Enable Business Objects in Enterprise into Services

Dear all,
environment : Enterprise Portal / mySAP ERP 2005 / Visual Composer.
I would like to use e.g. List Order Fulfilment ( a BO in the pcd)
PCD location : pcd:Business_Objects/com.sap.pct.erp.common
Object type : com.sapportals.portal.businessobject
in Visual Composer
In the Portal Content, I found the BO. I wnet into the BO Editor, there is no iView.
How can I use those BO as Services in Composition env. , e.g.Visual Composer ?
Please advise.
Regards
Olivier

I found the answer in
How to use web service in ECC 6.0
Thank you

Similar Messages

How to enable Business Objects Inbox to receive reports?

How can I enable Business Objects inbox to receive report?
I can schedule or send report to a recipient without error, however, if I log into system as the receipient, I could not find the report in the inbox.
Any solutions?

Hi Simon,
The report is not sent because of missing rights on the report or the Inbox.
You can check this article to get minimum rights required to send to Inbox : 1612499 - What are the minimum rights required to be able to send a report object to another user's inbox on BI Launch Pad?
I hope this helps.
Regards,
Yosra

Retrieve multiple records of Business Object in a Application Service?

Hi,
I am working on CE71.
I want to know how to retrieve multiple records of a Business Object in a Application Service?
Regards,
Rahul

Hi,
This can be achieved by adding find method on one or multiple attributes of the business object.
Suppose There is a customer business object with attributes (name, id , city, country ). Now you can add findByCity operation that will return all the Customer Objects which have the City = as entered by user.
Now this find operation can then be called by your application service and this list can then be returned as output of the application service.
Hope this helps,
Ashutosh

Business Objects Reports and Web Services for Dashboards

Hello!
I am writing a Business Object report against my Universe. I save the report to the CMS and then right click on the report block and click "Publish as a Web Service...". This opens up that diaglog and I am able to publish the web service. I then can import the web service into Dashboards 4.1 (Xcelsius) and am working working to figure it out further at this point.
My question is this: When I go back to the report in Business Objects, and modify the report, I would like to republish the web service. I click on Design and rework the report. Run the report. Save the report. I right click on the report block and I don't see the "Publish as a Web Service..." choice.
What am I doing wrong?
Business Objects 4.1...
Thank you.

Hi Susan,
Go to the web service publisher, expand the web service, select the block and select edit.
Select the content and prompt and select Update.
Regards,
Abhilasha

Business Object creation error: The service mapping is missing

Hi developers,
In my CAF 7.1, I have my business object "maintenanceRequest" with several attributes.
Persistency is remote. Permission check is disabled.
Create operation is mapped to the external service (enterprise service) createMaintenanceRequest.
The input fields are mapped, output fields are not mapped since create operation doesn't have any.
All the other operations are not mapped.
I have exposed as web service the operation "create",
I have generated, built and deployed the app.
When I try to run it from wsnavigator I get an error in the SOAP response:
com.sap.caf.rt.exception.CAFCreateException: The service mapping is missing
Please note that the ES works ok (e.g. from Visual Compose 7.1).
The ES was imported in NWDS 7.1 from service registry.
Can anyone please help?
Thanks, regards
Vincenzo

Hi Sampath, thanks for your helpful reply.
I followed the steps from saphelp, but I get errors.
I mapped my external service destination (an R/3-based Enterprise Service published in service registry) to:
- UDDI_DESTINATION (error: objectNotExist) [but the ES is correctly published in service registry]
- wsdl address in backend R/3 system (error: Deserializing WSDL stream failed)
how should the logical destination be configured?
Thanks a lot
Vincenzo

Business Objects over Enterprise portals

Hi all,
Anyone done projects with Business Objects on SAP BW ???
Pls. let me know on related links.
what are the pros and cons of using Business Objects over using Enterprise Portals.
Points will be given for useful answers...
Thanks,

Hi Vaishali,
Please check this link, it may useful to u
http://help.sap.com/saphelp_nw04/helpdata/en/fc/f2ef41a0b99d39e10000000a155106/content.htm
Thanks, KR

Business Objects 4.0 Data Services | Error

I make connection between SAP ECC/ SAP HR and BusinessObject 4.0 Data Services (BODS)
Error calling RFC function to get table data: <RFC_ABAP_EXCEPTION-(Exception_Key: DATA_BUFFER_EXCEEDED, SY-MSGTY:E,SY-MSGNO:046,SY-MSGV1: Z_AW_RFC_READ_TABLE)>

Hi Usha,
Can you please check the message in event viewer?
You will ge the idea of the DLL which may be faulty or having problem.
just for your reference go through KB Article 1626736 - SAP BusinessObjects 4.0 Client Tools crash
Thanks,
Vivek

Enhancing web service tool to have further business objects and roots

Hi Gurus,
is it possible to enhance the web service tool in CRM 6.0, to have further business objects and root objects during the creation of a web service.
Currently, there are specific entries, but I want to have additional data in here to create a customer specific word template.
I have found out some tables, but I really do not know how to enhance them and if this is the correct way of adding additional business objects in the web service tool.
Mentioned tables are CRMV_WS_METHODS and CRMV_WS_OBJ_REL.
Has someone of you already did this? Helpful answers will be awarded.
ThanX
AleX

Does nobody have an idea? According to help.sap, only these objects are web service enabled:
-Business Transaction
-Business Partner
-Campaigns
-Case
-Counter
-Installed Base
-Marketing Segments
-Marketing Attributes
-Product
source: http://help.sap.com/saphelp_crm60/helpdata/en/71/365da2ab81488c8fc9b82fd8eb6f0f/content.htm
But what about other components, such as BuAg (Business Agreement) or ISUMD (IS-U Master Data and further data from the ERP system). These components are in the GenIL, e.g.
BUAG with implementation class CL_CRM_BUAG_IL1 or
ISUMD with implementation class CL_CRM_ISU_IL_MD
Is it necessary to use the Web Service Consumption Tool for creating BOL Objects, although the BUAG/ISUMD are already available in CRM?
If so, what must be exactly done with this Tool. Does anyone have experiences here and can provide me further information?
Thanx and regards
Alex
Edited by: Alexandro St. Torro on Nov 11, 2008 9:41 AM

SAP Cloud Application Studio Create Custom Web Service From Custom Business Object and Consume in External System

Hi Experts,
I have requirement to create custom business object and create Web Service for that and use in external system (SAP ECC / SAP CRM / Third Party).
1) Is it possible to create custom object web service and used in external system ?
2) When we create the Web service from custom business object what the necessary steps(action : Create , Read , Update) require?
3) Sample Scenario :
My Custom Business Object
businessobject Custom_Integration {
element EP_VAL1 : LANGUAGEINDEPENDENT_MEDIUM_Text;
element EP_VAL2 : LANGUAGEINDEPENDENT_MEDIUM_Text;
element IP_RES : LANGUAGEINDEPENDENT_MEDIUM_Text;
I have created the Web Service using this custom business object.
3) How i can use this web service in external system? what are the prerequisite steps in external system to consume this service in it?
Please anyone have idea about this how to do this and how to achieve this using SDK and custom business object.
Many Thanks
Mithun

Hello Mithun,
Does this section in the documentation help you:
SAP Cloud Applications Studio Help -> Developers Desktop -> Web Services
The entry "Task -> Create a Web Service" describes how to create a Web Service on your own BO
The entry "Task -> Test a Web Service" helps you how you can use it in a foreign tool / application.
HTH,
Horst

How to configure business objects web services

Hi can anyone tell me were can i find these web services in cmc, and how i need to configure these webservices.in order to talk externally with the java program.
my scenerio is, java program will kick off to send the parameters to the web services in business objects. The web services need to take those parameters from java and create a file and drop it locally or anywhere

Hi
Which version you are on?
if it is XI 3.x then, dswsbobje is the web application which is deployed on default tomcat, You can get the details of of all available web services by :http://BOEHOSTNAME:PORT/dswsbobje/services/listServices
Regards
Ashwini

Merge modules for Business Objects XI service pack 4

I am in the process of developing a deployment package in Installshield 2009 - Basic MSI Project. I tried adding the merge modules I downloaded earlier from the web page, http://support.businessobjects.com/downloads/runtime.asp
Currently I do not see this web page. It would be nice if you could tell me whether do we have a merge module for Crystal Reports XI service pack 4. If we have where from i can download them. Thank you

Thanks a lot for the immediate response. However, I am not using the crystal reports Version, R2 release.
I had actually installed Business Object XI and applied service pack 4 on it. I checked the version in Help->About. It is 11.0.0.
Also my environment is XP Sp2, Visual studio 2003 and Visual studio 6.0. I understand that R2 release is needed if the environment is Visual Studio 2005.
I would like to give a clear picture of the issue I work through.
After deploying the software in the client machine, I came to know that when client tried to print the embedded crystal report (.dsr file) from CrViewer,
1. Page set-up dialog bog gets displayed.
2. After clicking 'OK' button in the page set-up dialog box, nothing happens. It is suppose to bring print dialog.
I simulated this in my development machine (confirmed that Print dialog is is not getting displayed when 'OK' button is clicked from 'Page setup' dialog)
I researched and found out from some web page that if Business Objects XI is updated to Service pack 4, this issue gets resolved
So i applied service pack 4 in my dev. machine and tested the functionality by clicking 'OK' button. This issue is no more.
Next logical step is to propagate the sp4 changes to the installer. I searched for the merge modules corresponding to Business Objects XI - service pack 4. I could not locate it now.
I searched my backup folder, I located some previously downloaded merge modules downloaded from the web page, http://support.businessobjects.com/downloads/runtime.asp
I tried to include these merge modules and received an error message "Internal build error" . My research revealed that inclusion of the merge module, CrystalReports11_RDC_Reportengine.msm (43,306 Kb, 7/4/2007) throws "Internal build error" during compilation of MSI project in Installshield 2009.
Any idea, tips and help to resolve the issue would be appreciated. Thank you.

Business Objects XI R2 Launchpad issue

Hi All,
We just recently upgraded to Weblogic 9.2 and we are using Business Objects Enterprise XI R2 on the server. Everything was working fine on the previous version of Weblogic 8.1 SP4.
Scenario 1.
Open up new webpage with the launchpad and you click on Central Management Console Link then you ALT TAB back to the Launch Pad and Click InfoView Link you get an Error "From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1";
Scenario 2.
Open up new webpage with the launchpad and you click
on InfoView Link then you ALT TAB back to the Launch Pad and Click Central Management Console Link you get an Error "From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1";
Scenario 3.
Open up new webpage with the launchpad and you click
either InfoView Link or Central Management Console Link then you ALT TAB back to the Launch Pad and REFRESH the web page you get an Error "From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1";
Any help would be great in helping us solve this problem.
Thanks in advance
Rick
Edited by: Rick W Phillips on Sep 29, 2008 3:25 PM

Hi,
Cause of this issue :
Once the Job Server recieves the scheduled job and spawns a new child process, the child process is unable to complete the job. The child process constantly is waiting to load the job. Looking further into the log and specifically the startup script, the -port option was incorrectly used (-restart-port) and didn't allow the child process to bind to the correct port using the correct DNS name.
In Order to resolve this issue follow the steps given below..
1.Open CCM
2. Stop Server
3. Right Click Server and go to Properties
4. insert -port option in to command line, example below
ex. "
win2k3\C$\ProgramFiles\Business Objects\BusinessObjects Enterprise 11.5\win32_x86\JobServerFullClient.exe" -service -name win2k3.Desktop_IntelligenceJobServer -ns win2k3 -objectType CrystalEnterprise.FullClient -lib pp_procFC -jsTypeDescription "Desktop Intelligence Job Server" -maxDesktops 0 -restart -port win2k3.it.bo.example
5. Save setting and restart server.
Hope it helps.
Regards,
Sandeep Singh

Business Objects/ePortfolio

1. Several reports are receving a Malloc Error in Crystal.
2. Several reports are receiving Database Connection error or Failed to Open Connection error when scheduled in Business Object but the reports run fine in Crystal.
3. Several reports run successfully in Business Objects but export no data
Any advice on any of these issues would be greatly appreciated. Thanks.

Hi,
Cause of this issue :
Once the Job Server recieves the scheduled job and spawns a new child process, the child process is unable to complete the job. The child process constantly is waiting to load the job. Looking further into the log and specifically the startup script, the -port option was incorrectly used (-restart-port) and didn't allow the child process to bind to the correct port using the correct DNS name.
In Order to resolve this issue follow the steps given below..
1.Open CCM
2. Stop Server
3. Right Click Server and go to Properties
4. insert -port option in to command line, example below
ex. "
win2k3\C$\ProgramFiles\Business Objects\BusinessObjects Enterprise 11.5\win32_x86\JobServerFullClient.exe" -service -name win2k3.Desktop_IntelligenceJobServer -ns win2k3 -objectType CrystalEnterprise.FullClient -lib pp_procFC -jsTypeDescription "Desktop Intelligence Job Server" -maxDesktops 0 -restart -port win2k3.it.bo.example
5. Save setting and restart server.
Hope it helps.
Regards,
Sandeep Singh

Business Objects XI R2 - Oracle Stored Proc - Deski report failing

Business Objects XI R2
Hi All,
I have a stored proc created in Oracle 10 - see bottom for code
I run a deski report on iit - using it as a datasource. This works fine in Desktop Intelligence until I schedule the report from infoview - then I get the following error...
"Object failed to run due to an error while processing on the Job Server"
My other deski reports based on Universes are ok.
create or replace procedure test_PROC1
(Test_Rpt_Cur OUT SYS_REFCURSOR)
is
begin
open Test_Rpt_Cur FOR
SELECT ID, FIRSTNAME, LASTNAME
FROM test_table;
end test_proc1;

Hi,
Cause of this issue :
Once the Job Server recieves the scheduled job and spawns a new child process, the child process is unable to complete the job. The child process constantly is waiting to load the job. Looking further into the log and specifically the startup script, the -port option was incorrectly used (-restart-port) and didn't allow the child process to bind to the correct port using the correct DNS name.
In Order to resolve this issue follow the steps given below..
1.Open CCM
2. Stop Server
3. Right Click Server and go to Properties
4. insert -port option in to command line, example below
ex. "
win2k3\C$\ProgramFiles\Business Objects\BusinessObjects Enterprise 11.5\win32_x86\JobServerFullClient.exe" -service -name win2k3.Desktop_IntelligenceJobServer -ns win2k3 -objectType CrystalEnterprise.FullClient -lib pp_procFC -jsTypeDescription "Desktop Intelligence Job Server" -maxDesktops 0 -restart -port win2k3.it.bo.example
5. Save setting and restart server.
Hope it helps.
Regards,
Sandeep Singh

Business Objects housekeeping activities

Hi,
I would like to know the Business Objects housekeeping activities for a support project from the application point of view. Is there any check list that needs to be followed? The version that is being used is 3.1 SP3. Any help is appreciated.
Thanks,
Sukumar

Hi,
Cause of this issue :
Once the Job Server recieves the scheduled job and spawns a new child process, the child process is unable to complete the job. The child process constantly is waiting to load the job. Looking further into the log and specifically the startup script, the -port option was incorrectly used (-restart-port) and didn't allow the child process to bind to the correct port using the correct DNS name.
In Order to resolve this issue follow the steps given below..
1.Open CCM
2. Stop Server
3. Right Click Server and go to Properties
4. insert -port option in to command line, example below
ex. "
win2k3\C$\ProgramFiles\Business Objects\BusinessObjects Enterprise 11.5\win32_x86\JobServerFullClient.exe" -service -name win2k3.Desktop_IntelligenceJobServer -ns win2k3 -objectType CrystalEnterprise.FullClient -lib pp_procFC -jsTypeDescription "Desktop Intelligence Job Server" -maxDesktops 0 -restart -port win2k3.it.bo.example
5. Save setting and restart server.
Hope it helps.
Regards,
Sandeep Singh

Enable Business Objects in Enterprise into Services

Similar Messages

Maybe you are looking for