EMU 0404 - audio technica ADG1 mic not working

Have a E-MU 0404, Windows 7 64 bit. Headphones and audio outs working fine. Need help with mic issue. Mic not working with this headset or my other ones. Mic input ports working, as I tested with a traditional mic with phantom power on. The headset mics do work, tested them with computer inputs.
Also bought and tried a mic preamp with no luck when plugging in the headset mic.
Why won't the 0404 pick up my gaming headphone mics, and what can I do to fix this?
Thank you in advance.

jonathanwesley wrote:
I'm really interested to know what settings i should have in the ASIO full duplex program
it has
INPUT
X Asio Driver
X Emu
OUTPUT
X Asio Driver
X Emu
the order is an issue, and whether or not they should be checked..
Hmm... you shouln't use those ASIO drivers which are installed by Cubase installer (ASIO MME / ASIO DirectX).
Since I don't know the version of Cubase you're using (a bit different device setup system in each version), I can only suggest you to select the "ASIO E-MU 0x0x | USB" driver (device setup) and then set up the I/Os and MIDI ports. You'll find information on how to do it by reading bundled Cubase guides (paper or PDF) ... if you don't have these guides, you'll get all downloaded from Steinberg's site:
ftp://www.steinberg.net/Download/
jutapa

Similar Messages

Both internal and USB mics not working

Hi there, all. Long-time lurker, first-time poster. Starting last night, I have been having issues with microphone use on my iBook G4. Neither the internal mic nor my USB headset mic (Altec Lansing AHS302USB) are accepting input.
The internal mic's failure doesn't surprise me, as I have heard about the delicate nature of the wire connecting the internal mic from its position on the display down to the main computer. It's the USB mic that confuses me, since USB mics are what everyone seems to recommend that people use when the internal mic is on the fritz (thanks to other mics not working with Mac due to the line-in thing). Also there is the fact that I have used this headset with this computer for over a year with no significant issues until now, with both mics simultaneously failing.
There doesn't seem to be a problem with the headset's wires; I am still able to hear audio through the headphones quite well, and when I load my audio recording program (Audio In) and Sound Preferences, I can see the occasional blip of sound recognition when I move the USB adapter portion around in the port. These blips even occur when the pink microphone jack and headphones jack are unplugged from the adapter, so this suggests to me that the problem lies not with the wires, but somewhere in the USB adapter, port, or the computer itself.
I'm leaning toward the computer itself, since it just seems odd that both mics would just happen to stop working at the same time. That and the fact that audio output still works through the headset, and the USB ports work fine for other USB devices such as my external drive and iPod.
I have tried restarting, resetting the PRAM, and repairing permissions with Disk Utility. Nothing's working so far.
Does anyone have any idea what could possibly be wrong?
For reference's sake, I took a recording of the sound that results from jiggling the USB headset adapter in the port. It's very quiet, so you may need to turn up the volume a little bit to hear it. Again, these are the ONLY sounds that the mic is able to pick up currently.
http://animeutahime.com/temp/faultymicrecording.mp3
iBook G4 Mac OS X (10.4.10) 768 MB RAM, 37.7 GB hard disk

Just to chime in here - I wonder if it's down to the software: I've recently updated to 10.4.10, and the internal mic seems to have stopped working.
One positive effect of the change to 10.4.10 is that my Griffin iMic no longer flips to 8-bit, 22khz recording when I plug it in.
Having said that, I really like to get my internal mic back up and running again.
iBook Mac OS X (10.4.10) 1.5gb RAM, 60gb hard disk

Internal mic not working after updating to 10.10.1

After updating to 10.10.1 (from 10.10) on my MacBook pro 2010 (15” screen) the internal mic is not working when using FaceTime (or Skype) and so the person on the other end of the video/audio call is unable to hear me. On my end there is a static/crackly sound during FaceTime (or Skype) connecting since the update which I believe is related to the mic problem (no sound input on Mac during FaceTime/Skype).
HELP!!!

I had exactly this same issue and and this workaround from Paul on another thread (Internal Mic not working for phone calls in Yosemite ) solved it :
Make sure FaceTime App is not running
Open Terminal
type sudo killall coreaudiod
Press Return
Enter your computer's admin PW

X220 Internal Mic not working

I had just get a new X220 in recent days.
And I found the internal mic not working, I can not record any sound through Sound Record or Skype.
I had tried all the following methods, but the mic still can not working. Anyone cound give me some suggestion ?
1) update sound card driver to 8.32.23.2
2) Fn+F6, change between "only my voice" or "Multiple voice"
4) UnInstall source card driver and use microsoft generic driver
3) The method in http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T420-internal-mic-problem/td-p/435551/page/..., operate like :
Start -> control Panel -> Sound
Click on the "Recording" tab
Click Internal Microphone to highlight it
Click Properties
Click the "Advanced" tab
Uncheck "Enable audio enhancements"
Finally, click the "Levels" tab and turn Microphone Boost to 0dB. (if you don't do this the noise will be even louder than before).
Click apply.

hey kitewind,
welcome to the forums and since you have tested the microphone using microsoft generic drivers and i'm guessing it did not work; therefore the best action for you right now is to contact our tech support group via
http://bit.ly/LNVsuppNum
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

IPhone 2G voice mic not working

Has anyone come across iPhone 2G voice mic not working (not being heard by the other person) but works fine on speaker phone and bluetooth headset. It has been working fine so far and suddenly developed this problem! Any help is highly appreciated….

I had that problem with my iPhone 3G after about 5 days.
I just had Apple take a look at it.
They cleaned it out, called it and stuff.
Didn't work.
Since I didn't drop it in water and it was not my fault in any way, they gave me a brand new one.

Audio CD import is not working the cd is ejected before itunes can read it

audio CD import is not working the cd is ejected before itunes can read it. Does anyone know how to fix this?
Lainey

Does this happen with all cd's or one in particular?
Reset the SMC http://support.apple.com/kb/HT3964
Reset the PRAM http://support.apple.com/kb/HT1379
Try a cleaning disc. You can get them at places like Radio Shack.
If nothing helps your optical drive has probably failed. You can replace it or purchase an inexpensive external drive. Don't buy the Apple SuperDrive as it won't work with macs that have a built in drive.

IPad 2 3G 64 mic not working from factory, do you have any idea ?

Hi
I have iPad 2 3G 64 , it works prefect but when I use cam for record video there is problem in mic . Mic not working so no sound in video .
I try to use any app from apple store to test mic but still not work also I try to update the device to 4.3.3 when I finish from update again same problem with mic, I used this iPad for one month
I think this problem from hardware not from software .
Please tell me what i have to do with this problem .

Hi
I have iPad 2 3G 64 , it works prefect but when I use cam for record video there is problem in mic . Mic not working so no sound in video .
I try to use any app from apple store to test mic but still not work also I try to update the device to 4.3.3 when I finish from update again same problem with mic, I used this iPad for one month
I think this problem from hardware not from software .
Please tell me what i have to do with this problem .

Ipod mic not working

My Ipod 5th Gen mic not working

- Make sure the mic hole is clear and unobstructed. It is the little hole on the back by the camera lens(if has back camera). For the 16 GB one without the back camera the mic hole is on the top edge near the center.
- Open the Voice Memos app and see if you see movement on the VU meter needle with changes in noise level trying to be recorded
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Built in Mic not working on Imac Windows 7 boot camp

I've been doing research and a lot of people seem to have problems with macbook pros mics not working for vista or XP. My current problem is on an Imac running Windows 7 32bit boot camp. The built in mic REFUSES to work be recognized or show any signs of picking up sounds. It won't work in Sound Recorder, Ventrillo or any program. Any help is appreciated if you need any more info let me know. Yes my mac is fully updated with both windows updates and mac updates.
-Nick.
Edit: I'm running an Imac Version 10.6.6 intel core 2 duo, 2.4GHz

Same Here... is there any solution? i have 64 bit windows 7 and still the same problem.. external mics don't work either!

Iphone4 - MIC not working only on phone call, But in recording MIC works good

My iPhone4 was working last 10 months till last week. it is bought from outside UAE and am Living in UAE
When I make a call , I can hear them clearly , but other side cant hear me.
I think iphone MIC is broken, but fortunately I tried recording for 10 minutes, it is working perfectly. I felt hardware working properly
Then I think it is software Issuebut,
When I detected the issue software version was 4.3.3, And Then I updated software to 4.3.4. Still the issue remains.
I tried several time restarting. No advantage
After all I deleted all my content by resetting from phone and iTunes, bothways.
Now my phone content looks like new iPhone and software is 4.3.4 and
Still the MIC not working only on a phone call
Unbelievable.
I went to more than 3 apple dealers in Dubai, like istore,protech.. All they refused service for iPhone.
They dont have service for iPhone, but they selling and are autherized reseller,
My phone still under warranty.
Do I get warrenty covering, or atleast it is serviced?
Or could you have any trick to get it worked
Trust you can help me.
Thanks in Advance
Nouf, Dubai

I've been having the exact same problem! I tried restoring, updating, suing earphones but NOTHING.

System internal MIC not working in Hp Pavillion dv1000(model: dv1662ea)

Hi, When i connect to internet, internal MIC not working when i go to the voice chatting . Please provide me a solution. My model # is HP Pavilion DV1000 Notebook PC Model: dv1662ea, O/S: WinXP SP2
Thx. .
Vam

i experiencing the same problem.. how did you resolved it?

Beats Audio Control Panel software not working after Windows 10 upgrade.

Beats Audio Control Panel software not working after Windows 10 upgrade. the Beats sound enhancement is useless in WIndows 10. When opening the Windows 10 sound properties I'm getting this box message: Auido enhancement problem Windows has detected the audio enhancement for the following device are causing problems: Speakers / Headphones (IDT High Definition Audio Codec) Woud you like to disable driver enhancement for this device? IDT High Definition Audio CodecBeats Audio Control Panel version6.10.6491.02013.11.2009:43:18 Please provide some kind of fix for this?

Well, it has been a long road on the Win 10 upgrade. At first I got the same error message as above, but after deleting the Dolby Advanced Audio v2 in Win 10 using Control Panel Programs and Features and rebooting, I got into the continual BSOD upon reboot. Here are the steps I took to at least get stable on Windows 10. First, I rolled back to Windows 8.1 using the advanced feature in the BSOD recovery options. Once back in Win 8.1, I deleted the Dolby Advanced Audio v2 using Add/Remove Programs in Control Panel. Then I downloaded the Win 10 update and re-installed it. Once that completed, I updated the Intel Graphics driver under the display adapters (on my G780 it is an Intel HD Graphics 4000, and the driver can be found at https://downloadcenter.intel.com/). Currently I am running version 10.18.10.4252 for my machine. Then, under the Device Manager, I updated the Conexant SmartAudio HD driver under the Sound, video, and game controllers. That driver is currently at 8.66.4.50 and was automatically downloaded from the web when I requested to update driver. I also changed several others settings such as Notify to schedule restart after updates are installed instead of automatic (under Settings --> Update & Security --> Advanced Options) and Do you want Windows to download driver software and realistic icons for your devices? --> No, let me choose what to do, never install driver software from Windows Update. After that, I shut down the machine, waited a moment and booted back up. I have no idea why this helped or if it is overkill, but I am stable and running without a fear of rebooting now. Hope this helps if someone else is having this same issue.

HT6114 my audio midi setup is not working correctly since the install of maverick os

my audio midi setup is not working correctly since the install of maverick os

The upgrade may have reset to default settings ..
Check System Preferences > Sounds > Output
Make sure the correct device is selected and the Mute box is not checked.

Realtek HD Audio: Output:OK, Input (Mic): NOT WORKING??!?!?!?!?!?!?

Hi guys,
I am going to tell you and ask for your advice the wierdest thing happens to my 14-month old Pavilion 6300 series:
- The PC has Realtek HD Audio built-in (on-board) and having the latest driver (I downloaded off from realtek.tw, latest is 5.10.0.5874)
- Before I installed that Realtek driver, I had installed Microsoft UAA Bus driver for HD Audio (version 5.10.0.5010)
- I am running Windows XP Professional SP3
When I plug in a headset (with mic of course, for skype), strange things start like this:
1. I can hear the output sound, the jack can detect which plug I plug in
2. But the INPUT (back or front) which is in my case, the MIC, DOES NOT WORK AT ALL.... Jeeze, it drives me NUT!!!
3. I have turned on ALL the volume related to "MIC" but to no avail. Even the Recording mic volume is grey-out... really no-hope?
4. I did the Hardware test, it could not detect the mic (no movement from the sound bar)
5. The headset works well on other machine!!!!
Can somebody tell me that the onboard card got a problem and I have to buy another card???
Thanks a lot in advance guys, really
James
Message Edited by Jamesnb on 06-26-2009 12:19 PM

now what you can try is can try to test the MotherBoard once and if there is any issue with the onboard card then you have to replace the card.
if there is no issues with the MotherBoard then try entering device manager in safemode and uninstall the drivers once and check if its working.

In-built mic not working after installation of windows 7 on my hp nc8430

So I installed windows 7 on my laptop which originally was running windows xp (hp compaq nc8430) and it turns out that the inbuilt mic is not working and it won't even recognise the SD card that i insert in the card slot. Everything was working perfectly before the installation. I checked the audio devices in control panel and it says the microphone is not plugged in. Also the screen resolution is weird, it won't go above 1024x768, everything is too big for my liking.
Could someone help me out please? Thanks in advance.

Are you using Boot Camp to attempt to install Windows?
https://www.apple.com/support/bootcamp/

EMU 0404 - audio technica ADG1 mic not working

Similar Messages

Maybe you are looking for