRun 59 on file 0x3b begins backlog=1
2009-05-06 08:43:04:000:CDT SEVERE CleanerRun 59 on file 0x3b invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=206576 nINsObsolete=6385 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=200179 nLNsCleaned=0 nLNsDead=0 nLNsMigrated=0 nLNsMarked=0 nLNQueueHits=0 nLNsLocked=0
2009-05-06 08:43:04:001:CDT INFO CleanerRun 60 on file 0x38 begins backlog=0
2009-05-06 08:43:08:180:CDT SEVERE CleanerRun 60 on file 0x38 invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=205460 nINsObsolete=6324 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=194125 nLNsCleaned=4999 nLNsDead=0 nLNsMigrated=0 nLNsMarked=0 nLNQueueHits=0 nLNsLocked=4999
2009-05-06 08:43:08:224:CDT INFO CleanerRun 61 on file 0x3c begins backlog=0
2009-05-06 08:43:09:099:CDT SEVERE CleanerRun 61 on file 0x3c invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=206589 nINsObsolete=6343 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=200235 nLNsCleaned=0 nLNsDead=0 nLNsMigrated=0 nLNsMarked=0 nLNQueueHits=0 nLNsLocked=0
2009-05-06 08:43:24:548:CDT CONFIG Checkpoint 964: source=api success=true nFullINFlushThisRun=12 nDeltaINFlushThisRun=0
I could not see anything fundamentally different between the log messages when log files were removed and when they were not. The DbSpace utility confirmed that there are plenty of log files under the minimum utilization, so I can't quite explain while the log file removal stopped all of a sudden.
Any help would be appreciated (JE version: 3.3.75).

Hi Bertold,
My first guess is that one or more transactions have accidentally not been ended (committed or aborted), or cursors not closed.
A clue is the nLNsLocked=4999 in the second set of trace messages. This means that 4999 records were locked by your application and were unable to be migrated by the cleaner. The cleaner will wait until these record locks are released before deleting any log files. Records locks are held by transactions and cursors.
If this doesn't ring a bell and you need to look further, one thing you can do is print the EnvironmentStats periodically (System.out.println(Environment.getStats(null))). Take a look at the nPendingLNsProcessed and nPendingLNsLocked. The former is the number of records the cleaner attempts to migrate because they were locked earlier. The latter is the number that are still locked and cannot be migrated.
--mark

Empty console.log

We have a 10.6.7 server, originally installed somewhere in 2009. After doing some diagnostics research today I noticed several things:
/Library/Logs/Console/$user/console.log hasn't been updated since 2009.
There's no asl.db in /private/var/log , however it does live in /private/var.
Syslog was also broken, though I got it working with the default syslog.conf and restarting the daemon.
I understand the logging services changed a lot since 10.4, so what's the current correct information:
Is console.log supposed to work, and what kind of logs is it supposed to contain?
Is my asl.db where it's supposed to be? Is it indicative of a problem?

Are you sure the support rep realizes you're on Mac OS X?
It's not uncommon for different OS versions to store logs in different places, so he might have thought you were on some Linux or other UNIX environment. As far as I recall there's never been a per-user console log.
The closest thing I can think of is the system log (/var/log/system.log on Mac OS X but could be different on other OSes).
The alternative is that this isn't a system-level log, but it's application-specific, in which case I wouldn't know about it unless I had the same app installed.
The last option I can think of is that if this is a per-user log (as your path name implies) it would generally be stored in the user's own Log directory at ~/Library/Logs/ but even then I don't see a console.log OMM.
At this point I think your only option is to go back to the support guy to ask for more detail.
As for where you learn/find this stuff, experience counts, as well as a willingness to explore.
There is a lot of commonality across various UNIX/Linux flavors, so many online resources can provide a hint, just be aware that each OS is a little different so don't be surprised/annoyed when someone says a log file should be in one place but Apple put it somewhere else.
Apple provide a lot of hints about their specific impementation in their developer programs, but don't publicise as much for mere mortals. Just to compound the issue, things change between OS versions (usually with no peon-level documentation or explanation) as is the case with the ASL logging moving from text-based to binary.
My advice: poke around and see. There's no danger or risk to just looking.

OrgModeler - cds.log error SettingsResources does not exist

Hi experts,
Has anyone encountered this error message before?
ERROR com.nakisa.Logger - Strings : readFile : java.io.FileNotFoundException: File '/usr/sap/NKD/J00/j2ee/cluster/apps/Nakisa/OrgModeler/servlet_jsp/OrgModeler/root/.system/Admin_Config/.system/SettingsResources' does not exist
ERROR com.nakisa.Logger - java.io.FileNotFoundException: File '/usr/sap/NKD/J00/j2ee/cluster/apps/Nakisa/OrgModeler/servlet_jsp/OrgModeler/root/.system/Admin_Config/.system/SettingsResources' does not exist
Thanks,
L

Hi L,
What is the problem that you get? This could be a dummy error, as there should never be a .system folder in the Admin_Config folder. If you don't have a build called .system then you should ignore it. Preferably you should remove any folder called .system inside the Admin_Config folder since it is a bug that creates it.
Best regards,
Luke

Message-Mapping Problem with empty queue while testing

Hello,
I want to develope an mapping to an BMEcat-structure. This mapping should be an filter.
My problem is, that everytime I want to check, if my mapping works correct, the queues for the proccessing steps keeps empty.
I filled a test case with all data I needed for the step I want to test (not the whole mapping is ready, but for this step, it is). Now I go to my mapping step an check the queue for the parameters and the queue comes up and displays the correct values. In next step I want to display the queue of an "equalsS"-Step, but this queue keeps empty as all following queues too. Sometimes there is coming up an empty "Processing log"-window.
The problem only comes up, if the target-message is a BMEcat-Structure.
Have you any solution for this behaviour? Or do you need more informations?
Here you can find some Screenshots:
http://www.gothsite.de/sapscreen/ScreenShot00113.jpg
http://www.gothsite.de/sapscreen/ScreenShot00114.jpg
http://www.gothsite.de/sapscreen/ScreenShot00115.jpg
http://www.gothsite.de/sapscreen/ScreenShot00116.jpg
http://www.gothsite.de/sapscreen/ScreenShot00117.jpg
Edited by: Dirk Koch on Feb 6, 2008 12:00 PM

Hello,
thank you for your tip, but the main problem is still existing. As you can see in the next screenshots, I build in your code and I'm sure it normally works fine. Also I filled the "have to"-Fields in the strukture, so that the check-function (F7) delivers an all right.
But still I get no queue results.
http://www.gothsite.de/sapscreen/ScreenShot00118.jpg
http://www.gothsite.de/sapscreen/ScreenShot00119.jpg
For tests you can take these informations:
http://www.gothsite.de/sapscreen/Z_RFC_EAN_CHECK_resp.xsd
http://www.gothsite.de/sapscreen/bmecat_2005_XSDs.zip
Edited by: Dirk Koch on Feb 6, 2008 12:56 PM

Oracle 8.0.6 replication - Mlog file in the master does not empty

Data in the log file in the master database does not deleted after the refresh job successfully completed for this table. I also tried the Complete refresh table. this but the log file still is not empty. All records in master table replicated to this remote site fine. What must I do to empty this log file, since it keeps on growing. Please help.

One Mlog could be used by many snapshots (mviews)
This select:
SELECT sl.log_owner,
sl.master,
sl.log_table,
rs.owner,
rs.name,
rs.snapshot_site
FROM sys.dba_snapshot_logs sl
JOIN sys.dba_registered_snapshots rs ON rs.snapshot_id = sl.snapshot_id
select all mlog and associated snapshots (mviews).
Check for your one, how many snapshots are there.
Do refresh for all snapshots and mlog must be empty if there are no modificatiion of master table.

Empty cds.log

Similar Messages

Maybe you are looking for