EMU 0404 error I-001 installing on windows xp

I previously had it installed and working normally so I no my specs are correct but a few days ago I had to reinstall windows. I updated windows sith SP3 and all the current updates. Then started the process of reinstalling all my hardware and run into a snag with reinstalling patchmix dsp. The audio drivers seem to install fine but I keep getting "Error I-001" error when trying to install Patchmix DSP. I have disabled and removed all other sound cards and even di a virgin re-install with no success. The other error I was getting was "DoInstall failed to launch setup.inx" right after the "Error I-001". If anyone can help it would be greatly appreciated.

Cercos,
To get the install log you need to search for the log file with the error still on the screen.
Sometimes if you close the error the install files will be deleted.
With the I-001 many times the problem is with the extraction so one way to get past this is to use WINzip or 7ZIP to extract the install files first then run the setup manually.
Casey

Similar Messages

Error 0x80070643 when installing DHCP Windows Server 2008 ENTERPRISE SP2 64bit

When I try to install role DHCP on Windows Server 2008 I get the following error:
Attemp to install DHCP Server failed with error code 0x80070643. Fatal error during installation.
Please somebody help me!....
Jorge

Hi Jorge,
I am sorry to hear that.
Here are a few things that I suggest you try:
Grant Full Control for SYSTEM, NETWORK SERVICE and Administrator on C:\Windows\ServiceProfiles\networkservice folder.
If you have Windows Process Activation service installed on the machine, uninstall it.
Open required RPC ports.
More information for you:
Service overview and network port requirements for Windows
http://support.microsoft.com/kb/832017#method7
If the issue still persists, please check the event logs to see if there are any related error messages and troubleshoot accordingly.
Regards,
Amy

Error 2203 when installing on Windows 7

I keep getting multiple error 2203 when attempting to install itunes on my windows 7 laptop. This even occurs when I try uninstalling the postion that did install. I also tried installing as an administrator but the same thing occurs.

It could be done (win7 RC 32b, build 7100):
If you use beta (build 7000), upgrade.
BTW - ACR 5.4 is beta, Win 7 - RC (not beta).
I do not remember any special steps - it went without a hitch (compat. Vista Sp1, run as Admin).
Other way: unzip; go to folder extensions\AdobeCameraRaw5.0All...\Assets, copy&rename file 1003 as Camera Raw.8bi into proper place:
Program Files\Common Files\Adobe\Plug-ins\CS4\File Formats
This two files looks the same.
But no guarantee
Chris

Error in webstart install in windows 2000

When I try to install webstart on my windows 2000 machine I get this error: "Error opening file for writing: C:\Program Files\Java Web Start\javawebstart.dll"
I am installing as administrator also so I don't have a clue why this is happening. Any help would be greatly appreciated. Thanks.

Use the task manager to see if another copy of Java Web Start is running.
Windows will not let you overwrite an open file.
If that dosn't help, try uninstalling the old version of Java Web Start first.

Error trying to install SP1 Windows Server 2008 R2

Hi team,
I'm having an error when I'm trying to deploy service pack 1 of Windows Server 2008 R2. I try this scenario installing the SP1 in a workgroup machine and the results were successful. But when I'm trying to install in my Domain it doesn't work. Later I remove
the machine from the Domain and again try to install the SP1 and it also doesn't work.
What permissions in files or procedures can I implement for having a successful deploy of Service Pack 1 in my Domain?
Thanks a lot for your assistance.
Regards.
David S.

Follow troubleshooting
http://windows.microsoft.com/en-us/windows7/troubleshoot-problems-installing-service-pack
http://windows.microsoft.com/en-us/windows7/windows-7-windows-server-2008-r2-service-pack-1-sp1-installation-error-0x800f0a12
Similar problem has been solved here
http://social.technet.microsoft.com/Forums/windowsserver/en-US/c4ac3279-1b2d-44d2-8e2e-08282f0ba270/cannot-install-sp1-on-windows-2008-r2-64bit-error-0x800f0818?forum=winservergen
http://glazenbakje.wordpress.com/2011/12/01/microsoft-windows-2008-server-r2-unable-to-install-service-pack-1-fix/
Regards
Milos

Admin Console errors in fresh install on Windows 2003 Enterprise.

I have attempted to install 6.1 SP4 on two different Windows 2003 Enterprise boxes. Neither has W2K3 SP1 on them. The installs proceed using a typical install with no errors reported. All defaults were accepted during the install. I can start the server for the Admin and web server instances. I can hit the default page on the web server instance. When I attempt to launch the admin console, I am prompted to logon, as expected. I enter my credentials and promptly get an HTTP 500 error. I check the logs in C:\Sun\WebServer6.1\https-admserv\logs\errors and find the following line:
[26/Apr/2005:12:43:26] failure ( 2596): for host 192.168.175.128 trying to GET /https-admserv/bin/index, cgi_scan_headers reports: HTTP4044: the CGI program C:\Sun\WebServer6.1\bin\https\admin\bin\index.exe did not produce a valid header (program terminated without a valid CGI header. Check for core dump or other abnormal termination)
I searched for others reporting similar problems and the closest I could come to an answer was to make sure cookies were enabled on the brower (they are). I get the same error in IE and Firefox, both locally and remotely. After becoming frustrated with one W2K3 server, I decided to try on another. Exactly the same errors.
Increased loglevels in the server.xml provide no additional logging for this problem. Any pointers to a resolution would be most appreciated as I'm about ready to scrap Sun and move to Apache.
Thanks,
Sean

Yes, there appear to be problems where certain old versions of Netscape and iPlanet products can leave old DLLs lingering in the Windows system32 directory.
I'd check for the following files in the Windows system32 directory (typically C:\WINNT\system32 or C\WINDOWS\system32):
libnspr4.dll
libplc4.dll
libplds4.dll
nss3.dll
nssckbi.dll
smime3.dll
ssl3.dll
nsldap32v50.dll
nsldappr32v50.dll
nsldapssl32v50.dll
If you find any of these files, you can try replacing them with a copy from your Web Server install. Don't forget to backup first.
Please report back what you find!

Error during CF9 install on Windows 2000

We are getting the following error message when attempting to run the installer for CF9:
Microsoft VC++ 2008 Runtime
Installer has determined that Microsoft Visual C++ 2008
Redistributable Package is not installed. Select OK to install now.
To perform your own installation, select CANCEL. After installation
restart the installer to continue.
When I click OK, it looks like the VC++ install happens. I restart the CF9 installer and receive the same message.
I then tried to install the VC++ runtime manually from here:
http://www.microsoft.com/downloads/details.aspx?FamilyID=a5c84275-3b97-4ab7-a40d-3802b2af5 fc2&displaylang=en
That install of VC++ ran with no error, and I can see VC++ in my Add/Remove Programs list. When I attempt to run the CF9 installer, I get the same error message again about VC++ not being installed. I've restart the entire system numerous times with no luck.
I'd really like to install CF9, but can't get the installer to run. Anyone have a solution for me?
This is a fully patched Windows 2000 server.

It looks like their suggested manual install worked. It completed installation and although I haven't fully tested it yet it appears to be running.
Here is how they said to do it manually. It involves creating a "cf.properties" text file and running the installation exe from a command window. Here are their instructions:
The trick is to do a silent install ( ColdFusion_9_WWE_win.exe is the downloaded installer from adobe.com)
C:\>ColdFusion_9_WWE_win.exe -i silent -f cf.properties
Contents of my cf.properties file
INSTALLER_UI=SILENT
SILENT_LICENSE_MODE=full
SILENT_SERIAL_NUMBER=
SILENT_INSTALLER_TYPE=standalone
SILENT_INSTALL_ODBC=true/false
SILENT_INSTALL_VERITY=true/false
SILENT_INSTALL_SAMPLES=true/false
SILENT_INSTALL_JNBRIDGE=true/false
SILENT_INSTALL_FOLDER=C:\\ColdFusion9
SILENT_WEBROOT_FOLDER=C:\\ColdFusion9\\wwwroot
SILENT_ADMIN_PASSWORD=admin
SILENT_FLEX_ENABLED=true
SILENT_ENABLE_RDS=false
DISCLAIMER, this is totally unsupported and any issues that may arise are not supported by adobe.
Good luck!

Error message when installing on Windows 7

I am trying to install the Desktop Software on my new work laptop but it keeps kicking out the destination file. When I go to upzip the download I get: "could not create c:\users\myname\LOCALS~1\Temp - unzip operation cancelled" from the WinZip Self-Extractor.
I have tried turning off my anti-virus as I've had issues installing software before with it on, and am wondering if I try disconnecting from my work LAN while the install loads if this will make a difference.
I'm running Windows 7 Professional SP1 32 bit OS. We don't have onsite IT and of those of us who have BB I'm the only one who is running Win 7; had no problem when it was on my old Win XP! Any help is very much appreciated!
Thanks!

See Troubleshooting issues with iTunes for Windows updates.
tt2

Forte Ensemble + EMU 0404 or Audigy 2

Excuse me but i don't speak English very well!
I have tried Forte Ensemble DEMO with VST PLUGINS!
My DAW machine:
CPU -> P4 HT - 3Ghz - 1MB Cache
RAM -> 4 Gbyte
HD -> 1 HD for WinXP , 2 HD in RAID0 for Sample
Mobo -> ASUS P4C800 E-Deluxe (internal audio is disable)
Audio -> EMU-0404 (1 year ago was Audigy 2)
HypeThrading and ACPI are enabled,and all devices that i don't use
are disabled (serial and parallel port,etc etc).
I use this machine only for Music,and the system is very very optimized!
The EMU ASIO driver use more CPU than Creative ASIO Driver (from Audigy 2)!
I have tried to use in my DAW machine at first only Audigy 2,and when
i use B4 II DEMO VST Plugin i have seen this value:
- VST working -> CPU [10%..14%] Usage (very Good)
- VST standby -> CPU [3%..4%] Usage (very Good)
When i try tu use only EMU 0404 (without Audigy 2 installed on system),
with fresh WinXP and all new driver update, i have obtained this value:
- VST working -> CPU [20%..25%] Usage !
- VST standby -> CPU [17%..19%] Usage !
Why this EMU ASIO driver use more CPU ?
This is not good for me when i use more Plugin.
When i change scene in Forte Ensemble the DAW is very slow to change scene
with EMU but is fast with Audigy2 !
For me there is a very big problem in EMU Driver! Update Please!
1) Is EMU professional or not?
2) Why in the year 2006 i can not to install
2 audio card,EMU 0404 and Audigy2, in the same system ?
3) Why both card share the same DLL,Driver,etc with the same name ?
Read this from brainspawn forum:
http://www.brainspawn.com/forum/view...hlight=proteus

I suppose, the difference in CPU usage you're talking 'bout, is mostly coming from used latency and audio 'resolution' settings.
If you think that the ASIO driver is culprit for CPU usage, simply try w/ Asio4All.
BTW, what are you going to do w/ Forte?
I tried this demo too a while ago and the result were total freezings (W2k). From other alternatives I've tried, energyXT, Plogue Bidule and Hermann Seib's VSTHost runs w/o problems. If you use DX plug-ins too then Acon DM's EffectChainer is good addon for those.
jutapa

Hi, I am getting an error message while installing iTunes store app on my windows 7 laptop stating 'There is a problem with this windoes installer package. A program required for this install to complete could not be run. Contact your package vendor'

Plz assist

Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Windows Installer 4.5 Error while installing in windows 2008 32 bit

In windows 2008 server (standard edition), i am trying to install the exchange server 2007 sp2 before that i need to install the windows installer 4.5 to install my exchange server 2007sp2, while installing the windows installer 4.5 system showing the error
message as " Not enough storage is available to process this commend".
If any one pls give some suggestions as soon as is appreciative.
[email protected]
thanks
Shahul Hameed

Hi,
The error message occurs if you are trying to use a private and undocumented SetupAPI function that isn’t supported in Windows Server 2008. Please
visit the following link for detailed information:
Misleading error message when you install an update package in Windows
Vista or in Windows Server 2008: "Not enough storage is available to process this command"
Please download the right version of Windows Installer 4.5 for Windows Server 2008 x86, you can download it from the following link:
Windows Installer 4.5
Best Regards
Dale
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Adobe Reader 10.1/ 11 get error "has stopped working" on windows 7 after installed 1 or 2 days, but Adobe Reader is fine==

Adobe Reader 10.1/ 11 get error "has stopped working" on windows 7 after installed 1 or 2 days, but Adobe Reader is fine==

Turning off the Protected Mode at Startup setting fixed the problem for me. Switched off all protected mode settings in Preferences exited Adobe Reader XI then restarted. Now I can successfully open files without the program crashing. I run the same versions of Adobe Reader and Norton Internet Security on Windows 7 and Windows 8 systems and the problem only occurred on Windows 7.

HT5639 After installing the windows 7 64 bit, it will restart automatically with error in blue screen. in this case what should i do? i have using bootcamp 5

After installing the windows 7 64 bit, it will restart automatically with error in blue screen. in this case what should i do? i have using bootcamp 5

if it's restarting directly into an error, you can try troubleshooting (might be painful) or re-install windows with boot camp

Error 0xc00000e9 when installing windows 7 on OSX lion

I have a mid 2011 model of macbook pro i7 15 inch , and i just upgraded to OSX lion from os leopard . I tried to install windows 7 via bootcamp 4.0 , and the download for the windows support software always hangs at mid point , and must retry several times before it completes. After which when starting to install windows 7 , at the screen where it says loading windows file , suddenly there is an error of 0xc00000e9 , and i could not continue to install after which , even though i have removed all USB. Is there any way to solve this or do i have to downgrade to bootcamp 3.0 to install the windows 7.
Thanks

No downgrade, what you need to do is head to Bootcamp and delete the Bootcamp partition
Then head to Disk Utility and Erase Free Space with Zero. this will take some time and write zeros' to all your spare space on the drive, it also reads those zeros back to confirm and when it can't do that the driver software will map off the problem sector on your drive.
Once that's finished, use the Bootcamp software again and Windows should install.
You should learn about Carbon Copy Cloner and WinClone so you can restore OS X or Windows
https://discussions.apple.com/docs/DOC-3045
also read this, if your not going to be using Windows heavily or for 3D games, then this might be a better solution that dual booting.
https://discussions.apple.com/docs/DOC-3321
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

Error 0x80070015 when trying to install of windows 8.1 enterprise in My DELL 755

Hi, I am receiving an error 0x80070015 when trying to install of
windows 8.1 enterprise in
My DELL 755
and i get 87% and then get this error
this is my partitions
160GB HDD
C: 28.8 GB "ٍSystem" "I am going to Install in this partition"
D: 30 GB
E: 30 GB
F: 30 GB
G: 30 GB
And i see this question
http://social.technet.microsoft.com/Forums/windows/en-US/a701800d-886e-4509-8abd-0891c2c84064/error-0x80070015-on-clean-install-of-windows-81-enterprise?forum=w8itproinstall
but i don't understand should i delete all my partitions or just only the " C:\ " and "100~200MB" system partition
did he mean delete Only the both " C:\ " and "100~200MB" system partition ?
cause I don't have "100~200MB" system partition just " C:\ "
When i install i just Format the " C:\ " then press
Next
Now should I just select Delete the " C:\ "
partition 0 "System" and recreate the partition again and press
Next
to Continue the installation
Or what i should do ?

OMG
that's not possible i have a lot of Important data in all non-system partitions
i am using Oracle VM VirtualBox "and i free a lot of Space to Test the Iso File"
and i install Windows 8.1 in the VirtualBox
but i see when i try to install Windows 8.1 in the real machine the partition is
"system"
and when i install Windows 8.1 in VirtualBox the partition is
"Unallocated"
it install but it create a
320MB partition "system"
9.8GB partition "primary"
then i choose the primary and the installation complete and i have the Windows 8.1 in VirtualBox Now
Now i don't know should I just select Delete the " C:\ "
partition 0 "System" and recreate the partition again
to make 320MB partition "system" and the rest of the partition to Windows 8.1 "28.8 GB"
Like what happen in the VirtualBox
Or what i should do ?

EMU 0404 error I-001 installing on windows xp

Similar Messages

Maybe you are looking for