"empty file" error with CS5, linux server and mavericks

hello to the community,
i'm the owner of a small online marketing agency.
we have been using different macs here since 10.6. until mavericks with adobe CS 5 and a linux server for years.
today i got a new MBP retina with mavericks and since now i have the following problem:
- when i try to open a photoshop file on the server i get a "file is empty" error, when i open an illustrator file on the server illustrator crashes und when i open a pdf on the server with acrobat pro there comes a message that the file is corrupt. with acrobat reader i can open it.
- i can open the exact files with all apps when they are on a local storage not an the server
- i can open all files on the server with another mac with os x 10.6.
so there must be a problem with the combination cs5-files, server and os 10.9. it's weird because with my old MBP i with also using mavericks and there was no problem.
can anyone help me? it's really a problem!

i found a workaround that seems to work!
instead of connecting to the server with "smb" i connect with "cifs". so i force mavericks to connect using the old smb 1 instead of the buggy smb 2.

Similar Messages

Am trying to download itunes as it has previously deleted during an update, and it comes up during the installation that there is a file error with my resources

Am trying to download itunes as it has previously deleted during an update, and it comes up during the installation that there is a file error with my resources

That's perfect, thanks.
error writing to file: C:\Program
files\ i tunes\ i tunes.Resources\ja.lproj\AppleTVStream
itxib. Verify that you have access to that directory
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Deployment Manager Error with Oracle Weblogic Server 10.3.1

I have installed Identity Manager 9.1.0.2 (patch upgraded from 9.1.0.1) on OEL 5.3 64bit and Weblogic 10.3.1
Database:Oracle 11gR2 (remote machine).
**I am aware that IM 9.1.0.2 is not certified on Weblogic 10.3.1 (it is only certified on 10.3),
The installation was successful and OIManager is up and running. Able to create Users, Resources etc. as well.
As part of configuring OIM Connectors tried to Import .xml file using Import option from Deployment Management section as below and the following error was displayed.
"Either your session timed out or you are trying to access a page without logging in".
Did all workarounds like enabling java, changing browsers, restarting machine etc as per the below discussion but in vain.
Deployment Manager Error with Oracle Weblogic Server
Can any one suggest any workaround or solution for this problem.
Or atleast can any one confirm there is no Identity manager available on this date which is compatible with 10.3.1? and cannot be continued further.
Thanks in Advance
Sudheer
Edited by: SudheerPrabhala on Oct 20, 2009 1:26 AM

You are facing this issue because you're using a non certified combination.
Other folks who tried to use OIM in 10.3.1 ended up in the same problem you're facing.

Communication error with the opmn server local port

Working on 64-bit R12.0.6 on AIX 5L
Application services are not being started properly. They are being started with status 2(sometimes with 4).
Autocinfig is being successfully completed.
Please help me how I can get rid of this error. Following are some of the environment setting details:
ons.conf
nodes=appaix02.us.oracle.com:15007
opmn.xml
<opmn xmlns="http://www.oracle.com/ias-instance">
<notification-server>
<port local="15006" remote="15007" request="15005"/>
opmn.log
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
ons.log
07/01/11 13:12:02 [4] ONS server initiated
07/01/11 13:12:52 [4] Logging disabled
07/01/11 13:12:53 [4] ONS server initiated
07/01/11 13:13:04 [4] Logging disabled
07/01/11 13:13:04 [4] ONS server initiated
07/01/11 13:13:17 [4] Logging disabled
07/01/11 13:13:28 [4] ONS server initiated
07/01/11 13:13:40 [4] Logging disabled
07/01/11 13:13:41 [4] ONS server initiated
07/01/11 13:14:20 [4] Logging disabled
07/01/11 13:14:21 [4] ONS server initiated
07/01/11 13:14:29 [4] Logging disabled
07/01/11 13:14:29 [4] ONS server initiated
07/01/11 13:14:34 [4] Logging disabled
07/01/11 13:14:34 [4] ONS server initiated
07/01/11 13:15:53 [4] Logging disabled
adopmnctl.txt
10/08/10-23:30:43 :: adopmnctl.sh version 120.4.12000000.3
10/08/10-23:30:43 :: adopmnctl.sh: Stopping Oracle Process Manager (OPMN) and t
he managed processes
opmnctl: stopping opmn and all managed processes...
10/09/10-11:13:41 :: adopmnctl.sh version 120.4.12000000.3
10/09/10-11:13:41 :: adopmnctl.sh: Starting Oracle Process Manager (OPMN)
opmnctl: opmn start failed.
10/09/10-11:15:09 :: adopmnctl.sh: exiting with status 2
adformsctl.txt
opmnctl: stopping opmn managed processes...
10/09/10-11:18:11 :: adformsctl.sh version 120.12.12000000.5
10/09/10-11:18:11 :: adformsctl.sh: starting OPMN if it is not running
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
opmnctl: opmn start failed.
Please help.

"A point to add"
I just noticed that following message is being continously receiving in the database alert_log:
Sat Oct 9 16:04:52 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:05:32 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:06:30 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:07:10 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:09:35 2010
Incremental checkpoint up to RBA [0x1d.1f9928.0], current log tail at RBA [0x1d.1f9a79.0]
Sat Oct 9 16:11:52 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:29:40 2010
Incremental checkpoint up to RBA [0x1d.1f9b87.0], current log tail at RBA [0x1d.1f9bf4.0]
~
Please help.

TS1843 I am getting the following error messages- No DNS Server and Double SAT. Can anyone walk me through a fix?

Airport Express- No internet connection. I am getting the following error messages- No DNS Server and Double SAT. Can anyone walk me through a fix

Try putting these numbers in Network>TCP/IP>DNS Servers, for the Interface you connect with...
208.67.222.222
208.67.220.220
Then Apply. For 10.5/10.6 Network, highlight Interface>Advanced button>DNS tab>little + icon.
Might also put them in the Airport Express, no idea what Double SAT is!?

Error starting the Application Server and Deployment Tool

After installing the iPlanet Aplication Server with sp3 I get the following
errors starting the Application Server and Deployment Tool.
iAS Application Server
================
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:46:49:8] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
error: could not get context
*** Errors in initialization from registry ***
Errors in initialization, exiting ...
iAS Deployment Tool
===============
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:23:40:7] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
Exception in thread "main" java.lang.NullPointerException
at com.kivasoft.util.Util.loadComponent(Unknown Source)
at
com.iplanet.ias.tools.buzz.ui.application.StartBuzz.initGDS(Unknown Source)
at com.iplanet.ias.tools.buzz.ui.application.StartBuzz.main(Unknown
Source)
Can anyone help me please!

Hi,
Would be more helpful if you can mention, the O/S. Also, pls mention where
you are getting this error, at kjs or kxs, or, are you able to start the server
and at which specific instance do you encounter this.
Regards
Raj
"Antonio Casqueiro" wrote:
After installing the iPlanet Aplication Server with sp3 I get the following
errors starting the Application Server and Deployment Tool.
iAS Application Server
================
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:46:49:8] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
error: could not get context
*** Errors in initialization from registry ***
Errors in initialization, exiting ...
iAS Deployment Tool
===============
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:23:40:7] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
Exception in thread "main" java.lang.NullPointerException
at com.kivasoft.util.Util.loadComponent(Unknown Source)
at
com.iplanet.ias.tools.buzz.ui.application.StartBuzz.initGDS(Unknown Source)
at com.iplanet.ias.tools.buzz.ui.application.StartBuzz.main(Unknown
Source)
Can anyone help me please!

Error starting the Application Server and Deployment Tool in Windows 2000

After installing the iPlanet Aplication Server with sp3 in Windows 2000 I
get the following
errors starting the Application Server and Deployment Tool.
iAS Application Server
================
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:46:49:8] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
error: could not get context
*** Errors in initialization from registry ***
Errors in initialization, exiting ...
iAS Deployment Tool
===============
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:23:40:7] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
Exception in thread "main" java.lang.NullPointerException
at com.kivasoft.util.Util.loadComponent(Unknown Source)
at
com.iplanet.ias.tools.buzz.ui.application.StartBuzz.initGDS(Unknown Source)
at com.iplanet.ias.tools.buzz.ui.application.StartBuzz.main(Unknown
Source)
Can anyone help me please!

Okay, pls check that you are logged in as administrator and installed and now you are logged in as administrator and registering the iAS server. Did you get any installation failures while installing and are you able to register the server using iASAT ?

Airport Utility `install failed' error with both 6.0 and 6.1

Hi folks
I am running Mac OS X Lion 10.7.4 (11E53) and cannot get the Airport Utility to run at all. [5.5.3] The application icon flickers as though it is about to launch and then nothing happens.
I have tried other 5.x downloads and they all fail because I am running OS X Lion 10.7.4.
Doing a standard Software Update or using a download of 6.x from the Apple Support site, the installer comes up with an `install failed' error with both 6.0 and 6.1, having gotten through the complete process and looking like they were `successful'.
It's the only time in two years and many updates later that i have come across this issue, so I am unsure how to start to tackle it.
Any ideas or suggestions please?
Thanks in advance.

Welcome to Apple Communities
Backup your files and try this:
1. Reboot from recovery partition (or as in my case USB recovery drive)
2. Select Re-install Mac OS X
3. Allow the process to run through multiple restarts
4. When reinstall process is complete run software update (side note, my software update would not launch as long as my USB recovery stick was plugged in, weird)
5. Run all updates saving the Airport Utility 6.0 until last.
6. Install the airport utility from software update.

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

Which version of OSX and what email provider are you using.

I created a file in Photoshop CS5 (a photo) and another in Illustrator CS5 (a graph) to place in my InDesign CS5 brochure. When the Photoshop and Illustrator files are placed in InDesign, they look blurry - whether viewed in InDesign, printed, or saved as

I created a file in Photoshop CS5 (a photo) and another in Illustrator CS5 (a graph) to place in my InDesign CS5 brochure. When the Photoshop and Illustrator files are placed in InDesign, they look blurry - whether viewed in InDesign, printed, or saved as a PDF. Can anyone give me some tips on how to fix this? Thanks!

Ask in the program forums
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll

Sign on problems within Elements 10; plus cannot backup writing files error with file catalog.pse10db. No indication what the problem is. How do I get adobe help with these problems?

Sign on problems within Elements 10; plus cannot backup, writing files error with file catalog.pse10db. No indication what the problem is. How do I get adobe help with these problems?

Sign on problems within Elements 10; plus cannot backup, writing files error with file catalog.pse10db. No indication what the problem is. How do I get adobe help with these problems?

Unable to connect hana with sybase replication server and i am not getting ECH plz help

unable to connect hana with sybase replication server and i am not getting ECH plz help

Please don't necrobump/hijack threads: https://wiki.archlinux.org/index.php/Fo … bumping.22
https://wiki.archlinux.org/index.php/Fo … _hijacking
Closing

Error with Title i.d. and password in app builder

Hi;
Ive just subcribed to Pro edition DPS and am starting to build my viewer app, however im getting an error with Title i.d. and password in app builder
It says niether the title id or password are valid, however they are the same as i've used to both log into app builder and to upload my folios to the folio producer.
What am i missing here?
Scott

Yes, the account administration stuff is confusing when you jump from a "creative" account to a Pro account. As the Getting Started guide states, when you set up your Pro account, you should use dedicated Adobe IDs, such as [email protected] and [email protected], not [email protected] The Copy Folio command makes it easy to transfer folios from one account to another, especially if you do it on the same machine you used to create the folios. Everything moves over nicely.
Again, don't use your "master" account for creating and publishing folios. Use it only for account administration.

Does Mountain Lion come with an Apache server and if so how do I access it?

Does Mountain Lion come with an Apache server and if so how do I access it?
On my previous Mac there was a check box for web sharing in the Sharing System Preferences. I used this to experiment with HTML website design. How do I do this on my new Mac?

Thanks for the reply. Others have asked similar questions. I was directed to a user tip page
by etresoftThat gives step by step instructions which should solve my problem.

What is available on new Windows servers that allow you to write scripts that can work directly with Windows, SQL Server, and Exchange Server?

What is available on new Windows servers that allow you to write scripts that can work directly with Windows, SQL Server, and Exchange Server?
a. PowerShell
b. isql
c. osql
d. sqlcmd

All questions seem to be from the interview or a test. I think I even took this test once, it's KForce test.
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

"empty file" error with CS5, linux server and mavericks

Similar Messages

Maybe you are looking for