Enable BGP between PE-CE when PE and CE are in same AS

We have BGP enable PE-CE setup in MPLS network. Customer A has branches with unique AS numbers.
We connected our PE routers via BGP with customer CE. Issue is Customer's Head Office AS number is equal to our AS number .
We are telecom provider having same AS for iBGP in our MPLS network.
Can you say how connect customer AS (Headoffice) with our PE router when PE and CE are in same AS

AS Override?

Similar Messages

  • Enabl BGP between PE-CE when PE and CE are in same AS

    We have BGP enable PE-CE setup in MPLS network. Customer A has branches with unique AS numbers.
    We connected our PE routers via BGP with customer CE. Issue is Customer's Head Office AS number is equal to our AS number .
    We are telecom provider having same AS for iBGP in our MPLS network.
    Can you say how connect customer AS (Headoffice) with our PE router when PE and CE are in same AS

    No, you cannot use it only at one side otherwise one side will try to do an iBGP peering while the other will try to do an eBGP peering. And anyway, IOS is smart enough to refuse the local-as command if the remote-as matches its local AS.

  • Single Code Page Unicode conversion when source and target are the same

    Hi everyone.  We have recently upgraded our non-unicode 4.7 to ECC6 non-unicode.  Now we have begun researching the next step to convert to Unicode.  I know we could have done the Combined Upgrade and Unicode Conversion but I wanted to do thorough testing after the upgrade to eliminate too many variables if problems arose.
    So, my question is...has anyone done the Unicode conversion when source and target servers are the same?  Most documentation I've seen recommends a system copy to another box first.  I did find one forum thread that gave a high level approach to doing the conversion with just one server and listed this:
    Step 1:- Run Tcode SPUMG to scan
    Step 2:- Export Database
    Step 3:- Drop Database
    Step 4:- Create New Database
    Step 5:- Import database
    Step 6:- Chnage unicode Kernel
    What are your thoughts?  Is it supported?  Am I wasting my time and should I just bite the bullet and buy yet another system?  Thanks in advance.
    -Anthony

    Theoretically that's possible, yes. However...
    > Step 5:- Import database
    > Step 6:- Chnage unicode Kernel
    the import must be done using the Unicode kernel.
    So basically you can
    - export the old systm
    - uninstall system + database
    - start as if you were installing "from scratch" on a new box
    Markus

  • HT4528 How do you fix when you and somebody are sharing same hotmail it won't let you sign out of Apple ID account in AppStore won't let you go to iCloud on settings or let you fix your addresses who gets your messages and stuff like that on iphone

    How when your Sharing a Apple ID with somebody after I updated it to 7.0.4 it changed my message stuff and wouldn't let me go to iCloud or switch apple id's how do I fix all of this stuff

    Wow that was really quick, thank you so much.  Im not sure at all which version it was because i said it was around 4 years ago he bought it.  I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names.  isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
    So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
    either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
    sarucia

  • Logical systems assignment when SRM and ECC are on 2 different servers

    Hi SRM guru's,
    What is the standard practice for Logical system creation and assignment when  ECC and SRM are on 2 different servers.
    I could not able to find which i created a logical system  in SRM server which i created in ECC
    Same for the ECC also.
    how do i assign logical system of SRM to ECC
    vice versa.
    your prompt response is appreciated.
    Regards

    Hi Sai,
    Logical System Naming/Creation procedure is not dependent on the servers but it is just a logical representation of a system.
    As you are trying to name logical systems for ECC & SRM, please follow the below procedure which is usually recommeded by SAP and followed.
    Logical System : <SID>CLNT<Client Number>
    For Example if you have a client 300 in system DE0 (also called SID), the logical system name will be DE0CLNT300. And it will be same for SRM system.
    You can refer the below document which eplains the creation of logical system and RFC destinations etc
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
    Note: Only while configuring the RFC Destination, the servers will play a crucial role.
    Regards
    Kathirvel

  • I have two Apple accounts the one on my phone and computer are the same the one on my mini i pad is different I have credit on my mini i pad however, when I purchase an App or movie I am charged on my credit card and the $40:00 worth of I Tune cards is by

    I have two Apple accounts the one on my I phone and computer are the same the one on my mini i pad is different I have credit on my mini i pad however, when I purchase an App or movie I am charged on my credit card and the $40:00 worth of I Tune cards is by passed I have tried to change the mini i pad account details to be the same as my computer and original apple i.d.account however, it will not allow me to do I have tried to reset the mini  i pad but not all the way to factory otherwise I would loose all my data. I have visited a genuis bench at Fountain gate however, they tell me I need to ring apple support which I will do on the next working day.

    You are going to need to change the email address you use with your old ID. Once you have got access to your old account you will then log into both accounts at the same time on your Mac and transfer your data to a single account. We can do this later, but need you to get access to your old account first.
    My Apple ID

  • Problem with brtools when sapdata and logs are on diff drv

    Dear SDN,
      I have installed was 640 on Windows w/oracle 9.2. When I try to use brtools for instance management it is giving me an error saying that it cannot find the directory "sapbackup" I am guessing that is because when I did the install I chose to put the datafiles in a different location than the logfiles.  I would have thought that sapinst would have set the proper env variables, but sapinst didnt set any of them. Any suggestions?
    Thanks
    Jeremy Baker

    Hi,
    Please check the following information.
    Environment variables define parameter values used by the Oracle database and BR*Tools.
    The database uses the parameter values for many different purposes. BR*Tools also uses the parameter values.
    Structure
    The following variables are required:
    ·        ORACLE_SID
    System ID of the database instance
    Example: C11
    SAPSID or sapsid refers to the SAP System ID.
    DBSID or dbsid refers to the name of the database instance (database instance system ID).
    When a single instance is installed, SAPSID and DBSID are the same.
    ·        ORACLE_HOME
    Home directory of the Oracle software. This variable no longer needs to be set. If not set, the SAP tools determine its value from the registry.
    Standard: . The environment variables only have to be defined individually if directories are used that deviate from the default.
    For example: SAPDATA1= F:dataprodsapdata1.
    Other environment variables that you can set for BR*Tools:
    ·        BR_LINES
    Definition of the number of lines in list menus.
    Recommended height: ³ 20 lines.
    For more information, see Configuring the Scroll Line Count for BR*Tools.
    ·        BR_LANG
    Definition of the message language:
    ¡        E: English
    ¡        D: German
    ·        BR_TRACE
    Setting the trace function for error analysis.
    Source: http://help.sap.com/saphelp_erp2004/helpdata/en/f8/fd0d24bcb8e14487624ff0b836b5b2/frameset.htm
    Hope that helps.
    Regards,
    Siddhesh

  • [svn] 3580: MXMLG-243 - Path does not draw in the correct location when width and height are set

    Revision: 3580
    Author: [email protected]
    Date: 2008-10-10 16:24:50 -0700 (Fri, 10 Oct 2008)
    Log Message:
    MXMLG-243 - Path does not draw in the correct location when width and height are set
    Fixed MatrixUtil.transformBounds to offset the four bound points by the origin
    Bug: MXMLG-243
    QA: Yes
    Doc: No
    Review: Evtim
    Ticket Links:
    http://bugs.adobe.com/jira/browse/MXMLG-243
    http://bugs.adobe.com/jira/browse/MXMLG-243
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/utils/MatrixUtil.as

    Hi,
    For web application problem, please post your thread in
    ASP.NET forum.
    Best Wishes!
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey. Thanks<br/> MSDN Community Support<br/> <br/> Please remember to &quot;Mark as Answer&quot; the responses that resolved your issue. It is a common way to recognize those who have helped you, and
    makes it easier for other visitors to find the resolution later.

  • [svn] 2530: Fix incorrect drawing of line, when xFrom and yFrom are non-zero

    Revision: 2530
    Author: [email protected]
    Date: 2008-07-18 15:44:40 -0700 (Fri, 18 Jul 2008)
    Log Message:
    Fix incorrect drawing of line, when xFrom and yFrom are non-zero
    Reviewed by Ryan
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/Line.as

    Revision: 2530
    Author: [email protected]
    Date: 2008-07-18 15:44:40 -0700 (Fri, 18 Jul 2008)
    Log Message:
    Fix incorrect drawing of line, when xFrom and yFrom are non-zero
    Reviewed by Ryan
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/Line.as

  • Strange problem with SQLPLUS when client and server on the same box

    Hi,
    I have the problem with SQLPLUS when clinet and server on the same machine.
    With client and server on the same machine i am running the command
    sqlplus -l username/password@connect_identifier as SYSDBA.
    With this command, even if you pass in wrong username or wrong password or both as wrong you can able to connect to database and execute queries.
    Once Connect_identifier is correct and trying to log in as SYSDBA ,sqlplus will log in to DB with any username and password.
    How to get rid of this behaviour. Is there any way to do this.
    I am running this command by creating a process in C#
    Edited by: user11000236 on Jun 16, 2009 10:31 AM

    user11000236 wrote:
    Thanks for the info.
    How does Oracle/SQLPLUS allows any username or password to log in to DB with SYSDBA Privillages? What is the concept behind this.?
    This is explainted in the above mentioned link:
    Operating system authentication takes precedence over password file authentication. If you meet the requirements for operating system authentication, then even if you use a password file, you will be authenticated by operating system authentication.

  • HT1766 I have lost my contacts but my husbands phone and mine are on same itunes account how can I transfer his contacts to my phone?

    I have lost my contacts but my husbands phone and mine are on same itunes account how can I transfer his contacts to my phone?

    Thank you for that.
    I do have contacts in Windows Live Mail but still can't find Windows contacts where you said, I have:
    Sorry about the text size, but I think you can see what I have.
    Thank you for your help so far, I just need to make sure its definitely gone before I give up!

  • Add Approver button disabled for PO in sap srm when GR and IR are already posted

    Hello Gurus,
         One of my user has edited an old PO for which the GR and IR has already been posted in backend. Now the reason for editing was to change the expected value for 3 item and he changed the value the approver is still blank as for old PO's there was no approval required but later on the whole scenario changed and based on total value the approvers are decided now. But for this PO still its not showing the appovers and also the add approver button is disabled. Is there any way to enable the Add approver button. Also please let me know whether addition of approver is allowed after the GR and IR are posted in backend.
    Thanks
    Gaurav Gautam

    Solved.
    In Control Actions -> Configure Control of Actions on Header Level, it's not neccessary put the subtype equal to 0.

  • Issues when Insert and Analyze at the same time

    Hi All,
    We have a weekend job that used to take 12-15 hours usually and insert around 8 millions of records to a table from external table. Last weekend the same load took 60 hours and it move to Monday and there are some business impact.
    While we investigate the same issue we identified that there is one more weekend analyze job for all the tables and indexes and took around almost same time and we noticed that the table we inserted the 8 million records alone it took around 15 hours. This table now has around 91 Core records.
    We need to identify why this jobs taken long time as almost 4 times compare to the normal scenario.
    I would like to know what exactly happen when Analyze and insert happened to the table at the same time. And What all issues can occur because this.
    Best Regards,
    Shijo

    Ok,
    It is unclear what version you are using as you forgot to post that.
    Furthermore it is unclear what 'Analyze' is, as analyze statistics was already deprecated in 9i.
    Secondly, most people is this forum speak English, and they are accustomed international units only.
    Sybrand Bakker
    Senior Oracle DBA

  • Parametrized relation connections - don't work when source and target are different

    Hi All,I have next problem:I am using parametrized relation connection firstConnection (user and (encripted)password are taken from parameter file). Here are values from param file: $DBConnection_source=firstConnection$DBConnection_source=firstConnection$ParamUser=svaba$ParamPwd=Dni32iRiH0Yjro1U04+RTC==  This is (source and target are same) working fine for years.
     But now I need two different connection, i.e. source is (existing)   firstConnection and target is secondConnection. On both instances I have  same user 
      (svaba) with same password. I created second parameterized connection with  user = $ParamUser    and password = $ParamPwd     Now, parameters are: $DBConnection_source=firstConnection$DBConnection_source=secondConnection$ParamUser=svaba$ParamPwd=Dni32iRiH0Yjro1U04+RTC== When run workflow, got error: ORA-01005: null password given: logon denied.I triede to change connections by entering values for password (not use parameters for password) got error: ORA-01017:invalid username/password:logon denied.When I am using same (parametrized) connection for source and target (any of these two) everything is fine. That is sign that connections are good. Does someone have any idea about this problem

    Hi All,I have next problem:I am using parametrized relation connection firstConnection (user and (encripted)password are taken from parameter file). Here are values from param file: $DBConnection_source=firstConnection$DBConnection_source=firstConnection$ParamUser=svaba$ParamPwd=Dni32iRiH0Yjro1U04+RTC==  This is (source and target are same) working fine for years.
     But now I need two different connection, i.e. source is (existing)   firstConnection and target is secondConnection. On both instances I have  same user 
      (svaba) with same password. I created second parameterized connection with  user = $ParamUser    and password = $ParamPwd     Now, parameters are: $DBConnection_source=firstConnection$DBConnection_source=secondConnection$ParamUser=svaba$ParamPwd=Dni32iRiH0Yjro1U04+RTC== When run workflow, got error: ORA-01005: null password given: logon denied.I triede to change connections by entering values for password (not use parameters for password) got error: ORA-01017:invalid username/password:logon denied.When I am using same (parametrized) connection for source and target (any of these two) everything is fine. That is sign that connections are good. Does someone have any idea about this problem

  • Increase internet speed when DNS and ISP are good

    How do you increase your internet performance when?
    1. Your ISP is great. I have Verizon blast.
    2. download and upload are not bad
    3. You do not want to be attached to ethernet cord.
    4. namebench says your current DNS servers are the "fastest".
    5. I have a hunch I could do more to combate the "noise" coming from the other people in my apartment complex. I have tried changing channels from default but it doesn't seem to make to large of a difference because some of their routers seem to randomly picl channels, sometimes the ones I'm on.
    So here is the challange:
    How do you increase your internet performance when? Are there settings you can use within Airport utility? Thanks.

    The best way to find where the problem is without using test gear is by the process of elimination.
    Test you LAN using LAN Speedtest.   First test using Ethernet connections and see if you can get speeds of 90+ Mbps.  Much higher is possible if the equipment you are testing with has gigabyte capability at both ends.
    If you can't  90+  on your LAN  there is a problem with your LAN setup that needs to be addressed.
    Then you can test  speeds on your LAN using WiFi.
    Using Speedtest introduces to many additional variables making it very difficult to diagnose throughput problems.
    Once you know that your LAN is up to standard then you can point at Verizon.

Maybe you are looking for