Empty row removal

I have copied and pasted information into a spreadsheet. There are blank/empty rows that are not adjacent that I would like to remove. There are 1400 pages so I don't want to do it manually. Is there a way to do it automatically?

Open up the Reorganize window
Filter to show only rows that are blank.
Select all but one of the blank rows and delete them en masse.
Unfilter
Delete the last blank row.

Similar Messages

How to delete empty row without validation error in ADF Table(EMP)

Hi Everyone,
I am using EMP Table in ADF jspx page to insert the data into database.when i insert a row into table by createInsert operation,it inserting the row.But I need to delete that row immediately with out entering any value.
But it showing some validation error at empno.Is there any ways to delete the empty row?if not,what are the reasons that we can't delete the row.
could any one tell me the reasons!!
Thanks in advance!!
With Best Regards,
Amar
Edited by: 973755 on Dec 11, 2012 6:42 AM

Amar,
I am little confused with your logic here.....
but if you are trying to remove the row by clicking Remove button, you can set the immediate property to true and that remove function will run without executing any entity validation.......
-R

Query against materialized view from stored procedure brings back empty row

I have a stored procedure that runs a query against a materialized view. When I run the query outside the SP it works just fine. When I change the MV to a table name, the SP works. When I change it back to the MV i get an empty row. Any ideas? The code is below:
PROCEDURE getAuth     (p_naid        IN NUMBER,
                         p_scope       IN VARCHAR2,
                         o_xml_data    OUT SYS_REFCURSOR
                         ) IS
BEGIN
    IF p_scope = 'Approved' THEN
      OPEN o_xml_data FOR
        SELECT naid,
               p_naid,
               auth_type,
               xml_data
        FROM some_mv
        WHERE naid = p_naid;
      RETURN;
      CLOSE o_xml_data;
... the rest of the procedure ...

does procedure contain EXCEPTION handler?
if so, then remove, delete & eliminate EXCEPTION handler (at least during testing & debugging)

Button to delete all empty rows

I am in the process of creating an interactive form that has a button that add rows for the user to input issues and another button to add follow-ups to those instances. There are 3 different sets of these. However, we do not want to add a delete button to all rows, to allow for accidental deletion of already inputted data. I would like to create a button that will delete all empty rows, including all subforms. Either that, or upon saving the document, all empty rows would be deleted - whichever would be easier. Please help! This seems like it will be a complicated task and I am not that well versed in LiveCycle to be able to figure this out on my own.
Thank you!

There is no doubt that looping through nested repeating objects is more complex:
Here is the script for the first table with follow-up rows:
// Technical
var nCount3 = VitalsSubform.Technical._Instance1.count;
for (var k=0; k<nCount3; k++)
     // this is script to remove the follow-up rows in the first table only
     var nCount6 = xfa.resolveNode("VitalsSubform.Technical.Instance1[" + k + "]").Table1._Row1.count;
     // loop through the rows in the follow-up table
     for (var i=0; i<nCount6; i++)
          if (xfa.resolveNode("VitalsSubform.Technical.Instance1[" + k + "].Table1.Row1[" + i + "]").Cell4.rawValue == null)
               // remove null row
               xfa.resolveNode("VitalsSubform.Technical.Instance1[" + k + "]").Table1._Row1.removeInstance(i);
               // recount nCount in case a row has been deleted
               nCount6 =xfa.resolveNode("VitalsSubform.Technical.Instance1[" + k + "]").Table1._Row1.count;
               // account for the row that is now deleted
               i = i-1;
     // now remove null statements
     if (xfa.resolveNode("VitalsSubform.Technical.Instance1[" + k + "]").Table1.Statement.Statement.rawValue == null)
          VitalsSubform.Technical._Instance1.removeInstance(k);
          var nCount3 = VitalsSubform.Technical._Instance1.count;
          k = k-1;
It is by no means tested and could still be flaky.
Have you considered a manual 'x'/delete button for the follow-up rows?
Here is the form: https://acrobat.com/#d=JMGUKXNQ*qMD18S3W5VxSQ
Niall

Delete empty rows while having empty xml tag

I've seen something like same but it doesn't work for me. I have a table which is created using xml rules, some time it contains empty xml tag also converted into row but I don't want these empty rows. After table creation empty rows need to be deleted.
I've got this script from this forum which delete empty rows
for(var i=myDocument.textFrames.length-1; i>=0; i--){
for(var j=myDocument.textFrames[i].tables.length-1; j>=0; j--){
   for(var k=myDocument.textFrames[i].tables[j].rows.length-1; k>=0; k--){
    myContents = 0;
    for(var l=myDocument.textFrames[i].tables[j].rows[k].cells.length-1; l>=0; l--){
     if (myDocument.textFrames[i].tables[j].rows[k].cells[l].contents != "") myContents++;
     if (myContents == 0) myDocument.textFrames[i].tables[j].rows[k].remove();
but incase of any cell contains empty xml element it goes blank. Could any one help on this.
Thanks
Mac

Gyan,
Thanks for your help. I have modified the code as below:
public void removeblankline()
OAViewObject rvo = (OAViewObject)findViewObject("NCRPaymentExtLineVO1");
Row row[] = rvo.getAllRowsInRange();
System.out.println("Remove all blank rows");
System.out.println("Total Rows"+rvo.getRowCount());
int jcount = rvo.getRowCount();
for (int j=0;j< jcount;j++)
NCRPaymentExtLineVORowImpl rowj = (NCRPaymentExtLineVORowImpl)row[j];
System.out.println("Check Line Number: "+j);
System.out.println("Line Type Lookup Code: "+rowj.getLineTypeLookupCode());
if((rowj.getLineTypeLookupCode()==null)||("".equals(rowj.getLineTypeLookupCode().trim())))
System.out.println("Removed Line Number: "+j);
rowj.remove();
System.out.println("Processed with Line Number: "+j);
} // end removeblankline
This is the change I have done:
int jcount = rvo.getRowCount();

Advanced Table delete empty rows

Hi
I added logic to add 10 empty rows and to delete the empty rows when the form is submitted. But somehow it only deletes the rows in current screen of the Advanced Table. if there are 15 rows and I click next to go the last 5 and submit the form it deletes only the 5 empty rows but not the other 10 rows in the previous section.
where am I doing wrong?
Thanks
    Row [] row = null;
    ExpAttendeesVORowImpl rowi = null;
    if( expattendeesvoimpl1 != null )
        row = expattendeesvoimpl1.getAllRowsInRange();
        System.out.println("No of items "+row.length);
    for (int i=0;i<row.length;i++)
         pageContext.writeDiagnostics(this, "in loop ", 2);
         rowi = (ExpAttendeesVORowImpl)row;
pageContext.writeDiagnostics(this, " in loop row "+ rowi.getName(), 2);
if((rowi.getName() == null))
pageContext.writeDiagnostics(this, "deleting row"+ rowi.getName(), 2) ;
rowi.remove();
Thanks

you could instead try using:
expattendeesvoimpl1.getFilteredRows("Name", null);

Empty rows don't show

Hello Experts!
I have a crosstab, which contains Years on the left and some statstic values on the right for each Schools. Since not all schools have data for each years. My crosstab will skip some rows when no data have found for some years of the school. But I want to show all rows even no data was found.
Although I have checked all "YES" for "Show rows with empty measure....", "Show empty columns", "Show rows with empty dimension values", "Show empty columns", "Show rows with empty dimension values" and "Show when empty" in Edit Format - Display properties.
The empty rows just won't show up. Did I miss something? Please help all experts.
Thanks.

Hi Jonathn,
Have a look on the SAP note 1295827 - When unticked, the 'Show when empty' property for a table in a WebIntelligence report does not work as expected if the table contains null values.
Symptom
'Show when empty' property for a table does not work as expected in WebIntelligence report when it is unticked.
If table contains null values, this does not work.
Need to hide the table but it is always displayed.
Reproducing the Issue
Open Club.mdb & remove 'French Riviera' from Resort table.
Login to Infoview & create a new WebIntelligence report using Island Resorts.unv selecting Country and Resort objects. Insert condition on Country=France. Run query.
Remove <Country> column from the table.
Select the table and go to Properties.
The option 'Show when empty' is ticked by default. Untick this -> The table is still displayed.
WebIntelligence XI Release 2
WebIntelligence XI 3.0 & 3.1
Cause
If this is unticked & the table contains null values, the table is still displayed. This is normal behaviour - this feature does not work with null values in a table.
Resolution
The 'Show when empty' functionality, when unticked, only hides the table when it is entirely empty, i.e. when no rows have been returned in the query. It is then only visible in 'Structure' mode.
For hiding a row which is empty, untick the option/s 'Show rows with empty measures/dimensions'. But the entire row must be empty before it will be hidden by this feature.
Make use of this for good report design if there are many tables/blocks within the report. If the tables are empty, it's best if they are hidden from view.
I hope this will help.
Regards,
Hitesh

Change paragraph style of empty row using GREP

Hello again ... another GREP query if anyone can assist!
How can I change a completely empty paragraph line (like those found between verses in a poem, for example) to a different paragraph style so I can control the space better using GREP?

Fair point ... but if I demonstrate:
Text line here
Text line here
Text line here
Text line here
Text line here
Text line here
The empty row (4) between the two blocks is in the same paragraph style as the rest of the text. Indeed if lines 3 or 5 were in different styles I could remove the empty row and create a space using before/after spacing. But it is all in the same style. I was wondering if there was a way using GREP to change the para style of an empty row ie 4.

Empty rows in advanced table

Hi there,
In my advanced table with multiple selection check box, I have the logic to insert 10 rows into the view object before the table is rendered. So my table display 10 new blank rows.
Assume user only enter 3 rows and I don't want to save those 7 empty rows. How can I recognize the 7 empty rows and remove them from the VO?
Please advise.
thanks,
Charles

Hi Charles,
You may be dispalying some columns on OAF page, check all thos for null, if every field is Null then it is unused and you can remove it.
This is sample code:
public void deleteUnusedLines()
XXEGASRLinesVOImpl pervo = getXXEGASRLinesVO1();
if(pervo==null)
Row row[] = pervo.getAllRowsInRange();
System.out.println("No of items "+row.length);
for (int i=0;i<row.length;i++)
XXEGASRLinesVORowImpl rowi = (XXEGASRLinesVORowImpl)row;
if((rowi.getItemDescription()==null)||("".equals(rowi.getItemDescription().trim())))//add more conditions here to locate empty rows.
rowi.remove();
Regards,
Reetesh Sharma

InDesign Table - Collapse empty Row

My apologies if this is not posted in the proper category...
Ok, here's my issue...
I have a table with 5 rows. Sometimes, not all of the rows in the table will contain data. Is it possible for InDesign to automatically collapse a row if there is no data present in the cells in that row?
Thanks!

Jongware has probably answered this already, but if not:
To run a script in InDesign, copy the code and paste it into
an ordinary text editor (such as Notepad in Windows), then
save the file with the extension .jsx in the Scripts Panel Folder
(typical path: Start > MyComputer > Local Disk(C:) >
Program Files > Adobe > Adobe InDesign CS3 > Scripts >
Scripts Panel).
It will then be available from within InDesign (Window > Automation > Scripts).
Yesterday's script removes empty rows from all tables in a document.
You might find the script below a bit more convenient, as it removes
empty rows in selected tables (or tables in selected text) only.
To run the script, highlight a table or some text containing a
number of tables, and then double-click on the name of the script in
the Scripts panel.
var mySelection=app.activeDocument.selection[0];
try{ var myTableCount = mySelection.tables.length;}
catch(myError){ var myTableCount = 1;}
for (var i=myTableCount-1; i >=0; i--) {
try{ var myTable = mySelection.tables.item(i);}
catch(myError){var myTable = mySelection; }
for(var j=myTable.rows.length-1; j>=0; j--){
            var myContents = 0;
            for(var k=myTable.rows[j].cells.length-1; k>=0; k--){
                if (myTable.rows[j].cells[k].contents != "") myContents++;
            if (myContents == 0) myTable.rows[j].remove();

How can I create an empty row on a #TempTable based on an input parameter

So if my Line of Business is 'MC' or 'MG', I have to go over to Oracle and get its data accordingly. Then, when I create my final report result set, I think I'll want to UNION in that result set if my Parameter is 'MC' or 'MG'. I don't think I can UNION
based on the value of the Parameter. So my thought process was to create an empty row on my #TempTable so when I UNION and my parameter is NOT 'MC' or 'MG' then it will have nothing to UNION in. My struggle is how do I create an empty row in my #TempTable
if my parameter is NOT 'MC' or 'MG'
If I am wwwaaayyy off here, please tell me so.
This is my #TempTable Creation SQL...
IF EXISTS
(SELECT 1
FROM [#TempTable_LineOfBusiness_Parameter]
WHERE [#TempTable_LineOfBusiness_Parameter].[RESULT] IN ('MC','MG'))
BEGIN
SELECT *
INTO [#TempTable_Market_Prominence_Member_Data]
FROM OPENQUERY
(RPDMHF,
'SELECT HCFA_NAME_ORG.NAME_ID,
HCFA_NAME_ORG.MEMBER_ID,
HCFA_NAME_ORG.HIC_NUMBER,
MEMBER.NAME_FIRST,
MEMBER.NAME_LAST,
HCFA_DATE.START_DATE,
HCFA_DATE.END_DATE,
HCFA_NAME_ORG.COUNTY_CODE,
HCFA_NAME_ORG.PART_A_PAYMENT,
HCFA_NAME_ORG.PART_B_PAYMENT,
HCFA_NAME_ORG.STATUS,
HCFA_NAME_ORG.ORG_ID,
HCFA_NAME_ORG.PLAN,
HCFA_NAME_ORG.ENROLL_DATE,
HCFA_NAME_ORG.PBP_ID,
HCFA_DATE.VALUE
FROM SC_BASE.HCFA_DATE
LEFT JOIN SC_BASE.HCFA_NAME_ORG
ON HCFA_NAME_ORG.NAME_ID = HCFA_DATE.NAME_ID
LEFT JOIN AMIOWN.MEMBER
ON TRIM(MEMBER.MEMBER_NBR) = TRIM(HCFA_NAME_ORG.MEMBER_ID)
WHERE HCFA_DATE.INDICATOR = ''plan''
AND HCFA_DATE.START_DATE >= ''2015-01-01''
END
If I add an ELSE, it always comes back and tells me the #TempTable_Market_Prominence_Member_Data already exists. As if it's creating it regardless of the Top IF.
Thanks for your review and am hopeful for a reply.

Hi ITBobbyP,
The error came back from your ELSE Statement most probably caused by the reason mentioned in Hoffmann's post.
Regarding your requirement, I would suggest you CREATE the [#TempTable_Market_Prominence_Member_Data] explicitly.
CREATE TABLE [#TempTable_Market_Prominence_Member_Data]
NAME_ID INT,
MEMBER_ID INT,
HIC_NUMBER VARCHAR(99),
NAME_FIRST VARCHAR(99),
NAME_LAST VARCHAR(99),
START_DATE DATE,
END_DATE DATE,
COUNTY_CODE VARCHAR(99),
PART_A_PAYMENT MONEY,
PART_B_PAYMENT MONEY,
STATUS VARCHAR(99),
ORG_ID INT,
PALN VARCHAR(99),
ENROLL_DATE VARCHAR(99),
PBP_ID INT,
VALUE INT
IF EXISTS
(SELECT 1
FROM [#TempTable_LineOfBusiness_Parameter]
WHERE [#TempTable_LineOfBusiness_Parameter].[RESULT] IN ('MC','MG'))
BEGIN
INSERT INTO [#TempTable_Market_Prominence_Member_Data]
SELECT *
FROM OPENQUERY
(RPDMHF,
'SELECT HCFA_NAME_ORG.NAME_ID,
HCFA_NAME_ORG.MEMBER_ID,
HCFA_NAME_ORG.HIC_NUMBER,
MEMBER.NAME_FIRST,
MEMBER.NAME_LAST,
HCFA_DATE.START_DATE,
HCFA_DATE.END_DATE,
HCFA_NAME_ORG.COUNTY_CODE,
HCFA_NAME_ORG.PART_A_PAYMENT,
HCFA_NAME_ORG.PART_B_PAYMENT,
HCFA_NAME_ORG.STATUS,
HCFA_NAME_ORG.ORG_ID,
HCFA_NAME_ORG.PLAN,
HCFA_NAME_ORG.ENROLL_DATE,
HCFA_NAME_ORG.PBP_ID,
HCFA_DATE.VALUE
FROM SC_BASE.HCFA_DATE
LEFT JOIN SC_BASE.HCFA_NAME_ORG
ON HCFA_NAME_ORG.NAME_ID = HCFA_DATE.NAME_ID
LEFT JOIN AMIOWN.MEMBER
ON TRIM(MEMBER.MEMBER_NBR) = TRIM(HCFA_NAME_ORG.MEMBER_ID)
WHERE HCFA_DATE.INDICATOR = ''plan''
AND HCFA_DATE.START_DATE >= ''2015-01-01''
END
Explicitly creating the temp table will offer below benefit in this case.
The ELSE statement is no longer needed, if the no rows get inserted into that table, it has nothing to union an empty table.
With the column datatype defined, you can avoid such conversion error
SELECT NULL AS COL1,NULL AS COL2 INTO #T
SELECT COL1,COL2 FROM #T
UNION
SELECT 1,'ABC'--Conversion failed when converting the varchar value 'ABC' to data type int.
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support

How to insert an empty row on a matrix with multiple loaded lines?

Hi.
I want to insert an empty row on my form's matrix. Currently I am using the <b>AddRow </b>method, as it is:
// C# - it's mandatory to give parameters to the method (=
oMatrix.AddRow(1,1)
But, when the matrix already has some rows (at least 1), the method <b>AddRow </b>inserts the new line as a copy of above line, then, I have to manually clear all cells.
Any idea on this?
Thanks in advance.

If you matrix is bound to a dbDatasource you can insert a record in the dbdataspurce instead of using matrix.AddRow... If not only way to do it is by clearing the row after add

How can I leave an empty row?

Hi,
If I want to use GridBagLayout, how can I leave an empty row? Or empty column? When I create the buttons on a frame, are they created sequentially? so Is that mean I can't put something back to the first row later in the program? Thx.
Adrian

I'm just guessing, since I havent done Java for a long time... but if you want an empty row... what pops up in my mind first is like putting in an empty JLabel/Label... for that row... but then if you wanna fill it in... i dunno...

SSRS- Hide Empty Rows

Hi,
I am having a difficult time deleting empty rows in a table. I used HideDuplicates under properties to hide any of the duplicated data but now it is leaving me an empty row in the table. I tried to use the following codes but none of them seemed to work:
=Iif(Previous(Fields!Apps.Value) = Fields!Apps.Value, True, False)
=IIF(fields!Apps.value IS NOTHING, True, False)
=isnothing(fields!Apps.value)
=if(Fields!Apps.Value = "",
true, false).
=IIF(IsNothing(Fields!Apps.Value),True,False)
=iif(Fields!Apps.IsMissing,True,False)
Might anyone know another code I might use to delete the empty rows?
Thank you in advance!

What you are looking for is probably the Visibility option not the HideDuplicates. You can right click on the row and choose
Row Visibility. Select "Show or hide based on an expression" and put in the expression that resolves to true to hide the row, and false to show it.
The HideDuplicates field that you are using is there to hide duplicating text and not entire rows. For example if you have:
Value1
5
Value1
15
Value1
20
Value2
10
You would then get:
Value1
5
15
20
Value2
10
I hope that helped.
Regards,
Andrew.

Appending empty rows in internal table

Hi,
i am using table control, where there is a condition, some row may left empty. end if i press enter button the empty row is filled by the next available record. My need is to pick the records in the table control to the internal table including the empty rows as it is.

Hi Karthikeyan,
By default with user pressinng enter, empty rows will get deleted.
How are you populating your table control? Is it from standard transaction or your internal table?
If it is from your internal table, you can add anothe flag field for empty row.
Whenever row is empty in your internal table, mark flag field as 'X', so in the table control you these entries will not get vanished with pressing of enter.
This is one idea and you can build on this. You can make this flag column as non editable so that no one can change these.
hope this helps,
ags.

Empty row removal

Similar Messages

Maybe you are looking for