Empty ID log from NI-CAN BusMonitor

I am using NI-CAN BusMonitor with a NI USB-8473 to monitor can traffic on my system. The USB CAN is only used for monitoring not part of the system. When I run NI-CAN BusMonitor, I see one line per ArbID and I observe the number of messages incrementing for each Arb ID. But if I try to double click the id while the capture is running, I do not get the ID Log display. If I stop the capture and then double click the Arb ID, the log displays, but it is empty.
I have read the help and it appears that I should see something.
Oh yes I have logging going to a file and the file has all the messages in it, just can't figure out how to properly use the ID log feature.
What am I doing wrong?

Hi, have you seen this article? I hope this helps
Alejandro | Academic Program Engineer | National Instruments

Similar Messages

My Macbook Air can delete files and folders and take them to Trash Can but cannot delete from Trash Can . Cannot empty trash securely.

My Macbook Air can delete files and folders and take them to Trash Can but cannot delete from Trash Can . Cannot empty trash securely.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Can't log in with valid password, can't boot from disk, can't access disk utility, in single user mode can't reset password as appears locked in caps mode with '?' for forward slash, can anyone help?

Can't log in with valid password, can't boot from disk, can't access disk utility, in single user mode can't reset password as appears locked in caps mode with '?' for forward slash, can anyone help?

Which keyboard layout you were using? German, French ... I suppose your layout is reset to the default: US and you are unable to find the "?" or "/" ...
Please have a look into the keyboard viewer, to see how the layout of your keyboard is actually.
marek

Mba sound: just bought my first mba and I have been using it in my house no problem...took it to my empty office today and I can hear a small vibration/sound coming from the upper left part of the keyboard...constant and rhythmical...ideas?

mba sound: just bought my first mba and I have been using it in my house no problem...took it to my empty office today and I can hear a small vibration/sound coming from the upper left part of the keyboard...constant and rhythmical...ideas?

Hi
It's likely your fan, It always runs on a MBA. Mine is very quiet, others report some noise - here is one link. There are lots of others.
Hope this helps
Cheers
https://discussions.apple.com/thread/4381367?start=0&tstart=0

Can't empty GarageBand files from trash

I am creating GarageBand files; when I move them to trash and then try to empty the trash, I get a message saying I need to make sure they are "unlocked" and permissons are all okay, and then it gives me two options: Stop or Continue, neither of which successfully deletes the file from the trash.
I have gone to the file's "Get Info" and confirmed the the "Locked" box is NOT checked, and that my permissions are "Read and Write" and I've even tried to unlock the little lock at the bottom of the Get Info screen. To no avail, I still cannot empty the file from the trash.
I have checked user communities and tried to hold down the Option Key while I empty the trash. One time out of 4 or 5, this works. I have also tried to hold down the Option AND shift keys at the same time while I empty the trash. No difference.
The only thing that seems to work is one user's suggestion to open the "Terminal" utility and type in some command that supposedly resets permissions and empties the trash and fixes everything. This has worked both times I've done it, but then the next time I put a new file into the trash, it's once again back to being stuck and "locked."
I'm not sure whether to post this in GarageBand community or Lion/general pages, so I may do both...but can anyone help me here?
Thanks.

Now that I posted - More Like This offered the solution - hold Option key while emptying - works on locked files also. Thank You Very Much !!!

Standby can't received logs from primary after upgrade 10.2 to 11.2

Hi
I have counter problem on standby after upgrade from 10.2.0.1 to 11.2.0.2.The standby can not received logs from primary when look on dataguard log is shown as follows.it seem log transport service timeout before completion send logs to standby server
D MON_PROPERTY operation completed
2012-03-20 15:09:14.522 DMON: Timeout posting message to database 2 after having waited for 0 seconds, killing NSV1 (PID=4672)
2012-03-20 15:09:15.524 02001000 622551633 DMON: failed to forward op CTL_GET_STATUS to site standby with error ORA-16662
2012-03-20 15:09:15.524 02001000 622551633 DMON: Database PRIMARY returned ORA-16662
2012-03-20 15:09:15.524 02001000 622551633 for opcode = CTL_GET_STATUS, phase = NULL, req_id = 1.1.622551633
2012-03-20 15:09:15.525 02001000 622551633 DMON: CTL_GET_STATUS operation completed
2012-03-20 15:09:48.676 RSM detected log transport problem: log transport for database 'standby' has the following error.
2012-03-20 15:09:48.676 ORA-16198: Timeout incurred on internal channel during remote archival
2012-03-20 15:09:48.677 RSM0: HEALTH CHECK ERROR: ORA-16737: the redo transport service for standby database "standby" has an error
2012-03-20 15:09:48.789 00000000 622551634 Operation HEALTH_CHECK canceled during phase 2, error = ORA-16778
2012-03-20 15:09:48.790 00000000 622551634 Operation HEALTH_CHECK canceled during phase 2, error = ORA-16778
Please anyone have ideas
thanks
kind regard
Salutary(bob)
Edited by: 826034 on Mar 20, 2012 5:31 AM

826034 wrote:
SQL> select severity, error_code,message,to_char(timestamp,'DD-MON-YYYY HH24:MI:SS') from v$dataguard_status where dest_id=2;
Error              16198
WARN: ARC0: Terminating pid 31868 hung on an I/O operation
+20-MAR-2012 13:29:32+
SEVERITY      ERROR_CODE
MESSAGE
TO_CHAR(TIMESTAMP,'D
Error              16198
WARN: ARC0: Terminating pid 32182 hung on an I/O operation
+20-MAR-2012 13:34:37+
Error              16198
WARN: ARC0: Terminating pid 32393 hung on an I/O operation
SEVERITY      ERROR_CODE
MESSAGE
TO_CHAR(TIMESTAMP,'D
+20-MAR-2012 13:39:42+
Error              16198
WARN: ARC0: Terminating pid 32620 hung on an I/O operation
+20-MAR-2012 13:44:47+
Error              16198
SEVERITY      ERROR_CODE
MESSAGE
TO_CHAR(TIMESTAMP,'D
WARN: ARC0: Terminating pid 474 hung on an I/O operation
+20-MAR-2012 13:49:52+
Error              16198
WARN: ARC0: Terminating pid 696 hung on an I/O operation
+20-MAR-2012 13:54:57+
thanks
regard
SalutaryCheck this thread, it may helpful.. looks similar issue log shipping problem after upgrade to 11.2.0.2

I just downgraded from iTunes 11 back to itunes 10.7.5. My iTunes is now working from one of the Previous Music Librabies. How can I make that previous library my current library? Also, I can't empty iTunes 11 frome the trash. Why not?

I just downgraded from iTunes 11 back to itunes 10.7.5. My iTunes is now working from one of the Previous Music Librabies. How can I make that previous library my current library? Also, I can't empty iTunes 11 frome the trash. It tells me iTunes 11 is still open. What's going on?
Thanks in advance!

Without providing details on exactly what you did it is hard to provide an answer. It's like me saying, "This chocolate cake I made tastes wrong," but not providing the recipe for review. Maybe it was the garlic in that particular recipe.
If iTunes is successfully using a previous library which you rename to iTunes Library.itl then that is now the current library.
Have you restarted your computer and then tried emptying the trash?

How can i see a crash log from safari?

How can I see Crash logs from Safari, it sometimes crashes.

I have a late 2008 Mac Book Pro (2.66 Core 2 Duo) and had the same problem. Additionally I have replaced my HDD with a Crucial M4 and my CD-RW with an OCZ Vertex2 using an optibay.
The fix in My case was the Firmware upgrade of the Crucial M4 SSD from Rev 000F to 010G.
The Vertex 2 also got an upgrade to version 1.37
I keep my OS on the Crucial M4 and my Home on the OCZ.
Hope this helps someone.
Looks like Apple, in the 10.8.2 Combo changed some drivers for the SSDs and firmware upgrade is mandatory on the nonsuported SSDs.
Thank you.

I can't empty the trash from my iPhone 4S email account. I have ios6 and up today's software.

I can't empty the trash from my 4s iPhone email. I have iOS 6 and updated software. How do I delete the emails in the trash?

There is no "empty" button. The folder is cleaned out automatically based on your settings. The default is usually one month and then the email is permanently deleted from the Trash.
What kind of email account are you using?

Can MARS 6.0.5 gets logs from CheckPoint NGX 6.5 running in a Cluster?

Can MARS 6.0.5 gets logs from CheckPoint NGX 6.5 running in a Cluster? Active/Standby
Can MARS 6.0.5 gets logs from CheckPoint NGX 6.5?
Can you use MARS 6.0.5 with CheckPoint NGX 6.5?

Hi Bryan,
Yes, you can use MARS with checkpoint. You will need to make the MARS device an OPSEC client and exchange SIC keys with the firewall managers. It's not too hard and there is a pretty decent guide here:
http://www.cisco.com/en/US/docs/security/security_management/cs-mars/6.0/device/configuration/guide/chCheckPointDevices.html
I've been using this with R65, R61 and R55 and haven't had any problems with it.
Let me know if you need a hand.
Erric

GRC10.0 FF controller can read the Logs from all FFID

HI,
we'v just implemented SP5 fpr GRC10.0 and noticed that the Firefighter Controller can read all the activity logs from all the firefighter ID by Super User Management Reports, even if the FFID doesn't belong to him.
Does someone know how to restrict it, so that the FF Controller can just access the FF logs which belong to him?
Thanks a lot!

Hi,
I believe the purpose of the SPM reports, such as the Consolidated Log Report, is to allow an individual to gain a comprehensive view into all FF usage - not just that of a single FFID or single FF session.
Personally, I think it is helpful to allow controllers to review activity across many different FFs or sessions, but if you have a specific requirement to limit controllers to only seeing their own FF ID logs (maybe a sensitive data concern coming from another FF ID?), I don't believe you will be able to acheive this by restricting the SPM reports.
As far as I can tell, there are not authorizations or other options to limit the results of this report to your FF IDs only.
By restricting the GRAC_REP authorization object and the GRAC_REPID field, you could choose to take away access to this report(s) and then the controller's couldn't view this data. You could then have them rely on the emailed/workflow driven reports only for their review which would be just a single FFID session.

Photomerge panorama produces an empty merge file from two images; how can I fix this? Thanks

Photomerge panorama produces an empty merge file from two images; how can I fix this? Thanks

If you did not create this swf yourself then you won't be able to do what I am suggesting. If you did, then open the fla in Flash and go into the Publish Settings and select the option to publish an html file as an output. That will create an html page that embeds the Flash file. Test that file in your browser and see if it plays properly. IF so, then copy that code in place of whatever Dreamweaver did to embed the Flash.
Dreamweaver is not a reliable tool for embedding Flash content... why it does not do it the same way Flash does it is anyone's guess.

Empty call log!!!!!

I have recently changed from iPhone and am still getting used to android! The call log is always showing empty so unable to see calls. I have read previous forums and I have amended call log to show and it is still showing empty. I imported all my contacts from my iPhone by xperia transfer when.I first had the.phone. Is there any way I can get a call log at all!?!?! Thanks in advance

Hi there.
I was facing the same problem and found some kind of a solution.
I've installed a call log from Google Play (Call Log Monitor, one with a red icon) selected all the log (with the check boxes) and delete the log. On the Phone log it appears a message saying "Call log empty", tried to make a call and the call appeared on the log.
Problem solved, with a little effort.
I think that the problem is with the recover app from Sony, so... DON'T use it
Hope this post can help you all.

HT4623 how do I remove credit card from information can't download or update anymore

how do I remove credit card from information can't download or update anymore

Open iTunes on your computer, click on your Apple ID and log in with your password. Edit your payment information.

How to write to windows event logs from determinations-server under IIS

This is just an FYI technical bit of information I wish someone had shared with me before I started trying to write OPA errors to the windows event log... Most problems writing to the windows event log from log4net occur because of permissions. Some problems are because determinations-server does not have permissions to create some registry entries. Some problems cannot be resolved unless specific registry entry permissions are actually changed. We had very little consistency with the needed changes across our servers, but some combination of the following would always get the logging to the windows event log working.
To see log4net errors as log4net attempts to utilize the windows event log, temporarily add the following to the web.config:
<appSettings>

<add key="log4net.Internal.Debug" value="true"/>
</appSettings>
<system.diagnostics>
<trace autoflush="true">
<listeners>
<add
name="textWriterTraceListener"
type="System.Diagnostics.TextWriterTraceListener"
initializeData="logs/InfoDSLog.txt" />
</listeners>
</trace>
</system.diagnostics>
To add an appender for the windows event viewer, try the following in the log4net.xml:
<appender name="EventLogAppender" type="log4net.Appender.EventLogAppender" >
<param name="ApplicationName" value="OPA" />
<param name="LogName" value="OPA" />
<param name="Threshold" value="all" />
<layout type="log4net.Layout.PatternLayout">
<conversionPattern value="%date [%thread] %-5level %logger [%property{NDC}] - %message%newline" />
</layout>
<filter type="log4net.Filter.LevelRangeFilter">
<levelMin value="WARN" />
<levelMax value="FATAL" />
</filter>
</appender>
<root>
<level value="warn"/>
<appender-ref ref="EventLogAppender"/>
</root>
To put the OPA logs under the Application Event Log group, try this:
Create an event source under the Application event log in Registry Editor. To do this, follow these steps:
1.     Click Start, and then click Run.
2.     In the Open text box, type regedit.
3.     Locate the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Application
4.     Right-click the Application subkey, point to New, and then click Key.
5.     Type OPA for the key name.
6.     Close Registry Editor.
To put the OPA logs under a custom OPA Event Log group (as in the demo appender above), try this:
Create an event log in Registry Editor. To do this, follow these steps:
1.     Click Start, and then click Run.
2.     In the Open text box, type regedit.
3.     Locate the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog
4.     Right-click the eventlog subkey, point to New, and then click Key.
5.     Type OPA for the key name.
6.     Right-click the new OPA key and add a new DWORD called "MaxSize" and set it to "1400000" which is about 20 Meg in order to keep the log file from getting too large.
7.     The next steps either help or sometimes cause an error, but you can try these next few steps... If you get an error about a source already existing, then you can delete the key.
8.     Right-click the OPA subkey, point to New, and then click Key.
9.     Type OPA for the key name.
10.     Close Registry Editor.
You might need to change permissions so OPA can write to the event log in Registry Editor. If you get permission errors, try following these steps:
1.     Click Start, and then click Run.
2.     In the Open text box, type regedit.
3.     Locate the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog
4.     Right-click the EventLog key, select Permissions.
5.     In the dialog that pops up, click Add...
6.     Click Advanced...
7.     Click Locations... and select the current machine by name.
8.     Click Find Now
9.     Select both the Network user and IIS_IUSERS user and click OK and OK again. (We never did figure out which of those two users was the one that fixed our permission problem.)
10.     Change the Network user to have Full Control
11.     Click Apply and OK
To verify OPA Logging to the windows event logs from Determinations-Server:
Go to the IIS determinations-server application within Server Manager.
Under Manage Application -> Browse Application click the http link to pull up the local "Available Services" web page that show the wsdl endpoints.
Select the /determinations-server/server/soap.asmx?wsdl link
Go to the URL and remove the "?wsdl" from the end of the url and refresh. This will throw the following error into the logs:
ERROR Oracle.Determinations.Server.DSServlet [(null)] - Invalid get request: /determinations-server/server/soap.asmx
That error should show up in the windows event log, OR you can get a message explaining why security stopped you in "logs/InfoDSLog.txt" if you used the web.config settings from above.
http://msdn.microsoft.com/en-us/library/windows/desktop/aa363648(v=vs.85).aspx
Edited by: Paul Fowler on Feb 21, 2013 9:45 AM

Thanks for sharing this information Paul.

Empty ID log from NI-CAN BusMonitor

Similar Messages

Maybe you are looking for