Empty payload for idoc adapter

Hello,
I have a file to idoc scenario with an xslt mapping. Normaly after the mapping the idoc looks like:
<wpwuw>-
     <idoc>...</idoc>
     <idoc>...</idoc>
</wpwuw>
Because of the business requirements in some cases the mapping should not generate an idoc. That means I have to create an empty payload.
The problem is that the idoc adapter creates an error for all kinds of empty messages.
a) empty payload
b) empty trading segment  ( <wpwuw></wpwuw> )
c) empty idoc segment  ( <wpwuw>-<idoc/>-</wpwuw> )
Any idea what I can do not to get an error from the idoc adapter ?
Regards Bernd

HI
instead of creating empty paylaod. Use conditional(enhanced for mapping & standard for condition on Xpath) receiver determination for this and dont generate IDOC for the specified conditions.
Thanks
Gaurav

Similar Messages

  • SA PI 7.1 EHP1 - Support for IDOC Adapter using AAE

    Hi,
    Can anyone confirm if the SAP PI 7.1 EHP1 supports the IDOC adapter in the AAE ?
    Cheers
    Colin.

    Hi Colin,
    I am workinngt on EHP1 PI7.1,but no support for IDoc Adapter in the AAE.
    The new features added for IDoc adapter is IDoc packging and new conversion module added .
    we have to wait till next release,but not sure...
    Regards,
    raj

  • QoS for IDOC adapter

    Hi all ,
        what are the QOS available for idoc adapter
    Regards,
    Tarang

    Hi,
    Check on this:
    <i>The quality of service EOIO (Exactly Once In Order) must be specified in the message header.
    The receiver system or the sender system must be based on SAP Web Application Server 6.40 or higher.
    If this is not the case, the quality of service is automatically changed to EO for compatibility reasons and the message is processed accordingly.</i>
    http://help.sap.com/saphelp_nw04/helpdata/en/bd/277264c3ddd44ea429af5e7d2c6e69/content.htm
    Regards
    Vijaya

  • Error when Loading Metadata for IDOC Adapter

    Everybody,
    I know this should be pretty straight forward and that there are a few posts about it.  But following the Demo 3.0 guide and the posts I can't seem to load the data into the IDOC Adapter.  I did every step in the guide and when I try to execute IDX2 for the source port I previously created I get the error "No RFC Destination is maintained  for the port".
    Following the guide I have my XI host
    ID:ABC
    Instance:01
    Client:700
    Executed IDX1 and got port SAPABC_107 with RFC Dest-ABC_107, which I defined previously with transaction sm59 and the test came back ok.
    When I try to execute IDX2 I get the error message...
    What am I missing ?????
    Thanks!
    Diego

    Everything was setup before (by following the XI 3.0 Demo guide) here are the steps I did:
    1. Setup an RFC R/3 Destination on my client 107 (American Airlines) to client 700 (my XI): ABC_700
    2. Setup an RFC R/3 Destination on my client 700 to client 107: ABC_107
    3. Setup the IDOC processing port "SAPABC" on client 107 with RFC Destination ABC_700.
    4. Define partner type LS for logical system ABCCLNT105 (Airline Lufthansa)
    5. Define partner type LS for logical system ABCCLNT700 (XI)
    6. Specified the ALE distribution model in client 107.
    7. Execute IDX1, I input the SAPABC port created in step 3, input the client number 107 and the RFC destination ABC_107 created in step 2 and save.  The result is port SAPABC_107.
    AND..!! where the error occurs:
    8. Execute IDX2 input port SAPABC_107 and idoc type and get the error message "No RFC Destination is maintain for SAPABC_107"
    Any ideas !?
    Thanks
    D
    The client 107 represents the Airline American Airlines and has a R/3 RFC Destination to client 700, my XI.  The same way my XI has an R/3 RFC Destination to client 107.

  • Port Settings for IDoc Adapter

    Hi All,
    Our scenario is like this ERP -> XI -> File. ERP sends IDoc to XI. I have a couple of questions.
    1. In the control part of an IDoc, there's a sender partner number and sender port. What are they used for? As I understand, the partner and port represent the destination of the IDoc instead of the source. Why is there sender port and partner?
    2. We need to maintain port using IDX1. Should I set the name of the port to be the same as the sender port of the IDoc?
    3. I didn't configure the scenario and the IDoc sender adapter. If the ERP system sends IDoc to XI, can I find it in t-code IDX5?
    Best Regards
    Jerome

    Hi Jerome,
    1. Sender Partner and Port :  The control record should have sender port and partner number. This will be used by the receiver system (i.e., XI system). Because, receiver system should know from which system this IDoc is coming using Sender Partner number. This partner number should be same as Logical system name in Sender Business system which is configured in SLD.
    The sender port should be SAP<Sys-id of sender system>
    and sender partner number should be <sys-id of sender>CLNT<client number of sender>
    2. The port created in IDX1 will be used for importing IDoc's metadata in XI system from R/3. IDoc metadata is needed by IDoc adapter to convert incoming IDoc to IDoc-XML format.
    It is mandatory to have same name for Port in IDX1 and sender port of the IDoc's control record.
    3. I think the IDoc wont be listed in IDX5 if scenario and IDoc adapter are not configured. IDX5 displays inbound and outbound IDocs in the IDoc adapter.
    Regards,
    Uma

  • Authorization for RFCUSER for IDOC adapter

    Hello,
    who can tell me, which authorizations the RFC User must have I want to use for the IDOC adapter.
    I have the problem, that I can not download the idoc definition into IDX2. Error: "No RFC authorisation..."
    Is there a list of authorization this user MUST have.
    best regards
    Werner Magerl

    Hi,
    The thread speaks of the same issue.
    User abcd has no RFC authorization for function group SYST
    If it's of any help.
    regards
    Vijaya

  • Required Enhancement Package for Idoc Adapter in Java

    Hi experts,
    I just would like to know which Enhancement Package I need for PI 7.1 when I want to have the Idoc adapter to be implemented in Java and not only in ABAP.
    Thanks and regards.
    Oliver Vöpel.

    I talked to someone from the SAP development. They told me it will be realized in enhancement package 2 or 3.
    Thanks and best regards.
    Oliver Vöpel.

  • Meta data Overview for Idoc Adapter

    Hi All,
       When i am trying to create meta data overivew for Idoc adpater of my source port, i am gettign this error "<b>Error: I::000</b>" and surprising abt this error.Any clues on this.........:) what should i do to do this??
    Thanks in Advance
    Cheers
    Veera

    Hi All,
       Once i have cross check RFC destination & Port and tried to load the meta data it was succesfully loded with out ant errors.The same port i have mention in Receivr Idoc adapter and tested the sceanrio File2Idoc.It is working fine.
    I have solved the problem my own ( And the tricky thing is i have deleted and recreated RFC dest,Port from XI to R3).However what is the cause of this error??
    Cheers
    Veera

  • Sender Radio Button disabled for Idoc adapter

    If u clearly observe .......
    Whats the necessity or significance of not having a sender communication channel(sender side radio button is disabled) and sender agreement in scenarios pertaining to Idocs....

    Hi Deepika,
    Just think that IDOC adapter as a sender, that means, you are getting source file (IDOC) from R/3 (SAP) system definitely. And XI is also and SAP system. As both are SAP systems, we already have a way of establishing the connection between SAP systems, which is ALE configuration. Using which, you can easily transfer IDOC from R/3 to XI.
    Also, you might know that IDOC and HTTP adapters reside on ABAP stack. When the R/3 and XI configuration settings are done, XI can receive the IDOC sent by R/3, directly to Integration Engine instead of Adapter Engine. If the file initially reaches to Adapter Engine, then the details about sender application are necessary, that means the Sender Agreement. But in this case, you don't even need the Sender Agreement.
    I hope you understand why the IDOC sender button is disabled and sender agreement is not necessary.
    Thank you.
    Regards
    Bhanu
    Intelligroup.

  • Adapter Module for receiver IDOC adapter?

    Hi,
    I have a scenario where i need to do some custom logging in the receiver adapters. For all receiver file adapters, i have written an adapter module which fulfills this custom requirement but how will i do this in the receiver IDOC adapter as its on the ABAP stack? I cannot write a java adapter module for this.
    Is there anyway by which i can write a ABAP adapter mosule and deploy it in the IDOC adapter? Or any other way to achive it. the scenario is such that i need to do the logging before the idoc is posted into R/3 system by the idoc adapter.
    Please advice.
    Regards,
    Yash

    Hi Chirag,
    Yes i have seen that the module tab is disabled for idoc adapter. I have a fin interface where i need to split a incoming file into an idoc and a file. For this purpose i need to log how many records are received by each adapter and the sum of the line items for audit perspose.
    any othr way to do it apart from doing it in message mapping. The req is to do in the adapter engine.

  • Sender IDOC adapter for SAP 3.1H system & XI 7.0

    We are on XI 7.0 and XI would receive a IDOC message from SAP 3.1H system.
    I need to import IDOC's in imported objects in integration repository but I cannot see any IDOC under the IDOC node. I am able to see the RFC's. Do we need to do extra steps with SAP 3.1H version for IDOC adapter?
    Thanks in advance for help!
    Mrudula

    Ahmad,
    This thread is for sender RFC adapter. I am able to see the all the RFC's but not IDOC's from Integration repository for imported objects from SAP 3.1H version.
    Thanks!
    Mrudula

  • Doubt on Idoc adapter parameters

    Hi ,
          I need one more clarification on Idoc adapter parameters :
    1.while configuring for IDOC adapter in communication channel , we have an option
    called "APPLY CONTROL RECORD VALUES FROM PAYLOAD" doubt arises here
    what actually this mean,and if this check box is ticked what values will be taken from payload and where will be they applied?
                           Plz clarify answers will be definetely rewarded.
                                                                                    Regards,
                                                                                    Vinod.

    Hi vinod reddy  ,
    If u want to add values to the control record , u have to select the APPLY CONTROL RECORD VALUES FROM PAYLOAD checkbox in the communication channel. When a new communication channel of type IDoc is created, the flag is set by default. If the flag is not set, the
    settings comply with XI 2.0
    This following websites clearly clarifies u'r doubt with detailed description with fields :
    Fields of the IDoc Control Record 
    http://help.sap.com/saphelp_nw04/helpdata/en/13/95244269625633e10000000a155106/content.htm
    Configuring the Receiver IDoc Adapter
    http://help.sap.com/saphelp_nw04/helpdata/en/96/791c42375d5033e10000000a155106/content.htm
    How to.......Sample IDoc XI Scenarios
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c09b775e-e56e-2910-1187-d8eba09c7a4a
    cheers!
    gyanaraj
    ****Pls reward points if u find this helpful

  • Overwrite Value from Payload for RCVPOR, Receiver Port

    Dear All,
    Can we overwrite value of receiver port (RCVPOR) from Payload?
    The actual port value (For example SAP<SID>) will be specified in IDOC Receiver adapter.
    If I want to replace this value with say ABC can I do it through mapping?
    I tried using "apply control record from Payload"  for IDOC Receiver communication channel but still the actual port value (SAP<SID>) is going to SAPR3 and not ABC.
    I checked the help.sap.com link as well.
    http://help.sap.com/saphelp_nw04/helpdata/en/13/95244269625633e10000000a155106/frameset.htm
    As per my understandings, RCVPOR value will be picked up only from IDOC Receiver communication channel.
    Can you please suggest?
    Warm Regards,
    Gouri

    Thanks Prateek for replying.
    Even my understanding is same that this value will not be overwritten. But I am not able to find any help.sap.com link or valid SAP Document which will clearly specify this.
    I need to pass this ABC value into IDOC header Record. This value will be required by User as selection criteria while executing WE05 and WE09 reports on SAPR3.
    This ABC value is nothing but the Application name and while executing above standard reports user will be able to differentiate application specific IDOCs if i provide this information in IDOC header .
    Now I spoke to ABAP Team and he suggested to use RCVPOR filed for thsi purpose as it is present in selection screen of both WE05 and WE09 report.
    So I wanted a confirmation through official document that we wont be able to use this field.

  • IDoc Adapter -  ATTRIBUTE_BE_NOT_SUPP Async processing

    Hello,
    I'm trying to establish IDoc communication. Here is the scenario that I need:
    <XML Data> --- <SOAP> --> PI Server ( Map XML to IDoc XML) --- <IDoc> --> SAP Retail System
    I have the following components set up:
    1. Sender SOAP Communication Channel that receives XML - Message Interface "InXML" - Outbound Asynchronous
    2. Sender Agreement
    3. Map from InXML to OutIDoc. OutIDoc - Message Interface - Inbound Asynchronous
    4. Receiver Determination
    5. Interface Determination
    6. Receiver Agreement
    7. Receiver IDoc Communication Channel
    8. Business Service for all this
    No Integration Scenario.
    If I replace item 7 to the FTP for example, everything works just perfect - I send XML it gets Mapped to IDoc and in my FTP I have the IDoc file.
    Now, I've asked SAP support specialist to establish communication from PI Server to Retail using IDoc. He send me parameters, which I used for IDoc Communication Channel:
    RFC Destination: NX7CLNT800
    Port: A000000022
    SAP Release: 3 - this is I put myself
    But when I run the whole system again, I'm getting the error:
    IDOC_ADAPTER  ATTRIBUTE_BE_NOT_SUPP - "Only asynchronous processing supported for IDoc adapter outbound processg"
    This is very confusing because both my message interfaces are Asynchronous.
    Can anyone tell me what I'm doing wrong and why I'm getting this error.
    Thanks.

    8. Business Service for all this
    Should it not be Business System for IDOC.....for SOAP it will be Business Service
    1. Sender SOAP Communication Channel that receives XML - Message Interface "InXML" - Outbound Asynchronous
    Check what is the QoS that is specified in the SOAP Channel.....if it is Best Effort then it will be a cause of the error......change it to Exactly Once (EO).
    Regards,
    Abhishek.
    Edited by: abhishek salvi on Dec 4, 2009 10:29 AM

  • ABAP Proxy or IDOC Adapter?

    Hi all,
    In my project, we are using 3 system(SAP R/3(ECC 6.0), Oracle and VAN). Data has to synchronize between these systems.
    1. Oracle ->PI ->SAP R/3
    Oracle system is sending Material master data to SAP R/3 ECC 6.0. At sender side I am using JDBC Adapter but at receiver side shall i go for IDOC Adpter or ABAP proxy? If I go for ABAP server proxy I need to create message type for material master in IR and then I have to write code in abap to insert MM data into tables in R/3. Please suggest which one will be better IDOC adpter or ABAP Proxy?
    2.VAN->PI->SAP R/3
    VAN is sending Invoice data to SAP R/3. At sender side I am using Seeburger Adapter. At receiver  shall i go for IDOC Adpter or ABAP proxy?
    3.SAP->PI->VAN
    Sap is sending PO data to VAN. At sender side Shall i go for IDoc Adapter or ABAP proxy?
    Please suggest me which one is better in all the scenarios.
    How to decide which is better for the above scenarios?
    Thanks In advance
    Venkatesh

    >
    venkatesh bs wrote:
    > Hi all,
    >
    > In my project, we are using 3 system(SAP R/3(ECC 6.0), Oracle and VAN). Data has to synchronize between these systems.
    >
    > 1. Oracle ->PI ->SAP R/3
    > Oracle system is sending Material master data to SAP R/3 ECC 6.0. At sender side I am using JDBC Adapter but at receiver side shall i go for IDOC Adpter or ABAP proxy? If I go for ABAP server proxy I need to create message type for material master in IR and then I have to write code in abap to insert MM data into tables in R/3. Please suggest which one will be better IDOC adpter or ABAP Proxy?
    >
    > 2.VAN->PI->SAP R/3
    >
    > VAN is sending Invoice data to SAP R/3. At sender side I am using Seeburger Adapter. At receiver  shall i go for IDOC Adpter or ABAP proxy?
    >
    > 3.SAP->PI->VAN
    > Sap is sending PO data to VAN. At sender side Shall i go for IDoc Adapter or ABAP proxy?
    > Please suggest me which one is better in all the scenarios.
    > How to decide which is better for the above scenarios?
    >
    > Thanks In advance
    >
    > Venkatesh
    Material Master - MATMAS
    Invoice - INVOIC01
    PO - ORDERS
    wouldnt the above IDoc suit you?

Maybe you are looking for