Empty page between frames in the output file

Hi,
I have two individual frames in the report one below the other each in different page. Everything is good but in the output pdf file I am getting an empty page between these frames. There is an empty page after the end of first frame data and before the begning of the second page data.
Any suggestion would be a great help.
Thanks

Hi,
I'm sure I'm pointing to the obvious answer, but have you checked that there is no page break before of after both blocks. Probably you have one more than you need.
If you have defined one block in one logical page you do not need page breaks.
I hope this helps you.
Elisa

Similar Messages

Receiver SFTP adapter giving spaces between characters in the Output file

Hi PI Experts,
My Scenario is: Paymul (EDI file ) ECC -> PI -> SFTP server.
Source Sender File adapter able to pickup this Paymul D96A file and able to send messages to target SFTP server using SFTP receiver adapter.
But, Generated Output file having single space between each character. I am not using any content conversion modules in Receiver SFTP adapter.
Also not having any mappings to transform the messages. it is just pass through interface.
I have attached example Output file. I have changed the .Dat file to .txt just to attach here.
Could any one try to help me on this. Please let me know incase need any more details.
Thanks,
Govindu.

Hi Govindu,
Please see if the below Endcoding settings wont resolve your issue.
File Type - Text
File Encoding - ISO-8859-1
Regards,
Jannus Botha

Using `n how can i add two empty line (two carriage return), between these two lines in the output file?

hi friends
using `n how can i add two empty line (two carriage return), between these two lines in the output file?
PS C:\> $env:COMPUTERNAME | add-content c:\file.txt
PS C:\> $Env:USERDOMAIN | add-content c:\file.txt
i tested "$env:computername`n`n`n$env:userdomain" | add-content c:\file.txt but it results in
myPCMyDomain
but i wanted the contents of the output file be like this:
MyPC
#empty line here
#empty line here
MyDomain
i tested many other forms but didn't work.
thanks

I tried it, as well. The line breaks were respected in the PowerShell console, Programmer's Notepad, and Word; they weren't in Notepad.
You are using a Unicode file. Locale is what?
If you just want notepad compatible line breaks then do this:
del file.txt ; "$env:computername`r`n`r`n`r`n$env:userdomain" | add-content file.txt ;notepad file.txt
Look in hex to see that `n is ^L or 0xA and is only one character. CrLf is 0xD 0xA - two characters.
My programmers editors and VS all understand a single ^L as a line break so does PowerShell. Only DOS/Notepad and other utilitis don't understand this..
¯\_(ツ)_/¯

How to create multiple pages in the output file?

hi, we have an application (C++) that generates PDF output. I've been asked to figure out how to create multiple copies of each page (uncollated). i.e. the output would be 4 copies of p 1 followed by 4 copies of p 2, etc. I'd like to do this without actually replicating each page if possible ... any ideas?

Why not just put four copies of the same CosObj reference into the Pages array/tree?

I have this following problem in Adobe Premiere Elements 11: Error of export: You don't have permissions to create or delete the output file.

Hey guys,
I have this following problem:
When i export my movie to my desktop from premiere elements 11 it fails and says "Error of export: You are not permitted to create or delete the output file."
This is the first time i had this problem.
I have no ideas to solve this problem ... I don't found it on this page neither in the whole web -.-
I look forward to get requests

S
QuickTime is a requirement for Premiere Elements (any version). Please download and install it so that we can continue this troubleshooting. Among other things, without QuickTime installed, you will not have QuickTime presets in Publish+Share and will not have available to you codecs supplied by that player.
Please right click the Premiere Elements 11 desktop icon and apply Run As Administrator. Please review computer permissions..
In the meanwhile, please reply to all the questions, including
What is the description for your export choice and does it make a difference if your Export Save In location is the desktop or to Video Folder in Documents?
What is a description of your computer resources?
Please consider and supply details need to help us help you.
We want you to succeed.
Thank you.
ATR

Context-sensitive help - where is the CS topic folder in the output files?

I have created a FlashHelpPro help file in RoboHelp 7 HTML. In the project setup pane, I have Map ID'd my context-sensitive topics and linked them to their respective pages. I generated the project, but there is no folder containing the context-sensitive topics in the output files. As a result, the developer suggested that I need to create a separate folder in the Project Manager that contains all the context-sentitive topics. Is this actually the next step, or can the developer find what he needs elsewhere in the files?
I haven't seen anything about creating a separate folder in the Project Manager, which seems redundant as there is the 'Context-sensitive Help' folder already present in the Project Set-up. Do I need to create a separate folder, as suggested by the developer? If not, where can he find the context-sensitive files in the output? Thank you.

Hi,
What do you mean that the context sensitive topics are not in the output? RoboHelp generates your output and (in WebHelp, so the same should count for FlashHelp) puts the context sensitivity in cshdat_webhelp.htm. Your developer doesn't need to worry about this, he just has to get his call right.
For information on calling the help, see http://www.grainge.org/pages/authoring/calling_webhelp/calling_webhelp.htm. It's for WebHelp but it should be the same for FlashHelp.
If your developer only wants to know which mapid's he has to call, you best give them your map files (the .h files).
Greet,
Willam
This e-mail is personal. For our full disclaimer, please visit www.centric.eu/disclaimer.

Using Timestamp [TS] in the output file name

Hello Everyone,
i am trying to get the timestamp into the output file generated by the store file atom. Since my Outbound channel is void i thought i could use:
[TS]
or
[yyyy][mm][dd][hour][min][sec]
My File Specification is: C:\Temp\Out\blabla[TS].xml and unfortunatelythe outputfile are named: blabla[TS].xml
What am I doing wrong? Can i not use those placeholders in an atom?
Help is greatly appreciated
Best regards
Simon

Hi Simon,
Now I see, you're trying to maintain the timestamp in the SLD FILO section and not in a store file atom of an integration scenario.
In this case, please check the following help document:
filePattern
To define the outbound file pattern, define the directory and the file specification. Enter the full path. The integration framework supports Microsoft Windows UNC (Universal Naming Convention) names. The directory you enter must exist in the file system. The user for directory access must have the necessary rights in the file system.
You can use the following special characters and variables:
Character/
Variable
Description
To introduce numbering in the file directory use ?.
If you enter for example data????.xml, the integration framework creates an outbound file called data0000.xml, if the directory is empty. If a file, following this naming convention, already exists in the outbound directory, the next generated file name is data<last number>+1.xml. If data0000.xml already exists in the directory, the next file in the directory is data0001.xml.
[vbiu]
This is a placeholder for a value you can define in scenario package processing. If you use the value, add the b1im_filename attribute directly in the outbound payload.
<xsl:template name="transform">
<xsl:attribute name="b1im_filename">myName</xsl:attribute>
</xsl:template>
[TS]
To add a timestamp to the file name, use the variable. This gives you another possibility to define unique file names.
[yyyy]
Adds the current year in four digits to the file name
[yy]
Adds the current year in two digits to the file name
[mm]
Adds the current month to the file name
[dd]
Adds the current day to the file name
[hour]
Adds the current hour to the file name
[min]
Adds the current minute to the file name
[sec]
Adds the current second to the file name
You can also combine the variables. For example file[TS]??.[hour][min].txt
Here is a screenshot of my SLD FILO definition and from the result:
Best regards
Bastian
P.S.: just in case you need to define a filename in the integration step for the store file atom, here is a screenshot:

Define path in selection screen to write the output file to pres. server

Hi can anyone tell me how to declare a variable so that the user can specify his own path name in the selection screen to store the output file in the presentation server. and please tell me how to link up the output file to the selection screen specified path.
thanks in advance.

DATA: FILE_TAB TYPE STRING.
SELECTION-SCREEN BEGIN OF BLOCK B02 WITH FRAME TITLE TEXT-B02.
PARAMETERS:
           P_FILE TYPE RLGRAP-FILENAME OBLIGATORY LOWER CASE.
SELECTION-SCREEN END OF BLOCK B02.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
PERFORM OPEN_FILE USING P_FILE.
FORM OPEN_FILE USING L_FILE.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
    CHANGING
      FILE_NAME     = L_FILE
    EXCEPTIONS
      MASK_TOO_LONG = 1
      OTHERS        = 2.
IF SY-SUBRC <> 0.
    SY-MSGTY = 'I'.
    MESSAGE ID     SY-MSGID
            TYPE   SY-MSGTY
            NUMBER SY-MSGNO
            WITH   SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    STOP.
ENDIF.
ENDFORM.
FILE_TAB = P_FILE.
CALL FUNCTION 'GUI_DOWNLOAD'
*Complete the FM
Greetings,
Blag.

How to get the Output File Name as One of the Field Value From Payload

Hi All,
I want to get the Output file name as one of the Field value from payload.
Example:
Source XML
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_TEST xmlns:ns0="http://sample.com">
- <Header>
<NAME>Bopanna</NAME>
</Header>
</ns0:MT_TEST>
I want to get the Output file name as " Bopanna.xml"
Please suggest me on this.
Regards
Bopanna

Hi,
There are couple of links already available for this. Just for info see the below details,
The Output file name could be used from the field value of payload. For this you need to use the UDF DynamicFile name with below code,
// Description: Function to create dynamic Filename
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File" , "FileName");
conf.put(key,a);
return "";
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File" , "FileName");
conf.put(key,a);
return "";
With this udf map it with the MessageType as
(File Name field from Payload) > DynamicFileConfiguration>MTReceiver
Thanks
Swarup

Why is the output file jerky ?

Hi there,
I have AE CS5 on my Mac. My system is 27" iMac core i5 with 12 GB RAM DDR3 1333 MHz with quad core.
I rendered a 40 seconds clip with an earth spinning.
I output it to mov format in 1920 x 1080.
When I did a RAM preview, it was fine & the earth was spinning smoothly.
But the output file (in mov) - (I did thru Composition > Make movie) when I play using QuickTime player is jerky at 20th Sec to 29th sec.
I then import this mov file into Final Cut, it look stuck in the Viewer but was perfect on the Canvas.
When I render in Final Cut, the output file as mov and use the same Quick Time player to play it & it is perfect.
Can I know what is the reason that it is not working in Quick Time the first time when it was fresh out from AE ?
Thank you.
Cheers

The default render settings use Quicktime Animation codec at best quality. These files will not playback smoothly because the data rate is too high for the hard drives to keep up with. The animation codec is a lossless codec designed not designed for playback.
Final Cut uses compressed codecs designed for playback as the default. I'd suggest that you open up the help files (F1) and read the entire section on Rendering and Exporting (link).

Input file should be deleted only after the output file is successful.

Hi Experts,
Could you pleas solve the below issue.
In a file to file scenario, the input file will be picked from a directory location and after processing output file will be placed in the output directory location specified in the receiver communication channel.
In the sender communication channel for the scenario mentioned above, if the processing mode is given as delete, the input file will be delete as soon as the file was successfully read by the adapter, but this will not ensure that the file processing is complete and the output file is being created.
If we have a scenario in such as way that the input file should be deleted from the input folder only if the complete process is successful and the output is generated. how can we achieve this functionality?.
And one more thing if we got the successful output the output file should be placed in one folder. and the if the output file is having errors it should be placed in other folder.

Hi,
In Receiver communication channel I have used the below command in Run Operating System
.And I have kept the processing mode of sender communication channel as test.
cmd.exe: /C "del /Leela/test.xml"
You are running the comman line program configured in the receiver File Adapter,but in command line you mentioned the Sender File Folder , So i guess it's not getting processed.
Try this:
Try to run the command line in the Sender File Adapter Side
"Place this in " --> Run OS Command After Message Processing.
Hope this would work and get in parrallel with u r requirement.
regards
Srini

IDOC to XML : error in opening the output file in iexplorer

Hi Frnds,
I have a scenario IDoc to xml where in Im getting some non ascii values in the idoc for which I used ISO-8859-1 encoding technique but still the conversion is not done. Iam unable to opend the output file in internet explorer giving the follwoing error as :
An invalid character was found in text content. Error processing resource
Please help me how to overcome this issue.
Thanks in advance,

Hi,
As i posted previously in xi UTF-8 is the default encoding if message protocal is FILE.
And UTF-8 encoding support unicodes..
Can reconfigure your receiver file adapter with file type as Binary and check once again.
go through http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/frameset.htm
refer File Type
now i check with a japanese double byte character and i can open in iexplorer.
regards,
pradeep A.

Header Name in the output file using content conversion

Dear All,
I want to have a text file with a header in the output. I have given the following values for content conversion:
RecordSet structure = Record,Row
Record.fieldSeparator='nl'
Row.endSeparator='nl'
Row.fieldSeparator=','
Row.addHeaderLine=1
but still I am not getting header in the output file. Please tell me where I am making a mistake in getting the header.
Reg,
NJ

hi chirag,
thnx for replying.
i m getting the required output file without any error but i m not getting header. i hve added "addHeaderLine" parameter in content conversion but still i m not getting header in the output file.
reg,
nj

How to get required tags and name spaces in the output File?

Hello,
I am doing IDOC to File sceanrio and I am able to get the file but the problem is that I am unable to get the required tag names. Out put file is having ns0 ns1 and so on..
Eg:
ns2:MaterialDefinitionProperty><ns2:MaterialDefinitionProperty><ns2:ID>CU_NET_WEIGHT</ns2:ID></ns2:MaterialDefinitionProperty><ns2:MaterialDefinitionProperty><ns2:ID>EAN_SKU</ns2:ID></ns2:MaterialDefinitionProperty><ns2:MaterialDefinitionProperty><ns2:ID>CUPerCase</ns2:ID>
and so on..
Source structure is IDOC
Target structure is External Defination imported with references.
How can I get the output file with the exact namespaces and tags as imported through External Definations.
Thanks in Advace.

HI! Rajeev,
I have gone through this forum and we having 100% same to same requirement here in my project.
We want this at the top of the Output Payload..
<?xml version="1.0" encoding="UTF-8" ?>
- <SyncMaterialDefinition xmlns="http://www.siemens.com/ad/mes/b2mt-1.0" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:bml="http://www.wbf.org/xml/b2mml-v02" xmlns:sit="http://www.siemens.com/ad/mes/b2mml-v02-SITExt-1.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:oag="http://www.openapplications.org/oagis">
- <oag:ApplicationArea>
and also isome part of payload nstead of ns0: and ns1:
we want it as below for some part of same output payload
<oag:ApplicationArea>
- <oag:Sender>
<oag:LogicalId>SAP</oag:LogicalId>
<oag:Component>PMConnector</oag:Component>
<oag:ReferenceId />
<oag:Confirmation>Always</oag:Confirmation>
</oag:Sender>
<oag:CreationDateTime>2009-06-14T22:23:29.42Z</oag:CreationDateTime>
</bml:MaterialDefinitionProperty>
- <bml:MaterialDefinitionProperty>
<bml:ID>XXXXXXX</bml:ID>
- <bml:Value>
<bml:ValueString>0.0</bml:ValueString>
<bml:DataType>string</bml:DataType>
<bml:UnitOfMeasure>n/a</bml:UnitOfMeasure>
<bml:Any />
*</bml:*Value>
Check the above code how we want but we are getting in normal way .
Could you please review this and guide me in detailed way how to do in a step by step manner if possible by taking my above payload condition.
Regards:
Amar Srinivas Eli

Append a file with date and name in the output file

I am running a script which produce an output in excel file, I would like the server name and the date in the output file, Both the servername and date has declared at the beginning of the script as
$server = test1
$date = Get-Date -uformat %Y-%m-%d
I am able to append either server or date but not both. Could you please help me out on this.
I would like the output file as '
server_report_date.xls

I got this working by
"C:\Aravind\Scripts\$server-"+"Report-" +"$Date"+".xls"
Thanks!!

Empty page between frames in the output file

Similar Messages

Maybe you are looking for