EMU 1820m install problem please help me I'm going crazy

I've brought the EMU 1820m two days ago and for two days now I've been looking everywhere for an answer.
So I plugged the card in the computer, I turn the power on and... Windows doesn't detect the card. I look on the net and apparently it's because I have to delete the previous sound card in the bios and desinstall them. OK. I do it.
I reboot again and again and windows still doen't recognize it. Nothing. It's plugged but windows doesn't see anything.I look on the net for various solutions: trying a different PCI slot, changing where it's plugged to the power supply, nothing...
I was so excited to buy this card and now the disappointment is even greater...... Can anybody help me???

Windows doesn't detect anything... It's not listed in the device manager... I will try to find another computer to see if it works...
By the way, the power supply cable has three plugs, one for the card, one for the power supply and one for the hard drive (if you don't have any cable left on the power supply)... Where do I plug it on the hard drive? I'm trying everything, I'm desesperate....

Similar Messages

Can't get passed this install problem - Please help Adobe.

I've downloaded the TRIAL version of PRODUCTION PREMIUM CS6. Once running / installed and tested it I will purchase it.
But cannot get past this ERROR problem.
Here is my install ERROR log ADOBE.. Please help.
URGENT.
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DF027, DW063 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 0 warning(s)
----------- Payload: {9124DF4E-617D-486B-A970-8FA632244F24} Adobe Photoshop CS6 Core 13.0.0.0 -----------
ERROR: DF027: Unable to copy file from "/private/tmp/.tempdir6Qpuljrb/Assets1/Application/Adobe Photoshop CS6.app/Contents/Resources/PS_LevelsIcon.icns" to "/Applications/Adobe Photoshop CS6/Adobe Photoshop CS6.app/Contents/Resources/PS_LevelsIcon.icns" (Seq 1205)
ERROR: DW063: Command ARKCopyFileCommand failed.(Seq 1205)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Photoshop CS6 English Language Pack_AdobePhotoshop13-en_US: Install failed
ERROR: DW050: - Adobe Photoshop CS6 Core: Failed due to Language Pack installation failure

You can try resolving your issue using following document :
http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html
and
http://helpx.adobe.com/creative-suite/kb/error-unable-copy-file-tmp.html
Regards,
Sharath Holla.

Very Strange Logic Studio Installing Problem, please help !

Hello .
I wanted to install Logic Studio 9 on a brand new imac and somehow installation was failed .
Than i erased what ever i could which was left from the failed installation .
And now i am trying to reinstall, but this time Installation is not asking me Audio Content 1, 2 and 3
And also after Jam Pack 1, instead of continuing to 2 and 3, is asking to put install disk , and after that point installation getting failed again .
So far what i erased after failure was (only the ones i could find out of this list )
Application Files
/Applications/Compressor
/Applications/Logic Node
/Applications/Logic Pro
/Applications/MainStage
/Applications/Soundtrack Pro
/Applications/WaveBurner
/Applications/Utilities/Apple Loops Utility
/Applications/Utilities/Impulse Response Utility
Factory Settings, Instruments
/Library/Application Support/Logic/
/Library/Application Support/Garageband/
/Library/Application Support/Garageband Content/ (Legacy)
/Library/Application Support/Soundtrack Pro/
/Library/Application Support/WaveBurner/
Impulse Responses
/Library/Audio/Impulse Responses/
Receipts
Receipts can vary quite a bit depending on your system. Try to find all those that look like the following:
/Library/Receipts/AudioContentforSoundtrackProXX.pkg
/Library/Receipts/CompressorXX.pkg
/Library/Receipts/EXS24SamplerLibrarySamples.pkg
/Library/Receipts/EXS24SamplerLibraryStudio.pkg
/Library/Receipts/GarageBandXX.pkg
/Library/Receipts/ImpulseData.pkg
/Library/Receipts/ImpulseResponseUtility.pkg
/Library/Receipts/JamPackXX.pkg
/Library/Receipts/LogicXX.pkg
/Library/Receipts/MainStageXX.pkg
/Library/Receipts/RemixToolsXX.pkg
/Library/Receipts/RhythmSectionXX.pkg
/Library/Receipts/SharedLogicStudioHelpFiles.pkg
/Library/Receipts/SoundtrackProXX.pkg
/Library/Receipts/UltrabeatXX.pkg
/Library/Receipts/WaveburnerXX.pkg
User Preferences:
~/Library/Preferences/com.apple.logic.pro.plist
~/Library/Preferences/com.apple.logic.pro.cs
~/Library/Preferences/Logic/ (Legacy preferences)
License
/Library/Application Support/ProApps/Logic Studio System ID
Apple Loops
/Library/Audio/Apple Loops/Apple/Apple Loops for GarageBand/
/Library/Audio/Apple Loops/Apple/Apple Loops for Soundtrack Pro/
/Library/Audio/Apple Loops/Apple/iLife Sound Effects/
/Library/Audio/Apple Loops/Apple/Jam Pack 1/
/Library/Audio/Apple Loops/Apple/Jam Pack Remix Tools/
/Library/Audio/Apple Loops/Apple/Jam Pack Rhythm Section/
/Library/Audio/Apple Loops/Apple/Jam Pack Symphony Orchestra/
/Library/Audio/Apple Loops/Apple/Jam Pack World Music/
/Library/Audio/Apple Loops Index/
But what ever i tried, gives no solution . At the end a fail .
How can i wipe out all the Logic existence from my computer to make new install ?
Or, what is this problem i am having? As installation is not asking some discs which is necessary for the setup anymore .
Did anyone experienced that ?
I will be very happy if someone can assist on me this . Since 5 hours i am trying to setup this thing .
Thanks a lot

it is very frustrating to see such an installation problem happening from a "professional" called DAW .
I am actually a Protools user , and i have never had this type of complications .
I mean come on, i am just trying to install the thing .
On a new system, on a new computer and from an original purchase .
I believe i have enough computer knowledge to instal a simple software .
But i am spending almost 10 hours since yesterday to install Logic .
Instead of making designer boxes or giving fancy advertisements, i am inviting Apple Engineers to create proper working software .
Especially to see a professional audio software like Logic in this epic fall, is very very bad .
I mean you can say i am problematic and don't know how to instal a simple software, but than please write to google, Logic installation problems , and you will see thousands of issues .
Whatever i am writing here not against to the people who are replying and want to help , i just want Apple to read this .
Ah , i am sure Apple won't put attention on it , but doesn't matter .
You just lost 1 customer for Logic
I am erasing this thing now from my computer and continue with Protools as the way i was doing .
Sorry if i am bitter, but this is not acceptable .
Message was edited by: timbre2010

TIGER/POWERBOOK 12" G4 - erase and install problems. please help..

Hello,
I have a powerbook g4 (the last of the powerbook 12"/ 80gb/1.5ghz to be released) with tiger installed.
I have had a a crash x 2 when doing software updates. So I managed to get it going, to then back up to an external drive - to do an erase and install.
Once I went to do the erase and install it failed, so I tried again and it seems to have done the erase. now my actual HD isn't visible as the select detination to install?
So, I can't actually even attempt to install with no destination.
any help would be most appreciated.
thankyou

suzannah-a:
Unfortunately, it seems as if your HDD has failed. Try booting from the install disk, the go to the Utilities menu and launch Disk Utility. If the HDD shows up in the sidebar, you should reformat it. (Directions below). If it does not show up, you need to replace the HDD. Post back for a list of available HDDs and vendors, step by step directions and additional tips.
If your HDD shows up follow these directions to reformat and erase:
Formatting, Partitioning Erasing a Hard Disk Drive
Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
Boot from the install CD holding down the "C" key.
Select language
• Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel. (You are about to create a single partition volume.)
• Click on Options button
• Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)
• Click OK
• Select number of partition in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Quit Disk Utility.
If you are able to do the reformat and erase, you can then proceed to restore from your backup, or to install the OS from disk.
Please do post back with an update on how it goes, and with further questions or comments, if any.
cornelius

Z97M Gaming windows 7 installing problem, please help

hi everyone. I hope someone could help me. This is my setup I just built:
MSI Z97M Gaming (latest bios updated, v1.4)
Intel Core I5 4690S Cpu
2 sticks of Gskill DDR3 (2x4GB) 2400Mhz
Nvidia 970GTX 4GB PCIE video card
Samsung EVO 840 - 250GB SSD (latest firmware updated)
Corsair 750W PSU
And this is the problem: when i boot (from USB) Windows 7 SP1 setup, it runs fine until it asks me for a driver (which is missing) in order to proceed with installation. I suppose it's SATA driver, so I've copied last version of Asmedia SATA driver in my usb key. But when i point to it, windows setup says that no driver has been found! So it doesn't show the ssd and I can't proceed with setup. I've tried every subfolder of the "asmedia_sata_win78" main folder.
Also, I set LEGACY+UEFI mode in bios. I've also tried IDE mode for the sata controller, but nothing works
Any suggestion, please? Sorry for the bad english

do you have any other storage to try say standard HDD? to try it instead this SSD
Quote
Still, I boot from usb drive, still I point to intel 32bit storage drivers, still windows shows "Intel 9 chipset series SATA AHCI controller". But it doesn't find the hard disk
i suspect something isn't ok with your installation disk
since its unclear is it 32bit or 64bit and since accept 32bit drivers only
can you use a better one? and to make sure that it would have SP1 integrated

ITunes 9.2 + install problems please help.

hi guys i recently bought a new laptop and when i try to install itunes 9.2 or higher it shows an error.
error writing to file: C:\program files (x86)\commonfiles\apple\mobile device support\ssleay32.dll. verify that you have access to that directory.
i really need itunes because i recently bought an ipod touch and i cant sync it to get any songs
any help is greatly appreciated.
thanks

error writing to file: C:\program files (x86)\commonfiles\apple\mobile device support\ssleay32.dll. verify that you have access to that directory.
That's consistent with disk/file damage, tame.
Let's try running a disk check over your C drive. There's Windows 7 instructions in the following document. Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors.
[How to use CHKDSK (Check Disk)|http://www.w7forums.com/use-chkdsk-check-disk-t448.html]
Does the disk check find/repair any damage? If so, try another iTunes install. Does the install go through without the error this time?

!!instaling problem please help!!

hey i was trying to install starcraft on my macbook, it said that "you cannot open the application starcraft installer because it is not supported on this system. i want to know how to be able to install it, like what i have to do to fix it.
please reply with suggestions. thank you in advance

The System Requirements are PPC Looks like it may not install on Intel.
You could install Windows 98. I wouldn't but you could.
-mj
[email protected]

8.1.6 and designer 6i post install problem - please help

Hello all,
I installed designer following the install guide extremely closely. The install went off without a hitch. However, when I try to create and ERD, or any diagram, I receive this error:
Message
ORA-01400: cannot insert NULL into ("REPOS_OWNER"."I$SDD_DIAGRAM_SEGMENTS"."IRID")
Message
ORA-01400: cannot insert NULL into ("REPOS_OWNER"."I$SDD_DIAGRAM_SEGMENTS"."IRID")
Message
RME-02124: Failed to execute SQL statement: insert into I$SDD_DIAGRAM_SEGMENTS (DIAGRAM_REF, SEQUENCE, GRAPHICAL_DATA, PARENT_IVID, PAC_REF) values (:diag_id, :seq, :data, :diag_ivid, :diag_id)
I'm fairly new to Oracle but I did have designer 6.0 working on 8.1.5.
Does anyone have any suggestions?
Thanks,
Damon

The same happened to me. It turns out that it had something to do with old windows registry entries that let the repository install program know that I had designer 6.0 previously installed on my system. The install apparently isn't wise enough to know that it is installing 6i. It checks the registry for the first Designer version identified and decides what repository components you need based on that. 6i uses the standard repository components (6.0 versions) and some new stuff.
If you read your install documentation carefully (Chapter 2, Step 14, Item 2), you will note that you need to select two components to install. If the repository
admin utility is <prior-version-aware> it neglect to even display one of those options and its easy to blow right past that screen without realizing something is amiss (that's what I did ;-P ).
Hope this gets you going,
As with any Oracle product install
-- Good Luck!! --
Sandi
null

Please help guys, i'm going crazy!

Hello everyone, i hope someone out there can help me cos i'm tearing my hair out!
Ok, so i've had my 80gb video ipod for less than a month and a few days ago when i went to update it, it said there was a corrupted file and i may have to restore it. which i did. Then, when it was loading back up again, the hold function on the ipod seems to have stopped working. The furthest i've got is the screen shows a list of languages to choose from, 'English' being at the top, but i can't select any because the hold function won't turn off!!!
I doubt that i've broken it in any way, i'm really careful with it
Any takers?! I would love someone forever if they knew the answer to this riddle!
Ross
Packard Bell Windows XP

David, thanks for setting that up! It's just kills me why Apple wont just give us the ability to go fullscreen and make it easy for us!
Your samples did work on the Mac, but completely bombed on the PC in IE and Firefox. I visited the apple site and found some QT movies that opened the QT player and went fullscreen, but they didn't always work on the PC. The problem with using the QT player outside of the HTML is I have several clips so I need some sort of navigation. Also, the fact that launching the player doesn't always work for everyone is a bigger problem for me.
I was originally using JW Flash Player and it was wonderful, but the CPU usage was HUGE when compared to QT. My movies are 960/540 and around 80 megs, it was using 120-150% of my CPU (each core is 100%). Fullscreen was great with FLASH, but the movies didn't play for users that had older hardware (1 cpu)
Any ideas on how I can still work with QT, can I pay someone money? LOL.

TS4436 Iphone 4 camera worked fine for 2 years then turned all flash photos red after installed Fast Torchlight App - deletion of app did not fix camera problem - please help?

Iphone 4 camera worked fine for 2 years then all photos with flash came out as red after installed Fast Torchlight App - deletion of app did not fix camera problem - please help?

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414

[TV@Master] Problem please help

I have Msi.mother board PT8-Neo -LSR , Model No.Ms-6799 , main board bios -Phonenix ,maind board version i updat it to 2.2 , cpu size 2.4 G celleron D/256/533 , memory size 256DDram (400),display card Nvidia Riva TNT2 model 64
the problem that i face it when i put my TV@nywhere -master card ,the pc stop at the main page that show the biso version and name of bios company and the letters do not bost well it look like a virus work , and when i take tha card off the pc go normally , i tried put it to other PCI the same problem
please help

i meany by fix the problem of getting the pc go on to windows with card on PCI salot but i still have the broblem of the driver
please read my reply again
my operating system is win me and i have also another pc have XP
when i log in to windows the system show that found my TV@nywhere card but it didnt took the installatin driver for it i tried to install the driver directly
but it give me this 2 mesages when i try to install the driver
MSI TV card is not found ,stop the installation
the other message is
MSI pvs driver installatin failed
i download the driver from msi page also give me the same messages
for known on Device Manager it show me that the driver there but do not have the driver and the ? mark beside them
what to do now

My iphone 4 is acting like crap right i can't even restore it everytime i try to reboot it my iphone freezes at the apple logo it is ******* to the point where i just want to smash it how do i solve this problem please help?

my iphone 4 is acting like crap right i can't even restore it everytime i try to reboot it my iphone freezes at the apple logo it is ******* me off to the point where i just want to smash it how do i solve this problem please help?

Don't worry, just follow these steps to fix iPhone stuck on Apple logo
=> First of all Start your Computer and then connect with Internet connection, now Download the latest version of the iTunes application
=> Now install the iTunes application in your System and connect your Device with computer via Data cable
=> Now connect your Device with iTunes application and then Tab on summary option, see in the left side bar of iTunes
=> Now Select restore option from iTunes and then confirm the Restore Message for better results. After this unplug your Device and Restart it
I hope that will surely
Thank you...

PC crashed. CD-Rom not working. Downloaded CS5 Web Premium but not able to install. Please Help. Help.

PC crashed. CD-Rom not working. Downloaded CS5 Web Premium but not able to install. Please Help. Help.

I had problem with my CD-rom, it not able to open. On top of that recently my PC crashed.
I managed to install other software, but not able to install CS5 Web Premium.
Ive downloaded the electronic version via Adobe Downloads, but not able install it.

X-Fi Fatal1ty Plat1num Champion Ed. problem, please help!

9X-Fi Fatalty Platnum Champion Ed. problem, please help!? Hi there everyone,
So i have a X-Fi Fatalty Platnum Champion Ed. and a computer with Windows 7.
I've searched the web and i found many people saying that the card it's working and perfectly compatible so i would like to exclude this option as far as the problems that i'm having.
So, right out of the box i've placed the front panel in with the ribbon cable and the power connected to it, then i connected the other end of the ribbon cable and finally placed the card in one of the PCI slots i have free.
Now, when i start my PC, i don't hear any particolar "beep messages" but nothing will come on the screen, in few words my PC will not boot at all. I can hear the HDD spinning, everything sounds normal except for that "little" problem.
So, i re-did all the connections thinking that maybe i did something wrong, but following the instruction i did exactly as told. So i tried again to power up the computer and i've noticed that the X-Fi logo is lit up (red light) and.. I don't really know if that means something or it's just something aside that doesn't really matter.. But, what is it's The PCI card is broken or there's something else?
I did try to disable the sound card (integrated mobo sound) from the BIOS but that didn't change anything. I did try all the software options but this looks like more of an hardware problem (please correct me if i'm wrong and/or i've missed something).
There's something that popped up in my mind.. the PSU. I noticed that i have a 300W PSU (mm.. low, isn't it's)?and i was wondering if that's enough or i need a more powerful one.. and if that's may be the case for the PCI to not work at all causing all i've already explained above. I mean.. It seems like i've installed a dead peripheral and that's impeding the computer to start up..
I don't know.. I need clarification and help, PLEASE.
Thank you very much in advance!

Look at the beta thread sticked above but good luck waiting for a new driver. That beta driver has been there since January and although better than the normal driver it is still crap.
All the boot type issues are with the SSD but if you getting in game crashes etc... under windows 8 that is simply that the driver stinks.

Oracle Designer Problem Please help me

Sir,
1) I created a database
2) Run>cd d:\Oracle_home\repadm61\admin\@ckqa
@ckparams.txt
@ ckvalqa
@ ckcreate
3)Opened Repository Administration Utility
Log in as 'repos_manager/repos_manager@orcltest'
Installed Repository.
4) Opened Oracle 9i Designer. I am able to connect
as 'repos_manager/repos_manager@orcltest'
But I am not able to logon as any other user in same database/ any other user in different database. Why?
Please help me.
regards
Mathew

duplicate thread, see this one -> Re: Oracle Designer Problem Please help me

EMU 1820m install problem please help me I'm going crazy

Similar Messages

Maybe you are looking for