Enable auto color gets turned off

I have dials working just fine. When I update one of them however, all of them turn whie, without the alert colors. When i look inside, I see that all the ranges are now erased, and the "Enable auto colors" box is suddently unchecked. When I try to check it back on, the program crashes.
I have already installed the patch and the new flash program. Can you please help me resolves this problem?
Regards,
Azer

Do you have wifi access at home?
DO the phones connect to wifi?
do the phones have the same usage as Verizon (approximately)

Similar Messages

All my prints using: Lightroom 5, printer color management turned off, and non-generic ICC profile (e.g. Epson Premium Glossy) have magenta tint or cast

I'm using PC with: Windows 8.1, 64bit, Lightroom 5.4, Epson R3000, 6.75 (latest) driver, color management turned off in printer settings, Lightroom configured to manage color. If I use a generic ICC profile such as Epson sRGB, the prints look OK. But when I use any ICC profile dedicated to my paper and printer combination, such as Epson Premium Glossy, or one created using ColorMunki print profile, the prints all have a medium to heavy magenta tint or cast. The effect can be seen before I even print in the Epson Print Preview. Yet when I soft proof, I don't see this effect. I suspect the problem lies somewhere in the CMM process, but I can't pin it down. Any tips or suggestions are appreciated.

Thank you kindly for your insightful response. As it turns out, the answer is half correct. I've found others who'll say the same thing, that double color management will lead to a very magenta result. I believe this was certainly the case when I first started playing with the settings, Where I went wrong, is that after I corrected my settings by turning off printer manages color and letting Lightroom do the color management, is that the Epson Print Preview was still showing magenta with certain profiles. Not wanting to waste more money on paper and ink, I used the preview to gauge whether I was going to get a normal print or not. Then one day I ignored the print preview's magenta cast as a 'warning' and I went ahead printed the photo anyways. Because I used a profile that I created with ColorMunki Photo, the picture came out perfect (i.e. a very good match to what I was seeing in Lightoom on my monitor). The lesson learned is that for judging the final color correctness, the Epson Print Preview can be way off target and your best bet is to ignore it.

My iphone 4s automatically getting turned off (blank black screen) and not getting started until full battery discharge, after updating to ios 8.0.1

My iphone 4s automatically getting turned off (blank black screen) and not getting started until full battery discharge. Even on long pressing power button - screen doesn't showing anything - not even "needs charging logo".
This is happening only since I have updated to new ios version (ios 8.1).
Is there anyone facing similar issue?? Any suggestion?!?

Hi jayla_mora,
Thanks for visiting Apple Support Communities.
It sounds like your iPhone screen is going blank and not responding.
You may find the tips in this article useful for troubleshooting this behavior:
iOS: Not responding or does not turn on - Apple Support
Best Regards,
Jeremy

Call waiting gets turned off on its own.

i bought an iphone 4s . i am facing a problem that is my call waiting gets off on its own. even though i turn it on it gets turned off after few mins so plz could some1 help

You may want to contact your cellular service provider.

Why does my popup blocker keep getting turned off?

No matter how many times I try - my popup blocker gets turned off the next time I start Firefox.
I've got a current version of Norton running - so I assume there is no known trojan or virus on the machine.
Any ideas?

Mine does that too. I was wondering if it was due to the OS and that sometimes its too much for the 3GS. I've had mine almost 3 years. Maybe someone more knowledgeable will help. :)
(i finally upgraded to the iPhone 5 so I'm looking forward to that!)

Why does "Baskerville Regular" keep getting turned off?

Since upgrading to Mavericks, Baskerville Regular -- the font used by the Dictionary (V2.2.1/156) -- keeps getting turned off. Result: when I open the Dictionary, all definitions etc. appear in bold.
All is fine if I open FontBook and turn Baskerville Regular back on again -- until I restart. Then I have to do it over again.
The problem is on a per-user basis. If I turn the font in on my account, stay logged in, and log in from another account, the font is turned off in that account.
Something’s turning it off. Anyone know what?
Thanks

It is probably related to your other post about being dropped off from the internet.

Why is Firefox intruding and sending updates when auto updates are turned off? This constant update wreaks havoc with add-ons

Why is Firefox intruding and sending updates when auto updates are turned off? This constant updating wreaks havoc with add-ons
Why is Firefox violating my computer?

I left "automatic updates" for Firefox UNCHECKED and left download when updates are found UNCHECKED. " Ask me wha I want to do" is CHECKED.
In English, that means don't automatically update and if updates are found ASK.
It does NOT mean ignore all the instructions and download!

Ligatures are automatically getting turned off

Dear All,
In InDesign CS4 or CS5 without any manual intervention or stylesheet changes automatically ligatures are visually getting turned off in the actual pages which in turn causing the reflow of the content. I am using Adobe Garamond postscript font in the application file. Please let me know if anybody faced a problem like this and advice for any solutions.
Thanks,
Senthil Kumar

Dear Peter,
I am happy to discuss with you about this topic. The ligatures are being substituted in the source of inDesign application file, corresponding PDF on screen and Print.
For the temporary solution i have restart the system at each 8 hours onetime.
Regards,
Senthil Kumar

Blackberry Z10 getting turned-off on 15-17% battery level

I have been using Blackberry Z10 for 2-3 month without any problem,but suddenly my mobile is getting turned-off every time its battery level reaches around 15%.
Suggest any solution to this problem.

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs. If that does not help, then redo the process, but this time increase the wait time in step 4 to 2 hours, and perhaps as long as 4-5 hours.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

After installing itunes windows services get turned off

I have a fresh install of Vista Ultimate Sp2 that has been running wiithout any probolems. I have waited a couple of weeks before installing iTunes. Now after 2 days the computer will not boot to windows. I boot too safe mode and I get a message that System Event Notification Service is turned off. In safe mode the services can't be accessed. So I do a system restore to the time I installed iTunes and all services are turned on and windows boots properly. I waited one week the downloaded iTunes again and reinstalled it. After a couple of days the computer will not boot except into safe mode. So I do a system restore and windows botts up ok. I then wait another week and I go thtough the same routine. I haven't installed anyother software yet, I want to get past this windows services getting turned off issue. I am not using selective startup so all services should start when the computer is turned on. Does anyone know what the issue may be?

A complete uninstall/reinstall of iTunes and related software components is worth a try (7s can indicate trouble with other software components like Apple Application Support). See the following documents for instructions:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
... But if no joy there, let's check to see if there's a .NET issue underlying this:
iTunes for Windows: "Error 7" message when opening iTunes

Ipad mini, after ios7 upgrade if turn off the mobile data, my carrier gets turned off and wifi doesnt work at all. Its slow and app store crashes everytime. Help me to gowngrade to ios6. This really *****.

Ipad mini, after ios7 upgrade if turn off the mobile data, my carrier gets turned off and wifi doesnt work at all. Its slow and app store crashes everytime. Help me to gowngrade to ios6. This really *****.

Tap Settings > General > Reset > Reset All Settings
Then restart your iPad.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, then swipe the slider to power off.
Then press and hold the Sleep/Wake button until the Apple logo appears.
Downgrading is not an option for an iOS device.

Device gets turned off when using data on mobile

device gets turned off when using data on mobile... and not responding,i.e., if we hold the power button also there was no response,not getting on... when I connect it to charger,after 10min it gets automatically turning on.otherwise no chance to use the device..sometimes it gets off at 25%, sometimes at even 72% battery...seems it might be a severe problem..please suggest a solution..

This might help:
http://helpblog.blackberry.com/2013/02/restart-blackberry-z10/

Auto Color Effect flickers off and on

I have just tried using auto color under the video adjust effects and the effect seems to flicker off and on in all of my clips. Anyone else had this problem
or is it my computer? I have a new computer with 12 GB of RAM.
Thanks
Doug

Hunt,
I think that explains it. Thanks a lot!!
Doug
In a message dated 9/22/2010 6:49:14 P.M. Eastern Daylight Time,
[email protected] writes:
Doug,
This is the rub on almost all of the "Auto" Effects. Unless the scene is
absolutely constant in lighting, and needing the same exact correction, one
gets a "pulsing," "strobing" or "flicker."
I strongly recommend using the Fast Color Corrector (or one of the other
non-Auto Effects). Same for Auto Levels, etc.
Good luck,
Hunt

ICloud settings get turned off... even if I turn them on again and again

All iCloud services turn off by themselves. Then I go turn them on and after a few days it happens again...
This situation also happens with the Notification Center settings for mail (badges and benners get deactivated and alerts in Notification Center and on Lock Screen get switched off).
The same thing with iTunes Match and Automatic Downloads under the iTunes and & App Store Settings... as well as Photostream...
Seems like every cloud service coming from Apple is shutting down on my device...
Why does this happen? How do I make it stop? HELP!!

Wrong forum. This is the iPad forum.

Three Way Color Corrector: turn off green clipping info in program monitor???

How can I turn off the green indicator in the program window, that highlights my blacks that contain no image information. I applied a three-way-color corrector via an adjustment layer. Many thanks!

Hi Joe,
I am running on a MacBook Pro, OSX 10.8.3, my graphics card is:
Chipset Model:          Intel HD Graphics 3000
Type:          GPU
Bus:          Built-In
VRAM (Total):          512 MB
Vendor:          Intel (0x8086)
Device ID:          0x0116
Revision ID:          0x0009
gMux Version:          1.9.23
I shot on a flat picture profile with a Nikon D800 and played with the input levels in the 3-way-color corrector. Again, if I brighten the whole image, these indicators will disappear; if I darken the image, they will grow. It is not an artefact, it is a way to show me my crushed blacks. Like a zebra function in cameras. I just cannot find a way to turn this off.
Thanks again,
Carl

Enable auto color gets turned off

Similar Messages

Maybe you are looking for