Emu 0404... problem with stereo

Hi
I bought an amu 0404 soundcard today and ive got a problem...
i want to use my stereo but i cant figure out how to connect the stero with the soundcard..
i just bought a cable to connect the line in slot from the stereo with the digital line out slot of the card, but its not working ...
ive been using the line in slot with my prior soundcard before so its not broken or anything...
is the the Patchmix DSP maybe ? the program was included to the package and it took my some hours to figure out how to record stuff..
i even can hear the sound through with my headphones..
however.. its not working with my stereo... why ?
is it possible to connect the coaxial out with the line in from my stereo ?
Message Edited by pots on 07-23-2005 04:22 PM

Some of the headset remotes supplied with the N95 contain a small battery that has most likely run out.
The battery is not really designed to be changed by the user so we can't help you with it here. A nokia care point can change the battery for you but you may also want to try a google search for more help.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.
Message Edited by psychomania on 16-Oct-2008 01:34 PM

Similar Messages

EMU 0404 Problems -- need help please

Any help to my current issue would be greatly appreciated.
I recently bought the EMU PCI card on its own.
Im runnin a brand new top of the range pc on windows XP (im new to XP, windows 2000 and a mac user originally - so i may have just missed something)
But on my old windows 2000 machine with the standard on board soundcard, when i went to my sound settings (speaker in the corner) then, Properties > Recording....... i got a list of several options, such as - Line in, Stereo mix, wave out, etc...
In the past i used the stereo mix setting to stream music to potential customers via msn messenger, obviously streaming what my soundcard played.
After installing this soundcard, i now have no stereo mix or anything previous, only WAVE which i cant select or control the volume for, maybe because its on xp?? is there a way to record and stream (via msn) what your soundcard plays using the EMU 0404? i also used this setting to record sounds of the internet etc... Surely im being stupid? with an expensive upgrade to this soundcard from crappy on board? surely?
If so any help would be massivly appreciated...
Thanks in advance

Thank you for you speedy reply mate.
Ive read the link you provided aswell as several other sites and the manual.
For some reason having the emu selected and enabled in the hardware settings instead of the on board soundcard it takes away all the recording settings in windows as i mentioned before.
Simply i can record with this soundcard, i just want to stream what my soundcard plays through msn, also wherever i look the only option for playback and recording i have is E-DSP Wave [Df00]....... ive gone throughout the patchmix, tried near every setting to stream what my soundcard plays.. im lost
cheers

4.1 update - problems with stereo connectivity

I have a high end audio system in my car... Focals, w7, etc etc. It is ran by a avhp3100dvd. Since I updated my iphone4 to the new 4.1 OS, I get random static through the audio system. It is sporadic, lasts 3 to 4 seconds, goes away, and then comes back. It worked earlier today before I did the update. My itouch works fine, so I know it isn't the radio. I restored the iphone4 AGAIN (a clean restore btw, so I just spent an extra hour organizing my iphone again) just to see if the upgrade was corrupted somehow. I still have the same issue. The phone plays like normal with headphones, it is just when the iphone is synced to the radio.
I have seen numerous complaints about the new OS not being compatible with radios after updates. I was very hesitant to purchase the iphone4 because of this, but I tested it before I bought it, and everything worked with 4.0. That is the ONLY reason I purchased the iphone4. I felt like apple forced 3g customers to upgrade after the 4 update made them unusable. 3g phones need to be fixed with the new operating system and PLEASE FIX connection problems with other devices.
It doesn't make sense why an update would mess up connection capabilities with other devices (isn't that a step backward?). The reason why I have purchased apple devices (iphones, macbook, itouch, ipad) is because they typically just work. That hasn't been the case lately. Thanks for reading my rant

Thanks for the rant but it's probably better to contact Apple about this. We don't work for them.
Regards

Problems with stereo image

The stereo image of the files playing in itunes is not 100% accurate, is there a way to fix this issue (i.e. third party plug in or so)??
Here's my problem: first of all I'm a musician/producer with pro equipment and I'm trying to copy a few sequences into the ipod. That means that I only need to hear one side of the stereo file, as the other side is the click going into the drummer's headphone. However, if I play the track outside of itunes it sounds fine, if I open it with itunes to copy it into the ipod I hear the L side (click) bleeding into the R side (sequence).
How can this be fixed?
Thanks and sorry for the long post.

You're right, I didnt even know there was such a thing in the preferences. Anyways, now it's working on itunes, but when I copy the tracks to the ipod I still get the same problem. Does the ipod have the sound enhancer too?? Where do I turn it off?
Thanks

Problems with stereo audio tracks

I'm recording from an external synthesizer, and it sounds really weak when I record in mono. So I switch over to stereo, where I record on Audio 1 on the track list (as it now represents the left side, while Audio 2 on the track list represents the right).
After recording, I copy the recorded region onto Audio 2 to create the stereo effect (i.e. Audio 1 = left side, Audio 2 = right side). Audio 2 is controlled by stereo object "Track 1-2," which is set in Audio 1 (where I originally recorded the external sound).
But...
My problem is I'm not hearing any sound on the right side, or at all when I copy and paste the recorded region from Audio 1 to Audio 2. I don't know what I'm doing wrong or if I have to set the parameters so that Audio 2 actually plays the right side of my "Track 1-2" stereo set-up from Audio 1.
Thanks for any help!

1: if something is stereo record it as stereo and if mono record as mono
2: recording mono and changing it to stereo won't make sense because its the same channel on two sides it'll still sound mono
3: recording stereo then switching the channel to mono is not a good idea because if the the both sides are phase then it'll sound weird because you'll only get the both soft sides in the centre or both loud sides in the centre
I'll rather use direct mixer plug-in for this type of job or I'll force split the stereo file then put them on two separate tracks then centre the pan on both tracks
my English is not that good but i hope you got what i mean
or get a cable which is 1 stereo 6.5 jack to two RCA left and right or two Mono 6.5 Jacks left and right
this way headphone out from the external gear to two channels (unbalanced) in your interface to logic
then select which input they are then hit record
doing this way will make sure anything you hear in headphone is what ever you'll record
stash

Problem with STEREO track

hi everyone.
this is a really dumn question since i used to do this all the time is Sonar.
i recorded some vocals and it only recorded in one channel. i could always hit the infinity button to make it mono so i can hear it on both speakers. however, isn't there some effect i can add to get sound on both channels and keep it the stereo track? i'm using the tascam us-122 as an interface and for some reason it only allows you to record on either the L or R. not both of them at the same time. any ideas?

Next time record the mic on two seperate tracks and set the track delay to taste on one of the tracks. Or -quick fix, copy the region to another audio track and set the track delay as above. Use pitch changer to drop or raise the pitch one cent or two (keep it subtle or it will ruin the vocal track). Next ime, you could also use two mics, one a condenser for direct (or ribbon or tube) and a dynamic pointed slightly off center (just becareful to watch for phase issues) small dead rooms work best because they minimize reflections and capture the "dry sound" More track delay can always be added to spread the stereo effect. I find that the spreader plug-ins are good for instruments but deadly to vocals. Your lead vocals have to be kept pure unless you are distorting on purpose. Megabucks are spent on mics and vocal processors by the larger studios for just this purpose. Two or three mics are always better than artificial effects. Try using your best mic in the usual place and set two ambient mics panned hard L/R - watch the phase and enjoy

Drivers EMU 0404 UB

Hello,
I have constant problems running EMU 0404 USB with various programs such as Cubase or Battery 3. I tried it on Windows Vista and XP as well. XP acts better, but still there are problems with audio (sound often goes crazy or EMU just hangs whole system. What do I have to do to run it properly on Vista or XP, on the page there is no place to find current drivers. Where I can find latest drivers for EMU 0404 USB Vista 32??
Please help,
Slawek

Hi,
I suggest you take this up with support. If you are seeing the end of service life message, please choose a different product. That should bring you to an email form to contact support.

Emu 0404 USB Constantly Set to Mute By Volume Control

I had my emu 0404 running with my onboard sound for a short while (because the 0404 would not work with voice chat software such as ventrillo).
I have since disabled the onboard sound and uninstalled the driver, but now upon every reboot of my system the sndvolume32.exe (aka Volume Control icon on the taskbar) will set the Wave component of the emu 0404 to mute. I'd rather not have to open up volume control everytime i reboot to unmute my sound. I have tried going through my registry and deleting any remaining trace of the onboard sound (RealTek HD Audio) but no good. I have even uninstalled and reinstalled the emu 0404 drivers many times, still no good. I'm also using XP 64-bit, but i don't know if that matters.
Can anyone tell me how I can stop volume control from setting the Wav output to mute upon rebooting?
Message Edited by infinitydose on 05-02-2008 06:22 PM
Message Edited by infinitydose on 05-02-2008 06:23 PM

Have you set the S/PDIF mode switch to coax and how 'bout monitoring settings? I've read some issues w/ those switches too (you may need to toggle On/Off couple of times to get switch working properly). There is also thei Unofficial E-MU Forum you can check/ask advicing - http://www.productionforums.com/index.php?f=52
jutapa

Problem with Emu 0404 soundcard

Hi!
I want to connect my E-MU 0404 soundcard, with my Macbook pro 2011. The problem which appear is that the computer not syncs with my soundcard, and when i´m trying to record, the computer starts to record from the computer microphone. Do anybody know what i am supposed to do to make this thing work?
Regards from Sweden

Bellmanss wrote:
i´m trying to record, the computer starts to record from the computer microphone.
first make sure you've installed the latest driver for the interface, then:
http://www.bulletsandbones.com/GB/GBFAQ.html#selectinterface
(Let the page FULLY load. The link to your answer is at the top of your screen)

EMU 0404 PCI and XP64 Bit, strange problem

Hi,
I have Windows XP 64 Bit and the EMU 0404 PCI soundcard. I'm experiencing a problem whereby sound works on the computer upon startup for approximately 30 minutes to 2 hours and then stops working and starts randomly playing sound from the left or right.
I have tried so many things, i have installed, uninstalled, reinstalled the corresponding drivers but to no success. I have tried putting the soundcard in a different slow but still to no success.
I really do hope someone can help me out with this frustrating problem

Had the exact same problem on my 1820M in XP x64. See this thread for the workaround:
http://forums.creative.com/creativel...thread.id=3186

Any ideas on problem with ipod and alpine cde-9881 car stereo

I have an ipod 60gb v 1.2.1 and a new Alpine car stereo with Ipod connecting cable. When connected, the stereo message reads IPod searching. It never assumes control of ipod,or quits searching. I have reset and restored my ipod, had the apple geek at genius bar check it out. My ipod does not play on the alpine ipod ready stereo in my husband's car, nor the stereos in Car Toys. My husband's 30 gb ipod plays on the stereo in his car AND my car. Help! Anyone have any ideas on how to fix this problem? Alpine is telling me it could be a software problem with my ipod, and to revert to an earlier version of itunes. But my husband's ipod works in my car. So I did a restore using his computer and itunes....no luck. am interested in any ideas on a possible solution!!
Thanks in advance
md

Have you had a chance to look at this troubleshooting page? If not, have a look at the bottom section that covers what to try if the message keeps reappearing: iTunes has detected an iPod in recovery mode - Use iTunes to restore
Towards the end it says "If after restoring your iPod, the message described above reappears, the iPod drive letter may need to be reassigned. See the "Change the Drive Letter" section of this document for steps to assign a different drive letter" which contains a link to this article: Windows confuses iPod with network drive and iTunes may exhibit strange behavior in relation to the iPod.

Stereo Out Problem with Macbook Aluminium(Late 2008) Debian OS

Hello. I'm using my Macbook Aluminium(Late 2008) with 2 operation systems: Snow Leopard(10.6.8) & Debian Squeeze (6.0.4). I've no problem with OsX side, works fast & great. But I've got a interesting problem with Linux side. Everything works but Stereo Speaker. I realized that my macbook uses only one output(right speaker works, left doesn't), so I can't listen stereo music on Linux side. Debian uses ALSA Audio aoutomaticly. I've already asked Debian forums but noone able to solve my problem, so I decided to ask here with my last hope.
What I tried:
1- used ''speaker-test -c 2'' terminal code & I've seen this message
speaker-test 1.0.23
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 2048 to 8192
Period size range from 1024 to 1024
Using max buffer size 8192
Periods = 4
was set period_size = 1024
was set buffer_size = 8192
0 - Front Left
1 - Front Right
Time per period = 5.823448
2- Checked Debian's Audio Settings, everything seems normal.
3- Installed Pulse Audio, but it used Alsa base so nothing chanced. In Pulse Volume Control Panel, I saw I've got only Mono Output. But I there is no section for change to stereo.
4- Uninstalled ALSA & installed OSS4 but OSS4 simply doesn't work. So turned back to ALSA.
5- My stereo works only with headphone on Debian.

Hello. I'm using my Macbook Aluminium(Late 2008) with 2 operation systems: Snow Leopard(10.6.8) & Debian Squeeze (6.0.4). I've no problem with OsX side, works fast & great. But I've got a interesting problem with Linux side. Everything works but Stereo Speaker. I realized that my macbook uses only one output(right speaker works, left doesn't), so I can't listen stereo music on Linux side. Debian uses ALSA Audio aoutomaticly. I've already asked Debian forums but noone able to solve my problem, so I decided to ask here with my last hope.
What I tried:
1- used ''speaker-test -c 2'' terminal code & I've seen this message
speaker-test 1.0.23
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 2048 to 8192
Period size range from 1024 to 1024
Using max buffer size 8192
Periods = 4
was set period_size = 1024
was set buffer_size = 8192
0 - Front Left
1 - Front Right
Time per period = 5.823448
2- Checked Debian's Audio Settings, everything seems normal.
3- Installed Pulse Audio, but it used Alsa base so nothing chanced. In Pulse Volume Control Panel, I saw I've got only Mono Output. But I there is no section for change to stereo.
4- Uninstalled ALSA & installed OSS4 but OSS4 simply doesn't work. So turned back to ALSA.
5- My stereo works only with headphone on Debian.

There is a problem with the left headphone or stereo headphone jack connection in the ipod touch 2nd generation

I have had my ipod touch 2nd generation for 3 yrs. Now its been a year with this problem but i never seem to get it fixed because i lost my warranty and repair certificate a year ago. So the problem is whenever I put in a headphone jack for some reason only the right head phone or right speaker works not the left, but when i place the ipod on the docking port both speakers on my stereo work.
Now I have taken great care of this thing. Never lost it. I assume that a connection inside the jack port is pushed in from debrie (forgot how to spell that word) because, I always place my ipod into my pocket. The only way to get the left speaker or headphone to work is to push on the headphone jack so it tilts, then the left speaker works; but when i release it the left speaker or headphone turns off or stop making sound. So i know its not wiring problems its the connection for the headphone jack to the ipods jack's connection for the left speaker. Though microphones work.
My question is can this be a DIY or do i have to take it in to a local apple store. Problem i lost the warranty and protection repair form or license 2 years ago. I have had no problems with my ipod at all these years until this problem has consisted to happen since last year.
Anything?
Thanks,
Sigma119

- If you want to replace the headphone jack yourself see:
iPod Touch Repair - iFixit
- Apple will only exchange your iPod for a refurbished one for this price, You get a new battery. However, it may not be worth it for a 2G iPod.
Apple - Support - iPod - Repair pricing- A third-party place like this one is less expensive. Google from more places.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Samsung Fascinate, problems with playing music via USB port on car stereo

Before the update, I could play the music files on my Fascinate via the USB port on my Kenwood stereo, and control basic functions such as skip, pause etc. Now, my stereo does not recognize the device, and cannot read the files. I went to local Verizon store where a sales rep tried to connect it in here new Kia Soul and it didn't recognize the device either. It will play via the AUX jack, but I lose player control and the phone does not charge via the AUX cable. She did a hard reset which did not resolve the problem. We tried one of the other employee's Fascinate in my car, which did not work either.
So, after hoping to be able to stream music via Pandora, Jango etc thru the USB port after the update, now it seems its primary function is for charging.
Also, the ALL SHARE function, which I used to get the music on my phone originally, does not work now.
Anyone else have this issue with music player and USB connection?

txgopher- I have personally never used my Fascinate to listen to music via USB via stereo however, I can see why it would be frustrating for you to no longer be able to do so when it was never an issue prior to the update.
It sounds as though you and the store rep already did some troubleshooting by trying to duplicate the problem with another car, stereo and even doing the final troubleshooting step which is a master reset.
Since you have done all of the necessary troubleshooting steps to no avail, it most definitely appears as though the software update has interfered with that USB connection in some way.
What I have done is forwarded the information you have provided to Samsung in order for them to look into this concern as well as come up with a way to get this resolved.
Please stay tuned because as soon as we hear back from Samsung we will be sure to update this forum with the results/findings.

Audition problems with ASI5211 analog pair & AES stereo in at same time ...

That is, the Audio Science ASI5211 card is advertised as essentially a 4 mono channel input card, 2 of which are analog and 2 are digital. However, I haven't been able to get Audition (CS5.5 or CS6) to recognize this capability. The ASIO/MME/WDM driver sets supplied by Audio Science (so far, versions 4.10.7 through 4.10.20) and its associated desktop driver control panel seem to show this ability as 2 separate stereo audio streams that can be set to pass either of the physical stereo input sources (Analog & AES). I select one stream as analog and the other as AES, but I can't seem to map these streams/inputs discretely inside Audition in the "Multitrack" view to 4 different channels.
If I use the ASIO driver class in Audition, I'm only shown a single "Default Input" stream (# 1) and can select among either the left or right physical input to map to the left or right stereo Audition channel. This appears to be the limit of my choices in the "Multitrack" input select view as well.
If I use the MME (WDM) driver class, I can select between the 2 streams (#1 and #2) as "Default Input" but again, whichever "stream" is selected, that's the only choice I get in the "Multitrack" input select view ...
I also have another instance of Audition that is running on a pair of ASI5644 cards (4 stereo record streams per card) and the ASIO driver class, that I don't seem to have this kind of problem with.
The Audio Science drivers are a "monlithic" kinda deal in that the one package is intended for most (if not all) of their product.
Any ideas?
Dell Optiplex 780
WIN7 64bit Enterprise
Audio Science ASI5211
I hope this is at least somewhat clear.
Thanks in advance for your time and attention.
-Tim

tgmartin wrote:
Steve,
Thanks for the response. I was able to get an answer about this from Audio Science and it appears that, like a number of things, this capability of deriving 4 discrete "mono" channels (2 Analog + 2 AES) from the ASI5211 card *WAS* possible in Audition v3 using Windows drivers, but it was amputated from subsequent versions of Audition.
What I was told was that the absence of this ability, using the current ASIO driver, is somehow due to the hardware architecture of the card. Not much more was revealed.
Nothing at all was removed from Audition's ability to pick up and send correctly formatted ASIO streams - otherwise just about every other user would have screamed from the rooftops, and it would have easily been picked up in beta testing.
Reading between the lines, I'd say that they were being 'economical' with the truth here. What it amounts to is that they've screwed up their ASIO driver - period.

Emu 0404... problem with stereo

Similar Messages

Maybe you are looking for