Enable/Disable Rows In table Control

I m getting material number for particular material doc. if i get N rows in output i want to disable all other rows of table control.
Moderator message: please search for previous solutions to similar problems before asking.
Edited by: Thomas Zloch on Nov 20, 2010 7:24 PM

Hi,
In PBO, Loop at your table control lines, create a module inside it and use
LOOP AT SCREEN.
SCREEN-INPUT = '0'.
MODIFY SCREEN.
ENDLOOP.
Regards,
Senthil

Similar Messages

Enable/disable rows of Table control

Hi,
I am showing n number of records in a table control. These number of records may wary depending on a X condition.
I have also created a button with which user can create a new record from the same tabkle control and t/f back that new value in the itab.
Now, when table control is displayed it WILL have certain records in it. I want those records to be in the INPUT = '0' state and rest of the table control lines should be INPUT = '1'.
I am trying....
PROCESS BEFORE OUTPUT.
MODULE status_0101.
LOOP AT ts_store WITH CONTROL tabc CURSOR tabc-current_line.
module change_scr_attr.
ENDLOOP.
module change_scr_attr output.
CASE ok_code.
    WHEN 'DISP'.
   Displays all the records in INPUT = '0' state.
      LOOP AT tabc-cols INTO cols WHERE index GT 0.
        cols-screen-input = '0'.
        MODIFY tabc-cols FROM cols INDEX sy-tabix.
      ENDLOOP.
    WHEN 'CREA'.
     if *     * disable the CDC Column
    * disable Delete shortcut.
     REFRESH ts_store.
     LOOP AT tabc-cols INTO cols WHERE index GT 0.
         IF ts_store-zstcdc_store IS INITIAL.
         cols-screen-input = '1'.
       ELSE.
         cols-screen-input = '0'.
       ENDIF.
       screen-active = '1'.
       MODIFY tabc-cols FROM cols INDEX sy-tabix.
     ENDLOOP.
     LOOP AT tabc-cols INTO cols WHERE index GT 0.
       IF cols-screen-input = '0'.
         cols-screen-input = '1'.
       ELSEIF cols-screen-input = '1'.
         cols-screen-input = '0'.
       ENDIF.
       MODIFY tabc-cols FROM cols INDEX sy-tabix.
     ENDLOOP.
     LOOP AT SCREEN.
       IF ts_store-zstcdc_store IS INITIAL.
         screen-input = '1'.
       ELSE.
         screen-input = '0'.
       ENDIF.
       MODIFY SCREEN.
     ENDLOOP.
ENDCASE.
endmodule.                 " change_scr_attr OUTPUT
I have waded thru few threads but I dont get it.
Plz suggest!!
~Sid
"Max points are assured"

Hi....
   Actually.... our table control.. is by defalut make disable the empty rows... which are not having data...
because... the process of dispaly table control like this...
1.Fetching the records from database into one itab...
2.Capturing the itab lines with following sytax...in the PBO module..
   > MODULE <TC>_CHANGE_TC_ATTR OUTPUT.
   > DESCRIBE TABLE ITAB LINES <TC>-lines.
   > ENDMODULE.
with this you are sizing the table control as for itab size...
3. Filling or Attaching the itab with Table control...
> LOOP AT   ITAB
>      WITH CONTROL TC
>      CURSOR TC-CURRENT_LINE.
>   MODULE TC_GET_LINES.
> ENDLOOP.
So in above module we can fill data and can disable and enable rows of certain condition...
So the condition aplleid rows should be disable and remaining enable.. and important thing is empty rows should be defaultly disabled mode...
But.. Here you want to appear empty rows should be in enable mode...
For that in second step.... modify the code like this....
   > MODULE <TC>_CHANGE_TC_ATTR OUTPUT.
   > DESCRIBE TABLE ITAB LINES <TC>-lines.
   > <TC>-lines = <TC>-lines + 4.
   > ENDMODULE.
So with this you can get 4 empty and enable lines...
and if u are not having 2nd step in ur coding.. just write it now.. it will solve ur problem...
Pleae get back to me if you want any further clarification...
Thanks,
Naveen.I
Edited by: Naveen Inuganti on Jun 30, 2008 5:03 PM
Edited by: Naveen Inuganti on Jun 30, 2008 5:50 PM

Disable rows in table control

Hi,
I'm trying to disable a row... not a column in a table control so the user can't change it, however I'd like the previuos and next rows in the table control to be enabled for modifications. I know it sounds simple, but i havén't been able to do it, anyone knows how to?

Hi,
Disable all the columns for that row..
Example
PROCESS BEFORE OUTPUT.
LOOP AT ITAB WITH CONTROL TC.
MODULE DISABLE_ROW.
ENDLOOP.
MODULE DISABLE_ROW.
Check for the conditions where you have to disable the row.
if the conditions are satisifed.
IF CONDITION IS SATISFIED.
   LOOP AT SCREEN.
     SCREEN-INPUT = '0'.
     MODIFY SCREEN.
   ENDLOOP.
ENDIF.
The above will disable all the columns in that row..
ENDMODULE.
Thanks,
Naren

Table Control Enable / Disable Row

Hi,
I have a table control with 6 columns also screen contains some header input fields.
Out of 6 columns first two columns are disabled.
Depending on value entered in certain field in the header I fill the table control. e.g. if the value in certain field is X, table control is filled with say 15 rows, if value is Y, table control is filled with say 5 rows.
Now my requirement is only those rows which are filled should be disabled. i.e. If user chooses value Y then all rows after 5 should be input enabled.
But since I have disabled the columns statically complete column remains disabled.
Can anybody tell me How to enable a particular row in table control ?
Thanks n Regards,
Nitin
Message was edited by: Nitin Pawar

Say your Table control in TABCON.
You screen structure is SC_ITAB.
Your internal table is ITAB.
In PBO of screen
   LOOP AT ITAB INTO SC_ITAB WITH CONTROL TABCON.
    module SUPPRESS_ROW.
ENDLOOP.
In ABAP Module
MODULE SUPPRESS_ROW.
IF SC_TAB IS INITIAL.
LOOP AT SCREEN.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDLOOP.
else.
LOOP AT SCREEN.
   SCREEN-INPUT = 1.
   MODIFY SCREEN.
ENDLOOP.
endif.
This will help you suppress at row level.
You may change the if condition to suit your need .
Cheers
ENDMODULE.

Disable Vertical scroll but enable Page down in Table control for BDC

Hello All
In my 4.6C sysem , i had enabled Scroll bar in table control by populating TABC-lines = <No of records>...Then when i try to capture the BDC recording of this , then the scrolling event is not captured in BDC , as we all know.....
So i put few buttons on the application bar as NEXT PAGE, NEXT LINE , PREV PAGE n PREV LINE...and i did the scrolling by writing the code manually in PAI...and that is getting captured in BDC so my problem is partially solved...
Now as u see..i have default working Scroll bar on my T.C..also i have my buttons on the application bar....i want to get rid of the vertical scrolling....so now i am NOT populating the TABC-lines field...But as soon as i do this , my buttons stopped also working...Any idea how to get rid of this ?
In short when i don't write : TABC-lines = no_of_records .....to remove vertical scroling.......my manual scrolling mechanism also getting disabled..
Is it possible to remove only vertical scrolling ?
Thanks in advance .
Nilesh

No reply from any one ???

How to disable fields in Table control???

Hi
How to disable fields in Table control??? I want to disable particular row in table control when enter datas are correct.lets take as example ME41 or ME51 table control.
Can anyone tell how to do disable in this table control
Points will be rewarded if its helpful.
Thanks
senthil

If you want to disable the row then you can use
in pbo module create a module in side loop,
loop at itab with control tc.
module change_screen.
endloop.
in module,,,,,
loop at screen.
if condition.
screen-input = 0.
modify screen.
endif.
endloop.
Regards
Vijay

How to delete the row in table control with respect to one field in module pool programming?

Hi,
Can I know the way to delete the row in table control with respect to one field in module pool programming
Regards
Darshan MS

HI,
I want to delete the row after the display of table control. I have created push button as delete row. If I click on this push button, the selected row should get deleted.
I have written this code,
module USER_COMMAND_9000 input.
DATA OK_CODE TYPE SY-UCOMM.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
     WHEN 'DELETE'.
        LOOP AT lt_source INTO ls_source WHERE mark = 'X'.
            APPEND LS_SOURCE TO LT_RESTORE.
            DELETE TABLE LT_SOURCE FROM LS_SOURCE.
            SOURCE-LINES = SOURCE-LINES - 1.
        ENDLOOP.
But I'm unable to delete the selected rows, It is getting deleted the last rows eventhough I select the other row.
So I thought of doing with respect to the field.

How to get all the index of "selected rows" in table control?

Hi Gurus,
I have a table control, wherein I need to get selected row so that I can get its respective TABIX.
I know that the event for capturing selected row is in PAI.
I also ensure that the w/ selColumn name in my screenpainter is exactly the same as my declaration in ABAP.
TOP INCLUDE
YPES: BEGIN OF Y_ZQID_CHECK,
        IDNUM           TYPE ZQID_CHECK-IDNUM,
        WERKS           TYPE ZQID_CHECK-WERKS,
        MATNR           TYPE ZQID_CHECK-MATNR,
        LICHA           TYPE ZQID_CHECK-LICHA,
        LIFNR           TYPE ZQID_CHECK-LIFNR,
        ECOA_S          TYPE ZQID_CHECK-ECOA_S,
        ID_STAT         TYPE ZQID_CHECK-ID_STAT,
        ID_DATE         TYPE ZQID_CHECK-ID_DATE,
        FLAG_MAILCOA(1) TYPE C,
        MARK(1)         TYPE C, "Name of w/ SelColumn in ScreenPainter: T_ZQIDCHECK_DISCH-MARK
       END   OF Y_ZQID_CHECK.
DATA: T_ZQIDCHECK_DISCH TYPE STANDARD TABLE OF Y_ZQID_CHECK WITH HEADER LINE.
PAI
PROCESS AFTER INPUT.
* MODULE USER_COMMAND_9004.
LOOP AT T_ZQIDCHECK_DISCH.
MODULE READ_TC_DISCH .
ENDLOOP.
module READ_TC_DISCH input.
DATA: W_LINE_SEL TYPE SY-STEPL,
              W_TABIX    LIKE SY-TABIX.
GET CURSOR LINE W_LINE_SEL.
W_TABIX = TC_ID_ONLY-TOP_LINE + w_LINE_SEL - 1.
MODIFY T_ZQIDCHECK_DISCH INDEX TC_ID_ONLY-current_line.
If I am selecting single row, I can properly get the selected index via debug.
BUG:
When I'm selecting multiple rows in table control, only the last row is always being read inside the loop of my table control.
Please see the screenshot.
[url]http://img268.imageshack.us/img268/5739/tcselectedrows.jpg[url]
Notice in the debug screenshot, even if it's just in the 1st loop of table control, it automatically gets the 4th table control index, instead of the 2nd one.
Helpful inputs will be appreciated.
Thanks.
Jaime
Edited by: Jaime Cabanban on Dec 9, 2009 3:16 PM

Hi,
Are you sure that you have selected multiple line for tablecontrol in the property window of the tablecontrol.
Flowlogic.
LOOP WITH CONTROL TC_01.
     Module Get_Marked.
ENDLOOP.
Module Pool
Module Get_Marked.
read the data from the internal table where mark = 'X'.
this should give you only selected records.
Endmodule.
Kindly check the tablecontrol property.
Regards,
Ranjith Nambiar

Unable to delete a row in table control

Hi,
I'm unable to delete a row in table control.
I have defined a selection column for my table control but it is not getting value 'X' when i'm selecting a row for deletion.
Also, when I press enter, some of the columns in table control are getting initialized. I'm passing these values to the internal table along with other columns.
Please help.
Regards,
Manasee
Message was edited by: Manasee Chandorkar

hi,
kindly chk this.
PROCESS BEFORE OUTPUT.
MODULE status_9010.
LOOP WITH CONTROL tab_control.
MODULE move_data_to_table.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP WITH CONTROL tab_control.
MODULE move_data_from_table.
ENDLOOP.
*& Module move_data_to_table OUTPUT
This is to move the data from the internal table to the table control
MODULE move_data_to_table OUTPUT.
This is to move the data from the internal table to the table control
zmpets_mode-modecode,zmpets_range-rangeid,zmpets_servfacto-factor are column name of table control
READ TABLE int_factor INDEX tab_control-current_line.
IF sy-subrc = 0.
zmpets_mode-modecode = int_factor-modecode.
zmpets_range-rangeid = int_factor-rangeid.
zmpets_servfacto-factor = int_factor-factor.
ENDIF.
ENDMODULE. " move_data_to_table OUTPUT
*& Module move_data_from_table INPUT
Date is moved from the table control to the Internal Table
MODULE move_data_from_table INPUT.
To move the data from the table control to internal table 'INT_FACTOR'.
int_factor-modecode = zmpets_mode-modecode.
int_factor-rangeid = zmpets_range-rangeid.
int_factor-factor = zmpets_servfacto-factor.
int_factor-chk = line.
*here if the data is there, it will modify
MODIFY int_factor INDEX tab_control-current_line.
IF sy-subrc NE 0. "data not exixting in table control . ie new data, then append it
APPEND int_factor.
CLEAR int_factor.
ENDIF.
ENDMODULE. " move_data_from_table INPUT
*delete a line from table control
MODULE user_command_9010 INPUT.
CASE sy-ucomm.
When an entry is deleted, and the entry is removed from the table
control.
    WHEN 'DELETE'.
      PERFORM f_del_frm_tab_cntrl.
ENDCASE.
ENDMODULE.
FORM f_del_frm_tab_cntrl .
LOOP AT int_factor WHERE chk = 'X'.
    DELETE int_factor WHERE chk = 'X' .
    CONTINUE.
ENDLOOP.
CLEAR int_factor.
ENDFORM.
for any clarifiaction pls mail me.
pls reward points, if this helped u.
regards,
anversha.
[email protected]
Message was edited by: Anversha s

How to select perticular row in table control for BDC

Hi all
I want to select perticular row in table control for deletion through BDC. My transaction is CA02, My input is material no and plant , then it display table control with work center. Now i want to select W999 cost center and delete through BDC.
Please Suggest me. it urgent.
Thanks& Regards,
RP

Hi all
I want to select perticular row in table control for deletion through BDC. My transaction is CA02, My input is material no and plant , then it display table control with work center. Now i want to select W999 cost center and delete through BDC.
Please Suggest me. it urgent.
Thanks& Regards,
RP

How do I deselect a row in table control on scrren?

Hello All:
How do I write the code to deselect a row in table control on a screen? This is in dialog programming.
Thanks.
Mithun

I thought that the descriptions given in the Help are clear.
The ADDRESS function constructs a cell address string from separate row, column, and table identifiers.
ADDRESS(row, column, [type], [style], [table])
row: The row number of the address.
column: The column number of the address.
I dropped the comments about type, style and table as I don't use them here.
=IF(ISBLANK(INDIRECT(ADDRESS(ROW(),1))),"",INDIRECT(ADDRESS(ROW(),2))*INDIRECT(A DDRESS(ROW(),3)))
INDIRECT(ADDRESS(ROW(),1))
returns the contents of the cell whose row is the same than the one containing the formula \[the row number is given by ROW()] and whose column is the 1st one)
INDIRECT(ADDRESS(ROW(),2))
returns the contents of the cell whose row is the same than the one containing the formula \[the row number is given by ROW()] and whose column is the 2nd one)
INDIRECT(ADDRESS(ROW(),3))
returns the contents of the cell whose row is the same than the one containing the formula \[the row number is given by ROW()] and whose column is the 3rd one)
In short, when the formula is applied in row 9 it behaves like:
=IF(ISBLANK(A9),"",B9*C9)
The long syntax is required to be able to enter it only once in the header cell as described in the Help and in the PDF User Guide in a chapter entitled "Applying a Formula Once to Cells in a Column or Row".
As we want to use such a formula, it would be odd to destroy its ability using a different formula in a standard bottom row.
More, in a footer row, we may use shorter formulas than in other rows.
In a standard row 10 we would have to write =SUM(D2:D9)
in a footer row we enter only =SUM(D) which add the contents of every standard cells of the column D.
This feature is also described in the named resources.
Yvan KOENIG (from FRANCE vendredi 3 octobre 2008 18:21:13)

BDC : to select different rows in table control

Hi,
I have to fill many rows in table control and want to select different row one by one in increasing order which rows are filled in BDC.
Can anybody suggest me with coding...
thanks
naresh

Hi ,
I am attaching sample code for BDC transaction code is : FV11 , This code is also contains poage down concepts . By using this page down concept you can add number of item fields
Program Name        : ZFV11_NEW
Program Description : To Upload Condition Records-FV11
Author              : Jagadish
Start Date          : 11/06/2007
REPORT zfv11
       NO STANDARD PAGE HEADING LINE-SIZE 255.
   DO NOT CHANGE - the generated data section - DO NOT CHANGE    ***
If it is nessesary to change the data section use the rules:
1.) Each definition of a field exists of two lines
2.) The first line shows exactly the comment
      '* data element: ' followed with the data element
      which describes the field.
      If you don't have a data element use the
      comment without a data element name
3.) The second line shows the fieldname of the
      structure, the fieldname must consist of
      a fieldname and optional the character '_' and
      three numbers and the field length in brackets
4.) Each field must be type C.
Generated data section with specific formatting - DO NOT CHANGE ***
TABLES : t100.
DATA: BEGIN OF record OCCURS 0,
data element: KSCHA
        kschl(004),               "Condition Type
data element: SELKZ_LIST
      selkz(001),
data element: WERKS_D
        werks(004),               "Plant
data element: ELIFN
        lifnr(010),               "Vendor
data element: MATNR
        matnr(018),               "Material No.
data element: KBETR_KOND
        kbetr(016),               "Amount
data element: KODATAB
        datab(010),               "Condition Validity Date from
data element: KODATBI
        datbi(010),               "Condition Validity To
data element: MWSKZ
        mwsk1(002),
      END OF record.
DATA : BEGIN OF it_new OCCURS 0,                    " Internal Table for Header Data
       kschl(004),
       werks(004),
       lifnr(010),
       END OF it_new.
DATA : BEGIN OF it_item OCCURS 0,                  " Internal table for Item Data
      werks(004),
      lifnr(010),
      matnr(018),
      kbetr(016),
      datab(010),
      datbi(010),
      mwsk1(002),
      END OF it_item.
DATA : cnt(2) TYPE n,
       fld(25) TYPE c.
TYPE-POOLS: truxs.
DATA: it_raw TYPE truxs_t_text_data.
DATA : n TYPE n.
DATA:
     BEGIN OF t_data OCCURS 0,
           data TYPE string,
     END   OF t_data.
DATA:BEGIN OF it_mess OCCURS 0,
msgtyp(5),
   lms(200),
   msgv1(50),
    END OF it_mess.
DATA : p_mode    TYPE c.
DATA:it_msgtab TYPE STANDARD TABLE OF bdcmsgcoll WITH HEADER LINE,
   it_msgtab1 TYPE STANDARD TABLE OF bdcmsgcoll WITH HEADER LINE.
DATA : l_mstring(150).
DATA : BEGIN OF bdcdata OCCURS 0.
        INCLUDE STRUCTURE bdcdata.
DATA: END OF bdcdata.
PARAMETERS : p_file1 LIKE rlgrap-filename.
INITIALIZATION.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
PERFORM file_selection.
PERFORM data_upload.
PERFORM table_control.
LOOP AT it_new.
    REFRESH bdcdata.
    PERFORM bdc_dynpro      USING 'SAPMV13A' '0100'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RV13A-KSCHL'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'RV13A-KSCHL'
                                  it_new-kschl.
    PERFORM bdc_dynpro      USING 'SAPLV14A' '0100'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RV130-SELKZ(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=WEIT'.
    PERFORM bdc_dynpro      USING 'SAPMV13A' '1363'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'KONP-KBETR(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'KOMG-WERKS'
                                  it_new-werks.
    PERFORM bdc_field       USING 'KOMG-LIFNR'
                                  it_new-lifnr.
DATA: "X(5) TYPE N,
         N(5) TYPE N.
   N = 0.
   LOOP AT it_item.
     N = N + 1.
   ENDLOOP.
   "X = 1.
   CNT = 1.
   DO N TIMES.
     IF CNT > 19.
       perform bdc_field       using 'BDC_OKCODE' 'KOMG-MATNR(01)'.
       perform bdc_field       using 'BDC_OKCODE' '=P+'.
       PERFORM bdc_dynpro      USING 'SAPMV13A' '1363'.
       CNT = 1.
     ENDIF.
    cnt = 1.
    LOOP AT it_item WHERE werks EQ it_new-werks AND lifnr EQ it_new-lifnr . "FROM x TO x.
      CONCATENATE 'KOMG-MATNR(' cnt ')' INTO fld.
      PERFORM bdc_field USING fld it_item-matnr.
      CONCATENATE 'KONP-KBETR(' cnt')' INTO fld.
      PERFORM bdc_field USING fld it_item-kbetr.
      CONCATENATE 'RV13A-DATAB(' cnt ')' INTO fld.
      PERFORM bdc_field USING fld it_item-datab.
      CONCATENATE 'RV13A-DATBI(' cnt ')' INTO fld.
      PERFORM bdc_field USING fld it_item-datbi.
      CONCATENATE 'KONP-MWSK1(' cnt ')' INTO fld.
      PERFORM bdc_field USING fld it_item-mwsk1.
      cnt = cnt + 1.
      if cnt = 20.
        perform bdc_field       using 'BDC_OKCODE' 'KOMG-MATNR(19)'.
        perform bdc_field       using 'BDC_OKCODE' '=P+'.
        PERFORM bdc_dynpro      USING 'SAPMV13A' '1363'.
        CNT = 1.
       endif.
CLEAR it_item.
    ENDLOOP.
   ENDDO.
    PERFORM bdc_dynpro      USING 'SAPMV13A' '1363'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'KONP-MWSK1(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=SICH'.
    CALL TRANSACTION 'FV11' USING bdcdata MODE 'A'
                                        UPDATE 'S'
                                       MESSAGES INTO it_msgtab.
    CLEAR bdcdata[].
    PERFORM error.
ENDLOOP.
       Start new screen   -Subroutine     for screen s                                      *
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro   = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM.                    "BDC_DYNPRO
       Insert field        -Subroutine   for field s                                         *
FORM bdc_field USING fnam fval.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDFORM.                    "BDC_FIELD
*&      Form file_selection
FORM file_selection .
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = syst-cprog
      dynpro_number = syst-dynnr
      field_name    = 'P_FILE1'
    IMPORTING
      file_name     = p_file1.
ENDFORM.                    " file_selection
*&      Form data_upload
FORM data_upload .
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
   EXPORTING
    I_FIELD_SEPERATOR        =
       i_line_header            = 'X'
       i_tab_raw_data           = it_raw
       i_filename               = p_file1
     TABLES
       i_tab_converted_data     = record
    EXCEPTIONS
       conversion_failed        = 1
       OTHERS                   = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " data_upload
*&      Form error
FORM error .
LOOP AT it_msgtab.
    IF it_msgtab-msgtyp = 'E'.
      SELECT SINGLE * FROM t100 WHERE sprsl = it_msgtab-msgspra
                                AND   arbgb = it_msgtab-msgid
                                AND   msgnr = it_msgtab-msgnr.
      IF sy-subrc = 0.
        l_mstring = t100-text.
        IF l_mstring CS '&1'.
          REPLACE '&1' WITH it_msgtab-msgv1 INTO l_mstring.
          REPLACE '&2' WITH it_msgtab-msgv2 INTO l_mstring.
          REPLACE '&3' WITH it_msgtab-msgv3 INTO l_mstring.
          REPLACE '&4' WITH it_msgtab-msgv4 INTO l_mstring.
        ELSE.
          REPLACE '&' WITH it_msgtab-msgv1 INTO l_mstring.
          REPLACE '&' WITH it_msgtab-msgv2 INTO l_mstring.
          REPLACE '&' WITH it_msgtab-msgv3 INTO l_mstring.
          REPLACE '&' WITH it_msgtab-msgv4 INTO l_mstring.
        ENDIF.
        CONDENSE l_mstring.
        it_mess-msgtyp = it_msgtab-msgtyp.
        it_mess-lms = l_mstring.
        it_mess-msgv1 = it_msgtab-msgv1.
        APPEND it_mess.
       WRITE: / it_msgtab-msgtyp, l_mstring(150).
      ELSE.
       WRITE: / it_msgtab.
        it_mess-msgtyp = it_msgtab-msgtyp.
        it_mess-lms = l_mstring.
        it_mess-msgv1 = it_msgtab-msgv1.
        APPEND it_mess.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDFORM.                    " error
*&      Form table_Control
FORM table_control .
SORT record BY lifnr matnr.
LOOP AT record.
    ON CHANGE OF record-lifnr.
      MOVE-CORRESPONDING record TO it_new.
      APPEND it_new.
    ENDON.
    MOVE-CORRESPONDING record TO it_item.
    APPEND it_item.
ENDLOOP.
ENDFORM.                    " table_Control
Reward if useful
Thanks
Jagadeesh.G

Adding one additional row to table control of VA01

HI all,
I am working on free goods N:N senario which is not supported by sap standard.
so we have decided to club all the material on the basis of material group and PSTYV = 'tann' in the table control of va01 and at the end of tann we have to display the free goods .The user exit is USEREXIT_MOVE_FIELD_TO_KOMP.
Please help in in adding the additional row in table control of va01 (TCTRL_U_ERF_AUFTRAG).
Even i have gone through all the thread in sdn and tried all the solution but none of the solution is working .
plz quote solutions....
thanks..
Kundal.

The user exit is USEREXIT_MOVE_FIELD_TO_KOMP
Are you adding condition records, or adding free materials to VBAP? If free materials to VBAP, you're in the wrong exit, I think....look for routines that allow you to add to internal table XVBAP in includes named like MV45AFZ*, and remember to set you UPDKZ to 'I'-insert if you're adding new rows.
Not sure what you mean by not supported by SAP standard; SAP does support free goods, via config!
Edited by: BreakPoint on Mar 14, 2011 4:11 PM

Selecting rows in table control

Hi experts,
I have question regarding selecting rows in table control. How can I select a row when a button is pressed. I cannot use the selection column in this case. Is there any option to achieve my requirement without using the selection column. Thanks.
regards,
sriram.

By,
Using the Get cursor syntax you can achive the Selected row in Table control.
DATA : selrow TYPE i,
selindex TYPE i .
* getting the cursor line in Table Control for selected row
GET CURSOR FIELD selfield LINE selrow.
selindex = <tablecontrol>-top_line + selrow - 1.
Prabhu

How to select all the rows of table control in BDC

Hi All,
While I am doing BDC for Transaction Code MC88, After the first screen I will get another screen with tabble control, Here I need to select all the rows of table control, I am assignng the 'X' to the first field of Table Control which is the indicator for selection.
Here I am getting message called Indicator field is not in program and screen.
While doing Recording I am not able to record the indicator, Please any one let me know how to record the Entire table control selection.
Thanks in advance..

Sorry about that lakshmi. Here is my code.
    PERFORM dynpro USING : 'X'   'SAPMMCP6'          '0105',
                           ' '   'RMCP2-MATNR'       t_matnr,
                           ' '   'RMCP2-WERKS'       t_werks,
                           ' '   'BDC_OKCODE'        '=AKTV'.
    PERFORM dynpro USING : 'X'   'SAPLMCPA'          '0707',
                           ' '   'BDC_OKCODE'        '=MRKE'.
    PERFORM dynpro USING : 'X'   'SAPLMCPA'          '0707',
                           ' '   'BDC_OKCODE'        '=GRAO

Enable/Disable Rows In table Control

Similar Messages

Maybe you are looking for