Empty Temporary Internet Files not working with IE9

Hey everyone.  I have an issue in my domain environment where the "Empty Temporary Internet files folder when browser is closed" is enabled but not actually working for pc's that have IE9.  
I have configured this policy in both Computer Config and User Config on separate occasions to see if it would work but it just doesn't for users IE9.  My domain is still a Server 2003 domain and I manage group policy through the RSAT Tool Group Policy
Management on my machine.  All machines in my environment are Windows 7 x64 with IE9 except for a few with IE11.  The funny thing is the computers with IE11 (like myself) the GPO works great.  The temporary files get
flushed whenever I close my browser.  Unfortunately everyone with IE9 the settings say they are applied but they do not work.  I was wondering if it had something to do with the inetres.admx files on my pc since I use IE11.  Anyone have any
ideas why the policy would only work for IE11 browsers instead of all browsers? 
The temporary IE folders are in the default locations and I noticed that the IE9 users can't navigate to the content.ie5 directory as well.  When entering content.ie5 in path they can get to it and when clicking on the random directory's it prompts you
with a windows security warning.  
Any help or guidance would be great. Thanks!
----E----

Hi,
Based on the decription, we can try to enable the following policy setting to see if it helps:
Computer configuration or User Configuration\Policies\Administrative Templates\Windows Components\Internet Explorer\Delete Browsing History\Allow deleting browsing history on exit 
Regarding this point, the following thread can be referred to for more information.
Empty Temporary Internet Files Folder when brower is close does not work in windows 7 X64
https://social.technet.microsoft.com/Forums/en-US/f48d22f7-d46f-40ce-bc40-04b7d3a05405/empty-temporary-internet-files-folder-when-brower-is-close-does-not-work-in-windows-7-x64?forum=w7itproinstall
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

  • .psd file not working with Motion 5

    I have a .psd that doesn't want to work with Motion 5.  Every time I try and import it, Motion says that it's not a valid codec.  I can't figurt out what's going on, all my other .psd files seem to work.
    Yes, I'm using RGB colors not CMYK (that is the onne known issue thus far).
    I'm just totally at a lose.  Here's what the console says, if anyone has any insight, I woudl appreciate it:
    6/27/11 1:12:55 PM          [0x0-0xb50b5].com.apple.motionapp[1326]          CPSDSlicesResourceItem::Load(): unsupported slice resource item version (8)
    6/27/11 1:12:55 PM          Motion[1326]          -[ProPSDImageRef initWithPath:] - WARNING - invalid or nonexistent file at /Users/compy/Desktop/PostAppointmetVideo/Corrolary Projects/mockup.psd. Image ref not created.

    I'd be happy to email one of them to you if you'd like.  Or give it to you in some fashion at any rate.  I'm not seeing this problem pop up anywhere else on the internet, so I'm guessing it's just me.  But it would be nice to check with another motion user.
    Email me at jay <no space, just keeping the bots guessing> carr <at> gmail <I'm sure you can guess> com.
    It certainly would be nice to see what happens when I give it to you.  I'm having some very significant issues with PDFs and can't figure out why...

  • Reading the EDI X12 file not working with the patch 8233048

    Hi
    I have installed the latest path 8233048 on my windowsXP system, now I am not able to see the File being polled and processed.
    In b2b.log I can see the last message as "oracle.tip.adapter.b2b.data.MsgListener:run start listening on message" after that no log.
    In b2b_dc_transport.log, I can see only
    2009.02.07 at 20:35:45:236: B2BStarter thread: (DEBUG) TransportProperties.TransportProperties():http.receiver.registry_port=5110;smtp.receiver.protocol=imap;PROTOCOL_ENDPOINT=null;file.receiver.polling_interval=30;polling_interval=30;http.receiver.instance_name=IP;
    2009.02.07 at 20:35:45:266: B2BStarter thread: (DEBUG) initialize TransportReceiver: [IRIS_Transport_Server < file > < IRIS >]
    2009.02.07 at 20:35:45:266: B2BStarter thread: (DEBUG) FileReceiver.init() started ....
    2009.02.07 at 20:35:45:287: B2BStarter thread: (DEBUG) FileReceiver.init() completed.
    Could you please tell me if I need to do any changes.
    This is working on b2b with only patch: 5907304 which is installed in another windows XP system.
    The same configuration with the latest patch is not working.
    Edited by: Praveena Paruchuru on Mar 7, 2009 7:56 AM

    Hi Dheeraj,
    I have restarted my system many times, not only B2B.
    I have taken the print out of both the tip.properties and compared line by line and wanted to check out which line was making it not to function.
    I added the mismatching lines one by one by one, it was working for all teh updates. Finally I changed it to my new tip.properties.
    Then surprisingly it is working.

  • FCP Quicktime movie files not working with iDVD

    I have been using iDVD for years with no issues. Now, whenever I export a QT file from FCP 7 and use it in iDVD, I get a blank screen with audio and no video.
    I am able to work around the problem by using "Export Using Qucktime Conversion" and creating a smaller file, but I've never had to do that before. What in the world am I missing here? Shouldn't I be able to export as a QT movie, as long as the file is not gigantic? (the most recent one I used and had this problem occur was only about 500mb). Thanks for any help...
    Ben

    Hmmm,
    Well this is helpful information but unfortunately didn't solve my problem. The movie in question is only 5 1/2 minutes long. When I export it as a QT movie, iDVD "acts" like everything is fine; I can preview it within iDVD, etc.But when I burn the disc, it comes out blank. I then went back to FCP and exported it using QT conversion, and the DVD burned just fine. (I exclusively use Taiyo Yuden media and have never had a bad disc).
    This is just a simple 16:9 movie, shot at 720/30p on a Canon DSLR. I ingested with Log and Transfer using ProRes422, then dropped it onto the timeline, added a music track, rendered, and exported as Quicktime movie. It looks great on my desktop using the QT player, but it simply will not work in iDVD.  Still stuck here...
    Ben

  • Lumia 920 Internet Sharing not working with Window...

    I am unable to get Internet Sharing to work from a nokia Lumia 920 to Dell XPS running Windows 8 with Intel Centrino Wireless-N 1030. Help !!
    Things I have tried:
    + Checked the phone was actually working with Internet sharing:  Different laptop running Winows XP connected fine, everything worked
    + Checked the Dell XPS could connect to inernet sharing using an HTC One as the hot spot: everything worked fine.
    + Tried turning on FIPS: made no difference:
    + Tried updating/different drivers: made no difference
    + Tried turning of N, and only using g: made no difference
    + Tried different access point settigns on the phone: made no difference
    This is one of those things I expect to just work, like it does when the phoen is used with a different laptop, or when a different phone is used with this laptop.
    I've run out of ideas. Any help appreciated.

    Finally fixed it. First I tried using the latest Intel drivers, but to no avail. So I did a driver rollback, and that seems to be working. Driver version now at 14.2.1.3, Microsoft release.
    So problem is a compaitibility issue with the drivers on the windows laptop.  All I can advise others having similar problems is keep trying different drivers (newest not necessarily the best)

  • Does anyone have a solution to HDV 720p25 files not working with Lion?

    I cant play or edit 720p25 HDV files with Lion, does anyone know how to fix this bug?

    i've been having the exact same problems myself since Lion was released.  I've been having to work with .m2t files and then converting them with MPEG StreamClip to Apple ProRes 422 native quicktime files in order to even use the stupid HDD.  All of my existing .MOV files that were on the HDD prior to upgrade are now all "corrupt". Spoke with Apple reps and Focus reps and both of course are pointing fingers at each other.
    Also, found that .m2t files aren't as high quality as shooting with .mov files on the DR-HD100... interesting huh?  I mean i'm not in too much of a pickle due to the fact that the HDD is still useable it's just more time and steps before getting to edit in FCP now which is annoying considering the fact that I shelled out a lot of money for this HDD to be able to edit immediately...
    APPLE PLEASE FIX THIS!!!!
    I know it's Apple's fault because when i shoot in .mov files on the DR-HD100 and bring them in on my mac mini which is still OS X Snow Leopard, they work just fine... so it's definitely a Lion issue...
    Also, found out that once the files have been dragged onto a HDD operating within OS X Lion, they become corrupt FOREVER and you can't reverse the process!  They remain fine on the DR-HD100 but if you drag them onto a OS X Lion machine, then decide to transfer them to a OS X Snow Leopard device via USB, Network, or whatever, it won't matter because they have already been corrupted by Lion!

  • "open file" Not working with Photoshop CS2

    System
    MAc Pro Dual Quad 3Ghz, OS X 10.5.2
    I have a script that I wrote a while ago to take a series of individual bitmaps and compile them into a strip for access inanothe application. Script used to work well....
    I tried to use the script today but ran into a brick wall when trying to open files from within the script.
    below is an example of a script that will not work at all,
    tell application "Adobe Photoshop CS2"
    open file "AV:logo:rot0001.png"
    end tell
    I normally pass the function a variable for the filenames...but the above script should work fine.. but flatly refuses to !
    Below is the Error returned.
    Adobe Photoshop CS2 got an error: General Photoshop error occurred.
    - The object “current document” is not currently available.
    Arghhhh Help !!
    Rgds
    Chris

    Hello
    Perhaps your script used to work under pre-OSX10.5 (AppleScript 1.x) but now fails under OSX10.5 (AppleScript 2.x)?
    If so, the most likely cause is the drastic change in internal text handling between them. In AS2.x, internal text is Unicode only, which might prevent PSCS2 from resolving 'file path_string' descriptor (when path_string is assumed to be plain 'string', not Unicode text).
    Try the following code instead -
    tell application "Adobe Photoshop CS2"
    open ("AV:logo:rot0001.png" as alias)
    end tell
    Or -
    set a to "AV:logo:rot0001.png" as alias
    tell application "Adobe Photoshop CS2"
    open a
    end tell
    Hope this may help,
    H

  • Exe file not working with forced download script.

    I have a captivate file that I exported as an exe file for
    pc. It works fine when I download it from the server using the
    direct URL to the file but I don;t want people to actually see
    where it is located so I have a used a force-download php script.
    When I download it by way of the script... it downloads, but the
    file won't play. All I get is a DOS window pop up and then goes
    away. Same file...any ideas?
    The php file I'm using to force the download is below...
    <?php
    $filename = $_GET['file'];
    // required for IE, otherwise Content-disposition is ignored
    if(ini_get('zlib.output_compression'))
    ini_set('zlib.output_compression', 'Off');
    // addition by Jorg Weske
    $file_extension =
    strtolower(substr(strrchr($filename,"."),1));
    if( $filename == "" )
    echo "<html><title>Download
    Error</title><body>ERROR: download file NOT SPECIFIED.
    USE force-download.php?file=filepath</body></html>";
    exit;
    } elseif ( ! file_exists( $filename ) )
    echo "<html><title>Download
    Error</title><body>ERROR: File not found. USE
    force-download.php?file=filepath</body></html>";
    exit;
    switch( $file_extension )
    case "pdf": $ctype="application/pdf"; break;
    case "exe": $ctype="application/octet-stream"; break;
    case "zip": $ctype="application/x-compressed"; break;
    case "swf": $ctype="application/x-shockwave-flash"; break;
    case "doc": $ctype="application/msword"; break;
    case "xls": $ctype="application/vnd.ms-excel"; break;
    case "ppt": $ctype="application/vnd.ms-powerpoint"; break;
    case "gif": $ctype="image/gif"; break;
    case "png": $ctype="image/png"; break;
    case "jpeg":
    case "jpg": $ctype="image/jpg"; break;
    default: $ctype="application/force-download";
    header("Pragma: public"); // required
    header("Expires: 0");
    header("Cache-Control: must-revalidate, post-check=0,
    pre-check=0");
    header("Cache-Control: private",false); // required for
    certain browsers
    header("Content-Type: $ctype");
    // change, added quotes to allow spaces in filenames, by
    Rajkumar Singh
    header("Content-Disposition: attachment;
    filename=\"".basename($filename)."\";" );
    header("Content-Transfer-Encoding: binary");
    header("Content-Length: ".filesize($filename));
    readfile("$filename");
    exit();
    ?>

    Actually...never mind. This script creates a HUGE security
    risk....

  • In IE7 CLSID In HTML File Not Working With 1.4 and 1.5 Plugins Installed

    Thanks in advance.
    I'm using JRE 1.4.2_03 with a CLSID attribute in my HTML file. It works fine with Internet Explorer 6. If I install a newer version of the JRE (i.e. 1.5.0) IE6 still uses the 1.4.2_03 plugin.
    But, when we install Internet Explorer 7, IE ignores the CLSID in the HTML file and starts the 1.5.0 plugin.
    Has anyone encountered this problem? If so, then how do I solve it?
    Thanks.

    Yes, I solved it by using this classid in the <OBJECT> tag in my HTML file:
    classid = "clsid:CAFEEFAC-0014-0002-FFFF-ABCDEFFEDCBA"
    The "FFFF" in the middle tells the IE browser to use the highest build of the major version of the JRE that you specifiy in the clsid. In the case of my example, above, the browser selects the highest build of JRE 1.4.2. But, the catch is that you have to install JRE 1.5.0 (I think it's 1.5.0_07) or later. Just install 1.5.0_11 and it will work. This may seem strange, but, for some reason, Sun didn't implment the fix in 1.4.

  • Link to an Excel file not working with chrome but working with IE

    Hi,
    I have used following code to create a link to an excel file so that my users can access it... it's working fine with firefox and IE, but not with chrome browser
    Report link
    please advice

    Hi,
    I did look your sample.
    Did you read link I did post?
    >
    Links to local files on pages that were retrieved via HTTP(S) are deliberately disabled in Mozilla/Firefox, because they can be a security risk, and have been used in attacks in the past.
    >
    Regards,
    Jari
    http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME:0

  • Flash Player trust file not working with Embedded browser on linux

    Hi,
    I have an application which embeds a browser based on
    Xulrunner inside it. I have couple of flash swf files I need to
    load in the browser. The swf files talk with a javascript to change
    the page title and also to change the URL when I am browsing
    through the content in the URL. I need the URL change because I
    need to remember where I was in the flash content so that I can go
    directly to that place in the flash file when I open my browser the
    next time.
    To let the swf file do this I created a cfg file and placed
    it into the Flash Player Trust folder( I tried both the local one
    at /home/user/.macromedia/Flash_Player/#Security/FlasPlayerTrust
    and global trust file location at /etc/adobe/FlashPlayerTrust ) ,
    but I didn't get the expected result. I debugged into my app and
    found that the swf never reset the Title of the page( which
    indicates that the javascript was blocked) . It works fine from a
    firefox browser but not from inside my embedded browser. My app
    also works fine on windows and Mac . This is observed only on
    Linux. Can any body think of what else I need to do get my
    javascript embedded in the flash file working?
    Thanks
    jbsp72

    I tried out a few more things since nobody on this forum was
    responding. I tried installing another application which also
    embeds xulrunner browser. So I downloaded Prism which is a simple
    xulrunner based browser. The flash works fine with that and the URL
    gets set appropriately. So is there any setting I need to do to get
    it working. Or could somebody atleast point me to the right place
    to ask this question? :(

  • Batch file not working with Scheduler

    I have written a simple batch file which copies contents of one directory to another directory on second server. Both the servers are Windows 2008 R2 and are member servers in the same domain. It is a simple .bat file which copies contents to another folder
    which is mounted as a network drive . 
    This script when I run it from COmmand Prompt window, it works file. But If I schedule it run at a particular time, it does not run. The scheduler starts the batch file and within a second reports it as complete. The copy does not happen.
    I have also tried robocopy command instead of xcopy. But same result.  It works from the command prompt but scheduler cannot run it. But there is no error reported by scheduler.  e.g. task triggrred 11:43:15  completed 11:43:15. 
    Any suggestions? Inputs?
    From :
    shekhar-nsk

    Hi Shekhar,
    I don't think this issue is related to your script. If you run any other simple script then also you may face the same issue.If yes,
    1) Make sure you are using appropriate credential on task schedular. Change User Or Group if require.
    2) Try to run task with "Run with highest privileges"
    3) Ensure you gave the arguments and parameters properly without missing even quotes.
    Can refer below link for more information on scheduling a PS script and replace the same per your requirement for batch file (.bat).
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/43e19576-476d-4735-85ef-c508c18f11e8/executing-powershell-scripts-via-task-scheduler
    Please remember to mark your question as answered & Vote helpful,if this solves/helps your problem.
    Best Regards,
    Pavan Kumar Sapara
    s p kumar

  • Flash File not working with DW

    "Content on this page requires a newer version of Adobe Flash Player"
    I know others have had this same issue, but after researching and trying everything, I am just not able to fix it.  Anyone out there have any ideas?  I have a website created in flash.  I used DW to import the flash file and upload to the server.  Very simple html page with nothing else but the flash file.
    Here is the website. www.meghanmcmehon.com.  Just need some help here.  Thx.

    Source code indicates that the page is still pointing to a local file for the flash content,
    <param name="movie" value="file:///Macintosh HD/Projects/Matrix Entertainment/Christopher Zurek/3422ZRK Media Files/Site/root.swf" />
    so by default it displays the "get flash" prompt.
    You need to change the all of the reference(s) to point to a file in the root folder, and re-put the page. This includes your javascript ref in the header:
    <script src="Macintosh HD:Projects:McMahon, Meghan:3481MCM Profile:3481MCM Media Files:Site:Scripts:swfobject_modified.js" type="text/javascript"></script>
    Also, you should only work in lower case wherever possible (naming files), to avoid mistakes in file references.

  • D3100 Files Not Working with Update?

    Has anyone else tried loading Nikon D3100 NEF files with the latest update? I was so excited when it came out so I wouldn't have to convert images anymore yet, it still won't open my NEF images.
    Anyone?

    Have you tried LR3.3RC? D3100 should be supported with it and it works for me. If it does not, what error message do you see, and can you upload your Raw file to somewhere in the net (e.g. www.yousendit.com) and post a link to it here?
    Beat Gossweiler
    Switzerland

  • PPCS5 files not working with PPCS6

    Hello Every One.
    I recently upgraded my CS5 To CC, and now I have the PPCS6 because CC is not available until the 17th. when I open some PPCS5 .mpg files with my CS5, everything is fine.
    But when I open the PPCS5 .mpg files with my PPCS, first the Dialog box ask me If I want to convert the file and I click OK, then the file dose appear in my timeline, but when I scroll or click on play I don't see the movie.
    Why the movie has to be converted
    why I can not see the movie
    Thanks.

    What are the details?
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
    For Mac http://mediainspector.massanti.com/

Maybe you are looking for