Enable 3rd party selection tab in infopackage

HI,
When i create my infopacakage for 3rd party datasource, my 3rd party selction tab is not enabled to give any inputs. Could anyone pls guide me how to get it enabled.
Anamika

Hi,
I created the infopackage on Third Party i.e. ETL source System . In that Infopackage there is tab name as "3rd Party Selections". In that tab I have to give selection for the ETL workflow which will process the data from ETL to BW. And that tab is in the disable/ display mode. So question is how to make it enable or in the active mode to provide 3rd party selection condition?
Thanks,
Anamika

Similar Messages

Data Selection tab in infopackage

Hi Gurus
Its a very basic question but can anybody tell me what function the "data selection " Tab does in infopackage?
I know the setting required on R3 side for that but not sure why we use the data selection.
Can we use this data selection for master data as well?

Hi Kris,
Data Selection tab allows you to select: date ranges, document numbers and the like.
In order to have filds in there, you should first select in the DataSource in the R/3 side wich field could be selected.
If it is a Generic DataSource, you can do it running RSO2 transaction code.
<text removed by moderator>
Claudio
Message was edited by: Matthew Billingham

Use ABAP Routine in Selection Tab of Infopackage

I am trying to use the ABAP routine in the InfoPackage SELECTION Tab to "EXCLUDE" a value. For example, I want to load all the Material types, except ZUN1. But, when I write in the ABAP, l_t_range-sign = 'E' instead of 'I' or l_t_range-option = 'NE' instead of 'E', I get an error saying these values are not permitted.
Is there any way to exclude any value from Selection in the InfoPackage?
Regards,
Milind Vad

Hi dear and welcome on board!
You have two options:
include everything you want in your IP
load everything and exclude what you don't want in the start routine in transfer rules
No other ways...
Hope it helps!
Bye,
Roberto
...and please don't forget to reward the answers...it's THE way to say thanks here !

How To Add InfoObject in the Data Selection Tab of InfoPackages in 2004s

Hi Y'all!
I would like to ask how to add an infoobject in the Data Selection Tab of the InfoPackage in 2004s. It says its optional, this definintion of selection criteria for the infopackage.
My apologies, I don't understand how this is done. Surely, I would like, however, to understand how to add an infoobject in this data selection Tab of the InfoPackage in 2004s.
Can any kind soul out there (gurus) please lend me your thoughts?
Regards,
Philips

Hello Rajani!
Thank you very mcuh for that! I super appreciate it! Can you prescribe how I can do this step by step please? Where exactly in the DS can I locate this "field for selection" option in the DataSource?
Regards!
Philips

Multiple Data in selection tab of infopackage

Hello,
I need to select in a InfoPackage from a InfoObject multiple values, which means
I need to implement a logical OR in the selection of an InoObject in a InfoPackage.
How to set up L_T_RANGE ?
Thank You !
Martin Sautter

For dynamis selects this is also helpfull:
Re: ABAP Selection in infopackage
THank You
Martin

Data selection tab of infopackage

hi all,
how do we select data from infopackage if you do not want a certain value?
I wrote ABAP code to select not as:
L_t_RANGE-SIGN = 'I'.
L_t_RANGE-option = 'NE'.
L_t_RANGE-low = 'Y'.
But I got errors. Sign 'I' with 'NE' is not allowed. Please advise.
Linda

Linda,
<b>Exclude Option won't work in the Infopackage data selection routine.</b>
You can use SIGN equals to I only and option values EQ, CP and BT.
Try append all the required values. use BT as well as eq.
If you want to permenantly exclude those to BW. you have 3 good options along with Infopackge Selection.
1. <b>User Exit in the Source System.</b>
2. Start Routine in the Transfer Structure.
3. Start Routine in the Update Rules.
all the best.
Regards,
Nagesh Ganisetti.
*assign points if it helps.

Hierarchy selection tab missing in infopackage

Hi Experts,
i am looking how to load multiple hierarchies to Bi so inorder to know available hierarchies from OLTP in hierarchy selection tab in infopackage which was not available at all. i had only data selection tab.i am using version Bi 7.0
how can i found hierarchy selection tab in infopackage
Regards,
narasimha.

Hierarchy loading is the same for info object which is created under the info object itself.
loading is uploading the data to the hierarchy, creating hierarchy is you will be maintaing the structure of the hierarchy under that info object
Are you sure you have Hierarchy maintained for your info object?
If the hierarchies are maintained you will find the Bell type symbol under the info objects in info providers tab.
As told by mti - drill down till you find the data source --right click on it and select create info package - here you can find the tab hierarchy selection tab (which is the second tab in that screen).
Check the below link to know more abt hierarchies
http://help.sap.com/saphelp_nw04/helpdata/en/0e/fd4e3c97f6bb3ee10000000a114084/frameset.htm

Motion 3rd Party Filters

How do I install 3rd party filters in Motion 3? Also.. How can I remove folders in the 3rd party filters tab within Motion. Where is the 3rd Party Filters folder in the finder? thanks

I have all that, but I don't understand how to do it.. In the original Motion, there was a 3rd party location selection in the prefs.. The manual, on page 139, says Click Choose (next to the search path). I cannot find that... I can only find the CHOOSE for the Library Path.
On page 139 it states that the FX have to be Universal, but on page 963, it says it 3rd party filters only work on Power PCs...
I've also added a few "Untitled Folder"s to the 3rd Party Filters tab within Motion. How can I remove them? Do they physically sit on the hard drive somewhere?
I'm lost. Can I do this....? thanks

Data selection tab?

hi
in 3.5 if i select check box at transfer rules , i can see all objects at data selection tab at infopackage, in 7.0 if i want see objects at data selection tab, what is option.

HI Suneel
In dtp IN extraction tab we have something called Filter, if u select the object here then it will be available in data selection tab...
Assign points if it helps
Khaja

Selection TAB in ODS and Cube

Hi Friends,
I see Selection TAB in the manage TAB of ODS and Cube, what is the difference of this TAB in cube and ODS??
Is this selection criteria we give in the Data Selection TAB of Infopackage for that particular data target??
Thanks in advance,

This is to be used when you have to selectively delete data from the ODS. For example lets say you've realized that the data is being loaded incorrectly into the ODS from some time (past 3 months). But not all the data is incorrect but only for a few customer numbers (as an example). In this case, you use this selective deletion and give the customer numbers which have incorrect data and delete these records. After deletion and fixing the root cause, you can reload to the ODS using the same selections in the infopackage (mark the request as full repair if you have deltas going into the ODS at the same time). Hope this helps.

How do I enable third party cookies?

Hi Everyone,
I am trying to complete my homework on the My Math Lab website, and this is the message that I keep getting, "You don't have a subscription to this site. Please make sure that the siteid or abbrev is correct. If you are accessing this site from Pearson MyLab / Mastering, make sure your browser settings allow all third party cookies." Is any able to help?
Thanks

Safari - Preferences - Privacy - Block Cookies : Never
should enable 3rd party cookies, although you might also disable any Safari extensions, in case that's a problem.
Safari 6 (OS X Mountain Lion): Manage cookies
Failing that, remove any existing cookies for them, via Cookies & other website data - Details...
& if still an issue - try another browser to see if that allows the site to work.

3rd Party Garnishments - Evaluation run - Off-cycle selection criteria missing

One of our payroll people, when accessing the 3rd Party Garnishments Evaluation Run program RPURME00 (custom t-code with custom variant) does not have the Off-cycle reason and ID selection fields displayed on the pre-execution selection screen. This occurs for her alone and only in our Development client. She can see the fields in our QA and production clients.
I have checked the variants for the program that we are using and none of them specifies anything about restricting or hiding those fields.
We would appreciate any assistance with the problem.
Thanks in advance!

Hi David,
Please check if user has parameter MOL set-up for country code in user parameter under tranaction SU3-->Parameters tab.
Thanks,
Ameet

Audio Output Selection in 3rd Party Media Apps

In all 3rd party media apps that I have, including Netflix and Pandora, among others, I do not have that box/arrow button that allows me to choose which audio output to use.
I normally have my iPhone 4 (iOS 4.3) connected to a pico projector, and paired with a set of bluetooth headphones.
Depending on the order I plug the projector in, or pair the headphones, I can get the audio to play through the right channel, but it is very finicky. If there are any interruptions (call, text, ect) or if Ieave the app, and come back, it defaults to the serial connection, and tries to play the audio through the project.
Is the lack of the audio channel selection button on the iOS side or the app side?
Thanks!

You should be able to reset the default app in application settings, then it'll ask again, but I don't remember how >_>

Cost VPRS in 3rd Party TAB scenario

Hi,
we are using 3rd party processing for some of our materials. In this case sales order triggers the purchase requistion and hence purchase order. Then for TAB, do MIGO and then we post invoice verification for this GR. Then we create delivery and finally billing to customer. Now the problem is that in Billing, VPRS is still taking the value of Sales order VPRS value Hence the cost appearing in Billing is not accurate.
Hence the profit margin calculations are not correct.
Can anyone suggest the way to populate the value of MIRO in VPRS while billing?
Interestingly, when using TAS scenario, we are getting the MIRO cost in Billing into VPRS but not so for TAS...
Thanks

Hi,
Inbound delivery is one way of doing it but in our case, the vendor would deliver the goods at out plant and we simply take the stocks into out inventory by MIGO. Even In inbound delivery process, we do goods receipt from the delivery doc itself (hence equivalent to MIGO)
Now the Vendor sends the invoice in hard copy and we go MIRO w.r.t the PO issued earlier. Now logic says that whatever value we pass in the MIRO should be the actual cost of the product and should be picked up in VPRS in the billing doc for our customer.....
I dont know whether i have been able to explain this or not.
And to your question of using TAB instead of TAS....TAB we are using for some vendors who would not deliver directly to our c/s (like in TAS) but would deliver to our plant and we in turn would deliver to ur c/s.

How to debug a ABAP Routine which is in Infopackage Data selection Tab

Hi ,
Please let me know How to debug a ABAP Routine which is in Infopackage Data selection Tab.

Hi,
You can try to create infinite loop:
DATA: STOP.
WHILE STOP IS INITIAL. ENDWHILE.
Start InfoPackage and then go to SM50 and swich on debugging for your process. Then in debugger you can change value of STOP variable to skip the loop.
Krzys

Enable 3rd party selection tab in infopackage

Similar Messages

Maybe you are looking for