EMS memory problem on Satellite M40X

Hello.
I'am new user sat. m40x-116. I must use EMS and XMS memory in MS-DOS based programs. But now it's not be. I look with MEM command in dos mode, and my programs messeage is "OUT OF MEMORY". I changed windows xp home to xp pro. But it's negative too. But my all desktop PC and old notebook isn't those problem. I don't understand this problem. I must solve this problem.
Thank you
[Edited by: admin on 09-Jun-05 14:21]

Hello
As far as I know the newest notebooks are created for using WXP and not for using old MS-DOS based applications. You know very well that MS-DOS dont exist any more in the old form and it can not be used successfully.
Architecture on new notebooks is construed or designed for NT technology and not for old MS-DOS technology.
In my opinion you should try to find a windows version of your old MS-DOS based program (if exists).
Good luck!

Similar Messages

Memory problems on Satellite L30-101

I have a toshiba satellite l30-101 laptop and wanted to upgrade RAM, so i bought 2x 1GB sticks to put in it.
Now i couldnt find any 533mhz ones so i bought 2 667mhz after a spoke to a technical guy who said if i got 2 of same speed it would work fine.
Only it doesnt at all i can put one stick in and it runs fine with the 533mhz.
One i have in if i try and put both new sticks in it comes up with memory errors and I get the bsod which restarts my comp and would not allow me to run my games or other programs.
Is there anyway to make it so I can have both of the new sticks in as i really need the ram and dont want to buy diff ones.
I mean if I can get one to work other one should surely work right ?
please help im going mad trying to fix the damn thing

Hi
I think the memory speed has nothing to do with the BSOD!
In my opinion the BSOD appears due to the memory module malfunction!
Furthermore the L30-101 supports only the 533 Mhz FSB. In this case you will be not able to run the 667Mhz memory modules with full speed.
The modules will run only at 533Mhz!!!
So in my opinion you should replace the faulty module with a one which works fine!
Best regards

Error message on Windows 2003 and Satellite M40x-184

hi
my laptop is Satellite M40x-184
with Os Xp Home edition
I want to insatall a second Os which is Windows 2003
but while installing it, happend a problem and the gives me a blue screen with this message:
'hardware malfunction nmi parity check / memory parity error the system has halted'
Please tell me how i can install 2 Os xp home edition and Windows 2003
thanks

Hi
This error message can occur if a hardware component malfunctions, or if there are damaged or incompatible drivers installed.
To solve this problem remove any extra memory modules that are in the computer, leaving only the least amount that is required for the computer to start and run Windows. Restart the computer to see whether the error messages persist.
This issue was described on the Microsoft website.
Please check this site:
http://support.microsoft.com/default.aspx?scid=kb;en-us;315223&product=winxp

Memory errors at Satellite P105-s6177

Hello all
I have Toshiba Satellite P105-s6177. It's been exhibiting classic symptoms of memory problems for months - I get random bsod's with reasons like MEMORY_MANAGEMENT, BAD_POOL_HEADER and a few others I can't quite recall, mostly something about a page fault in an unpaged area. it's been through multiple reformats to no avail. I ran the windows memory test and it said I had a RAM error within seconds of starting.
Recently I tried to reformat it from the backup discs that Toshiba provided with the computer, and the computer got a BSOD in the middle of the reformatting process. I've since tried a few more times, and get what Google tells me is a RAM error. I took out one piece of RAM, tried it, replaced the RAM and took out the other piece, tried it, and keep getting memory errors. I apologize as i don't recall the name of the specific error I keep getting, I will try to provide it as soon as possible.
Basically, i've narrowed it down to either both pieces of RAM being corrupted or a virus in the BIOS simulating a RAM error. Is there any way I can test for a virus in the BIOS? Currently I can't even get the computer to boot, it has no operating system installed on it due to the reformatting fiasco. The most I can do is bring up a command prompt.
Thanks for your time and attention.

Hi
> I ran the windows memory test and it said I had a RAM error
As you already posted in your first message everything looks like the RAM malfunction.
But these are only suggestions and in the forum nobody will be able to say exactly if this is really a memory issue without any detailed checks
So you will need to buy a supported RAM and would need to test it
Good luck

Need help in power saving utility (Satellite M40x)

Hi all
I am new in this forum, I need a help, as when ever I am pressing Toshiba power saver it tell me that I have to open the windows power options and use the Toshiba power saver but I can find it there in the schemes I think I deleted it by mistake from schemes scroll.. So how can I restore it so I can use Toshiba power saver?
My notebook is Toshiba Satellite M40x
plz reply soon also u can add me to your msn messenger : my id is :
[email protected]
Thx in advance
adham

When you push the button, toshiba power setting should appear without any message. I set up parameters directly from Toshiba utility so the message you get to open windows power management reveals there is a problem.
Try to reinstall toshiba power saver utility from the recovery cd or you can download it from the drivers download in the official site.

DVD drive not writing - Satellite M40X-175

im having a problem w/ my dvd. i tried to burn my movies, music and my files into a dvdr or cdr, i even tried dvdrw and cdrw but everytime i do it gives an error "d:\ is not accessible incorrect function". but when i try to watch a dvd movie or play my music cd, it does work. it reads. does this mean that my dvd drive can only read and not write?
[Edited by: admin on 04-Feb-06 20:23]

Hi there,
I think Satellite M40X is new enough to have CD writing feature. Seems to me a HW issue but you can try:
1- clean the empty CD with a dry cloth
2- blow to the lens and be sure there is no dust
3- you can uninstall its driver from
control panel-> system -> hardware -> device manager -> DVD-RAM -> (right click) properties -> driver -> Uninstall -> restart your laptop.
If they do not help you can contact an Authorised Service Partner of Toshiba. You can find the nearest one from http://217.45.123.236/toshiba/resellerselector.nsf/WebServiceProv?OpenForm

Windows XP and Satellite M40X - programs are crashing

Hi, I recently purchased the satellite m40x from Germany. The windows was in German hence after coming back to India, I tried to install the University Licensed version of Windows XP on it.
I have tried many versions of windows with and without service packs but the problem remains that with many applications like Yahoo! Messenger 7 and Nero Start Smart and Age of empires and many others .. the programs crash. I am not able to understand the reason behind this. With the german windows all these programs were working.
after the installations the program works but after restarting the computer it starts giving error. Some of the older messenger versions are working But no version of nero is not working.
Please help me .. thanks
[Edited by: admin on 17-Aug-05 17:43]

I tried to install it with the installation instructions but could not get the following packages
acrobat reader V6.0.1_6.0.2_BASIC
dla V4.95BUILD490B69B
smc fir driver FIR\V5.1.3600.5_R101(LOGO)
record now V7.22BUILD720B80E
sun java 2 runtime environment V1.5.0
I am still getting the same errors with Yahoo Mnessenger 7 and Nero after complete installation.
Toshiba Asia cannot provide any support because this model has not been launched in India as yet.
Please help.

Re: Need drivers for Satellite M40x

Hello,
I have a big problem.... I cannot find the drivers for my Toshiba Satellite M40x-267 (PSM4XE-03401UFR).
PLEASE I need these drivers (for all... mother board etc and especially for the display driver).
Thanks, if it is possible one mail to [email protected]

Hi
I agree with Timox.
The Satellite M40x is pretty old notebook and therefore you have to search in *Archive* for drivers. Thats all!
Then you can see and download all drivers for it.
If you have more questions, please let us know! :)

Satellite M40X-184's DVD/CD-RW drive unable to read CDs

I have a three month old Satellite M40X-184 with Mat****a UJDA760 DVD/CD-RW drive. Last few days the optical drive is unable to read any type of CDs. But it can read DVDs. Can somebody please tell me what's wrong with it? Is the drive broken? Is it necessary to replace the DVD/CD-RW with a new drive? Thanks.

Hi
It is not easy to say if the drive is defective but you should anyway contact your local dealer. The warranty is valid and if there is some technical problem the drive will be replaced.
I dont know if this can help but you can try to remove the drive from device manager and restart the unit. The drive will be recognized and installed properly. If there is the problem with original music CDs you should really contact the local dealer.
Before the unit will be checked I believe that the best way to check it properly is to preinstall the unit with recovery media. The same thing will be done by technicians before hardware replacement. If you want you can do it too.

LCD turns off for no reason - Satellite M40X

I have a problem with my Satellite M40X notebook, I'm working when the LCD turn off and I hear two bips. To turn on the LCD I need to restart the notebook but the problem persist after a few minutes.
Anyone can help me, please.

Hi
Please compare the BIOS version which was installed on the notebook with the published one on the Toshiba driver page.
If you use the older BIOS you could try to update it. Maybe the update will sort out this strange behaviour.
But there could be also an hardware malfunction if the BIOS update doesn't help.

Satellite M40X: After Bios update keyboard keys don't work properly

I have a Satellite M40X and I had update the Bios to v. 1.60 and now the keys u, m, 7 and the arrow up are not working properly. The problem is that there is not other Bios version to use.
How can I resolve my problem?
Can I recover the old bios version?
Thanks
Gabriel

Hi there,
no you wont be able to recover the old BIOS. The only two options are:
1. Retry the BIOS update and check if its working
2. In case of no success, please visit the [ASP Locator|http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT] to search for the nearest ASP in your country and to ask them for a hardware checkup and repair.
Greets

Memory expansion on Satellite 2410

Hi
I am planning to expand the memory of my Satellite 2410-601. It has 256 MB DDR at present. I am planning on using one more 256 memory module to expand the total memory to 512 MB.
What I would like to know is whether I can use any of the DDR memory modules available in market? Would there be any compatibility issues?

Hi
Do you know this site?
http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=5548&ft=m&st=3
Here you can find the details about compatible memory modules for Satellite 2410-601.
It seems that the notebook is able to handle the 200-Pin PC2100 (266MHz) DDR SODIMM memory modules!!!
You could upgrade the memory up to max 1GB (2x 512MB)
>Would there be any compatibility issues?
Generally you shouldnt have any compatibility issues. Its only important that you use the supported modules.
Greetings

Memory upgrade on Satellite A60-218

Hi,
Is it possible to upgrade the memory for the Satellite A60-218 models?
I've heard that the memory is onboard (internal) and cannot be replaced. Is this true?
If not, could somebody give me a hint where can I find the memory modules on this model?
I have tried disassembling it without success.
Thanks!
Levente

Hello
Just for info: Satellite A60 has 512 MB internal memory and one sot only is available for upgrade. This unit can handle with max 1,5 GB of RAM. On the bottom side in the middle there is placed memory module cover. Remove it and you will find RAM slot.
For RAM upgrade you can use follow compatible memory modules:
PC2700 512MB (PA3312U-1M51)
PC2700 1024MB (PA3313U-1M1G)
If you have more questions please write again.
Bye and good luck!

Memory Problem with SEt and GET parameter

hi,
I m doing exits. I have one exit for importing and another one for changing parameter.
SET PARAMETER exit code is ....
*data:v_nba like eban-bsart,
       v_nbc like eban-bsart,
       v_nbo like eban-bsart.
       v_nbc = 'CAPX'.
       v_nbo = 'OPEX'.
       v_nba = 'OVH'.
if im_data_new-werks is initial.
if im_data_new-knttp is initial.
    if im_data_new-bsart = 'NBC' or im_data_new-bsart = 'SERC' or im_data_new-bsart = 'SERI'
       or im_data_new-bsart = 'SER' or im_data_new-bsart = 'SERM' or im_data_new-bsart = 'NBI'.
      set parameter id 'ZC1' field v_nbc.
    elseif im_data_new-bsart = 'NBO' or im_data_new-bsart = 'NBM' or im_data_new-bsart = 'SERO'.
      set parameter id 'ZC2' field v_nbo.
    elseif im_data_new-bsart = 'NBA' or im_data_new-bsart = 'SERA'.
      set parameter id 'ZC3' field v_nba.
    endif.
endif.
endif. *
and GET PARAMETER CODE IS....
get parameter id 'ZC1' field c_fmderive-fund.
get parameter id 'ZC2' field c_fmderive-fund.
get parameter id 'ZC3' field c_fmderive-fund.
FREE MEMORY ID 'ZC1'.
FREE MEMORY ID 'ZC2'.
   FREE MEMORY ID 'ZC3'.
In this code i m facing memory problem.
It is not refreshing the memory every time.
So plz give me proper solution.
Its urgent.
Thanks
Ranveer

Hi,
   I suppose you are trying to store some particular value in memory in one program and then retieve it in another.
If so try using EXPORT data TO MEMORY ID 'ZC1'. and IMPORT data FROM MEMORY ID 'ZC1'.
To use SET PARAMETER/GET PARAMETER the specified parameter name should be in table TPARA. Which I don't think is there in your case.
Sample Code :
Data declarations for the function codes to be transferred
DATA : v_first TYPE syucomm,
       v_second TYPE syucomm.
CONSTANTS : c_memid TYPE char10 VALUE 'ZCCBPR1'.
Move the function codes to the program varaibles
v_first = gv_bdt_fcode.
v_second = sy-ucomm.
Export the function codes to Memory ID
EXPORT v_first
       v_second TO MEMORY ID c_memid.        "ZCCBPR1 --- Here you are sending the values to memory
Then retrieve it.
Retrieve the function codes from the Memory ID
IMPORT v_first TO v_fcode_1
         v_second TO v_fcode_2
FROM MEMORY ID c_memid.                                   "ZCCBPR1
FREE MEMORY ID c_memid.                                   "ZCCBPR1
After reading the values from memory ID free them your problem should be solved.
Thanks
Barada
Edited by: Baradakanta Swain on May 27, 2008 10:20 AM

Memory Problems with Adobe PDF iFilter for 64-bit

In preparation to rebuild my Windows Search Index, I installed the Adobe PDF iFilter for 64-bit on my system (Vista Business 64). When I finally rebuilt the index, I wasn't too surprised by what I saw happen, namely, the SearchFilter.exe process would kick in whenever I wasn't using the system and just eat RAM. One time I turned it on and it had allocated over 4,000 MB (and my system only has 4,030 MB available) so of course it was forcing all the other processes to hard fault (ie. everything was moving like molasses--for example, it took 20 minutes to put the thing to sleep). But I just let it do it's work, figuring that perhaps this was to be expected relative to the small library of PDF's that I've accumulated on my computer, ranging from LaTeX generated text files, to containers for hi-res scans. So, after a day and a half of basically not using my laptop, everything finally calmed down and I enjoyed the benefits of searching the content of my library from the Windows Start menu--for a short while.
However, to my dismay I've encountered the problem that this freezing of my computer would now occur after everytime I download a new PDF (in this particular case they were Google Books scans) and then left the computer to idle. Again, the SearchFilter.exe would allocate all of my RAM for itself and just push everything else onto the Virtual RAM, which means the SLOWEST possibly fetching you can get. I had to uninstall as this was making my computer unusable for 15-30 minutes after each idle. Everything is back in working order without the iFilter, but I would like to know if anyone has reported such problems on x64 systems. Obviously, I will also report the problem to Microsoft, since the search engine should certainly have the precaution to handle such memory problems.   However, it is a problem that is created by the Adobe PDF iFilter interacting with the Windows Search engine.

Hello,
We believe we have figured this out. It looks like it has to do with the length of the default folder location for the Adobe iFilter.
I was able to reproduce the issue and the following resolved it for me. See if this resolves it for you all as well.
Here is how to get Adobe Version 11 PDF filter to work.
1 . If you haven’t already, run the following in SQL Server:
Sp_fulltext_service ‘Load_os_resources’, 1
Go
--you might also need to run:
sp_fulltext_service ‘Verify_signature’,0 --This is used to validate trusted iFilters. 0 disables it. So use with caution.
--go
2. Stop SQL Server. (Make sure FDHost.exe stops)
3.
Uninstall the Adobe ifilter (because it defaulted to having spaces or the folder name is too long).
4.
Reinstall the Adobe iFilter and when it prompts for where to install it, change it to: C:\Program Files\Adobe\PDFiFilter
5.  Once the installation finishes, go the computer’s Environment variables. Add the following to the PATH.
C:\Program Files\Adobe\PDFiFilter\BIN
NOTE: it must include the BIN folder
NOTE: If you had the OLD location that included spaces, remove it from the path environment variable.
6. Start SQL Server
7.  IF you had an existing Full-text index on PDFs, drop the full-text index and recreate it.
8. You should now get results when you run sys.dm_fts_index_keywords('db','tblname') --Note: Change db to be the actual database name and tblname to be the actual table name.
Give this a try and see if this fixes yours.
Sincerely,
Rob Beene, MSFT

EMS memory problem on Satellite M40X

Similar Messages

Maybe you are looking for