Empty file is getting generated at Target FTP Folder side

HI all,
I have scenario like Idoc to File In Target FTP folder is empty file is generated, In adapter engine (communication channel) it shows the successfull status and pay load is getting created at Message display tool in the Message ID tab.But FTP server will receive only Empty file.
Please Give me some advise to resolve this issue..
Regards,
satya Tanuku

Hi Satya,
If you are using FCC then troubleshoot using this blog...
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
Regds,
Pinangshuk.

Similar Messages

Empty files are getting created at receiver FTP server

Hi Experts,
I have an Idoc to File scenario where I am sending an XML file to receiver FTP server.
Scenario is working fine but sometimes an empty file is getting generated at receiver FTP server.
I have already selected ignore empty file at receiver channel so issue is not within PI system configuration.
When I checked the message log I can see that almost all the files are getting created successfully without any issues, but
for some files/messages I can see that there are below error logs.
"Transmitting the message to endpoint <local> using connection IDoc_AAE_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Could not get FTP connection from connection pool (1 connections) within 5,000 milliseconds; increase the number of available connections"
"Exception caught by adapter framework: Could not get FTP connection from connection pool (1 connections) within 5,000 milliseconds; increase the number of available connections."
And after there is again success message log in the same message and it creating a file successfully during that time stamp.
but the third party is sometime receiving empty file which I am not able to find in any trace or log (my file name is SD_timestamp.xml).
Can you please let me know what is the solution and what adjustments FTP server need to do in order to resolve this issue.
Thanks in advance.
Regards,
Rahul Kulkarni

The error you are getting that says "Could not get FTP connection from connection pool (1 connections) within 5,000 milliseconds; increase the number of available connections" has probably nothing to do with the empty files problem.
I second Hareesh Gampa that you first should try "temporary file creation". You might also need to tell the FTP owner that he should only pick up files with that are written completely and that do comply with a negotiated file name schema. The temp file should have another schema of course then. He should not pick up just every file that is written. See here for details
http://help.sap.de/saphelp_nw74/helpdata/en/44/6830e67f2a6d12e10000000a1553f6/content.htm
HTH
Cheers
Jens

.css and .swf files are getting generated with Ibot email

Hi Team,
I have an Ibot which use to run on daily basis which contains graph and normal table views, .css and .swf files are getting generated and attached with Ibot email to the users. I'm facing this issue from last two days. Earlier there was no such attachments sent to the users.
Could anybody let me know what might be the reason for that?

any inputs?

Writting attached file from SOAP message to a FTP folder

Hi everybody,
Our scenario is an interface which receives a SOAP message with a file attached. As we don't need to do any mapping into the attachment, we are supposed to deliver that file as it is into a FTP folder.
Our problem is that we cannot find how to configure File comm channel to write the attached file and no the SOAP XML message which is what we are getting now. Any help on this?
Thanks in advance.

Hi
check these forum posts
SOAP with attachments
Mail Sender Adapter - Attachment Handling
Regards
Vishnu

File not getting posted at target directory

Hi all,
I am crearting a simple bypass scenario in which no mapping is involved. I simply have to pick up a file with particular naming convention from the FTP location and write it to other location at the target side with some different naming convention.
The file is getting picked up from the FTP location but is not written at the target location?
Can you please suggest me what could be the reason?
Is there something to do with adapter specific parameters?
Thanks & Regards,
Sachi

Hi,
Are you seeing any for the same then post the same...
at what stage you are stuck at...
is sender adapter picked the file and sent to Integration engine ? check at sender adapter communication channel for logs..
is message success in SXMB_MONI ?
is receiver adapter resulted in error ..then check the logs and post the same if any error there....
Also check the target directory have sufficient privileges for the file operaitons..
HTH
Rajesh

File not getting created in Target Directory..........

Hi All,
We are trying a IDOC-File scenario & trying to create a XML file on the receiver side........All the mappings have been checked & everything is working fine.It shows success in SXMB_MONI. But the file is not getting created at the target directory..... Checked the component Monitoring and message monitoring as well, which is also successful...
What could be the reason of such behaviour, and is there a way to track the where the target file is getting placed?
Please Help
Regards,
Jayashri

>
Jayashri Rade wrote:
> Hi All,
> We are trying a IDOC-File scenario & trying to create a XML file on the receiver side........All the mappings have been checked & everything is working fine.It shows success in SXMB_MONI. But the file is not getting created at the target directory..... Checked the component Monitoring and message monitoring as well, which is also successful...
i
Did you check the receiver communication channel in communication channel monitoring?
Are there any errors?

Dynamic file name while sending to target FTP

Hi Experts,
we have a scenario wherein we are trying to implement dynamic file names.
The scenario is IDOC to file, and we need to append the data corresponding to all the IDOC triggered n a daily basis.
Its like the file abc_01will contain data for day 1(data of oll the IDOC in that day).For day to we need to dynamically name the file as abc_02 and so on.
But before naming the file as abc_02 we need to check if abc01 is present or not .If abc_01 is not present then for day 2 file we need to give the name as abc_01 and so on_.This condition is need to be checked becasue there may be the case that a file may not be picked by the script running at the target system.
can anyone let me know how to check whether file are correctly picked at target.
Regards,
srinivas.

Hi Srinivas,
I think you can achieve this with the next scenario:
- For getting all the Idocs info, you need a ccBPM to collect them, and then, download them to a file.
- To dynamically put the filename, you need to use Dynamic Configuration at the File Receiver Adapter (in the Message Mapping, you can write a UDF.)
- And to check if the daily file exists, you can also write an UDF and then decide the name of the output file.
Hope this helps,
Regards,
Juan

Files not getting picked from the FTP site

Dear All,
We are having one File-XI-RFC scenario running in XI-PRD Server. Sometimes what happens is that files available in the FTP site are not getting picked by the File adapter. I have checked in the adapter monitoring and communication channel is active there. Also, there are no errors regarding this in SXMB_MONI. I have configured alerts also but for this case no alerts are getting trigerred. And also when I am reactivating that particular communication channel then that file is getting picked instantaneously.
Can anybody please guide me on what might be the real cause for this as this error is happening randomly.
regards,
N.Jain.

HI,
Have you used per File transfer parameter in FTP Communication channel.
It makes the FTP adapter inactive in ideal time.
So add the poll interval may be for every 30 mins or something like it. It will forcefully activate the FTP port after every 30 mins. You may have the poll interval for every 1 min. Only the files to be picked up are getting logged in in XI monitoring.
So there will be no garbage collection of unwanted messages in Monitoring.
Thanks
Swarup

PDF File not getting generated - PLEASE HELP

I have a jsp in a portlet from where in I call another jsp to generate a PDF file on the fly. IT is not working I have tried all sorts of stream please help.
Calling JSP (Portlet)
<tr>
<td><netui:anchor href="print.jsp" target="new">Print
</netui:anchor>
</td>
Called JSP, print.jsp:
try {
ServletOutputStream outStream = (ServletOutputStream)response.getOutputStream();
outStream.write("BINARY OUTPUT".getBytes());
outStream.println("PRINTLN OUTPUT--"+request.getParameter("empID"));
outStream.flush();
outStream.close();
} catch {}
As you can see I am just trying to Write some string in the print.jsp
The word opens up but nothing is WRITTEN in it. Have tried all the OutputStreams. Please help why is it not getting printed even if set proper headers.

There are some issues with this PDF file. It's not tagged but even still it has some real problems. I checked the file to see what created it and it was something called "Wine Postscript Driver" and the PDF Producer was "GPL GhostScript 9.10" When you check the file in Preflight then you will begin to understand that this is a poorly created PDF file. Here is a bit of the PDF Syntax report:

PDF files not getting generated

Hi friends,
Through our application we are generating PDF to network location. Suddenly it stoped from last month.
I am not able to trace exact problem. forms version 6i we are using.
PROCEDURE P_PRINT_GRN
                                   (p_type VARCHAR2 default 'P') IS -- Added by Piyush on 09/09/2007 GRN Email CR20
                                   /* p_type value if 'P' then normal Printing if 'M' then generate PDF for email attachment CR20*/
     param_grp ParamList ;
     param_grp_frr ParamList ;
     pl_name VARCHAR2(10) := 'tempdata';
     pl_name2 VARCHAR2(10) := 'tempdata';
     v_backslash VARCHAR2(1) ;
     fopen Text_IO.File_Type; /* File handle for opening the file */
     alt_msgs NUMBER ;
     v_runmode VARCHAR2(80) ;
     v_mch_name parameter_master.value%TYPE;
     v_port_no parameter_master.value%TYPE;
     v_server_name parameter_master.value%TYPE;
     o_usrid           VARCHAR2(6);
     o_password      VARCHAR2(15);
     o_dbname           VARCHAR2(30);
     v_param_check NUMBER;
     v_potype VARCHAR2(20);
     v_path                    VARCHAR(100); -- Added by Piyush on 09/09/2007 to capture path for GRN report PDF File CR20
     v_err                         NUMBER;                -- Added by Piyush on 09/09/2007 Show_Alert CR20
BEGIN
     SELECT NVL(TO_CHAR(po_no), 'VMIPO')
     INTO v_potype
     FROM grn_header
     WHERE GRN_NO = :grn_header.grn_no;
param_grp := Get_Parameter_List(pl_name);
     /* Creates the parameter list if one doesnt exist */
     IF Id_Null(param_grp) THEN
          param_grp := Create_Parameter_List(pl_name);
          IF Id_Null(param_grp) THEN
               Message('Error creating parameter list '||pl_name);
               RAISE Form_Trigger_Failure;
          END IF;
     ELSE
          Destroy_Parameter_List(param_grp);
          param_grp := Create_Parameter_List(pl_name);
     END IF;
/* Adding parameters to Parameter List in order to be passed to called report */
     /* Added (Start) by Piyush on 09/09/2007 GRN Email, Generate PDF CR20*/
     if p_type = 'M' then
          BEGIN
               SELECT value
               INTO v_path
               FROM parameter_master
               WHERE type_code = 16
               AND value_code = 6;
          EXCEPTION
               WHEN NO_DATA_FOUND THEN
                    SET_ALERT_PROPERTY('ALT_ERROR', alert_message_text, 'Reports Path parameter does not exists in Parameter Master.');
                    v_err := SHOW_ALERT('ALT_ERROR');
                    RAISE FORM_TRIGGER_FAILURE;
               WHEN OTHERS THEN
                    SET_ALERT_PROPERTY('ALT_ERROR', alert_message_text, substr(error_text,1,100));
                    v_err := SHOW_ALERT('ALT_ERROR');
                    RAISE FORM_TRIGGER_FAILURE;
          END;
          ADD_PARAMETER(param_grp, 'P_DESTYPE', TEXT_PARAMETER, 'FILE');
          ADD_PARAMETER(param_grp, 'P_DESNAME', TEXT_PARAMETER, v_path || 'GRN_' || :grn_header.grn_no || '.pdf');
          ADD_PARAMETER(param_grp, 'P_DESFORMAT', TEXT_PARAMETER, 'PDF');
     ELSE
          ADD_PARAMETER( param_grp , 'P_DESTYPE' ,TEXT_PARAMETER,'PRINTER');
          ADD_PARAMETER( param_grp , 'P_DESFORMAT' ,TEXT_PARAMETER,'DEFAULT');
     END IF;
     /* Added (End) by Piyush on 09/09/2007 GRN Email, Generate PDF CR20*/
     /* Commented (Start) by Piyush on 09/09/2007 to set value based on paramter CR20*/
     --ADD_PARAMETER( param_grp , 'P_DESTYPE' ,TEXT_PARAMETER,'PRINTER');
     --ADD_PARAMETER( param_grp , 'P_DESFORMAT' ,TEXT_PARAMETER,'DEFAULT');
     /* Commented (Start) by Piyush on 09/09/2007 to set value based on paramter CR20*/
ADD_PARAMETER( param_grp , 'P_COPIES' ,TEXT_PARAMETER, 1);
ADD_PARAMETER (param_grp ,'PARAMFORM' , TEXT_PARAMETER, 'NO');
ADD_PARAMETER(param_grp,'P_REPID',TEXT_PARAMETER,'R021');
ADD_PARAMETER(param_grp,'P_MENUID',TEXT_PARAMETER,NULL);
ADD_PARAMETER(param_grp,'P_USERID',TEXT_PARAMETER,:grn_header.created_by);
/* Code for adding user Parameters to the list should be added over here */
ADD_PARAMETER(param_grp , 'P_FROM_GRN_NO', TEXT_PARAMETER,to_char(:grn_header.grn_no));
     ADD_PARAMETER(param_grp , 'P_TO_GRN_NO', TEXT_PARAMETER,to_char(:grn_header.grn_no));
/* Get the application property to check whether mode is client server or Web */
v_runmode := Get_Application_Property(USER_INTERFACE);
IF v_runmode = 'WEB' THEN
     SELECT     a.value,b.value,c.value
               INTO          v_mch_name,v_port_no,v_server_name
               FROM          parameter_master a,parameter_master b,parameter_master c
               WHERE          a.type_code = 13 and a.value_code = 1 AND
                                   b.type_code = 13 and b.value_code = 2 AND
                                   c.type_code = 13 and c.value_code = 3;
/* Code for calling the reportin web mode */
--FP_CONNECTSTRING(o_usrid , o_password ,o_dbname );
web.show_document('http://'||v_mch_name||':'||v_port_no||'/ows-bin/rwcgi60.exe?module='||
                                                  '+userid='||o_usrid||'/'||o_password||'@'||o_dbname||     /*added by Amol on 16/08/01*/
                                             '+server='||v_server_name||
                                             '+desformat=default'||
                                             '+p_destype=printer'||
                                             '+p_copies=1'||
                                             '+p_repid=R021'||
                    /* Code for adding user Parameters to the list should be added over here*/
                                                                 '+p_grn_number='||:grn_header.grn_no||
                                             '+p_userid='||:grn_header.created_by||
                                             '+p_menuid='||NULL
ELSE
/* Code for calling the report by passing the parameter list to be added over here
For Example */
Run_Product(REPORTS,'R021', SYNCHRONOUS,RUNTIME, FILESYSTEM, param_grp ,NULL);
IF v_potype <> 'VMIPO' THEN
          param_grp_frr := Get_Parameter_List(pl_name2);
     /* Creates the parameter list if one doesnt exist */
                    IF Id_Null(param_grp_frr) THEN
                              param_grp_frr := Create_Parameter_List(pl_name2);
                              IF Id_Null(param_grp_frr) THEN
                                        Message('Error creating parameter list '||pl_name2);
                                        RAISE Form_Trigger_Failure;
                              END IF;
                    ELSE
                              Destroy_Parameter_List(param_grp_frr);
                              param_grp_frr := Create_Parameter_List(pl_name2);
                    END IF;
ADD_PARAMETER(param_grp_frr, 'DESTYPE', TEXT_PARAMETER, 'FILE');
               ADD_PARAMETER(param_grp_frr, 'DESNAME', TEXT_PARAMETER, v_path || 'FRR_' || to_char(:grn_header.grn_no) || '.pdf');
               ADD_PARAMETER(param_grp_frr, 'DESFORMAT', TEXT_PARAMETER, 'PDF');
               ADD_PARAMETER(param_grp_frr , 'P_GRN_NO', TEXT_PARAMETER, TO_CHAR(:grn_header.grn_no));
               --ADD_PARAMETER (param_grp ,'PARAMFORM' , TEXT_PARAMETER, 'NO');
          --ADD_PARAMETER(param_grp,'P_REPID',TEXT_PARAMETER,'R186');
          --ADD_PARAMETER(param_grp,'P_MENUID',TEXT_PARAMETER,NULL);
          --ADD_PARAMETER(param_grp,'P_USERID',TEXT_PARAMETER,:grn_header.created_by);
     --Run_Product(REPORTS,'R186', SYNCHRONOUS,RUNTIME, FILESYSTEM, param_grp ,NULL);
     Run_Product(REPORTS,'R186', SYNCHRONOUS,RUNTIME, FILESYSTEM, param_grp_frr ,NULL); --testing
END IF;
END IF ;
EXCEPTION
WHEN OTHERS THEN
IF sqlcode = -302000 THEN /* Invalid file path */
          alt_msgs := LPK_ERROR.F_ERROR_MSGS(910);/*Enter Valid Path and File name.*/
     END IF;
END;
please give a clue

You have to give us a bit more then this. What stopped? Web or client/server version? What changed last month? Are there errors?
For the code, please use the { code } tags for formatting and readability.

Oraarch file getting generated very often in /oracle/ SID /oraarch/

Dear All
I am facing a problem of getting oracle archive (oraarch) generated very frequently nearly 50MB file in less than a minute due to which my Filesystem capacity of Oraarch is getting full soon.
I have monitored there is no any batch job, Upload job, or any loaded job going even in Idle time in late night the same frequency of Archival is going so in a duration of 6-7 hours i am getting the total archive of 50GB.
I have Oracle 10g Patch Set 10.2.0.4.0 and all the 39 Patches & 2 CPU Patches applied by Opatch & MOPatch and all the Oracle 10g Parameter are set as per the note 830576.
Can you please let me know what can be the issue?
Thanks & Best Regards
Rahul

You probably have statistics being populated and AWR running. Oracle 10g has system jobs that are set to run frequently (i.e. every hour, every night, etc).
column repeat_interval format a70
select job_name, repeat_interval, enabled from dba_scheduler_jobs;
column what format a50 word_wrapped
select job, last_date, next_date, broken, what from dba_jobs;
50mb is probably too small for your environment. You'll probably want to at least double that... at least.
And if your oraarch is filling up so frequently you should consider increasing the space of oraarch. It sounds like your system is much busier than you expected.
Run this command to get an idea of what Oracle recommends for your redo log file sizes...
SELECT TARGET_MTTR,ESTIMATED_MTTR,WRITES_MTTR,WRITES_LOGFILE_SIZE, OPTIMAL_LOGFILE_SIZE FROM V$INSTANCE_RECOVERY;
If that doesn't work it's probably because you're not using the system parameter fast_start_mttr_target... which I guess is something SAP advises against using? I'm an Oracle DBA but a SAP newbie so I'm still learning what parameters SAP wants me to set and why
Hope that helps..
Rich

WAR file not getting generated

I am in the development of a web application with jsf2 ,and I am almost done with that and pretty much happy with the outcome , but now comes the problem , I am trying to get the project as WAR file but after the war creation wizard I am not seeing any war file in the mentioned path. Please let me know any suggestions
I am using
Jdeveloper 11

I just figured way out of my problm silly me, but now the generated WAR is throwing errors while deploying it

Some files never getting transferred to our FTP Server

We are moving configuration changes from one instance to another using 'Manage Implementation Projects' functionality. This PeopleTools functionality creates DM scripts to transfer functionality like Billing, Contracts, etc to another instance when you click 'Export'
It is supposed to send the scripts to 'FTP Server > psdata > PSFILEDIR' on a Windows system in Financials 9.1 using PT 8.53.04. We constantly get a 'Permission Denied' from this process when trying to do this.
This problem happens in all DEV instances, yet the process works fine in the Prod instance. I have examined the permissions in the PSFILEDIR and compared them in DEV and PROD and find no differences

I guess you didn't like my last answer. So I'll try again. First off, forget FTP. We don't even care about FTP and adding it to the Title of the question just confuses things and maybe gets you less responses. In production, does this open a Dialog box/Save window when the export finishes?
My assumption is that you have the variable PS_FILEDIR set to \\s-wpstbftp1\s$\psdata\PSFILEDIR for the app server. Is that true?
You are failing on line 10 which is
&PROJECT_FILE = GetFile(&FILENAME, "W", %FilePath_Relative);
The PSAPPSRV process is trying to open a file in write mode. It's using Relative Path which appends &FILENAME to the path which is determined by either PS_FILEDIR or PS_SERVDIR. This part of the code is not even the part where the file is supposed to be placed at a final destination. This is very initial step in creating the file, nothing is being written yet. The PSAPPSRV process at this point knows nothing about FTP or other network transfer protocols, it simply knows that it should use \\s-wpstbftp1\s$\psdata\PSFILEDIR as the path. To the PSAPPSRV process this is a path that is locally available on the server,wWhen the system call comes through to the OS to attempt to open this file, the operating system is what allows this to seamlessly connect to a network resource.
There are two potential points where for this and they both relate to the user running the PSAPPSRV process.
You are using the Admin share for the S: drive on s-wpstbftp1. This means any connection to this PATH must be made as a user that is an Administrator on server s-wpstbftp1.
The PSAPPSRV processes must be running as a user that is an Administrator on the other server. This requires configuring the Oracle ProcMGR Windows service to run as a user that has access to the resources in question.
So to fix this you need to look at the ProcMGR service and set it to run as an Administrator user from s-wpstbftp1. This may require additional tasks such as setting up that user on the PeopleSoft server. Use task manager to look at what user is running the PSAPPSRV processes and make sure it's the user you need it to be.
In my humble opinion though, this is bad configuration:
You shouldn't be using Admin shares
I don't like relying on remote server paths that aren't redundant storage devices (NAS or SAN). What if this server is down and other processes need to use this path?
You appear to be expecting this file at a location where it is created for further processing by the code, not the final destination. The file is intended to be downloaded by the user. I don't know why the developer decided to leave the file on the file system, but they may decide to clean up after themselves or change how this works in the future. The file is created, inserted into the database, then read from the database, sent to the user, and deleted from the database. The code calls DetachAttachment which the PeopleCode Language Reference book says:
Use the DetachAttachment function to download a file from its source storage location and save it locally on the end-user machine. The file is sent to the browser with appropriate HTTP headers to cause the browser to display a save dialog box to the user.

Output file not getting generated.

I have a scenario R/3->XI->Legacy system. When the file is generated by a program, unix script runs and moves the file to FTP server. From there, it is moved to output folder on Legacy system. I have an issue where I am not able to see the output file from the FTP server to the Legacy system. There are no errors seen on message monitor or RTWB. I also checked the program, Unix script, FTP server is all running. What can I do for troubleshooting? I have checked almost everywhere. I also checked the server port XI connects, the system login, etc.
Any suggestions or ideas?
Thanks.

Rajan
What I understand from your saying is:
With a program R/3 is generating a File. So here there is no XI role.
Then XI is picking this file and sending to FTP server. So File-XI-File scenario. First of all are you sure that your R/3 is generating the file what XI is expecting? If yes then your XI will pick up and you will see in SXMB_MONI. If not first find out whether it is generating or not. If it generates and if you are unable to pick the file then check the authorisations. Also if you are doing Content conversion kindly go to adapter monitor and find out whether you can see any error?
Regards,
---Satish

File not getting generated.

I am doing an IDOC to file & mail.I mean 2 receivers.
everything is fine XI...but the file is not getting created at the path....It shoes successful flag in XI.
mail is working fine....
i used variable substitution for defining the name of the file schema...and content conversions aswell...
what should be the problem....

Hi,
Check the file adapter configuration as well check the file adapter status from RWB communication channel monitoring.
chirag

Empty file is getting generated at Target FTP Folder side

Similar Messages

Maybe you are looking for