Empty Precalculated Value Set Tables?

We've successfully implemented Pre-calculated Value Sets in BW 3.5 using Reporting Agent.
Does anyone know how to get rid of, or empty pre-calculated value set tables that you no longer need? There are some reporting agent settings that I have deleted from reporting agent but they continue to appear in the Pre-calc value set variable as an available option when running the query. It's like the setting got deleted from reporting agent but the underlying table didn't?
Perhaps this is an issue for OSS but I thought I'd see if maybe there is an option I'm not aware of.
Thanks,
Chris

Thanks - I also found OSS note 825017 that seems to address the issue as well. We'll see if we can apply this note so we can get the ABAP program to delete or empty these tables. I think that will resolve the issue.
Thanks,
Chris

Similar Messages

Reporting Agent: Precalculated Value Set

Hi everybody,
After schedule package to get precalculated value set has finished, I need to know generated values...do you know what table stores that results?...
The job doesn't generate any spool, just an execution log!
any help is appreciated!
kind regards
Message was edited by:
CESAR BENITO

Hi,
You can use the TCODE REPORTING_AGENT in Bi7 to use reporting agent. But Reporting agent works only for 3.x queries it wont work for 7.0 queries. To precalculate or precache you can use information broadcasting in BI 7.0
Regards,
Raghavendra.

Precalculated value set through broad casting

Hi
If i schedule precalculated value set option in broad casting, if i schedule broad casting. wher can i cross check, its compelted and values are ready?

Hi
iam not sure where we can check whether in the tables or in the Process chain itself.
But I have got some info on Broad Casting
Please find the Links below
/people/sap.user72/blog/2005/12/23/summary-of-new-features-for-information-broadcasting-in-sap-netweaver-2004s
/people/community.user/blog/2006/12/28/exception-broadcasting-in-sap-netweaver-2004s
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/296edc90-0201-0010-7982-c6dc0b288296
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00d91245-1f5d-2a10-c795-8394960f56cc
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b485d390-0201-0010-8189-91444c74c69f
Hope this will help you
Many thanks
Kiran

Using Precalculated Value Set Characteristic in Query defined on an Infoset

Hi,
I am using a Precalculated Value set for a chracteristic in a Query defined on an Infoset. It shows direct read in SM50 . However I cannot see any SQL statement for the Query through RSRT or ST04 EXplain.
Thanks For your help in Advance..
Kind Regards

Hi..
Is it possible to use a Precalculated Value Set Characteristic Variable in a Query defined on an Infoset?
Thanks
Kind Regards
Anil

Valu Set Tables /BIC/OB*

Hi,
I am experiencing a strange problem with Value Sets. For some reason randomly a Value Set table getting deleted. The definition in Reporting Agent is there and the entry in RSRVTABLEDIR is there but the physical table /BIC/OB* getting deleted.
Does any body experienced similar problem?
What is causing the tables disappear?
Any help is greatly appreciated.
Thanks in advance.

Hi,
Check note 948599
regards Maarten

Precalculated Value Set - Query Designer - information Broadcasting NW2004

Hi Buddies,
Needs your help!
i have question regarding to the precalculated Value set distribution type for infomation Broadcasting NW2004.
According to my understanding, firstly i created a broadCasting setting Z_Test based on Query1 to calculated the value Set, for example , for company code.
And then in the Query Designer, New a Query2 which contains a Variable type precalculated value set and its default value point to the broadcasting setting created before.
but when i check the query, it present an error message : 'Default value for Variable 'PM_Comp' are not within permitted value range'.
could anyone can help me out with it?
Thanks a lot!!
B.R
Vivi

Hi,
I am also getting the same error. Have you got any solution ??
Regards,
Sheetal

Precalculated Value Set

Hi,
I am trying to do the setting for Precalculated Value Set....I have a Query with variables...But the problem is I am not able to see the characterisitic in the left window of Reporting Agent(Value Sets)....Any help is appreciated......

Shreya
I am not sure why it's not showing up but you could create your own characteristics by clicking create new settings button and assign reporting agent.
Thnaks
Sat

Diff between Precalculated Value set and Precalculated web template

Hi Friends
Can any one tell the Diff between Precalculated Value set and Precalculated web template
Where we will use these
Thanks

Hi,
The Reporting Agent is a tool used to schedule reporting functions in the background.
The following functions are available:
●      Evaluating exceptions
●      Printing queries
●      Pre-calculating Web templates
●      Pre-calculating characteristic variables of type pre-calculated value sets
●      Pre-calculation of queries for Crystal reports
go through,
pre-calculated value sets
[http://help.sap.com/saphelp_nw04s/helpdata/en/28/734d3caa70ea6fe10000000a114084/frameset.htm]
[http://help.sap.com/saphelp_nw04/helpdata/en/84/00783b3af21f5ee10000000a11402f/content.htm]
Pre calculating Web template:
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9e/9f653ade969f4de10000000a114084/frameset.htm
Basically when you have a Precalculated Template, the system first run a report (which has been scheduled) and read the data from there when you run your template. This can imrpove the performance respect to online read data.
[http://help.sap.com/saphelp_nw04s/helpdata/en/6e/b5663a5fb46752e10000000a11402f/frameset.htm]
[Pre calculated web template;
Hope this helps...

Precalculated value set in process chanin

Hi all,
Can anyone tell me wat is precalculated value set in process chains.
Regards,
Khaja.C

Hi
Pre calculated value sets are used for reporting purposes. They will act as inputs to queries where variables are used.
The values maintained in the value set will be substituted in place of variables in the query at runtime and the query output will be generated. This is done in process chain for automation purposes. Usually they are used in conjunction with BEx broadcaster.
With Regards

Value set table name in fusion app

Hi Team,
Can any one please tell me the table name which is used in fusion app to store the value set name which we create.
Thanks,Ajay

Sorry for the confusion, the FND tables are indeed in the OER and the FND_VS_VALUE_SETS can be found there. There is a data issue where content (prior of R8) was in correctly categorized such that its not available under "technology" product family and my query failed since used combination of both criteria. In any case just use "All versions" for the version criteria and the data will be returned. They are internally working to fix the product family for previous releases..
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

Problem in database link for value set table

Hi All,
We are using a table from a different database in our valuset. This database we are refering via a DBLINK. But the DBLINK name is again stored in a table and will change from instance to instance i.e (development and production).
Please let us know if there is a way to make use of the above table with out hardcoding DB link.
Eg: MRP_AP_APPS_INSTANCES - This table has the DBLINK name
Vauset uses - tablename@dblinkname
if we give
select * from tablename@(select A2M_DBLINK from MRP_AP_APPS_INSTANCES),
it gives the error database link name expected.
Is there any other way how we can avoid hardcoding the dblink name.
Please help.
Regards,
Shruti

Hi,
Please see if (Note: 427588.1 - Error When Using a Database Link in the Definition of a Value-Set) is applicable.
Thanks,
Hussein

DropdownByKey inside ALV Table - Problem with Value set

Hi,
I have Component A which has a custom controller that uses the interface controller of the ALV Component.
Custom controller has node ITAB.. that has certain attributes...
I want DropdownByKey inside the ALV Table column. I am populating the corresponding attribute of ITAB node with the value set that I want the drop down to have.
However when I execute the application..I get error
" Key XXX not present in Value Set and is not initial"
XXX is present in the Value Set table of the attribute.
Following is my code in the methods of CUSTOM CONTROLLER
Generate Value Set
nodeinfo_context = wd_context->get_node_info( ).
nodeinfo_ITAB= nodeinfo_context->get_child_node( wd_this->wdctx_ITAB ).
 Populate the Value Set
data ls_valueset type wdy_key_value.
data it_valueset type wdy_key_value_table.
ls_valueset-key = 'FRA'.
ls_valueset-value = 'FRANCE'.
Append ls_valueset to it_valueset.
ls_valueset-key = 'SFO'.
ls_valueset-value = 'SAN FRANCISCO'.
Append ls_valueset to it_valueset.
Set the Value Set for the Attribute
call method nodeinfo_ITAB->SET_ATTRIBUTE_VALUE_SET
 EXPORTING
 NAME = 'ATTR1'
 VALUE_SET = it_valueset.
Changing ALV Column
Get the ALV Configuration Model
ifc_alv2 = wd_this->wd_cpifc_alv2( ).
itab_alv2_config = ifc_alv2->get_model( ).
itab_alv2_config->IF_SALV_WD_TABLE_SETTINGS~SET_READ_ONLY( abap_false ).
Get the Column reference for ATTR1
ref_alv2_colset = itab_alv2_config->if_salv_wd_column_settings~get_column( 'ATTR1' ).
Create the DropDownByKey Object
CREATE OBJECT ref_dropdownkey
 exporting SELECTED_KEY_FIELDNAME = ref_alv2_colset->id.
ref_dropdownkey->SET_SELECTED_KEY_FIELDNAME( ref_alv2_colset->id ).
ref_alv2_colset->SET_CELL_EDITOR( ref_dropdownkey ).
Check the value set
ref_attr_info = nodeinfo_flight_details2->get_attribute( ref_alv2_colset->id ).
I do get back the value set if I see ref_attr_info->value_set.
SO the Value Set is getting set for attribute ATTR1, but still I get Error
"The value selectedKey = "SFO" in DropDownByKey "_8C" does not exist in the value list and is not initial either "
SAP User

You have forgotten to set a cell variant. I had the same with setting a ProgressIndicator cell-editor to a table column as default editor. This causes the column to be hidden on the table while it did show up in the settings dialog. I removed the set_editor( lr_progressindicator) and created a cell variant instead with this lr_progressindicator. You then need to add this cell variant to your column. By default it will select the standard viewtext-cell-editor (which can only be textview and inputfield, like when you create a table yourself in a view), but if you use a cell variant, it will display the required cell editor if you set it (last line of the code).
In your case, replace lr_progressindicator by your ref_dropdownkey.
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings,
 lr_column TYPE REF TO cl_salv_wd_column,
 lr_column_header TYPE REF TO cl_salv_wd_column_header,
 lr_cellvar TYPE REF TO cl_salv_wd_cv_standard,
 l_cellvar TYPE string,
 lr_progress_indicator TYPE REF TO cl_salv_wd_uie_progr_indicator.
lr_column_settings ?= wd_this->mr_table.
lr_column = lr_column_settings->get_column( 'STATUSBAR' ).
lr_column_header = lr_column->get_header( ).
lr_column_header->set_text( 'Completed' ).
CREATE OBJECT lr_cellvar.
l_cellvar = 'CV_SB'.
lr_cellvar->set_key( l_cellvar ).
CREATE OBJECT lr_progress_indicator.
lr_progress_indicator->set_percent_value_fieldname( 'STATUSBAR' ).
lr_progress_indicator->set_tooltip( 'completed' ).
lr_cellvar->set_editor( lr_progress_indicator ).
lr_column->add_cell_variant( lr_cellvar ).
lr_column->set_selected_cell_variant( l_cellvar ).
I hope this will solve your issues.

Cost Allocation Flexfield with Table Value Sets

Hi
I am setting up Costing for Payroll. I have a requirement where I want to use Table Validated value sets for Cost Allocation Flexfield. In the Administrator Guide it is written that we should not use Table validated value sets for any KFFs.
I still tried the same (defining Table validated value sets) and my process errored out. It was giving following error
Value 381 for the flexfield segment Cost Center does not exist in the value set
SJR_COST_CENTER_LIST.
invalid code combination:
381SJR_COST_CENTER_LIST is name of the value set.
Then I changed the value set and keep the code and meaning in the value set table as same and my process worked fine.
Now I want to know that should I use Table validated value set or not. As Oracle does not support these in KFFs

Hi Thierry
Thanks for the reply
have you used cross validation rules?I am not sure about cross validation rules and how we can use in my case.
An other thought: there is an action parameter available parameter_name=COST_API_IMODE
Set the parameter_value = 'Y'In my case my costing process is working fine, even when I define my table validated value sets. My question is should we define table validated values sets or not as Oracle does not support it now? Oracle use to support this for KFFs some time back but now they are saying they does not support.
Are there any known issues if we use Table validated value sets? Why Oracle does not support it for KFFs?

Create Value Set of Table Type

Hi,
Could you provide me a sample program for creating a value Set of Table type.
Thanks
Tim.

Hi,
I was able to create value set (table type) from the System Administrator and attached the value set to the Inventory Kanban DFF Form.
I'm having issue here, value set is created on Custom Table which has data as below :
EX:- Custom table has Item_Num: 101 , Lot_Num: Lot_1 & Item_Num: 102 , Lot_Num: Lot_2
When I go into DFF form in Inventory for item_Num: 101 it should only allow to enter Lot_1 but it is accepting Lot_2 also.
I must be missing some where clause in the value set setup.
Any suggestions?
R12 Version.
Thanks
Tim.

Oracle apps value sets

can any body tell me how to get the distinct values for a table valueset
from GL_CODE_COMBINATIONS table i want to get the distinct values of SEGMENT2 so any body tell me how to create a table value set for this its very very urgent.
Regards,
Azeez
[email protected]

Hi
When u create table value sets
Table columns-----------
Value-
Meaning
-ID------------distinct(id) from that table
it will work fine let me know if u ned anything.
Rakesh

Empty Precalculated Value Set Tables?

Similar Messages

Maybe you are looking for