Enable and Disabling the Network Adapter with domain user (Standard User)

Hi Guys.
We setup a active directory in our organization. Added client systems(Windows 7 and Windows 8) to the Domain. Domain users are accessing the system with standard users permission. I don't want to give Administrator permissions. But user should able
to Disable and Enable network Adapter without giving the administrator permissions. Please suggest .
Thanks in advance for the help :)

Hi,
According to your description, my understanding is that you want the standard user has the permission to disable/enable network adapter.
I recommend you to implement this function by group policy:
User configuration - Administrative Templates – Network - Network connections
Enable this policy:
Ability to enable/disable a LAN Connection
Besides, you may consider of joining users to Network Configuration Operators Group, detailed information you may reference:
A Description of the Network Configuration Operators Group
http://support.microsoft.com/en-us/kb/297938
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Download connections doesn't close after I cancel the download, it keep like I am download and only close when I disable the network adapter or reset the router or the firewall

download connections doesn't close after I cancel the download, it keep like I am downloading and only close when I disable the network adapter or reset the router or the firewall.
I use pfsense as my firewall and see the traffic not reseting to zero when I cancel download.
Also, IE doesn't have this problem. When I cancel the download the traffic drops to zero.

And this problem seems to be systemwide. Since I created a new user and under which problem still exists.
Hope apple will look into it

Enable and Disable the file paths

Hai i have two file paths one logical file path and other is physical file path.
I took two radio buttons.
How can i enable and disable the file paths by using these radio buttons.
When i select the 1st radio button then 1st file path is in enable and second file path in disable mode similarly for the second radio button also.
It is very urgent .
With Regards,
Prasad.Tallapudi.

i answered in your other post....here is the code again....
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS: logfile type string default 'Z_DATALOAD',
FILE(128) TYPE C DEFAULT 'nittest.txt' LOWER CASE.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_LFILE RADIOBUTTON GROUP G1 USER-COMMAND C1 DEFAULT 'X',
P_PFILE RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF BLOCK B2.
at selection-screen output.
if p_lfile eq 'X'.
    loop at screen.
      if screen-name = 'LOGFILE'.
        screen-input = '1'.
        endif.
        if screen-name = 'FILE'.
          screen-input = '0'.
          endif.
          modify screen.
      endloop.
    endif.
    if p_pfile eq 'X'.
      loop at screen.
      if screen-name = 'LOGFILE'.
        screen-input = '0'.
        endif.
        if screen-name = 'FILE'.
          screen-input = '1'.
          endif.
          modify screen.
      endloop.
      endif.
if the problem gets solved...please close both the posts

Enabling and disabling the button in the multi record block

hi all,
i am using
Forms [32 Bit] Version 6.0.8.24.1 (Production)
Oracle Database 10g Release 10.2.0.1.0 - Production
i have a multi record block each block contains a button(button is to approve the record in terms of changing the status)
i have the items like date,remarks and button
the button should be enabled if the remarks is not null otherwise it should be disabled.
for this in pre-record trigger i have written
if :record is null then
   set_item_property('button',enabled,property_false);
else
      set_item_property('button',enabled,property_false);
end if;what problem is enable and disable is impacting on all the buttons in the block. in other words if first record's remarks is null then all the records button is disabled. if first record's remarks column is not null then all the records of the button column is enabled.
i have to make enable and disable the button for the corresponding record.that means if first record's remarks column is not null then only first records button should be enabled others should be disabled.
Thanks..

You need to set the No. of items displayed to 1 as Ammad had said, additionally you can set the X and Y Position (Just Y will do and having fixed X) of the button depending upon the current record.
can u explain this part alone bit more (setting the position of x and y)You need to calculate the variable Y_POS depending upon the current position of the cursor that is the current record.
You can find the current record Y_POS using combination of
V_CURRENT_RECORD := :SYSTEM.CURSOR_RECORD;
V_TOP_RECORD := GET_BLOCK_PROPERTY ('BLOCK_NAME', TOP_RECORD);
V_ITEM_Y_POS := GET_ITEM_PROPERTY ('ITEM_NAME', Y_POS);
-- Also needs to add the Y_POS of the relative other items in the muti-record block
V_HEIGHT := GET_ITEM_PROPERTY ('BUTTON_NAME', HEIGHT);
-- Note :- TOP_RECORD Returns the record number of the topmost visible record in the given block.
V_Y_POS := V_ITEM_Y_POS + ((V_CURRENT_RECORD - V_TOP_RECORD) * V_HEIGHT);
-- You will need to add Distance between Items in records if anyThen you can Set the current Y_POS of the button.
SET_ITEM_PROPERTY ('BUTTON_NAME', Y_POS, V_Y_POS);
[/code[
Hope this helps
Best Regards
Arif Khadas
Edited by: Arif Khadas on Feb 24, 2011 4:58 PM

Can I enable and disable the system speaker under program control

Can I enable and disable the system speaker under program control?
I'm using LabVIEW 2010.
The PC is running Windows XP Pro.
Thank you

A song??? I wouldn't exactly play them a "song" if you get my drift...
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

Messaging Server 3.x: Is there an option to enable and disable the ETRN function?

Is there an option in Messaging Server to enable and disable the ETRN function?

Yes. You can add the option for enabling and disabling the ETRN function by
modifying the code in the file 

server-root
bin/mail/admin/html/SMTPChannelOptions.html

The original code to be modified will appear as follows: 



Yes

No

Modify the code to look like this: 



Yes

No


Yes

No

Making these changes will create an extra option to enable and disable the ETRN
function on the SMTP Options page in the Administration Server.

Yes, this is possible. In Cisco Webex Administration->Settings->Audio you can choose your audio (system-wide) options:
WebEx Audio:
Call In and Call Me service – Enables users to attend a teleconference by calling specified phone numbers or by receiving a Call Me call from the system.
Call In – Enables users to attend a teleconference by calling specified phone numbers.
OFF – Disables all calling features.
Voice connection using computer
ON
OFF
See also this section in the administartion guide.

After Installing Oracle Virtual Box and changing the network adapter to bridged mode cant access my server

Hi ,
I have installed Oracle Virtual box on windows server 2008 r2 hosted on 1und1.de.
Till installtion and setting up untun on virtualbox it was fine, but once i changed the adapater to bridged mode. I immediatly lost connectivity with my server and now cant access.
It is now 2 days i cant access my server and neither ping it, also the website hosted on it is also down.
The 1und1 has following 2 options
1) using putty i can connect to server command prompt using administrator but cant run any gui application
2) Server Rescue mode: where i get special environment to start, stop services, access registry and command prompt.
Till now i have tried lot of setting to enable network connectivity but not able to success
This is the result of Ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : s15453760
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter VirtualBox Host-Only Network:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VirtualBox Host-Only Ethernet Adapter
Physical Address. . . . . . . . . : 08-00-27-00-04-FD
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::5d5c:5bbc:c61:e9b1%16(Preferred)
Autoconfiguration IPv4 Address. . : 169.254.233.177(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 352845863
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-15-B9-51-EA-00-19-99-A5-E7-BE
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{BBF9AA14-45EA-460C-8F23-E106D890D878}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter 6TO4 Adapter:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 12:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
How can i restore my connection.
Thanks

Hi,
According to the result of "ipconfig /all", the physical adapter dosen't appear.
Please check if the physical network adapter works properly. We can verify this in Device Manager.
To open Device Manager by using the Windows interface
Click Start, and then click Control Panel.
Click Hardware and Sound.
Click Device Manager.
If the network adapter is working properly, please make sure that the Internet Protocol Version 4(TCP/IPv4) has been checked in the properties of the physical network adapter.
If issue persists, please try to uninstall the Oracle Virtual box.
Best Regards.
Steven Lee
TechNet Community Support

What are the network issues with single user versus mulit-user version?

I am having trouble attempting to share Pages documents over a network. My documents are created and saved in Pages on Mac 1. The same documents are opened, edited and re-saved on Mac 2.
Upon re-saving any document on Mac 2, (originally created on Mac 1), two error messages will appear. The first message says: "You do not have permissions to save changes in this document".
Once I have fixed the permissions problem, another message appears. The second message is: "Type: Couldn't save image. Description: thumbs/pagethumb1.tiff".
The only way to solve this second problem is to save the document with a different name on the station you are currently working on. It looks like the page previews may not be readable from station to station. Not to mention the network permissions not being transferrable from station to station.
I am wondering if both these problems are related to the fact that I am using a single user version of Pages when I should be using a multi-user version because of the network.
The Mac OS I am using is a Family version for up to 5 users. The Pages (iWork) version is strictly single user.
I am currently using Pages version 2.02.
Mac G4 Dual Mirror and Mac G4 AGP Graphics Mac OS X (10.4.8) both systems have lots of RAM; the G4 AGP has a smaller drive

Forgive my ignorance of UNIX, but will what you are
suggesting create multiple copies of the same file,
leading to confusion?
The way I have set up my system there are copies of all my important files on the other machine, but not multiple copies of each file. Rsync backs-up the changes to existing files or copies new files to the other computer. It can be set to mirror one machine on the other, copy only certain files, not copy certain files, etc.
Currently I am opening the file over the network,
making changes and saving them back to the original
file. When I open up the same file on the sharing
Mac and attempt to do the same, permissions and save
problems occur. If I start out on the sharing Mac,
then open the original file on the networked unit,
the same permissions and save problems occur. No
UNIX commands are used.
I don't know what is causing the problem you are experiencing, but there is way to do what you want. Rsync is one way, there are several other ways to synchronise machines that do not involve you typing out unix commands. Do a search here for synching folders
But at least I am only working with one file. And I
have my wife and oldest daughter using the Macs.
They are even less technically proficient than me.
How can I use the method you suggest without having
multiple copies everywhere? And how will I do this
without scaring my Luddite family?
the system I use (rsync, .sh file, cron) is automatic. The files are backed up automatically every hour from 8 am until 10 pm. If there are no changes, nothing is backed up.
my macbook backs up specified files/folders from folder andrew and folder bev to the identical folders on my wife's mac mini.
the mac mini backs up the same folders to the macbook.
I use the mackbook 99% of the time, my wife uses the mini 99% of the time. this way all her files are availalble on the macbook and mine are available on the mini.
Once setup to your liking this is a transparent and unobtrusive system, but there are alternatives.

Can you enable and disable windows task bar

I there a dynamic way to enable and disable the windows task bar?

I am not clear on a way to do this, but if it were possible, you would have to make calls to Windows SDK. You would use the Call Library Function Node to access one of the Windows System DLLs to do this. I would suggest checking http://msdn.microsoft.com. This is a great resource for SDK related issues.
J.R. Allen

I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same displa

I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same display works fine as it is surprising. or maybe someone knows what is the reason for this? is there any way to solve this problem?

More than likely its a hardware issue, I have never encountered such a problem and best bet is to just go get it replaced. If you have insurance on your device apple will replace it as long as there was no water damage, if you dont have insurance they will charge $200 more or less. Hope you get it fixed

My Apple iPod Nano stops playing shortly after plugging in the correct headset, but works on docking station. I've tried enabling and disabling crossfade in settings. Any suggestions?

My apple ipod Nano stops playing shortly after plugging in the correct headset. I've tried enabling and disabling crossfade in settings. Any suggestions?

Make sure your headphones are plugged ALL the way in, meaning the white part of the headphones is flush with the Nano and you cannot see any silver from the plug still showing.
B-rock

The network adapter could not establish the connection with Oracle

I installed Oracle in my laptop (windows 2008), and install Hyperion 11.1.2, when I configure Hyperion, it pops up with "the network adapter could not establish the connection with Oracle"?

Hi,
This usually means that the connection details you have put in for Oracle are incorrect or Oracle can not be contacted.
Double check your configuration connection details and make sure you can access Oracle using them details.
Cheers
John
http://john-goodwin.blogspot.com/

Accessing bits of the data bytes and enable and disabling

Hello i want to send data byte to the CAN and enable and disable one of its bits how to do?

Hey Uday,
I am unsure of what CAN device you are using, as well as what type of programming language you would like to develop in. With that being said I will assume one of our PCI CAN cards and that you will be using LabVIEW to program. Please take a look at the NI-CAN manual for help on programming your CAN card, specifically with reference to chapter 7.
Thanks again and have a great day!
Regards,
Nicholas K
National Instruments
Applications Engineer

After having upgraded my iPhone 4S to iOS 7.0.2, I can not turn on Wi-Fi or Bluetooth. After trying various tricks I found via online forums such as software reset, enable Airplane mode, and resetting the network settings, I have now also completed reset

After having upgraded my iPhone 4S to iOS 7.0.2, I can not turn on Wi-Fi or Bluetooth. After trying various tricks I found via online forums such as software reset, enable Airplane mode, and resetting the network settings, I have now also completed reset of the phone WITHOUT success. Is there something more to it? If not learn hardly be any more iPhone for me. Really disappointed. Grateful for help!

If you have tried all of the steps in this support document http://support.apple.com/kb/TS1559 and have completed all of the user troubleshooting, restart, reset, restore from backup, restore as new, then make an appointment with the Apple store to have the hardware checked.

A box with"1 item" appears next to curser and disable the opening of massages.

Afther opening the 1e massage a box appears next to curser with
"1 item" and disable the opening of other massages, disable the
use of Hotmail.

Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Clear Cookies & Cache
* https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
Clear the Network Cache
* https://support.mozilla.com/en-US/kb/How%20to%20clear%20the%20cache#w_clear-the-cache
Check and tell if its working.

Enable and Disabling the Network Adapter with domain user (Standard User)

Similar Messages

Maybe you are looking for