"Empty" Select Community screen in Nokia Social 1....

Hi everyone,
Recently I obtained N8 and am trying to use Nokia Social (I tried both 1.1 and 1.2).
In "Select Community" screen, I guess Twitter and Facebook icons or such are supposed to be shown. However in my case, no icons are displayed(only the title "Select community" and "Cancel" button are shown), so I can't choose / set up any social network services at all.
"Add social network" brings me the same empty screen. I tried several uninstall / re-install and hard reset, but the problem won't go away.
Of course I have Twitter / Facebook account, and Nokia account as well.
Do you have any clue?
Thanks in advance,
MH

I've post this also on other discussions threads!
Have the same problem...
Traced it back to the operator SIM.
With my operator SIM the Community list stays empty.
I tried a SIM I've purchased while on vacation in the Netherlands and upon starting Social I finally got the option to select either Facebook or Twitter.
The dutch SIM is more than a year inactive, it didn't roam with my local operator and thus I had no GPRS connection. Social was working over WiFi.
After configuring my facebook account and twitter and successfully using it, I tried it again with my Operator SIM but got the message "Your access to the service has expired. To upgrade your service, please contact your operator." when I try to access my facebook account via the Social application!
Either now I have to bark at my GSM Operator to have them upgrade my SIM or enable something in their network or Nokia have to change the Social application so it can work regardless the Operator you may be using!
Hopefully this sheds some light on how to fuurther proceed with this problem!
Regards...

Similar Messages

Nokia N8 empty select community screen no solution...

It has been a week since I have gotten my N8 and to my dissapointment, the Social app is not showing a facebook or twitter icon and I am stuck with a blank Select Community screen.
I have tried uninstalling, updating to 1.2, factory resetting (which resulted in losing my paramount and nat geo app) and I still cannot fix this. Can nokia do something about this? There are multiple threads all around the world with this problem as well and I need a solution fast.

I've post this also on other discussions threads!
Have the same problem...
Traced it back to the operator SIM.
With my operator SIM the Community list stays empty.
I tried a SIM I've purchased while on vacation in the Netherlands and upon starting Social I finally got the option to select either Facebook or Twitter.
The dutch SIM is more than a year inactive, it didn't roam with my local operator and thus I had no GPRS connection. Social was working over WiFi.
After configuring my facebook account and twitter and successfully using it, I tried it again with my Operator SIM but got the message "Your access to the service has expired. To upgrade your service, please contact your operator." when I try to access my facebook account via the Social application!
Either now I have to bark at my GSM Operator to have them upgrade my SIM or enable something in their network or Nokia have to change the Social application so it can work regardless the Operator you may be using!
Hopefully this sheds some light on how to fuurther proceed with this problem!
Regards...

Nokia Social, some other apps not working on 701/B...

I have a 701 on which I recently installed Belle FP1 and the Microsoft Apps.
Immediately after the FP1 upgrade, I think that everything except Google maps worked, but now, a few weeks later, several apps have stopped working, most notably Nokia Social. When I try to start Social, I get the 'welcome to social' screen, then a spinning circle, then Social closes with no error message.
I have similar problems when I try to open Bloomberg and RamInfo apps and a game called color line, all of which worked until recently.
I have deleted and reinstalled all the Social components (1.5.216, available from the store and from the software updater) but it makes no difference. The same is true of the other apps that don't work. I have also reinstalled the FP1 firmware (112.010.1404 via Nokia Suite), which also changes nothing.
Everything else seems to work properly, except that Nokia Maps also sometimes, closes when I try to open it, although it always works on the second or third attempt.
I would be very grateful for any suggestions on how to fix this.
Many thanks
Alan

Thanks for your comments. I haven't managed to get it workding yet, although I have discovered one more piece of information. Every time I try to run Social (just the app, not even the widget) the background program 'AllWrtWidgets' stops running. I can only get it running again by re-starting the phone.
How might this be related to my problem, and does it suggest a fix?
I haven't tried a hard reset, because I know from experience that this deletes some apps loaded by Nokia Taiwan (including a very useful English<->Chinese dictionary) which are not reinstalled with a either a new firmware or a backup restore. So after a hard reset I will end up going to Nokia Care anyway, and they will do a fresh install whatever the problem.
Alan

Nokia Social has stopped working

For the last 2 days Nokia Social app (808 Pureview) has stopped working. I have obviously checked:
correct account settings
deleted and added the account again
there are no connectivity issues on the device
The issue seems to be related the Social App itself. See attached error message.
P
My Nokia history:
2110 => 6110 => 8110 => 6310 => 2300 => 2600 => 6070 => E71 => N97 Mini => E72 => C7 => E7 => E6 => 700
Attachments:
newscreenshotapp4.jpg ‏49 KB

You might need to uninstall the Social Application on your phone and then install a new one.
To uninstall:
Go to Menu.
Settings.
Choose Already Installed.
Scroll down to Social.
Press and hold on it and then select Remove.
Remove the Social Installer as well.
To install the latest version, just run the SW update of the phone and then install New Social.
Please let us know it this helps.
Regards,
Ricky07
If you think this post is helpful, please click the white star below.

New nokia social 1.4!

Hello MODS,
I've heared about the new nokia social 1.4 from online news published 01/14/2012 and its support for new features as notifications, events, syncing contacts and dedicated facebook and twitter widgets. I am planning to buy nokia 701 very soon but i wanna ask if this new is still laggy, does it crash and what about the notifications is it push or manual refresh?

Yes dedicated facebook and twitter apps and widgets are there. Nice thing.
701 is not at all lagging. From my experience of 2 months use, the phone is just robust it just won't crash.
Notifications are of course push.
701 is highly recommended. Man it can multitask upto 25 to 32 apps without hanging or slowdown. Well I hardly use 5 apps running.
-------------------If this post helped you, click on accept as solution.------------------
-----------------------------Appreciate by clicking on white star.----------------------------

How to transport a select - option screen in dialogue programme

hi Techies
I have Created select-option field in dialogue program ( With the help of SUBSCREEN)
Now i need to Transport this Select option Field To Live Server ....
Poblem is select-option field is not updating in Live server ....
i have changed some logic in the flow logic of select-option screen. (Just added the F4 help in flow logic)
while transporting it is fetching the standrd select option field & Flow logic...
not the changed one ..........?????????
plz suggest me possible way to accomplish my requirment.
Regards
Prasad

HI,
check these links for sample codes
Display Select option in module pool screen
Select-Option Extension box in Module Pool
http://sample-code-abap.blogspot.com/2008/06/select-option-in-module-pool-screen.html
Regards,
Anirban

In Twitter & tweet contains TMI-when I click on link to open it I get an empty TMI.me screen. Started a few days ago. Tried Explorer & it works so it is definitely a Firefox problem. Can anyone tell me how to resolve it?

When in Twitter & someone tweets using TMI - when I click on the link to open it I get an empty TMI.me screen. This is a new problem - started a few days ago. In frustration I tried Explorer today to see if I have the same problem there & I don't so it is definitely a Firefox problem. Can anyone tell me how to resolve it? Wld hate to have to use Explorer!

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Nokia Social 1.5 - N8 - Belle Official - Unknown P...

I kept getting "Unknown Problem. Please try again later" message whenever I log into the nokia social 1.5 facebook app. But when i try a different user account, I can login without problems. Upon checking the facebook website, I noticed that the nokia social is not included in my app list, unlike on the other account which has it. How do I add the nokia social app into my facebook? This is very different from the fmobi app, wherein if I delete fmobi in the app list in facebook website, it automatically adds it whenever I login to fmobi. I was hoping to try the nokia social app because of the widgets. Please help.
Solved!
Go to Solution.

Just found out how to do it: when logged in Facebook find the application (Ovi by Nokia) an allow access to your account.

HT1689 can't get itunes updates on ipad, but can get everything else...genius, purchases, etc. When I select "updates" screen is blank. Any ideas??

Can't get itunes updates on ipad, but can get everything else...genius, purchases, etc. When I select "updates" screen is blank. Any ideas??

The update server is down; try this temporary workaround
App Store>Purchased>Select "All"
Note: Look out for apps that have the word "Update"
http://i1224.photobucket.com/albums/ee374/Diavonex/9c256282736869f322d4b3071bbb2 a82_zps51a6f546.jpg

A BUG in Nokia Social 1.3

I have a problem which i cant seem to fix. I reinstalled my C7's 024.001 firmware today through latest nokia software updater. Everything seems to be working perfectly until i create widget or even if i create facebook or twitter account in 'nokia social app' it keeps on connecting to wifi and its like in every few seconds when wifi switches off it connects to it again. I even reinstalled nokia social but it didnt help except when i delete the app or logout from it completely, only then everything returns to normal. Can anyone PLEASE help me out with it?

The only way I can see it working is if the direct-to-field mapping is writable and the 1:1 is set as read-only since otherwise, if the OBB reference is null, it means the objects PK is null. I'm not sure how it was even queried with a null OBB as it means its OBA.id is null as well. This worked in 904 as it did not correctly validate PKs in the uow - this was fixed through bug 4569755. If you feel this should not have been changed, please file it with support and the fix can be revised.
The way I have mapped this in the past is that tab1 and tab2 are linked using the pks have same name option in the workbench (this makes tab2.id dependent on tab1.id). The OBA object then would have an id attribute that would represent the tab1.id and be writable, and if required, a 1:1 representing the OBB reference that was read only - allowing the OBB reference to be null if OBA entries can exist independently.
Best Regards,
Chris

Multiple selection in screen

hi all,
Is there any method to display multiple selection (single,ranges,...) (like select-options screen in report programming) in dynpro screens (using screen designer).
regards
Jose

Hi,
In the screen text box properties in the DICT tab you can specify search Help, where u can allow multiple entries to the box.
Cheers,
Chandru

How to number and message screening in nokia 5630?

hi
can anyone tell me, how to use the number and message screening in nokia 5630. it is a mobile with s60 platform and has number and message screening mentioned as its built in specification. i cant figure it out how?

Hi Len,
actually I thought about highlighting a word, phrase, or passage, holding it with the mouse, and then shifting it around within the text to the desired place, just as I used to do when I owned a PC. Does this work with Mac as well?
Frank

Change Lock Screen in Nokia X3-02

Hey there, is it possible to change the locking screen of nokia X3-02? it is really annoying! i heard that by changing to some themes it also changes the locking screen, but i like the default theme i just wanted to change the horrible locking screen!
Is it possible? at least it should be!

Check this software : carbide.ui
http://www.developer.nokia.com/info/sw.nokia.com/id/bb173537-4e67-496f-9967-50917d5cfc47/S60_Theme_S...
It should help you. By default, the standard theme is loaded. But you just need to change
one picture (ie the lockscreen), and export the whole thing in nth.file.
Then, just transfer the file in your cellphone, and it should work. At least, it did for me.
Here's a better illustration (see attachment)
If you have any question, you're welcome.
Attachments:
Capture.PNG ‏64 KB

Skiping initial selection criteria screen of HR report for Manager Desktop

Dear All,
The reports are configured using a custom scenario (Z Scenario) for Manager Desktop and used over the Portal through MSS. I have a requirement where for only one report (named Expired Qualifications) the initial selection criteria screen which comes when accessed through portal needs to be disabled or skipped and directly the transaction S_AHR_61015536 for this report needs to be called.
Please provide the inputs if it can be done and how for one report only.
Regards,
Samir

Dear Sen,
I have checked the thread suggested by you but the report here is not independent transaction integrated using iView. It is a part of Scenario which makes the reports available to the managers. It uses MSS Standard iView "Reports" and "Selection Criteria". Both iViews are in one page as delivered by SAP. The reports iView displays all the reports configured in the scenario for Manager Desktop and Selection Criteria iView is launched first in the portal content area when the report ( "Expired Qualifications") link is clicked from the Reports iView.
Regards,
Samir

Empty selection options after report run

Hi,
After the execution of my abap report sap returns to the selection options screen in which all the selected values from the run are still mentioned. How can i refresh the selection screen (so no values in the selection options after the report run) ?
this is the code (all parameters as you can see) :
parameters : p_matnr   like mara-matnr default ''.
parameters : p_werks   like mard-werks default 'XYZ',
                p_lgort   like mard-lgort default ''.
selection-screen skip 1.
parameters : p_qty     like sy-tabix default 1.
selection-screen skip 1.
parameters : p_file    like RLGRAP-FILENAME memory id GXD.
with regards

hi
i tried for select-options try for parameters
at selection-screen .
if sy-ucomm = 'ONLI'. " Only when execute is pressed
v_low = s_kunnr-low.
v_high = s_kunnr-high . " Hang on to this for select statement
clear s_kunnr[].
clear s_kunnr. " Clear the screen parameter
endif.
for your program
data : matnr like mara-matnr, " variables are taken so that we can have the values for further                                     operations
      werks like mard-werks,
       lgort like mard-lgort,
       qty like sy-tabix,
       file like RLGRAP-FILENAME.
at selection-screen.
if sy-ucomm = 'ONLI'. " Only when execute is pressed
matnr = p_matnr.
clear p_matnr.
werks = p_werks.
clear p_werks.
lgort = p_lgort.
clear p_lgort.
qty = p_qty.
clear p_qty.
file = p_file.
clear p_file.
endif.
start-of-selection. " write what ever code you have for the start-of-selection
NOTE "Remove the memory id for p_file otherwise it will not be cleared
regards
prasanth

"Empty" Select Community screen in Nokia Social 1....

Similar Messages

Maybe you are looking for