Empty SXI_MONITOR after SP14 to SP16 (Messages passing without problem)

Hi,
after patching from SP14 to SP16 i do not see Messages in SXI_MONITOR nether in RWB Monitor. The Messages passing the XI, i tried an sync WebService to RFC Scenario and it's working. I just don't have Messages in monitor. The Monitoring settings in SXMB_ADM are looking good. Any idea???
Regards
J.

Hi,
To be able to see the successfully processed sync messages you have to set the sync_logging parameter to 1 in sxmb_adm.
Go to sxmb_adm>Integration Engine configuration>specific config>add new entry in runtime category> set the logging_sync parameter to '1'
Once these setting are done you should be able to see the sync messages in sxmb_moni.
Regards,
Chandra

Similar Messages

Access denied in Windows 2012 Server Manager after a period of time working without problems

Hello,
I had 2 servers with windows 2012 installed in a domain (dc is in a 3rd server) and both added to server manager of each other. Both servers had Failover cluster installed and configured roles. After startup in both servers i can see the other and manage
it without problems (in server manager and failover cluster manages) but after a period of 30-40 minutes in both servers I see "Online - Data Retrieval failures Ocurred" for the partner server and "Online - Access Denied" for local server.
When I access de Failure Cluster Manager I had errors accessing resources and roles and can´t failover the cluster.
I removed the failover cluster thinking that could be the original problem, remove servers from domain, change names and add again to the domain without install failover cluster.
Now, the servers have not the failover cluster feature and the problem persists. 30-40 minutes after boot the server manager show messages of inaccesible partner with same messages. I tried to execute powershell commands to add a new ip to the NIC and I
receive a Access Denied Message and show Access Denied message in other events in log.
I´m using Domain Administrator Account and tried different solutions but not solved. I saw that this message can occur in a variety of different scenarios, but i don´t know why works during a period of time before failing. It´s frustrating
Regards
EDITED: in detail of Online - Data retrieval failures i see that: Configuration refresh failed with the following error: The metadata failed to be retrieved from the server, due to the following error: The WS-Management service cannot process the request.
The WMI provider returned an 'access denied' error.

Hi PabloVDL,
It seems is this two server has register the incorrect DNS, please try to add this server manage NIC IP to your manager hosts file or if possible trmpory disable the useless NIC DNS register. This issue also some times caused by when you installed
the HP insignth management, if in your environment you have this tools please temporarily uninstall it.
More information:
Windows Server 2012 - Server Manager Troubleshooting Guide, Part III: Common
Events and Errors in Server Manager
http://social.technet.microsoft.com/wiki/contents/articles/13445.windows-server-2012-server-manager-troubleshooting-guide-part-iii-common-events-and-errors-in-server-manager.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Encore won't start after a month of working almost without problems

Upon startup I get this error message -"The program can't start because MSVCR71.dll is missing from your computer. Try reinstalling the program to fix this problem." DO I ACTUALLY HAVE TO REINSTALL CS5 IN ORDER TO USE ENCORE?

The first thing that I would do would be a Repair Install. Most Adobe programs, and earlier versions of En, allow for this, and it saves a great deal of time. I assume that CS5 has not done away with this.
In many Adobe programs, one would just go to Help>Repair Install, having their media handy. If this does not appear, then I would inset the media, and it should survey the system, finding all installed programs from that disc. One should then choose the program, Encore in this case, and again it will survey the system, and offer either Uninstall, or Repair Install, which would be the choice here.
I had to do a Repair Install for the entire CS2 Production Studio (all programs), and it took less than 45 mins. to complete, and most of that was swapping discs into the DVD drive.
Good luck,
Hunt

Itunes 11 is randomly downloading empty tracks in playlists, can stream same tracks without problems.

i installed itunes 11 on windows 8 pro x64 with itunes match (with loads of tracks in it)
i logged in and i can stream music just fine and i really like the new ui, but if i choose to download a playlist sometimes it works well and i get the tracks, but sometimes i end up with files of the right size on my hdd, but they are not working, neither in itunes nor in another media player.
if i delete the tracks in itunes and stream them they work again.
the tracks i had problems with are by no means obscure, radiohead among them for example.
i suppose this is a bug?

Just for everyone's benefit, I figured out one problem: If you're really keen to have the album art shown in the whole library view, create a smart playlist wiht the following parameters:
Playlist is Music, No limit to set, live updating.
This will take all of the music in your library and put it in this playlist, once you've done this open the playlist, change the view (top right hand corner of the screen) to artist view, and a view similar to the old one will be shown.
Hope this helps!

Schema of a new Object Type: message pass the BIU without validation

Hi,
i've defined a new Object Type for send messages to Web Service. I've created the schema files and i've uploaded there in repository with the "Import" function of GUI. After, i've defined the XML file for the "Execute" function of the B1i GUI.
After the load of files, in the repository the files are in correct position.
In my BIU the definition of sender and receiver system type is correct, and also the definition of SenderMainObjectTypeID and ReceiverObjectTypeID. The message from B1 pass through the IPO chain without problems and the message is received by teh Web Service.
If modify the file XSL into the BIU, a message with less elements than a schema pass without problem.
If delete the schema from repository, the message pass without validation.
I would know because the schema is bypassed...
Thans

Ok,
solved with introduction of validation point in a customized IPO using a branch / unbranch atoms.
Bye.

"Portable" way to do message passing between threads?

(I posted this on the Apple Developer Forums already, but since that forum is only accessible to registered and paid iPhone developers, I thought it would be nice to put it here as well so as to get some more potential eyeballs on it. I apologize if this kind of "cross-posting" is not kosher/is frowned upon around here.)
Hey everybody,
"Long-time listener, first-time caller," heh.
I've been working for the past 2-3 months on my very first iPhone app. Actually, what I've been working on is a framework that I plan to use in an iPhone app of my own but which I am also trying to write for the "lowest-common-denominator" so that I (and others) can use it in other apps written for both Mac and iPhone.
Not only is this my first time writing an iPhone app, it is my first time writing for any Apple platform. In fact, it is my first time using Objective-C, period. I cannot stress this enough: I am a "n00b." So go easy on me. I also have not worked with threading before this, either, on any platform, so the learning curve for me here is rather significant, I'm afraid. I am NOT afraid of either taking the time to learn something properly OR of rolling up my shirtsleeves and working. However, on account of my experiences so far, I am finding myself (not to flame or anything!) quickly becoming frustrated by and disillusioned with not so much Objective-C itself, but the Foundation frameworks.
So with that said, read on, if you dare...
The basic idea behind my project is that the framework I am writing will present an API to developers which will allow them to write client apps that interact with a particular network appliance or network-aware embedded system. I already have my basic set of classes up and functioning, and the framework works to my satisfaction both on MacOS and iPhoneOS. The platforms I am targeting are MacOS X Tiger 10.4 and later, and iPhoneOS, and up until this point, I've managed to keep a codebase that works on all of the above.
What I wanted to do next was add some multithreaded goodness to the mix. (Woe is me.) I have asynchronous network socket I/O working within the main thread, and it, in fact, works a treat. In my test app on the phone, I've managed to keep the UI nice and responsive by using the main thread's runloop efficiently. But even though TCP async I/O works fine within the main thread, I want to be able to split out and offload the processing of any data received by the app from the appliance to its own thread. (It is possible, and even desirable, for an application using this framework to be connected to multiple appliances simultaneously.)
My idea, in order to try to keep things as simple and as clean as possible, was to implement a wrapper class that presented my other main class as an "actor." So, rather than instantiating my main class, one would create an instance of the wrapper class which would in turn control a single instance of my main class and spawn its own thread that the network connection and all data processing for that particular connection would run within.
(I hope I'm making sense so far...)
Out of the gate, writing a subclass of NSThread sounds like the logical design choice for an "actor-type" thread, but because I was trying to maintain Tiger compatibility, I stuck with +detachNewThreadSelector:etc.
Once I decided to pursue the actor model, though, the main problem presented itself: how to best pass messages between the main thread and all of the "actor" threads that might be spawned?
I stumbled upon -performSelector:onThread:withObject:, and knew instantly that this was exactly what I was looking for. Unfortunately, it doesn't exist on Tiger; only its much more limited little brother -performSelectorOnMainThread:withObject: does. So I kept looking.
All of the pre-Leopard documentation, tutorials, and sample code that I read indicated that to pass messages between threads, I needed to basically pretend that the threads were separate processes and use the expensive Distributed Objects mechanism to get messages back and forth. Unfortunately, even if that WAS a desirable option, iPhoneOS does not have any support for DO! Grrr...
Finally, I thought I found the answer when I ran into a third-party solution: the InterThreadMessaging library from Toby Paterson (available @ http://homepage.mac.com/djv/FileSharing3.html). In this library, the author basically implemented his own version of -performSelector:onThread:withObject: called -performSelector:withObject:inThread:. Sounds close enough, right? And actually, it is pretty darn close. It's made to do exactly what it sounds like, and it does it in a platform-neutral way that works on pre-Leopard systems as well as iPhoneOS, using Mach ports instead of DO.
(...wellll, ALMOST. I discovered after I built a small test app around it that it actually isn't "iPhone-clean." The author used an NSMapTable struct and the NSMap*() functions, which don't exist in iPhoneOS, and he also implemented the handlePortMessage delegate method, but although iPhoneOS has NSPort, it DOESN'T have NSPortMessage. GAAARGH. So I took the time to replace the NSMapTable stuff with NSValue-wrapped objects inside of an NSMutableDictionary, and replaced the handlePortMessage method implementation with a handleMachMessage method, which took some doing because I had to figure out the structure of a Mach message, NO thanks to ANY of the available documentation...)
Once I started using it, though, I quickly discovered that this implementation wasn't up to snuff. My "actor" class and my main thread will be passing a ton of messages to each other constantly whenever there is network activity, and with InterThreadMessaging, I found that whenever activity started to ramp up, it would collapse on itself. This mostly took the form of deadlocks. I found a note that someone else wrote after experiencing something similar with this library (quoted from DustinVoss @ http://www.cocoadev.com/index.pl?InterThreadMessaging):
"It is possible to deadlock this library if thread A posts a notification on thread B, and the notification on B causes a selector or notification to be posted on thread A. Possibly under other circumstances. I have resolved this in my own code by creating an inter-thread communication lock. When a thread wants to communicate, it tries the lock to see if another thread is already using the InterThreadMessaging library, and if it can't get the lock, it posts a message to its own run-loop to try again later. This is not a good solution, but it seems to work well enough."
So I tried implementing what he described using a global NSLock, and it did help with some of the deadlocks. But not all. I believe the culprit here is the Mach ports system itself (from the NSPortMessage documentation for -sendBeforeDate:):
"If the message cannot be sent immediately, the sending thread blocks until either the message is sent or aDate is reached. Sent messages are queued to minimize blocking, but failure can occur if multiple messages are sent to a port faster than the portís owner can receive them, causing the queue to fill up."
InterThreadMessaging in fact calls -sendBeforeDate: and exposes the deadline option, so I tried setting a really short time-to-live on the Mach messages and then intercepted any NSPortTimeoutExceptions that were thrown; upon catching said exceptions, I would then re-queue up the message to be sent again. It worked, but Performance. Was. A. Dog. At least the message queue wouldn't be full indefinitely anymore, causing the main thread to block, but during the whole time that these messages were expiring because the queue was full and then being re-queued, either the main thread was trying to send more messages or the actor thread was trying to send more messages. And as far as I can tell, the Mach ports queue is global (at the very least, there is seemingly only one per process). The message would get through with this model...eventually.
JUST IN CASE the problem happened to be something I screwed up as I was rewriting portions of the InterThreadMessaging library so that it would compile and work on the iPhone SDK, I substituted in the original version of the library in my Mac test app to see if any of these problems became non-issues. I found that both versions of the library -- mine and the original -- performed identically. So that wasn't it.
Finally, in frustration I said, "screw it, I'm going to try it the Leopard way," and replaced all of the method calls I was making to InterThreadMessaging's -performSelector:withObject:inThread: with calls to Foundation's native -performSelector:onThread:withObject: instead, changing nothing else within my code in the process. And wouldn't you know: IT WORKED GREAT. Performance was (and is) fantastic, about on-par with the non-threaded version when only dealing with a single connection/instance of my class.
So, in the end, I was able to do nothing to salvage the InterThreadMessaging implementation of cross-thread method calling, and as far as I can tell, I'm out of (good) options. And thus my mind is filled with questions:
How is the Leopard -performSelector:onThread: method implemented? I'm guessing not using Mach ports, given that I didn't have the same blocking & deadlocking problems I had with InterThreadMessaging. Is it possible to re-implement this Leopard+ method in a similar manner as a category to NSObject under Tiger? Or is it possible, perhaps, to increase the size of the Mach ports queue so that InterThreadMessaging works at a sane level of performance? Or -- I'm getting desperate here -- is there any way that I could trick -performSelectorOnMainThread: to target a different thread instead? (I am assuming here that -performSelectorOnMainThread is implemented under-the-hood much like the new -performSelector:onThread: is implemented, but with a hard-coded NSThread pointer built-in to the code, and that the new method just exposes a more flexible interface to what is basically the same code. I'm probably wrong...) Is there another third-party library out there that I've missed that fits my requirements for being able to do message-passing between threads in an efficient and portable manner?
I refuse to believe that there is no way for me to maintain compatibility with all of the platforms I wish to support without having to resort to making preprocessor #ifdef spaghetti out of my code. And there SURELY has to be a better way of doing cross-thread message passing in Tiger without using Distributed Objects, for Pete's sake! Is this really how people did it for years-on-end since the dawn of NeXT up until the advent of Leopard? And if there really, genuinely wasn't another alternative, then what is up with the lack of DO in iPhoneOS?? Does Apple seriously intend for developers who have good, solid, tested and working code to just chuck it all and start over? What if there was some aspect of DO that previous implementations relied upon that cannot be recreated with simple -performSelector:onThread: calls? (I don't know what those aspects would be...just a hypothetical.) I mean, I can understand needing to write new stuff from scratch for your UI given how radically different the interface is between the Mac and iPhone, but having to reimplement back-end guts such as something as elemental as threads...really?!
I do laud the inclusion of the new method in Leopard as well as the new ability to subclass NSThread itself. But for those of us that need to support Tiger for one reason or another, some of these restrictions and omissions within iPhoneOS seem like rather pointless (and frustrating) roadblocks.
As I hope is obvious here, I have tried to do my homework before throwing up my hands and pestering y'all. If you have the patience to deal with me, please tell me what I am missing.
Thanks for taking the time to read,
-- Nathan

Thanks again for your patience. Comments below.
etresoft wrote:
It is pretty unusual that anyone would want to call perfomrSelector on any thread other than the main thread.
What I described in my original post was not a worker thread, but an "actor."
It is hard for me to answer this question because there are so many options available to do "message passing". The fact that you think there are so few tells me that you really aren't sure what you need to use.
I didn't say there were few options for message passing. I said there were few options for message passing that fit my criteria, which are that any potential solutions should both A) work efficiently and with good performance, and B) be available both pre-Leopard AND on the iPhone. -performSelector: ain't available before Leopard. Distributed Objects is overkill. Kernel Mach messages apparently have a high overhead, too, as my experience with the third-party library I wrote about in my original message shows.
...consider notifications.
I thought notifications couldn't be posted across threads, either. How do I post a notification to another thread's default notification center or notification queue from a different thread?
The notification center is owned by the process. Each run loop can listen for just the notifications it wants. You don't "pass" or "send" notifications, you run then up the flagpole for all to see.
I am aware of how to use notifications. The documentation for NSNotificationCenter clearly states that "In a multithreaded application, notifications are always delivered in the thread in which the notification was posted, which may not be the same thread in which an observer registered itself."
So, again, I don't see how one thread can post a notification in such a way that the observer's registered method is executed in another thread (posting notifications "across threads"). This probably isn't a big deal if you are using mutexes (assuming you don't actually care which thread carries out the task associated with the notification posting), but as I said before, this is not what I'm after.
I don't know what you are really after.
Allow me to attempt to explain a second time, in a more concise fashion.
My app will have multiple, persistent TCP connections open, one connection per remote device. The user will be able to select a task to execute on a particular device that we have a connection open to, and get back from the application real-time updates as to the progress or results of the execution of that task. In certain cases, the length of the task is infinite; it will keep executing forever and sending back results to my application which will update its display of the results every second that ticks by until the user STOPS that particular task.
This can be done simply using async I/O in the main runloop, sure. But if I were going to thread this so that I could be processing the results I've received back from one *or more* remote devices while also doing something else, given that I will only have one (persistent) connection open to any given remote device that I'm interacting with (that is to say, I won't be opening up a separate TCP session for every single task I want to execute on a single device simultaneously), it makes sense _to me_ to implement this as I've described: with every connection to each remote device getting its own thread that lasts for the lifetime of the TCP session (which could be the entire time the application is running, times however many devices the user wishes to be connected to while in the app). I won't be spawning a new thread for every task the user wishes to ask a remote device to do.
This is why (I think) I need bi-directional messaging between the main thread and each of these threads dedicated to a given remote device that we have an active session with/connection to. The main thread needs to be able to tell remote device X (which already has a running thread dedicated to it) to do task A, and then get real-time feedback from that remote device so that the main thread can be displaying it to the user as it is coming back. Same with remote device Y running task B, simultaneously. At any time during the execution of these tasks, the user needs to be able to tell my app to stop one of these tasks, and the main thread needs to send that message to one of the remote devices via that device's dedicated thread.
This is why I am talking about this in terms of the "actor model," and not the "worker thread model," because the former model seems to fit what I want to do.
-- Nathan

Empty File Handling : Do Not Create Message

Hi,
I have set this option in Sender CC - file.
Parameters --> Processing.
I dont want to pass file to reciever , when file is empty.
Will the above option "Do Not Create Message" do the trick.
OR do i need to choose something else??
-santosh.

Santosh,
Yes. The trick will work for empty file handling.
When your incoming file is empty then will be no xml message posted to IE and hence receiver will not get any message.
FYI: Also you can use skip empty files which will do the same but here the files will remain in your source directory.
Regards,
Prasanthi.

Parent Child message passing

I was hoping you guys could give me a little advice on message passing between child and parent classes.
I'm working on a pretty basic booking system, with a front end GUI for data entry. Currently i have a basic JFrame GUI class, the back end of the system that deals with storing/manipulating data and other such stuff, and a controller class that contains both the GUI class and the back end classes.
My goal was to keep the GUI and back end separate, however this is causing me problems when it comes to passing data around...
I want to be able to search through customer details, and return the matching ones, but i'm stuck as to how I pass the message back properly.
Basically i am asking how can i get a child class (the GUI) to pass messages back to its parent (the controler class)?
I know i could just put the controller class in as an attribute of the GUI class, but i'd like to avoid that if at all possible.
i'm pretty sure that it is possible as i remember a lecturer teaching us something similar to that at one point, but that was several years ago now and i do not remember any of the syntax or keywords.
any links or advice would be greatly appreciated
thanks

Christof,
yes keep the controller in control... the GUI should not be "coupled" to it.
** I think what you're after is the Data Access Object Pattern. It's extremely clever. Yep, I'm a fan.
** Yep, just pass back the dataset as an object, probably as a collection (maybe ArrayList) of data-transfer-objects... checkout the collections tutorial...
Keith.

Sender File adapter - Error after upgrade to SP16 !!

Hi ,
After upgrade from SP14 to SP16 , i see this error in Adapter monitor in rwb. The file does not get picked up. Any ideas on how to troubleshoot this ?
Configured at 2006-04-20 06:50:27 GMT
History:
- 2006-04-20 09:55:00 GMT: Retry interval started. Length: 30.000 s
- 2006-04-20 09:55:00 GMT: Error: BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
- 2006-04-20 09:55:00 GMT: Processing started
- 2006-04-20 09:54:36 GMT: Error: BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
- 2006-04-20 09:54:33 GMT: Processing started
Is there a patch that will fix this issue ?
Regards
matthias isenburg

thanks for yours tipps...
here the output of the defaultTrace.trc:
[EXCEPTION]
com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
     at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0.process(ModuleLocalLocalObjectImpl0.java:118)
     at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java(Compiled Code))
     at com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0.process(ModuleProcessorLocalLocalObjectImpl0.java(Compiled Code))
     at com.sap.aii.adapter.file.File2XI.send(File2XI.java(Compiled Code))
     at com.sap.aii.adapter.file.File2XI.processFtpList(File2XI.java(Compiled Code))
     at com.sap.aii.adapter.file.File2XI.invoke(File2XI.java(Compiled Code))
     at com.sap.aii.af.service.scheduler.JobBroker$Worker.run(JobBroker.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code))
     at java.security.AccessController.doPrivileged1(Native Method)
     at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))
Caused by: javax.xml.transform.TransformerFactoryConfigurationError: Provider com.sap.engine.lib.jaxp.TransformerFactoryImpl not found
     at javax.xml.transform.TransformerFactory.newInstance(Unknown Source)
     at com.euh.FileModule.GetFileNameBean.process(GetFileNameBean.java:76)
     at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0.process(ModuleLocalLocalObjectImpl0.java:103)
     ... 11 more
Error during processing local bean localejbs/sap.com/com.euh.FileModule/GetFileNameBean
Module Exception 'com.sap.aii.af.mp.processor.ModuleProcessorException: Processing Error caused by: com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.' found, cause: com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
Channel Orders_ftp_sender: Sending file failed with com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback. - continue processing
Should this traces give me more information?
mfg,
matthias

Empty Mailboxes after Time Machine Recovery

I just replace my iMac's hard drive and used Time Machine to restore software. However all my mailboxes are now empty, except for 8 new mail messages in my Inbox. Can someone please tell me how to find and restore my mailboxes? Thanks in anticipation.

Hey! I got an simliar problem her. My local folder in Mail seems to be empty after recovering my mac from TimeMachine.
But when i activate TimeMachine, all Mails are shown as "today". But no possibility to view them in Mail.

VIP Mailbox Empty even after Notifications show up

Hello there guys
The mail app has been acting up on me lately. The craziest thing that is happening to me however, is that the VIP mailbox is completely empty even after I have received mail notifications (they also appear on my NC).
I have tried rebuilding the mailbox twice with no success, and I am baffled because I have the exact same VIP mailboxes set up on my phone (that's the magic of iCloud) and it displays properly there.
Thank you beforehand

Hi,
In the Messages Menu > Preferences > General section.
Tick the box on the line about "When I Quit, Set my Status to Off Line"
This will stop the IMAgent support app form "listening" to the AIM. Jabber or even Yahoo servers for 'new' messages.
In Messages beta it also seemed to work for the iMessages account but it no longer seems to do this.
It is this "feature" to Listen to the servers that makes this bit the correct function
Whether I am logged into accounts on Messages or not, whether the app is even open or not, I get a loud *ding* and a banner pop-up when someone sends me an IM, text or iMessage.
For the iMessages account you should untick the "Enable this Account" box to be sure.
If SMS Text Forwarding is Enabled then set the iPhone to Do Not Disturb so it too is isolated from the server and then an pairing or Sync to the iPhone number should also be excluded.
9:11 pm Friday; November 14, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

I downloaded the new iOS 6 for my iphone 4. I have 2 iphones on my account and after the "upgrade" text messages go to both phones. When I send a text to my wife I recieve the same text and vise versa. How can I fix this?

I downloaded the new iOS 6 for my iphone 4. I have 2 iphones on my account and after the "upgrade" text messages go to both phones. When I send a text to my wife I recieve the same text and vise versa. How can I fix this?

"Sounds like you guys are using the same apple id for imessage. You will need to create a separate id for you wife. OR go to settings - message - receive&send and make sure your phone number is the default for both you and yoru wife.

Problem in Predefined Properties after SP14 upgrade

Hi,
we are facing one Problem after the SP14 upgrade in the Development environment.The Problem is as follows:
Actually we have defined some Predefined metadata Properties which give us option of country and Locality while uploading any Document.The Property of Country and Locality are Interlinked and whenever user check the country checkbox (Like China) the interdependent Locality List appears (like Shanghai).But after SP14 upgrade whenever we are clicking the country checkbox the Loclity checkboxes are not appearing.(Even though some processing happens).I have checked all the configuration under System admin >Global services> Property Metada -->Group and Properties.Property Structures -->Property Groups etc and match them with all the properties of that in the Production environment.But we don't find any property missing like Dependencies etc.
Is there anything else we need to check?Anybody of you have faced the same Problem earlier?
Please Help It is urgent
Regards
Imran

Dear Imran,
we dint migrate the properties to the new server.
we have created those properties again in our new server.
I am using those properties for two purposes
1.to refine the search ,adding them in the search option set.
here i am able to see the all properties and there dependedncy .
its working fine.
2. while uploading the documnets.
I created a metadata group mapped those properties to all groups.
all process as we have done in our old server.
here i am able to view all the properties except 1.
for ex country and city
I am able to see the property country ,
but the property city is not visible only .
where as i can see both the properties in search and working as desired .
If the problem is with patch,then it should either not work in the search also.
can u please suggest me on this .
Thanks in advance
Regards
swetha pola

Issues with iphoto after hard drive failure - message "library was created with an unreleased version of iphoto"

I have a late model 2008 13" MacBook that was running OS X 10.5.8 when the hard drive failed 2 weeks ago when I was traveling in Canada. I found a Mac repair centre and they replaced my 250GB with a 500GB hard drive and transferred my data. (Yeah!!!) I'm now on OS X 10.6.8 (which is great as I guess I should be able to sync my iphone on IOS 7 with my laptop again.... but I digress...)
I haven't been able to access my photos as I get the message "The photo library was created with an unreleased version of iphoto. Please quit and upgrade this photo library by opening it in iphoto 2 or iphoto 4" when I try to open it. I can see my photos when I look on Photo Browser in Mail so that's good - they are here... I looked through past messages with this problem and saw that the advise was to download iphoto Library Manager. I want to be certain I don't mess anything up so the questions are:
1. What version of iphoto Library Manager should I download - I had OS X 10.5.8 and my iphoto library was ... (sorry - can't find out what it was, guess it's now 7.1.5)
2. What do I do after I've downloaded IPLM?
Many thanks ahead of time for any assistance

I backed up my iPhoto Library to an external drive even though it looked way to small to hold all my photos. I have tried several times to open iPhoto whilst depressing the option and command keys but get the same message again:
"The photo library was created with an unreleased version of iphoto. Please quit and upgrade this photo library by opening it in iphoto 2 or iphoto 4" Behind this, the little wheel is turning and it says "Loading Photos" (but it doesn't).
I've got to access these photos for a project deadline that's looming so any help would be really appreciated.

Wont open, then after a while a message pops up

i click on itunes and it wont open,but after a while a message pops up that says that itunes needs to shut down, i have tried reinstalling itunes and the same thing keeps on happening. please help, i am dying for some new music.
P.S. My audio card wont work, but my speakers still do. Do you know anything about that? thanks

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

Empty SXI_MONITOR after SP14 to SP16 (Messages passing without problem)

Similar Messages

Maybe you are looking for