Empty fields in the approval step - process an forms
Hi experts
Am developing process for add address infotype to employee , if i didn't use workflow its working fine, but if i use workflow , when i fill the form and send it , the next agent get empty data, i mean what i entered not appear to him
even i try to run the workitem from design time , i get the same
please any one have idea what is the problem
Regards
Ghadeer
You can also check if the note 1882770 - Form fields not getting populated in FPM forms is implemented.
Similar Messages
-
How can I automate the multi-step process of looking up a caller's contact details when a telephone call comes in with caller ID. I want to be able to see more than just the first & last name when a client calls me. I would like the caller ID to pull up the same information that shows up when you search for and find a contact name and then click on the right arrow.
My workaround is to force/enter both the last name and the address in the last name field since then the address will show up.
The only computerized way to look up this additional information is to put the client on hold, memorize the first and last name and correctly enter it in the search field of the contact database and hopefully find it before the client gets tired of waiting.
Note that I go to about 48 small jobs per week. So far I have about 9,000 contacts. It's easy to make a mistake and have the client wondering what I'm doing and what's taking so long.
The second workaround is to use paper and pencil and ask the client for name, address, cross street and phone number again, repeating what I did some time previously.
Please help meautomate this process.You don't have to put anyone on hold. When the call comes in, tap the Home button, then tap contacts, go to the contact. Tap Home button when finished, tap the top banner to return to the call screen.
-
Page not found or displayed in the approve step
Hi all
when i am performing the approve step then i am able to do the mark as approved step. but there is no stop button is displayed for me when the approver wants to stop the task after marking as approved.
how to gets displayed the stop button in the UWL task. is there anything required to assign permissions??
Thanks
Regards
SunilHi Sunil,
when i am performing the approve step then i am able to do the mark as approved step. but there is no stop button is displayed for me when the approver wants to stop the task after marking as approved.
how to gets displayed the stop button in the UWL task. is there anything required to assign permissions??
According to me,
You need to click on the Next Step. The Workflow will automatically reach the Stop step. It will not show as a button to be clicked. Go to the UWL and check the status of the Workflow. Hopefully you will find it as Stopped.
Hope it helps.
*Please reward points if helpful.
Thanks and Regards
Nitin Jain -
ORA-2001:The approver group Process MFG Approvals has dynamic query in wron
ERROR ORA-2001:The approver group Process MFG Approvals has dynamic query in
wrong format in 11i
We are setting up the Approver Group 'Process MFG
Approvals" using a dynamic query, like:
SELECT PAPF.EMPLOYEE_NUMBER
FROM PER_ALL_PEOPLE_F PAPF,
fnd_lookup_values FLV
WHERE FLV.MEANING=PAPF.EMPLOYEE_NUMBER
AND lookup_type='SUG_SAMPLE_NOTIFICATION'
AND SYSDATE BETWEEN papf.effective_start_date AND papf.effective_end_date
AND FLV.LOOKUP_CODE= (SELECT GME.PLANT_CODE FROM GME_BATCH_HEADER GME WHERE
GME.BATCH_ID=:transactionId)
- Above query is passing the validation action from within the setup screen.
- However, when this approver group is being invoked via Sample Creation
workflow, there is following error raised:
ORA-20001:The approver group Process MFG Approvals has dynamic query in
wrong format
More, if user is trying to use a more simple query like:
select distinct person_id from PER_ALL_PEOPLE_F where full_name = 'Mr.
Oliverking G' we are getting same error
Any idea, plse, would be gretaly apprciated.
txs
PeterHi,
You need to prefix the value with a text string which indicates what kind of value you are returning.
E.g. if you are returning a user ID, prefix the value with 'user_id:'; if you are returning a person ID, then prefix it with 'person_id:'
There is an article on my blog about creating a dynamic approval group in AME as part 5 in the series on AME: http://www.workflowfaq.com/ame-part-five-defining-a-dynamic-approval-group
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://www.workflowfaq.com/blog ?
WorkflowFAQ support forum: http://forum.workflowfaq.com -
How do I update Adobe as per my previous question. I have followed the 3 step process. Step one and Two fine but step 3 just directs me to purchase and application. I want the "Free" upgrade. How do I get It. ????????
YouTube does not use Adobe Reader. Videos do not use Adobe Reader.
Adobe Reader is used only to show files in a special format called "PDF".
What you are having problems with is probably Adobe Flash Player.
So, if you are trying to solve problems with Adobe Flash Player by downloading Adobe Reader, or even Adobe Acrobat, it isn't going to help you in the end. Is that what is happening (we can't really tell without screen pictures, but it seems a likely guess). -
Want to become OCM. what is the total steps/process to become OCM ?
I am having OCP certification for 9i,10g and 11g.
Now I want to appear for OCM then which exams I need to cleared and what are the possible ways for the same ?
Thanks
ShefaliIf you are an OCP, then there is only one exam required to become an OCM. It is a two-day hands-on exam that is given only a few times a year in any given country. The link to the schedule is below. In addition to the test requirement, you must complete two advanced hands-on courses (eligible courses in link below):
The two steps then are take the courses (submitting the courses to Oracle Education as part of this step) and then take (and pass) the test. You can so these in either order.
Eligible advanced courses (scroll down to "These Advanced or Specialty courses meet the Hands On Course Requirements for either OCP or OCM-Level certifications.")
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=244
OCM 11G Schedule
http://education.oracle.co.uk/html/oracle/28US/SCHED_SP_OCM11_2.htm
OCM exam link:
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_exam_id=11gOCM -
Unable to get the Approve option in Salary form
hi friends,
we are implementing payroll using UAE localisation, when i try to add new salary for an employee i am unable to get the approve option in the salary form..we are working on version 11.5.10.2..i have the given the setup steps below
HRMS Responsibility>People>assignment>salary >add New Salary..
I have attached the function the" Salary Approval" to the menu also..even we have bounsed the apache server also...still we face the same problem we are unable toget the approve option still we can see only the proposed optionand we are unable to enter the new salary for the employees...
Pleae advise your better openions to over come this..
Thanks and Regards
RajHi Ambarish,
There will be an option to disable and enable the print icon for a particular sap screen . SAP Screen has been designed as per business requirement only . You may reach out to your functional team or developer team to assign the required output type and form which can enable the icon .
Also check whether you have required authorization to print from SAP
I hope so it will help you
Regards,
Aparna -
Hi All,
I was wondering if anyone could help me with a HFM security issue on HFM 11.1.2.3 we are facing please?
The problem is that a user can by-pass the journal approval stage and post directly after submitting if Custom4 access control=All is selected.
If any of the other access controls (None, Read, Promote) for custom 4 are selected, the first two steps of the process are possible -
input and approval of the journal are possible but final posting of the journal is not and returns an error that says:
"User does not have the access right to perform this journal task"
The options I have thought for a workaround are as follows:
1. 1. Set up a 3rd user called data poster and remove submit journal role from user 1 (data inputter)
2. 2. Put in place process control and use the various review levels (could be quite time consuming given there is no time left for development)
Have anyone experienced this before and come up with a quick way of resolving this please? It would be very much appreciated.
We have two types of users who are associated with groups in HFM and have the appropriate roles assigned to them to complete their tasks,
they are:
1. A data Inputter (who inputs base data and journals, who has access to create and submit journals)
2. 2. A data reviewer (who approves journals)
The process is as follows:
1. 1. Logon as Data inputter to submit the journals
2. 2. Logon as Data reviewer to approve the journals
3. 3. Logon as Data inputter to post the Journals
We are using the custom 4 member to identify different adjustment types. At the moment we are able to set it up in such a way whereby Steps 1 and 2 can be completed
but once it comes back to step 3, we get an error as follows:
"User does not have the access right to perform this journal task"
(This error comes about when the access control on custom 4 is set to None, Read, Promote)
Custom 4 Access Rights looks as follows:
C4_ADJ01
C4_ADJ02
C4_ADJ03
C4_ADJ04
HFMDefault
Read
Read
Read
Read
HFMLoad
All
Promote
None
Read
HFMReview
Read
All
All
All
When Custom 4=C4_ADJ01 all 3 steps can be completed but it by-passes step 2 (journal approval).
For all other Custom 4 we complete steps 1 and 2 successfully but not step 3 due to access issues.
Roles for the groups that users assigned look like the following:
Test User Name
Test User Name
Access Rights
1
Base Data input/Journal Data input
test_HFMLoad
Reviewer 1
Review Supervisor
Create Journals
Read Journals
Database Management
Enable write back in Web Grid
Load Excel Data
Generate Recurring
Post Journals
Create Unbalanced Journals
Manage Templates
Data Form Write Back from Excel
Consolidate
2
Data Reviewer
test_HFMReview
Reviewer 1
Review Supervisor
Create Journals
Read Journals
Database Management
Approve Journals
Consolidate
Reviewer 2
Generate Recurring
Manage Templates
Create Unbalanced Journals
Any help or advice would be much appreciated.
Thanks in advance,
M.Hi All,
I was wondering if anyone could help me with a HFM security issue on HFM 11.1.2.3 we are facing please?
The problem is that a user can by-pass the journal approval stage and post directly after submitting if Custom4 access control=All is selected.
If any of the other access controls (None, Read, Promote) for custom 4 are selected, the first two steps of the process are possible -
input and approval of the journal are possible but final posting of the journal is not and returns an error that says:
"User does not have the access right to perform this journal task"
The options I have thought for a workaround are as follows:
1. 1. Set up a 3rd user called data poster and remove submit journal role from user 1 (data inputter)
2. 2. Put in place process control and use the various review levels (could be quite time consuming given there is no time left for development)
Have anyone experienced this before and come up with a quick way of resolving this please? It would be very much appreciated.
We have two types of users who are associated with groups in HFM and have the appropriate roles assigned to them to complete their tasks,
they are:
1. A data Inputter (who inputs base data and journals, who has access to create and submit journals)
2. 2. A data reviewer (who approves journals)
The process is as follows:
1. 1. Logon as Data inputter to submit the journals
2. 2. Logon as Data reviewer to approve the journals
3. 3. Logon as Data inputter to post the Journals
We are using the custom 4 member to identify different adjustment types. At the moment we are able to set it up in such a way whereby Steps 1 and 2 can be completed
but once it comes back to step 3, we get an error as follows:
"User does not have the access right to perform this journal task"
(This error comes about when the access control on custom 4 is set to None, Read, Promote)
Custom 4 Access Rights looks as follows:
C4_ADJ01
C4_ADJ02
C4_ADJ03
C4_ADJ04
HFMDefault
Read
Read
Read
Read
HFMLoad
All
Promote
None
Read
HFMReview
Read
All
All
All
When Custom 4=C4_ADJ01 all 3 steps can be completed but it by-passes step 2 (journal approval).
For all other Custom 4 we complete steps 1 and 2 successfully but not step 3 due to access issues.
Roles for the groups that users assigned look like the following:
Test User Name
Test User Name
Access Rights
1
Base Data input/Journal Data input
test_HFMLoad
Reviewer 1
Review Supervisor
Create Journals
Read Journals
Database Management
Enable write back in Web Grid
Load Excel Data
Generate Recurring
Post Journals
Create Unbalanced Journals
Manage Templates
Data Form Write Back from Excel
Consolidate
2
Data Reviewer
test_HFMReview
Reviewer 1
Review Supervisor
Create Journals
Read Journals
Database Management
Approve Journals
Consolidate
Reviewer 2
Generate Recurring
Manage Templates
Create Unbalanced Journals
Any help or advice would be much appreciated.
Thanks in advance,
M. -
What should be specified in object reference field in the first step of sequence file in test stand
Test stand object Reference field- <The expression cannot be empty>
It is showing an error like "The .Net property can not be accessible
Object Reference not set to an instance of an object".
How it can be resolved?
Attachments:
ex1.jpg 2305 KBI am
using Singleton Class in .Net. So I need not create object in TestStand. The Get
property of the class will return its own class object. So the Class Reference
should be empty only.
When I
choose the property manually, I am getting this error. This I am getting only
when I create this step through C# TestStand APIs. Please help me to remove this
error in the Class Reference field using TestStand
APIs.
Attachments:
ex2.jpg 24 KB -
Changing PO in the approval step
Hi,
I need to change a PO object when the aprover is aproving it. For that I have implemented the BBP_DOC_CHANGE_BADI to change the PO. This BADI it's called not only when the object is approved but also every time the object is changed.
I need to clearly identify the moment when the object is being approved. We are using SRM 7.0 and Classic extended scenario. Does anyone have ideas about this?
Thanks
Paulo Paixão
Edited by: Paulo Paixão on Sep 11, 2009 7:27 PMHi Masa,
Thanks for the answer.
The IV_MODE is set do 'X' when you are approving but when you are changing it´s also set to 'X'. So I can not use de IV_MODE.
Thanks
PP -
SQL loader for empty field at the end of the line
Hi,
I have following data file for sql loader. I am using Oracle 11.2. The table structure is table_a(id number, name varchar2(32), nbr number).
1, zzzz, 123
2, bbb,
3, ccc, 33
4, ddd,
Currently, I am using "TERMINATED BY ',' " in the control file for SQL loader. However row2 and row4 were thrown into the bad file. Any suggestion for me to load row2 and row4 into the table as well?
Thanks,Two of three columns in your table are named with reserved words.
My first suggestion is to run this query:
SELECT keyword
FROM v$reserved_words
ORDER BY 1;My second suggestion is that your read the FAQ and learn how to use tags to post listings to these forums so we can read what you post.
My third suggestion is that you go to my SQL*Loader Demos page of my website:
http://www.morganslibrary.org/reference/sqlloader.html
and look up "TRAILING NULLCOLS." -
Selecting just text fields throughout the entire document when editing forms in Acrobat Pro XI
I edit PDF's all day and it is seriously time consuming to edit the properties of text fields when you can only select a few at a time due to other elements (checkboxes, radio buttons etc.) prohibiting you from simply "Selecting All" elements and editing them all at once. I do not want to change the Appearance properties of all elements, just all of one type throughout the document. Is there a way to do this?
Long story short I would like to just edit all text fields at once, then all checkboxes at once etc.
Thanks for you time!
SeanIn the form edit mode, one can order the display of the fields by "name" or "tab order".
If I sort the fields by name order and then use the control key and left mouse button, I can select various field names and the right mouse click brings up the context menu and I can then select the "Properties" option and I now have the 5 tabs for the common properties for the selected fields. I believe using the control key and the left mouse button is the usual method for selecting specific items in a window listing. -
How do I exempt a FIELD from the TAB ORDER on a form
How do I make a field NOT part of the TAB ORDER? In other words, you can Tab around the page but you will never select this object. I want to create a text message that will show on the screen only but is not a field for editing.
If this is in the "help" and I've missed it, sorry. I couldn't find anything about this.
Thanks.I have a form that I created with the save, print, etc buttons. I created mine as text fields rather then buttons and under Common Properties I have the Form Field set as Visible But Does Not Print, and then of course it's set under Actions to Execute a Menu Command. That does show up in the tab panel, however if you close the form editing and then go through the tab order of the form it skips right over it. The downside to this is that you have to have the Select tool in order to click and there is no mouse over, it's just a cursor like it would be in any other text field.
This is the only solution that I have found that somehow works for this. -
Combining two form fields from the same document, into one form field?
I have a field called "first name" and one called "last name". How do I create a third field called "full name". I want it to just combine the first two. Any ideas?
In the field's calculation tab (under Custom Calculation), enter:
event.value = this.getField("first name").value + " " + this.getField("last name").value
Message was edited by: try67
Forgot to paste a part of the code... -
Display empty fields in between the output, urgent
hi
i need to display some empty fields in the output txt file, in between teh normal database fields i am displaying
for eg if first field is f1 (1-10)
second is f2 (11-35)
third field is empty i need todisplay as (12-45)
and again f4 as (13-60) so on
such there are multiple fields in between dattabase field which just needs to be displayed as empty only and all fields should be seperated by space as showni above eg
regards
aroraclosed got solution
Maybe you are looking for
-
Can't sign into or out of Creative Cloud
About a month ago I downloaded the free trial of Photoshop with Creative Cloud. Some days ago, I bought a subscription for Photoshop. When I open Photoshop, I keep getting the small screen, telling me, my free trial is running out soon. I if try to l
-
Playing a clip in FCE while transcribing text in Word
or other word processing software. How do you accomplish that? When I click outside of FCE the playhead stops. I'm trying to transcribe some interviews. Is there a better way?
-
Saved jpg image has magenta hue in browser - help please
Hi, folks: [running photoshop cs3 under windows XP Pro/SP2] I've been saving jpg files for years with no problems. Now I have one that has me stumped! I have a psd file with about 14 layers, a few of which are hidden. I merge layers and then save as
-
Refresh Grouped AdvancedDataGrid
I've been fiddling with the new AdvancedDataGrid for Flex 3 and it does wonders. One of its features most beneficial to me is the ability to group rows of data based on some field (column) value. If you don't understand what I'm talking about check o
-
Why can't I share my iPod touch app with my new IPadmini
Just got a new IPad mini but cannot share a purchased game from IPad touch to IPad mini?