Empty Slideshow Error (there are no empty slideshows)
Hello All,
I am using iDVD 7.0.3 and I keep getting the following error message:
* There is an empty slideshow in your project. Make sure every slideshow contains at least one image, or delete any empty slideshow before burning this project.
when I attempt to burn my disc. I have checked and rechecked and checked again and all of my slideshows have images in them. Does anyone have any suggestions? Thanks!
_Kyle
I've got the same problem as well. From what I can guess, it looks like the iTunes application on the secondary Mac is streaming the photos, but stalls out in order to build a cache of thumbnails or appropriately sized images to send over to the AppleTV.
The AppleTV isn't expecting the connection to the Mac to take as long as it does to build the streaming image library and then pauses/timeouts while the library is being built.
I'm not sure if the library gets cached so the AppleTV doesn't pause during reconnections and reboots but if that is the issue, it would be nice if Apple updated iTunes to be able to keep the AppleTV streaming library cache current so the pause/timeout doesn't occur when everyone is gathered around the television.
Similar Messages
-
Trying to make a Xmas Card in iPhoto on my Mac i5. When card is made I hit "Buy Card", but I get "card incomplete" because it says there are empty photo templates that haven't been filled. Only I have filled them all!. There are no empty ones left to fill! Now what?
Thanks for the help.Only I have filled them all!. There are no empty ones left to fill! Now what?
Some text do look like they were final texts, that cannot be filled, but they are also place holders, for example the "Season's Greetings".Have you really clicked on each and every text, to see if they need filling in? -
I have a simple column chart grouping on 1 value on the category axis. For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis. I right click on the data series and choose "Add calculated series...". I choose moving average. I want to move the average over at least 2 periods.
When I run the report, I get the error "Formula error - there are not enough data points for the period". The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5). When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
I don't think this is entirely acceptable for our end users. At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart. Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
Thank you,
DanI was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
<ChartFormulaParameter Name="Period">
<Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
</ChartFormulaParameter>
What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
A side note:
If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML. -
J2ee1.4 installation error - there are no files requiring installation
hi all,
i downloaded the j2ee sdk 1.4 bundle and installed successfully on my suse 8.2. however when i tried doing it on another suse 8.2 machine using the same bundle i got an error that says :
There are no files requiring installation - here's all the output -
Checking available disk space...
Checking Java(TM) 2 Runtime Environment...
Launching Java(TM) 2 Runtime Environment...
Error: There are no files requiring installation.
Deleting temporary files...
i'm new to j2ee so plz, if any one knows how to get around this, let me know.
thanks,
richThis message will be issued if files necessary for installation are not found once the self-extracting executable extracts its content. If you successfully used same distribution file to install on another machine, it is very likely that the distribution file got corrupted while being moved from one system to another.
If you use ftp to transfer files between systems, make sure that you transfer file in binary mode.
If you don't have the original distribution file anymore, you might need to download the distribution again. -
WF error: There are no workflows that have already worked with this object
Hello all,
I am getting the error "There are no workflows that have already worked with this object" when I go to IQS23--> enter notification number --> workflow overview. I tried to find information related to this error message but could not find anything. If anyone happen to know anything about this error, please let me know.
Thanks.
MithunHello,
As the error message says, it can't find any workflows that have dealt with the instance of the object you're inquiring about.
If you know this isn't true, or if you don't know what object this concerns, the you could try debug to see which object is being searched for.
regards
Rick Bakker
Hanabi Technology -
CCMS Error - There are system problems on the remote host (system failure)
Hi,
I have installed the SAPCCMSR agent in the AccAD(Accelerated Application Delivery) server. However, when I execute OS07 and try to view the CPU usage, I encountered this error:
There are system problems on the remote host (system failure)
Message no. S1308
Any idea what does the error mean?
Thanks.
KYHi,
Thanks for replying. The problem has been resolved after upgrading the sapccmsr.
Thanks.
Regards,
KY -
Wheni am tried to settle order i got error There are no accrued amounts; s
Wheni am tried to settle order i got error There are no accrued amounts; settlement is not possible.
Hi Guru,
Details of production order
Target quantity =1,063,893 Delivered quantity =1,063,893 confirmed quantity = 1,074,945 EA Basic start =07.04.2009 Basic finish =01.11.2010 TECO PCNF DLV PRC GMPS MANC RESA SETC*
When i am trying to close order system gives Error messsage
000 Unprocessed future change recs for order SS50008TT/1A prevent del. fl
000 Order SS50008TT/1A is partially confirmed
Unprocessed future change recs for order SS50008TT/1A prevent del.
flag/completion
Message no. CO688
Diagnosis
There are still future change records or error records to be process
from the confirmation for the confirmation processes in order
SS50008TT/1A. Possible confirmation processes are:
o Automatic goods receipt
o Backflushing
o Calculation of actual costs
o Data transfer to HR
System Response
You are not meant to set the deletion flag/'completed' status
with future change records that have not been processed.
edure
You should process the open future change records using
o Predefined confimration process or
o The CORUPROC program, by dispatching it in Customizing in
background job (dispatch background jobs: dispatching proc
Check if incorrect goods movements or incorrect actual cost ca
exist for the order, and reprocess these if necessary:
o Reprocessing incorrect goods movements
o Reprocessing incorrect actual cost calculations -
VC Error: There are no BI systems defined in portal/ no authorization
Hi,
when trying to launch the BI integration wizard on an iview in Visual Composer in the ESA Discovery system I get the follwing error message:
"WARNING 2005: There are no BI systems defined in portal. In order to use BI integration wizard, you must first define at least one BI system based on the BI XMLA, BI ODBO, BI JDBC, or BI SAP Query Connector."
When I click on the "Find data" button in VC I am able to see the names of BI systems in the System drop down box and can search queries and execute them. So the BI must be connected.
I did not change the original configuration of portal or VC.
When trying to launch the MDX editor or SQL editor I get the error message that I am not authorized to do this, but I am logged on as user admin or user j2ee_admin.
Can somebody help me please
Best Regards
Maximilian LohrerQuestion has been sent twice, I close it.
-
Error: there are non exicisable item with cenvat tax code
I am getting an error message there are non exicisable item with cenvat tax code while trying to add po for pick and pack from sales order. I request all of you to help me with it.
I have already checked if the item and ware house is exicisable in the check box of the master data.
Best regards,
Sandesh.SreyamshThanks mahendra and rahul,
Unfortunately my issue is not solved yet, the tax is not manually created it was created by sap during new company creation. I checked by adding other tax type in sales order but every time when I try to create sales bom it gives the above error.
@ Rahul the tax is under cenvat type and the Items has been added under exercise transaction. here is what im trying to do
I created a sales order for 4 of my items.
Then i try to create po for two of my as pick and pack items by checking Purchase orders indicator under logistics tab of sales order.
At this point i am getting the above said error.
All the items i am trying to add is exisable and tax is also of cenvat type.
Please help me out of this as im stuch very badly in this issue.
Regards,
Sandesh.Sreyamsh -
PCO 2.1 Error : there are multiple root elements Line 6, position 2
HI all,
I am getting an error while adding Destination for Notification.
On the Destination Tab, I am able to create MII System as Destination. And expanding the newly created Destination, i can see a child node 'Destination'. While clicking on this child node, i am getting an error as "there are multiple root elements Line 6, position 2"
Can anybody please help.
Regards
MuzammilHi,
While configuring MII Server details, instead of IP address of MII server, we gave domain name and it started working.
Regards
Muzammil -
Depreciation error :There are no areas to post to in company code SN00
Hi,
When I am running depreciation (AFAB) for a main asset for a particular period, I am getting an error as "There are no areas to post to in company code SN00".
On further checking, the solution seems given is as follows" Using the Customizing functions, check whether the areas to be posted have been given a posting cycle in the company code specified."
Could not understand what does that mean.
Any inputs will be highly appreciated.
Thanks in Advance,
DusmantaHi,
You have to define how depreciation area post to general ledger.
For this in SPRO, in Asset Accounting go to 'Integration with the General Ledger' and in to
'How Depreciation Area post to General Ledger'.
For your dereciation area, check whether 'Area Posts in Realtime' is selected.
regards,
Priya Rajesh. -
Error: There are gaps in assignment of required role ZVLPP Vendor - Landlor
Hello everyone,
I did create a new BP role with vendor integration. I have done all the settings including the syncronization settings between the vendor and BP. Now when i want to edin an old contract i get error message:
There are gaps in assignment of required role ZVLPP Vendor - Landlord Companies
Message no. REBPBP011
Diagnosis
Either a business partner has not been assigned in role ZVLPP Vendor - Landlord Companies for the current object/contract or
A business partner is not assigned in this role at all times in which the object is valid (period 01.11.2008 - 31.10.2009).
However, the Customizing settings specify that role ZVLPP Vendor - Landlord Companies is mandatory for the current object/contract.
System Response
Depending on the object, you may be able to save the object despite the fact that there is no business partner. However you will not be able to activate the contract if you have not assigned a business partner.
Procedure
Assign a business partner in role ZVLPP Vendor - Landlord Companies for the entire period 01.11.2008 - 31.10.2009.
My problem is in the step where i make assignment of applications/objects to my business roles, I havent set any of the two roles as madatory for a RE contract.
I ve gone through all the steps for BP in Customizing and searched through all OSS notes and forums but didnt find anything on that problem.
Does anyone have an idea what the problem might be?
Any input would be appreciated
Thanks
SeverinaHi,
The message is not an error message. but for me it is just a warning message. Inspite of the warning, you can still save the contract.
However, you cannot activate the contract because, Customer / Vendor Business Partner are not attached to the Real estate contract. By default, you must assign a Business partner with Customer role / Vendor role to a contract. This is to ensure FI postings to Customers / Vendors.
So, choose a Business partner with vendor role and save the contract and activate it.
Cheers !!!
Siva -
I have all my photos organized in i-photo as both photos and events. When I opened in the past the images in each event or album appeared as icons on the sreen. Now when I open I only get a dotted line rectangle and only if I click I see the picture, which is really problematic when trying to see or select nay image.
I don't know if mistakenly I did something with the settings although I couls not find anything in preferences or any of the menus that could relate to this.Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto thumbnails - this may take several tries
Also what version of iPhoto? What recently changed?
LN -
The error message pops up for all WAV files. All the same files play fine with other software. What is wrong with the HP software?
gambl0r wrote:
Winston, you CAN sync without transferring the files to the Apple TV HDD.
That's not correct, although I now understand you.
Select Custom sync and choose not to transfer files.
As I say I realise what you are saying, but it is your library database file that is synced, your music is streamed.
It has worked in the past for me and it still works now, I can see all the albums on the Apple TV in 'My Music' only when I go to play a file: silence. Both on the television and on the stereo.
Have you by any chance turned the volume down on the tv.
And yes, there is a reason to disable sound output via HDMI, because there is no use to have two audio streams outputting at the same time.
Sorry I don't follow your reasoning here. We don't use the DVD player in the car, I haven't considered disabling it though. -
Metastat error "there are no exsiting databases
Good day
We have a numerous T2000, T5220 and V240/V245 in our fleet. Most have mirrored drives supporting the Solais 10. On one of our v245 we appear to have lost one of our drives. The metastat command returns the following:
bash-3.00# metastat
d6: Mirror
Submirror 0: d16
State: Needs maintenance
Submirror 1: d26
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 56894016 blocks (27 GB)
d16: Submirror of d6
State: Needs maintenance
Invoke: metareplace d6 c1t0d0s6 <new device>
Size: 56894016 blocks (27 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t0d0s6 0 No Maintenance Yes
d26: Submirror of d6
State: Okay
Size: 56894016 blocks (27 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t1d0s6 0 No Okay Yes
d5: Mirror
Submirror 0: d15
State: Needs maintenance
Submirror 1: d25
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 20484288 blocks (9.8 GB)
d15: Submirror of d5
State: Needs maintenance
Invoke: metareplace d5 c1t0d0s5 <new device>
Size: 20484288 blocks (9.8 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t0d0s5 0 No Maintenance Yes
d25: Submirror of d5
State: Okay
Size: 20484288 blocks (9.8 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t1d0s5 0 No Okay Yes
d4: Mirror
Submirror 0: d14
State: Needs maintenance
Submirror 1: d24
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 20484288 blocks (9.8 GB)
d14: Submirror of d4
State: Needs maintenance
Invoke: metareplace d4 c1t0d0s4 <new device>
Size: 20484288 blocks (9.8 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t0d0s4 0 No Maintenance Yes
d24: Submirror of d4
State: Okay
Size: 20484288 blocks (9.8 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t1d0s4 0 No Okay Yes
d3: Mirror
Submirror 0: d13
State: Needs maintenance
Submirror 1: d23
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 20484288 blocks (9.8 GB)
d13: Submirror of d3
State: Needs maintenance
Invoke: metareplace d3 c1t0d0s3 <new device>
Size: 20484288 blocks (9.8 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t0d0s3 0 No Maintenance Yes
d23: Submirror of d3
State: Okay
Size: 20484288 blocks (9.8 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t1d0s3 0 No Okay Yes
d1: Mirror
Submirror 0: d11
State: Needs maintenance
Submirror 1: d21
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 4202688 blocks (2.0 GB)
d11: Submirror of d1
State: Needs maintenance
Invoke: metareplace d1 c1t0d0s1 <new device>
Size: 4202688 blocks (2.0 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t0d0s1 0 No Maintenance Yes
d21: Submirror of d1
State: Okay
Size: 4202688 blocks (2.0 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t1d0s1 0 No Okay Yes
d0: Mirror
Submirror 0: d10
State: Needs maintenance
Submirror 1: d20
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 20484288 blocks (9.8 GB)
d10: Submirror of d0
State: Needs maintenance
Invoke: metareplace d0 c1t0d0s0 <new device>
Size: 20484288 blocks (9.8 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t0d0s0 0 No Maintenance Yes
d20: Submirror of d0
State: Okay
Size: 20484288 blocks (9.8 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t1d0s0 0 No Okay Yes
Device Relocation Information:
Device Reloc Device ID
c1t1d0 Yes id1,sd@n500000e01579f140
c1t0d0 Yes id1,sd@n500000e0157a12f0
But when I run radictl on the same unit, the respnse is No RAID volumes found
on the T2000, raidctl will show the devices, but metastat says no existing databases.
why?In further research, the answer is you either setup raid 1 disk mirroring using raidctl (which is hardware driven), or meta (which is software driven)
on our v245 the RAID was setup using the software.
iostat -En results are below:
bash-3.00# iostat -En
c1t0d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: FUJITSU Product: MAY2073RCSUN72G Revision: 0501 Serial No: 0717S0A4JK
Size: 73.40GB <73400057856 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
c0t0d0 Soft Errors: 1 Hard Errors: 0 Transport Errors: 0
Vendor: MATSHITA Product: DVD-RAM UJ-845S Revision: D100 Serial No:
Size: 0.00GB <0 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 1 Predictive Failure Analysis: 0
c1t1d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: FUJITSU Product: MAY2073RCSUN72G Revision: 0501 Serial No: 0717S0A4CU
Size: 73.40GB <73400057856 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
Maybe you are looking for
-
How do I use my ipod after disabled message-connect to itunes.
My son set up a passcode on his ipod touch and forgot it. He tried several different passcodes and got locked out. His ipod now has the message "ipod disabled, connect to itunes". We followed the steps for recovery on apple support, but the only th
-
Receiving and error while uninstalling RBS on Sharepoint 2010
I am having an issue uninstalling RBS from our content databases. The steps I've taken are as follows: 1. Migrate the content out and disable via powershell $cdb = Get-SPContentDatabase <<database name>> $rbss = $cdb.RemoteBlobStorageSettings $rbss.S
-
How often is email checked?
I have an E6 and I periodically send test emails. I noticed that sometimes I receive my test emails instantly. Other times I receive them after a good while. On past phones I was able to set how often to check email, but on my E6 for some reason I
-
Cisco 851W - Internal WLAN and Guest WLAN
I have a Cisco 851W Router, which has an IPSEC Tunnel back to my corporate office. I want to configure 2 WLANS, one for my internal network (vlan 1) which will have access to my corporate network, and one for guests which will just be for outbound in
-
Table Maintenance Generator via program using ALV OO concept
Hi All, I have a requriement to update the table using OO ALV i.e table maintenance generator program. My Z table have three fields say.. NEW status, old status and flag. I have to dispaly the records of the Z table in Matrix format. for example the