Emulate Fault message in BPM

Hello
I have read all related topics
fault message in BPM process
Alert monitoring and fault message types
Using Fault Message Type in BPM
but no answer..
I have synch BPM that send synch request to RFC and a mapping step. Then I have to catch exception (of send step or mapping) and send fault message in exception handler.
I haven't a proxy. I want to create fault message manually and send it. Is it possible? I cannot create an interface of fault message type.

Hi Sergey,
As far as I know, it's possible to catch the mapping/send exception.
It's also easy to define an exception branch for this exception, and inside the exception branch, send a "normal" message in a send step.
However, as far as I know there's no way of specifying a BPM send step that sends a fault message.
At least in my experience, regular messages are just as useful when sending error information.
Cheers,
Ofer

Similar Messages

Handling SOAP Fault messages in BPM

Hi,
My scenario is Sync-Async Bridge involving File to SOAP transformation. I have used BPM as 1 file has many records and each record is required to call the web service synchronously.
In the BPM I have
Receive ---> Transform (1:n multimapping ) -
> Block (Par for Each)
In Block I have Send Sync step to call Web service . I have an exception branch for the send step for catching Fault message that is sent back from webservice for Application Fault.
Problem:
Though the Fault message is sent from web service ,in the BPM the block goes in error saying : "No exception defined for fault message ". The Exception brach is not executed.
Please suggest if anyone has come across such a scenario and solution to this.

hi satesh
using "exception handler" in BPM we can handle the error messages
regards
kummari

Handling fault messages in BPM

Hi,
I am using BPM for a RFC to SOAP scenario to handle Fault messages. (Please have a look at my previous post also SOAP Fault message )
I have created an exception block in BPM to catch the fault message from SOAP service. Inside the exception block i need to map the fault message to RFC response. But fault message is not accessible in Exception block.
Let me know if you have any idea to solve this.
Thanks,
Uma

Uma:
Let me make clear the requiremt. You have RFC Import(aka Request message) and Export(aka Response + Exception) and you have Web Service with Request, Response, Fault messages. And you want to send the fault messages back to the RFC in addition to the response. I was wondering, If we do the following mapping without BPM, does that fulfill your requirement.
RFC-Import <----
> SOAP Request
RFC-Export <----
> SOAP Response
RFC-Export <----
> SOAP Fault
Can you let me know if you face any problems with this one. I have seen your other thread and was wondering, whats the problem is. May be I didn't understand the requirement properly. Please clarify me

Fault message in BPM process

I have a bpm process with a sync send step. i have a default fault message strcuture and my sync interface ( a proxy) is using this as fault message format. In case of an fault in the proxy i get the fault message returned. In my bpm i have an exception handler installed for the exception. What i would like to do in my process is send the fault message to another step like a send step.
i m not looking to understand sync/async bridges or how to setup a bpm process. I am looking for help in how i can work with the fault message in my bpm process other then only let it trigger the exception routine

Hi Frank,
in the view of your BP an exception at proxy side is no reason to stop processing. The message will be put to your interface and it is your decision to put data into a container and to send it. For using a "global" container for every kind of message have a look to my weblog <a href="/people/udo.martens/blog/2006/04/28/bpm-container-for-any-message-type Container for any Message Type</a>. If your send step is not successful and you want to catch that: Define an exception branch for your block, where you send a senseful message to notice the error. You can refer in the original send step the exception, during runtime the process jumps into the exception branch and is doing that what you defined there.
Regards,
Udo

Handling SOAP Fault Message in BPM

Hello XI SDN'ers,
I am getting SOAP Fault Message in my SOAP Scenario and I am not aware of Handling that error in my BPM. Could any one tell me, How to handle such error's in BPM?
Thanks & Regards,
Satish.

hi satesh
using "exception handler" in BPM we can handle the error messages
regards
kummari

Using Fault Message Type in BPM

Hi,
In my BPM Scenario, I am using a synchronous send step in which I am using a fault message type.For giving the container for the fault message in the Properties area of the send step, I want to define a container corresponding to the Fault message Type I have already defined.How can I achieve this since it is not possible by defining an Abstract Interface? Can someone please explain how to do this?
Thanks and Regards,
Soumya.

Hi Soumya,
Here are the links for two threads. one has discussed fault mssage type in bpm and the other the general application of a fault message type.
thread1:- Alert monitoring and fault message types
thread2:- fault message in BPM process
Regards,
Sushumna

Send Fault message from SAP XI

I have scenario: get async file from FTP. Starting BPM. From BPM I send message to SOAP service(sync). Where I recieve Fault Message. In BPM I have exception handler.
Could any body tell how send parced Fault message to FTP.
As I understand we need mapping somthing like "Fault message type" to "Inbound message type"

Hi Anton,
Its not possible to catch the data of fault message in BPM with the standard design.Since you can't make an abstract interface of the fault message.
The option available is to parse the XML in the fault message mapping and do a call using UDF's (RFC, SOAP, JDBC calls are supported).
cheers
Sunil.

BPM: System_Error" SOAP fault message received

Hi,
We upgraded SAP system from 4.7 to ERP2004 on 09/17/05.
We have XI-3.0 version from last 9 months and this BPM was working good so far. We have not changed anything in it except we upgraded the SAP system.
We are using ABAP proxy from SAP to send "userid"
message to XI-BPM and then it would make a Synchonous call to SAP system to get roles of those "usrid".
In the first step when it is sending data to XI an exception is raised and in the second step when it tries to make synchronous call to SAP we are getting error:
<Trace level="3" type="T">Deserializing message object...</Trace>
<Trace level="3" type="System_Error">SOAP fault message received</Trac
<Trace level="3" type="System_Error">SOAP fault code: Client</Trace>
<Trace level="3" type="System_Error">SOAP fault string: Error during c
I noticed that the XML name tag looks different now
Before upgrade when message was successful.
<?xml version="1.0" encoding="utf-8" ?>
- <ns1:MT_ECA_USRID xmlns:ns1="http://bcm.edu/common"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<USRID>CLARKSON</USRID>
<USRID>2_MA140016</USRID>
</ns1:MT_ECA_USRID>
After upgrade when message is failed
<?xml version="1.0" encoding="utf-8" ?>
- <nr1:MT_ECA_USRID xmlns:nr1="http://bcm.edu/common">
<USRID>AABULIMI</USRID>
<USRID>AB147899</USRID>
<USRID>ACHALL</USRID>
</nr1:MT_ECA_USRID>
You would notice that
" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
missing after upgrade.
I would appreciate if anyone could help me.
Mrudula

Hi,
Can you paste the full error message. Also take a look at the default trace log in Visual Admin. Set the logging for soap to debug.
Naveen

Handling fault messages in an Integration Process (bpm)

I have a bpm in PI 7.11 which performs a synch call to an external webservice. In addition to the request/response, that webservice can also generate two faults: ObjectNotFoundFault and generalfault. I am having trouble handling these faults - when a fault occurs my handler is not being invoked and thus the bpm process stops/errors. When I look at the underlying process (via txn swi1), I see the exact error text:
"No exception defined for fault message ObjectNotFoundFault http://www.companyb.com/services/olsa_v1_0/"
From what I understand within the bpm synch call step to the webservice I need to do the following to handle the exception/fault:
- put the synch call (to the webservice) into a block
- add an exception branch to that block named let's say A & set the exception handler of that block to be A
- in the exception setting of that synch step, select A
In my case, I don't care about the fault details other than to ensure it does not stop the whole Integration Process, so in my exception branch I don't do anything. I did try adding a control step within it too (as per SAP Press text book).
Is there anything else I need to do here? I am not mapping the returned fault - does the fault need to be mapped (not sure how I would do this given that the synch step uses an abstract interface and therefore to my knowledge no fault mapping can be done)?
There are 2 Notes that describe my issue exactly:
https://service.sap.com/sap/support/notes/1484903
https://service.sap.com/sap/support/notes/1158699 <-- this one refers more to me, but we already have in 7.11
Can anyone let me know exactly the steps I would perform to handle these faults - does the exception name / handler A above need to be named the actual exception / fault ObjectNotFoundFault?
Any help appreciated.
Thanks,
Keith)?
Any help appreciated.
Thanks,
Keith

Thanks - my scenario I guess is #2 of that blog. But is your take that even if I don't care what is in the fault message, i.e. I don't care about the contents of it but rather I just want to continue on from it, that I still need to perform this java coding? It's not clear to me from what he says - it seems to me he does the java coding to actually capture the contents of the message. I am in fact using the soap axis adapter too, as he is. The screen shot showing the exception branch is basically what I have.
Regards,
Keith

BPM Fault Message Exception error !

Hi here is what I am doing
Sync webservice-->Sync webservice call using ccBPM.
This is what I defined in the BPM
1.)Sync rec
2.)Block with Exception handler.
3.) Sync send inside the Block with Fault exception defined.
I defined fault messages for the interface. The Interface works fine when there is no exception but when there is a Fault exception I get the following error in SXMB_MONI_BPE "No exception defined for fault message Faultmessage urn:XXXXX:XXXXXXX ". Exception 8999, Error type 2, Area SWF_XI_ADAPTER Message 81. Variable1 Faultmessage and Variable2 the namespace".
I rechecked my BPM and could see the Fault Exception defined for the Sync send step and it has an exception defined for it too.
I checked SXI_CACHE and the return code is 00.
We are running on PI7 SP13. Did any one face this kind of problem .

Hi there,
I have the exact issue in PI 7.1. Have any of you guys could resolve it? Can you please share your responses.
Thanks.
Anshul

Fault message in synchronous send step in BPM

Hi,
When executing a synchronous send step in BPM it is possible to handle application errors (fault messages) with an exception branch. But how do you get hold of the actual data in the Fault message(faultText, faultURL, faultDetail etc) for further processing (mapping)?
Kind regards Johan

Johan,
u have to define another container element in integration process.
For that container element an Async Abstract interface has to created with falult message as the message.
Do u have the fault message defined already...
Also go through this thread.
Fault message handling in BPM
-Naveen.

BPM synchronous send step - Fault message extraction

Hello Experts,
I am developing a BPM with Asynch RFC -> synch Webservice -> Asynch RFC scenario.
I have defined fault message in the synchronous interface used in the send step for web service, and also defined
exception branch where an alert is thrown.
In the alert, i want to send the fault text from the fault message. How can i do that??
Thanks

Hi Mona,
SOAP adapter doesnt support fault messages.
check stephan's reply @ How catch the SOAP Fault Message ?
> SOAP adapter does not support fault message.
> Any fault is treated as error.
> fault messages are only supported for XI messages (ABAP or Java proxies) and RFCs.
Fault message handling is not possible inside BPM.

BPM + PROXY + Fault Message

Hello
My scenario is JDBC -> BPM <-> Proxy
I developed a BPM has a step-type <SENDER> that is synchronous.
Information on the above step:
. The message interface used an output, an input message and also a Fault Message.
. I'm calling a proxy in the ECC and runs an exception if an error occurs in the application (inside the proxy).
. This exception is returned to the BPM and I run a <block> to handle the exception.
My need is to capture the contents of the exception in the BPM and send this text to another application.
How do I recover the contents of the exception returned by Proxy in BPM?
Thank you,
Aroldo

Hi, it is not supported in the meaning that the payload of the fault message is not returned to the integration process, so that's right Baskar. The only thing possible is to trigger exceptions for fault messages, see [Sending Messages from Integration Processes Synchronously -> Procedure -> Specify Exceptions|http://help.sap.com/saphelp_nw73/helpdata/en/43/6211331c895f6ce10000000a1553f6/content.htm].
Possible solutions:
If it is a custom proxy you could change the behavior so that no fault messages are triggered. Instead you return the error message in the payload structure of the response.
If it isn't a custom proxy you could create a custom proxy wrapper with a separate structure for exceptions in the response. Call the implementation of your desired proxy in the wrapper implementation, handle the exception and return the exception contents in the separate structure of the response.
Or you could try to create a data type enhancement for exception contents for the response message, create a proxy from the enhancement, and implement the OUTBOUND_PROCESSING method where you copy the exception messages to the structure of the data type enhancement.
Regards, Martin

BPM in CACHE won't activate. Fault message is not defined

Hello All,
After adding fault messages to our RFC scenarios, our BPM will no longer activate from transaction SXI_CACHE. The ReturnCode is 99. When we attempt to do a manual activation, we get an error which reads:
<b>Send step: Fault message '722783b5171311d9881bd5c4c0a8a777' is not defined</b>.
Have any of you seen this before?
We have mappings for the fault messages in interface mappings. Is there something else needed in the BPM itself?
Thanks,
Jimmy

From OSS:
The synchronous send steps define a fault message as exception. In this
case you have to wrap a block around every one or all send steps.
The block catches the exception, in your case the fault message.
The problem is, if no handler is defined, the import of the process fails (SXI_CACHE).
So modify the process, wrap a block with exception
handling around the send step and activate once more.

Sending the fault message payload to sender using BPM.

I have the scenario where BPM splits a file into multiple record and each record calls webservice.
For a successfull call a success response is generated by web service . For a failed transaction a fault message is sent back which needs to be delivered to the sender's mail ID.
I am not able send the fault message payload which contains the error message details to sender ..
Please suggest what can be done for such a scenario. Is there any way by which error details can be sent to sender?
Edited by: trisha.b on Nov 28, 2010 7:23 PM
Edited by: trisha.b on Nov 28, 2010 7:29 PM

Hi,
Check the blog http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/22017.. [original link is broken] [original link is broken] [original link is broken]
You can handle the exception on your web service and model a Notification task so that you can send e-mail notification to the sender in case of exception
Regards, Anil

Emulate Fault message in BPM

Similar Messages

Maybe you are looking for