Empty Slideshow error

When I try to burn my DVD, I get an error message telling me I have an empty slideshow in my project. Make sure every slideshow contains at least one image, or delete any empty slideshow. Fine, but when I switch to Map View, there are no warnings to be found. Any suggestions?

You're welcome. Feel free to keep us posted on the new project you attempt.
Hope it works better than the first.
Good luck.

Similar Messages

'empty slideshow' error message

Hi all,
Sorry to repeat this question, but I'm desperate - the movie I've made is due to be screened in two days and I can't burn it.
When I click the Burn button, I get this message:
The following warnings and errors were found during the validation of the current project:
- There is an empty slideshow in your project. Make sure every slideshow contains at least one image or delete any empty slideshow before burning this project.
There is no slideshow in the project. The Map view shows no slideshow and there are no warning signs in the Map view.
Can anyone suggest a fix?
Thanks,
Andrew

Hi there,
Thanks for following up on my problem - I'm always grateful for advice even if the immediate problem has been dealt with.
Actually, I never got a 'blank slideshow' appearing in my map, so there was nothing to fix or delete. I just kept getting the error message saying that there was an empty slideshow. Weird! At one point I created a slideshow just so I could delete it, but the message kept appearing.
Thanks for trying,
Andrew

Empty Slideshow Error (there are no empty slideshows)

Hello All,
I am using iDVD 7.0.3 and I keep getting the following error message:
* There is an empty slideshow in your project. Make sure every slideshow contains at least one image, or delete any empty slideshow before burning this project.
when I attempt to burn my disc. I have checked and rechecked and checked again and all of my slideshows have images in them. Does anyone have any suggestions? Thanks!
_Kyle

I've got the same problem as well. From what I can guess, it looks like the iTunes application on the secondary Mac is streaming the photos, but stalls out in order to build a cache of thumbnails or appropriately sized images to send over to the AppleTV.
The AppleTV isn't expecting the connection to the Mac to take as long as it does to build the streaming image library and then pauses/timeouts while the library is being built.
I'm not sure if the library gets cached so the AppleTV doesn't pause during reconnections and reboots but if that is the issue, it would be nice if Apple updated iTunes to be able to keep the AppleTV streaming library cache current so the pause/timeout doesn't occur when everyone is gathered around the television.

How to recover when Delta Queues have been emptied by error ?

Hi All,
Here is our problem : the ECC Delta Qs have been emptied by error some days ago, and for the moment we have frozen every BW updates from ECC, but the Delta Queues have been being filled in ECC since that.
We have so smart ideas so far...
Thx 2 all in advance

Hello ThoLei ,
In case your normal delta is running file in BW and the only thing you are concerned about is the data missed during the day when the queue got deleted, then yes you can go ahead with Repair Full option. If you refresh the missing data and no need to worry about delta.
Regards,
Pratap Sone

Unable to empty trash error code 8003 appears ?

Unable to empty trash error code 8003 appears ?

I had the same problem - tried all sorts but nothing worked. Eventually I used a tool called Trash It! which did the job (though apparently it is only to be used as a last resort).
http://www.macupdate.com/app/mac/8214/trash-it! Emptied the Trash and no problems since.
Cheers
J

Unable to empty trash error code 8003

Unable to empty trash error code 8003
MacBook Pro
OSX 10.6.7
4GB RAM

I had the same problem - tried all sorts but nothing worked. Eventually I used a tool called Trash It! which did the job (though apparently it is only to be used as a last resort).
http://www.macupdate.com/app/mac/8214/trash-it! Emptied the Trash and no problems since.
Cheers
J

With Firefox running, Office 2007 generates a "Cannot Empty Clipboard" error message when pasting information between Excel cells -- the behavior goes away when I close Firefox. Is there a way to prevent this?

I am running Windows XP, Office 2007, and Firefox 3.6.13.
Whenever I have Firefox running in the background and I attempt to paste information between Excel cells a "Cannot Empty Clipboard" error is generated. I have attempted numerous other fixes for this: Excel and Office settings. But nothing seems to help. When I close Firefox, the errors are no longer generated.

The Skype add-in was the culprit in my case. Disabling it fixed the problem. As soon as I enable it, the problem comes back.

CreateJS "Empty Symbol" Error

I've installed the CreateJS toolkit in Flash CS6, and I'm getting several "empty symbol" errors when try to publish the Flash file to HTML5 using the toolkit. Most of the symbols export fine -- it's just a handful that don't -- and I can't figure out why. (The symbols that work and the symbols that don't work are essentially essentially identical, and all of them were originally created as graphic symbols in Illustrator and then imported into the Flash library). The file exports fine as a SWF, but I need to convert it to HTML5 to include in an iPad app. Any tips you can offer would be greatly appreciated - thank you!

Hi Gen,
Unfortunately, the error came from a client who was submitting a form via Mac OS. He stated that when he attempted to submit he received a symbol error.
On another note, I did experience issues with periods (.) within another form such as 2009.01 and 2011.25. When I downloaded the files corresponding to the numbers, it wouldn’t allow me to save it with the period (used an underscore instead).
Warmest regards,
Delia
Delia Boyd
Program Manager, Standards Development
Executive Office
AOAC INTERNATIONAL
481 N. Frederick Avenue, Suite 500
Gaithersburg, MD 20877-2417
301-924-7077 x126
301-924-7089 - Fax
[email protected]<mailto:[email protected]>
www.aoac.org<http://www.aoac.org/>
cid:[email protected]
127th AOAC Annual Meeting & Exposition
Palmer House Hilton
Chicago, Illinois
August 25-28, 2013
For more information visit our website
at: http://www.aoac.org/meetings1/127th_annual_mtg/main_2.htm
þ Please consider the environment before printing this email.
...you will see it when you believe it!

System sluggish / can't empty trash / error keeps logging every few minutes

I am having a peculiar problem. I'm on 10.4.10 with an iMac 2.33 GHz Intel Core 2 Duo with 3 GB 667 Mhz DDR2 SDRAM.
This afternoon my computer starting acting very slugging, and giving me the spinning colored ball for minutes at a time. It seems to be trying to do something repeatedly. My disk permissions are clean, I've rebooted a few times. Then I noticed something appeared in the trash -- I didn't put it there. It's a single folder called Yahoo.AdiumEmoticon(Old). I use Adium with a Yahoo & AIM account to communicate with my coworkers every daily (I work from home). I shut down Adium and tried emptying the trash. It refuses repeatedly, even after reboots, saying that this folder is "in use." Sometimes it would say "An item called 'My Project Folder' is already in use. Do you want to replace it?" (Or something close to this.) This error, if I don't answer, stays on the screen for about 10 seconds, and then is replaced with "The operation cannot be completed because the item 'Yahoo.AdiumEmoticonOld' is in use."
Okay then.
So I ran Console and checked system.log. It's showing that for the last couple of hours now, every minutes or so it logs this:
Oct 15 22:33:05 Haviland kernel[0]: disk0s2: 0xe0030005 (UNDEFINED).
It's the same address every time.
Before all this started, I was in Parallels using Windows XP, where I do some of my business. In what might have been a moment of bad judgement, I decided to install Access 2007 there. It installed OK at first, but when I rebooted Parallels, I could no longer launch Access. It would crash. I then tried removing Access, and that would crash too, leaving it there. I couldn't re-install it either. So I quit Parallels, and ever since then I've been having this problem. Parallels is not loaded.
I'm going to keep poking at this but any help is appreciated. My Disk Warrior is too old to help, so I'm going to fiddle with Tiger Cache Cleaner and see what happens -- but this is over my head, so I'm afraid of making things worse.

So Tiger Cache Cleaner didn't do anything. Wouldn't force-delete the trash. Something is seriously wrong here. I downloaded TechTool Deluxe and burned it onto a DVD-R, then booted it off that. I ran a full diagnostic (minus surface scan) and it said that my volume structure needed to be repaired. So I attempted to repair, and it stopped after about a minute and said, "The Volume Structure Rebuild could not be completed." No explanation as to why. Gee, thanks.
Now what?

The ForEach Loop Enumerator is Empty - SSIS Error when executing through CMD via VBA

I am currently working on a SSIS package that is to be triggered through CMD via VBA (Access). All that the package does is read a bunch of files from a folder and upload them into a table in SQL Server. The tricky part comes is that this folder location from
which the package is to read the files is dynamic.
I figured out a way to make it dynamic, by using variables
I have used the following variables:
"Directory" against DIRECTORY in COLLECTION>>EXPRESSIONS in the ForEachfile Enumerator,
"FilePath" (With Index 0) in the Variable Mappings
PROBLEM : As the final link in the chain, I have used following to be triggered from VBA
dtexec \f "C:\Desktop\SSISAppend.dtsx" /Set "\Package.Variables[User::Directory].Property[Value];C:\Desktop\AppendFiles"
When I try to execute the package using the above command, it gives out the error
Code : 0x8001C004
Description: The For Each File Enumerator is empty. The For Each File enumerator did not find any files that meatched the file pattern, or the specified directory was empty.
But, when I run the package from MS VisualStudio 2008, the package runs fine, takes the location of the file assigned to the variable "Directory".
All help is appreciated

Where are you executing the package from? You're giving an aboslute path so this will work only if package as well as the folder is in the same machine from which you execute the above code. Otherwise you need to use UNC path.
Another thing to check is what login is executing the command and you need to ensure it does have access to the directoty path as well as to the path where package resides.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Call function in update task empty variables error

Hello,
I'm experiencing a weird error while using the addition "In update task".
My Scenario is the following:
Use the bapi_goodsmvt_create -> if there are no errors, fill some values and call my function and then commit everything.
The problem is, when the function runs in update task, all import parameters are empty!
Also, this only happens in the following code structure
CALL METHOD run_migo( IMPORTING bapireturn = t_bapireturn).
IF t_bapireturn IS INITIAL.
CALL METHOD save_custom_tables. "this runs my function 'IN UPDATE TASK'
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
      wait = 'X'.
ENDIF.
if I commit inside the method SAVE_CUSTOM_TABLES, the data is passed normally to the function, if I commit like the code above, everything is empty.

Here's the code:
METHOD save_partial.
DATA: t_wegritm    LIKE gt_wegritm,
        t_tegrp_parc TYPE TABLE OF ztegrp_parc,
        w_tegrp_parc TYPE ztegrp_parc,
        w_tegrk_parc TYPE ztegrk_parc.
FIELD-SYMBOLS <w_wegritm> LIKE LINE OF t_wegritm.
t_wegritm = gt_wegritm.
DELETE t_wegritm WHERE mengee IS INITIAL.
CHECK NOT t_wegritm IS INITIAL.
*-->save xml iten
LOOP AT t_wegritm ASSIGNING <w_wegritm>.
    MOVE-CORRESPONDING <w_wegritm> TO w_tegrp_parc.
    w_tegrp_parc-id = gw_tegrk-id.
    w_tegrp_parc-gr_docto = <w_wegritm>-gr_docto.
    w_tegrp_parc-gr_mjahr = <w_wegritm>-gr_mjahr.
    w_tegrp_parc-gr_zeile = <w_wegritm>-gr_zeile.
    APPEND w_tegrp_parc TO t_tegrp_parc.
ENDLOOP.
MOVE-CORRESPONDING gw_tegrk TO w_tegrk_parc.
CALL FUNCTION 'Z_SAVE_PARTIAL'
    IN UPDATE TASK
    EXPORTING
      iw_tegrk_parc = w_tegrk_parc
    TABLES
      it_tegrp_parc = t_tegrp_parc.
ENDMETHOD.
I tried to re-create this scenario with a local class, but the code that I originally sent worked(the commit work outside of the routine).

Can't empty Trash error -50

Hi,
Trust this is the right forum.
If you can assist,I would appreciate it.I’m running Mountain Lion on a Mac Pro
1. I get an error -50 trying to empty the trash.
2. The trash is on an external drive (Mac OS Extended (Journaled)
3. The disk utility reports the disk as fine, Though it doesn’t give me the option to “Verify permissions”
4. I also get a -36 error in trying to copy the data on the disk to another drive.
5 I note that while the get info shows 300 Gig free, which means usage is around 200G, the directories show zero bytes and appear empty, ie files names not visible
6. All of this happened after a download failed and I deleted the directory which is in the trash as zero bytes and am unable to get it out of the trash
7. The disk is effectively locked as I can’t create, delete or move any item, under Get Info, I have read and write permissions
8. When trying to eject the disk, I get "the disk ,,,, wasn't ejected because one or more programs may be using it
Note: Have tried using ONYX, Terminal - sudo rm -rf ~/.Trash/
To no avail.
Cheers
Terry

Hi, I just tried something which I should have tried, but overlooked it. I deleted the application I was using at the time the download failed.
I then tried to empty the trash and presto, it emptied!!!
Cheers

"empty file" error with CS5, linux server and mavericks

hello to the community,
i'm the owner of a small online marketing agency.
we have been using different macs here since 10.6. until mavericks with adobe CS 5 and a linux server for years.
today i got a new MBP retina with mavericks and since now i have the following problem:
- when i try to open a photoshop file on the server i get a "file is empty" error, when i open an illustrator file on the server illustrator crashes und when i open a pdf on the server with acrobat pro there comes a message that the file is corrupt. with acrobat reader i can open it.
- i can open the exact files with all apps when they are on a local storage not an the server
- i can open all files on the server with another mac with os x 10.6.
so there must be a problem with the combination cs5-files, server and os 10.9. it's weird because with my old MBP i with also using mavericks and there was no problem.
can anyone help me? it's really a problem!

i found a workaround that seems to work!
instead of connecting to the server with "smb" i connect with "cifs". so i force mavericks to connect using the old smb 1 instead of the buggy smb 2.

Clear Data package - "The data file is empty." Error

Hi,
When I run the Clear package in Data Manager, I get the error "The data file is empty". We are running BPC 7.5 SP3. There are no calculated members selected. Any suggestions?
Thanks.
Tom

Hi Tom,
If i'm not mistaken when we run the clear data package, BPC inserts -ve values for the combination of dimensions selected.
For ex if you have selected time as 2010.DEC it would reverse out all these values by inserting negative values which would then total up to zero.
So i still think it could be a problem with the Transformation file.
P.S. Maybe you can try using the Clear from Fact table package.
Santosh

"empty file" error in Mail from PDF attachments created on a PC

Hi all,
We have an odd situation where a particular PC user seems to be unable to send MacMail-compatible .pdf files.
When she sends the files, Mail gives the following error upon trying to open them:
"The file xxxxx could not be opened because it is empty."
This only happens in Mac Mail.
The files open fine in both our Zimbra webmail system, and Thunderbird.
Additionally, when I hover my cursor over the attachment icon in Mac Mail, I get the following popup:
"status: not yet downloaded"
I've searched in vain for info on both of these messages.
Any ideas?
Thanks!
OS: 10.6.7
Model: 3Ghz Core i3 iMac

Hi Paul,
Does this Mac have Sophos installed? If so, see the topic at the link below:
http://discussions.apple.com/message.jspa?messageID=13387558#13387558
Note the need to also remove the com.apple.mail.plist, and instructions for doing that.
Ernie

Empty Slideshow error

Similar Messages

Maybe you are looking for