Enable Change log in tcod

Hi All,
I need to enable Change logs in CJ20n as it is available in VA02
CJ20n is an Project System module T-code.
Please its urgent.
Thanks & Regards,
Amit.

Actually, my problem is we changed USER0 field in AUFK table with our own data element, for USER0 we used Z_AUFUSER0 by replacing the existing AUFUSER0 data element, however, we forgot to check the checkbox "Change document" in the "Further Characteristics" tab of our custom data element.
Hope this helps.

Similar Messages

Enable Change logs in tcode

Hi All,
I need to enable Change logs in CJ20n as
it is available in VA02
CJ20n is an Project System module T-code.
Please its urgent.
Thanks & Regards,
Amit.

You can change the setting of the below transaction CJ20n by going to settings->options , where we have the option to change or display.
When you change the setting to 'change' mode then you can open a new project where the option of scheduling can be done for a new project.
Hope this is what you have asked for.

Enabling Change log in OUD 11gR2PS2

Hi Team,
We are trying to configure reverse LDAP sync between OIM and OUD. OIM has the reconciliation scheduler for user reverse sync. But this depends on change log parameter in OUD. We are trying to enable change log in OUD. But We see that change logs is enabled on enabling the replication topology in OUD. We have a stand alone server and we do not require replication topology. Can we still enable change log in OUD? We need it for updating user locked information from OUD to OIM.
Note: We are not performing OAM-OIM integration
Please provide us any helpful solutions.
Thanks,
Sunderson SJG

Hi,
Change log will only be enabled when you create a replication server. I understand that is an overhead, but that is how OUD is build. This is very well document within the oracle docs.
HTH.

Change Logs for TCODE -- FILE

Hi Friends,
    Please help me in finding the change logs for the TCODE FILE,
    i.e The changes made to the Logical paths
   I had tried Utilities---->change logs , but unfortunately i cannot find any changes logs
   But there are changes made to the logical paths in my system but i cannot see them in change logs
thanks
chandrasekhar j

rec/client is a profile parameter, you can view the settings in transaction RZ10. However I find program RSPARAM more useful, the report lists all system parameters with their default and altered value. Also if you double-click on a parameter you can get to the full help text for its meaning.
The parameter essentially switches on table change logging for configuration tables (based on the technical settings of the table) and has to be set before the changes are made.
Hope this helps.
Nick

Enable change logs for item level of Sales Document

Hi,
On transaction VA02, additional screen field (Booking Date) is added (& consequently 2 appends with date field in the tables VBAK & VBAP).
When this date is changed in the header, the corresponding dates are changed in the item level as well.
However, the change documents are created only for table VBAK (though item data is updated in VBAP also).
When the date is changed at the item level, the change logs are created for the corresponding field in table VBAP.
The data element has 'Change Document' checked.
How can I activate the change to be logged for the item level (VBAP), when the date is changed at header level (VBAK)?

Hi Nidhi,
Maybe set a breakpoint in include MV45AF0C_CHANGE_DOCUMENT_CREAT
Then check in UPDATE debug mode the value of upd_vbap and the contents of xvbap which are passed on to function VERKBELEG_WRITE_DOCUMENT .
This function creates the change documents based on the data changes.
I would have thought that since the date values are changed at item level as well when you only change it at the header, they should get a change document created automatically, since the dates must be in the XVBAP table (as their value is changed at the DB).
So I would compare the various internal tables for both scenarios (header change, item change) to determine their differences.
After this use one of the user-exits to populate the internal tables for the header scenario based on the values of the item scenario. I would feel this to be a last resort though, since something appears not to be working correctly (I think).
Hope this makes sense,
Robert

Change logs for tcode WE20 and MN04

Hi Gurus,
Good day.
Please help. does WE20 and MN04 generates change logs? If yes, please advice on how to check change logs of both transactions.
Thanks in advance.

I have never seen change logs for WE20.
MN04 is creation of conditions. as conditions usually stored in own tables, the change history needs to be activated for these tables via SE11 first.

Enable Change Log

Dear gurus,
I am not able to open the "change log". For each and every document the change log is disabled.
Its remains disabled even i browse back data.
Please provide me the solution.
Thanks in advance.
Regards,
Ashish Tambe

Dear sir,
My meaning of Its remains disabled even i browse back data. is i cannot open change log even i have opened any document not in add mode but a existing also.
I have confirmed that we are having professional licenses of SAP B1 and i am using MANAGER id which is a superuser.
But still problem exists.
As you stated,problem with history table may be the reason, but i'll be thankful if you provide me solution how to check integrity or errors of history table?
Regards,
Ashish

PM Order Change logging / OIOE

Hello,
Does anybody know if it is possible to enable change logging for PM orders for the text description field? (KTEXT). I understand that overall, logging is governed by t-code OIOE, however it appears that only certain elements are logged from what I have found. Perhaps I am looking in the wrong place, or perhaps this level of logging is not possible?
Basically, I want to be able to look at a specific order number, and be able to see a log of all changes made to the order including everything from status changes to the data that was changed. Is this possible?
From within the order itself (IW33) looking at the 'Changes' as well as 'Action Log' don't quite tell the entire story.
Anybody have any ideas?
Thanks!

Fricis,
Change document is enabled for the KTEXT field on the order header.Not sure why you arent able to see it on the chnage document log.
OIOE transaction does control capturing of changes for certain elements. The field that these elements contain is governed by the change document structures associated to the objects (Transaction :SCDO. ex: ORDER is the Change document object for PM order and Networks). The data element of the fields associated to the structure inturn control whether changes should be captured or not.For order header short text KTEXT, the data element associated to it AUFTEXTwhich does have the change document activated. You could switch on change document(It will result in a modification ) for fields which arent active for logging changes on tables which are already in the change documnet object.
Custom report is probably your only solution to access all the change documents for the order (Order header, operation, header status, operation status, material status etc) in a single screen.You could probably trying copying the action log logic and expanding on the same for everything you need.
Hope it helps.
Regards
Narasimhan

Change Log not being created

Hello every one
I have implemented the customer master enhancement using the baddis : 'CUSTOMER_ADD_DATA_CS' and 'CUSTOMER_ADD_DATA' , scenario is that, I have added a new tab, to customer master screen and the new screen under that tab has 4 fields, those 4 fields are appended into KNA1 table using append structure.
hence my four fields on screen are:
kna1-zzappno
kna1-zzappdate
kna1-zzfrmno
kna1-frmdate
, the problem I am facing is that, system is not logging any changes in any of the field of the screen, infact when i requested change document from menu, it gives the error: place the cursor on data field, on debugging i came to know that, in the method 'GET_FIELDNAME_FOR_CHANGEDOC' , E_FIELDNAME parameter is coming empty, I tried to pass the value of the field at run time through debugger, which although removed the said error, but returned the message that no field change document exist for the field, where as field's data has been previously changed, now I cannot figure out, how to enable change log recording on the fields which i have added as an enhancement to customer master screen (XD01 , XD02 etc.)..
any help in this regard would of high appreciation,,,
thank you.

Hi,
Change document are only created if the fields is set for change document.
This you set at DATA ELEMENT level. If you go to any table, take any field, double click the data element of that field. On the data element displat screen on the definition tab, you will see a block "Attribute". In this "Attribute" block, there is a field call "Change Document".
The change documents for table fields are only created if this "change document" flag is set. Check the documentation of this flag ( change document ) for more information.
Regards,
RS

Where to check/enable for log keeping track of transport rule actions?

I have implemented some transport rules to "journal" all emails from specific clients as per this
thread.
So there are 4 transport rules to capture all those email:
1. email from Clients (incoming / FROM)
1.1 from users outside the organization.
1.2 sent to member of AD Group
1.3 sent to users inside the organization.
1.4 where the from address contains "domain of our clients list"
1.5 BBC to capture mailbox
2. email to Clients (outgoing/ TO)
2.1 from member of AD Group
2.2 from users inside the org
2.3 sent to users outside the organization.
2.4 where the to address contains "domain of our clients list"
2.5 BBC to capture mailbox
3. email to Clients (outgoing/ CC)
3.1 from member of AD Group
3.2 from users inside the org
3.3 sent to users outside the organization.
3.4 where the cc address contains "domain of our clients list"
3.5 BBC to capture mailbox
4. email to Clients (outgoing/ BCC)
4.1 from member of AD Group
4.2 from users inside the org
4.3 sent to users outside the organization.
4.4 where the bcc address contains "domain of our clients list"
4.5 BBC to capture mailbox
The symptoms are that while I am seeing by selecting random emails that everything seem to run fine (rule filtering from transport does get incoming and outgoing messages to that “capture” mailbox) and I tested this fine with some test emails
in different domains.
Somehow I am no getting the results I want. With business sending some test sets I should be finding in that mailbox, I do not find everything. Some of the email that apparently would logically be captured are not. Is business lying about the test sets they
send? I don’t think so and the fact is that I seem to be missing emails.
Anyhow my questions to you are the following:
1. Do you know of any logging done by the transport server to check on matches of the filters?
2. I am using outside and inside condition in the rules. Are they what I think they are?
I hope you can help. I think I am doing this right, but I cannot verify the process 100%. Some logs or additional information would help. Or perhaps I am not using the conditions properly.
Thank you in advance.
and BTW the environment is Exchange 2007

Based on my research, there is no specific log to match the filters. During the mail flow, only SMTP log and Message Tracking log can record the message information.
You can check the two logs if needed. For more information, please refer to the following steps.
Enable Message tracking log
1. Open the Exchange Management Console.
2. In the console tree, expand Server Configuration, and select Hub Transport.
3. In the action pane, click the Properties link that is directly under the server name.
4. In the Properties page, click the Log Settings tab.
5. In the Message tracking log section, Select Enable message tracking log to enable message tracking.
6. Click Apply to save changes and remain in the Properties page, or click OK to save changes and exit the Properties page.
Enable SMTP Log
1. In the console tree, expand Organization Configuration, and select Hub Transport.
2. In the action pane, click on Sender Connectors and right click on send connector and then click on properties.
3. Select “Verbose” under “Protocol logging level” and then click ok.
Then, you can find the logs from the following location.
Collect Message Tracking Log
On the Exchange server, go to directory “c:\program files\Microsoft\exchange server\TransportRoles\Logs\Message Tracking”
Collect SMTP log
Open the folder on the Hub Server,: C:\Program Files\Microsoft\Exchange Server\TransportRoles\Logs\ProtocolLog\SmtpSend.
Thanks.
Novak
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Change logs missing for OB52

Hi Experts
We have a peculiar problem where change logs are missing for some of the transactions made through OB52 for modifying FI posting periods.
I vefired that change logging has been correctly activated for table T001B. Though change logs are displayed for most of the transactions through SCU3 or in table DBTABLOG, logs will be missing for some records.
Can you please let us know what could be the possible scenarios where change logs are not recorded for OB52 or table T001B even though logging has been activated.
Any inputs on this will be very helpful.
Regards,
Santosh

try log on tcode S_ALR_87003642

Change logs for Z table.

Hi All,
I am trying to fetch the old value and new value for the z table field.Change log is activated for the Z table. but i dont know how to fetch the change logs.
SCU3 is the standard transaction to see the change logs for all the tables.
Is there any table where the change logs values are maintained?
Does anyone know how to get the change log value?
Thanks in advance.
Regards,
Amruta.

Hello,
If for a specific set of tables no change documents are triggered by SAP you can always setup your own Change Document Object with transaction SCDO.
Of course you need to be careful with this transactions (how big is the table data, how many changes, etc...).
Table logging is something else, they are stored in table DBTABLOG and can be analysed via SCU3.
For table logging you need extra system parameters to be set, they are explained in SAP Note:
Note 1916 - Logging table changes in R/3
Pay attention with table logging because a lot of tables are logged in DBTABLOG once you activate the parameter, this can have a major impact on performance.
To have an idea what other tables will be logged, check tcode SE16 on table DD09L and put an 'X' in field PROTOKOLL, result will be thousands of tables.
In your specific scenario I think it is best you go for the change documents with SCDO.
Wim Van den Wyngaert

New entries in table TSTC not capturing in scu3 change logs

Hi ,
We have TSTC table log enabled.
New Entries which comes through transport in the table TSTC are not capturing in change logs.
We have created a new Z T-code and transported it to Quality and then to Production.
But in the change logs of the tbale TSTC it is not captured both in quality and Production.
In the table TSTC t-code is present.
But the change log for the table doesnot show any new entry created.
In development change log of TSTC, the change is present but in Quality and Production it is not present.
Development client : 400
Quality Client : 600
Production Client : 600
Can any one spill some beans on it...
Thanks & Regards
Kiran

You need to add "recclient = ALL" (or same client value as "rec/client" profile parameter in RZ10) to the transport profile as well in the STMS.
Search SAP notes and the forum here for "recclient" (without "/")
Cheers,
Julius

Where to see the images other than change log table

Dear all,
How to view images for extraction's (example Generic ) in DSO without using Change log table.
With Regards,
Baskaran

Hi,
There is no other option other than change log table to view the images.
in PSA..we will get only raw data..i.e...its non other than the data how its posted in source sytem.we can say..this is only copy of source sytem data.
after PSA,if the datasource is DELTA enabled(which can sustain NEW or CHANGED records-here only we get concept of IMAGES),we have to load this data only to DSO.from there after activation of the data,the data can be updated to further data targets only from CHANGE LOG table which can maintain images.
Even further targets are also DSOs,we will have to load from this DSO only.so we can see images only in change log table.
hope this is clear for you.
Regards
Ramsunder

USB Keyboard/Mouse do not function in Bios (Bios Change log too)

I have 1.7 and the system seems fairly stable, a few BSOD's occasionally and it normally seems to occur when the system is idle. I can work on that, but now when I boot my usb keyboard will not function for the EFI/Bios. I have a Old PS2 keyboard working for now but was hoping there is some work around that someone might now. Everything is enabled in the Bios and I even disabled, saved, re- enabled, saved.
Saving (F10) still causes the system to power down, but I can live with that.
Now for the BIOS, can we get a change log to determine what issues are being resolved with these update? I have 1.8b7 downloaded but last update I lost my Raid array so I want to see change logs before a possible rebuild.
Lastly I am used to new hardware having issues especially with OCing, but the EFI/BIOS seems extremely temperamental. First MSI board and my work is on the road a lot so I am hoping to get some of this fixed soon.
Thanks for any advice

Quote
a few BSOD's
What are the Stop: error codes? 124? 050?
Quote
Now for the BIOS, can we get a change log to determine what issues are being resolved with these update? I have 1.8b7 downloaded but last update I lost my Raid array so I want to see change logs before a possible rebuild.
https://forum-en.msi.com/index.php?topic=144655.0

Enable Change log in tcod

Similar Messages

Maybe you are looking for