Enable Document Structure and Document Hierarchy

We have enable the document browser in SPRO, but the folder do not appear in a hierarchy.  In other words, I can create a FOL type DIR, but it looks like any other document type.  I can not navigate into the folder and add sub folder and documents to it in the Document Browser.
Is there a configuration that we are missing?
Max points to the first correct answer.

Dear Andrew
First of all please note that in SAP DMS, you cannot view Folder structure as you would expect.
If you want to create a Folder in SAP DMS follow these steps :
- First create a DIR using CV01n
- Convert the DIR into Document structure in CV11 giving Doc. type and Document number
- Now the DIR is a Document Structure ( Folder) and add other DIR s into it
- You can also add other Document Structures into this and those will become Sub Folders.
This is a very time cosuming procedure and if u have large requirment of creating Folders and Subfolders, better install SAP Easy DMS
In SAP Easy DMS  you can create Folders and Subfolders as in Microsoft Explorer.
You can dowload SAP Easy DMS from http://service.sap.com and install.
SAP Easy DMS is very user friendly tool and requires little training for end users to understand compared to SAP DMS.
Regards
Aby

Similar Messages

  • Document hierarchy and document structure....

    Can anyone give me a clear picture of document hiererchy band document structure
    i have read the material, could not distinguish both...need a clarity with an example
    Regards
    surya

    See By simple words
    Document Structure 
    Similar to document BOM.This will help you to create a BOM comprising of various DIR's under one Library
    Usage: In production order instead of attaching various documnets in line Item , Instead create a Document stucture and assign it under Production BOM which will occupy under single Line Item.
    The function for exploding a document structure from top to bottom gives a list of all the documents and text items contained in the structure.  Each document contained in such a structure can have its own document structure, as well as being a component of others.  These document structures are exploded completely, level by level.  The depth of the explosion levels is unlimited.  The document structure can be accessed directly from the processing functionality of the document info record.
    Document Hyrarchy
    You can Create a link between the originals attached in the DIR, by defining the superiority status .
    By defining a superior document, a direct predecessor for a simple document hierarchy can be set.  The hierarchy is not limited to this level; it can be expanded from the superior document.
    The superior document can:
    u2022     Be superior to other documents
    u2022     Be inferior to another document
    Documents of different document types can be put into a document hierarchy.  Recursiveness is not supported; the same document may not appear in two different places in the hierarchy.  This means that a document can only be entered once in the entire u2018explosion pathu2019.  By entering superior documents, an entire document hierarchy can be represented in the system.
    Let me know if you need More info.
    Regards,
    Muralidharan

  • Document structure, Document Hierarchy, Document line Item Bom

    hi, All
    I m confustion in the following,
    1.Document structure,
    2.Document Hierarchy,
    3.In Material bom- DOCUMENT [CS01/2]
    We can enter so many document in the above activities.
    I m confusion with Document structure and Document in material Bom [CS01/2].
    I linked documents in CS02 but Those will shows in DMS but Can't opens. I don't know what is the use creating link in CS02, even though this document not triggers Production order.
    [For document structure needs Change number that i know.]
    But actual use or application i dont know. Could Explain with Exmple.
    Rgds
    Ben

    hi,
    niranjan,
    I created a object link for Bom Item [STPO_DOC] and Bom header  [STKO_DOC] using T-code CS01. This BOM item, BOM Header triggered in DMS. From DMS I am trying to display cs03, But system wonu2019t allow to display.
    And secondly I am trying to link document from DMS to sap object- Material Bom [STOP]
    But system wonu2019t allow.
    How i can establish link materail bom and dms.
    Rgds
    Ben

  • Document structure & Document Hierarchy

    Hi,
    Can any one reply me the difference between Document structure & Document Hierarchy with suitable example for more clarification? Write me in your own words don’t give me the link from sap help, I know that.
    Waiting for your valuable response.
    Regards,
    Seema Pilankar

    Hi,
    from my point of view I would recommend you to use the functionality of document structure.
    The main difference is that for document structure you can create a header in transaction CV11 and then link as many document info records to it. Further transactions are CV12 (edit) and CV13 (display). So the document structure is easier to handle. Due to the position interval it should be possible to add up to 999 documents here.
    The document hierachy is nearly the same but you have to go the transaction CV02N and enter the superior document info record for each sub-document and this needs a lot more time than in CV12 for example. For the document hierarchy there is no limit on the number documents which are linked to a superior document info record.
    For more information please see the SAP Online documentation (http://help.sap.com) under:
    SAP R/3 Enterprise Application Components
    - Cross-Application Components
      - Document Management
         - Document Structures
    I hope this inrformation could be useful for you.
    Best regards,
    Christoph
    P.S.: Please don't forget to reward points for good information.

  • Differences between Publishing sites and publishing enabled document library

    Hi
    what is the main differences between Publishing sites and publishing enabled document library 
    and how to enable publishing for document library?
    adil

    Publishing Sites is an out-of-the-box site template designed to publish web pages and it comes with a pre-built workflow or without (depends on which template you pick). It comes with libraries such as Pages library, Publishing Images, or Site Images.
    It is configured to fully customized the master pages (or add new ones), and page layouts.
    There is no such thing as publishing enabled document library. A document library is not designed to publish web pages. You can have Site Pages library in a team site, but if you are looking to fully brand a site collection, then this is not your answer.
    You will need to use a Publishing Site to fully brand your Internet or Intranet site.
    You can enable the publishing infrastructure on any site that is NOT a publishing site, but this does not turn your provisioned site to a publishing site. It simply turns on publishing features, such as navigation management, master pages/page layouts management,
    publishing workflows, etc....

  • Learning SAP BW authorizations structure and hierarchy  -  concepts

    Hello Experts,
    I need a good document for learning Authorizations structuring and hierarchy in SAP BIW 3.5 . I am giving authorizations in BIW but do not hv conceptual nd fundamentalistic knowledge of SAP BW authorizations and its structure . Plz send a good document for learning BW authorizations .............................it may be an excerpt frm FU&FU guide. My Email Id is [email protected]
    A short but complete SAP BW fundamentalistic , concepts and structure & hierarchy covering document is appreciated.
    Requested to revert at earliest as this is very urgent.
    Points guaranteed.
    Regards,
    Somya

    Hi maheshwari ,
    Use these steps for authorizations,
    1.before going to authorizations u have to decide on which Infoobject u have to apply authorizations.
    EX: SD--- Sales Org, MM -> palnt ,purorg,FI> companycode.
    first u ahve to decide which area & on which Infoobject.
    2.goto that Infoobject --> change there check the checkbox Authorization relavent object cahechbox
    2.after that U Have to goto RSSM there u have to create authorization object
    Ex: Zxxx ( XXX is Infoobject Name ).
    3. In the same transaction Screen u have Infocube selection radio Button check that then select on which cube(cube means under that cube all Quaries) u have to make authorization for that perticuler Infoobject.
    4.next goto PFCG create role & save it
    5.goto Authorization tab in that selct edit authorization it will give automatiaclly authorization Templates in that u have to select only S_RS_RREPU & press Enter.
    6. Select manual pushbutton it will ask authorisation object enter ur authorization object what u have created ( zxxx) .
    7.click generate +enter
    8. goto user tab Enter userId+enter + click on usercomparision+ enter
    9.save the role.
    FOR HIRARCHIES:
    1. goto RSSM There u have one rediobutton called authorization hierarchy ( this radio button is very below the RSSM screen)
    2. there u have to select Hierachy on which u have to apply authorization.
    Thanks,
    kiran

  • Error while opening IRMS enabled documents

    I have enabled IRMS settings at a document library in my site. I am having full control access to the site but I am not able to open any files under the library. I get an error message which says " cannot verify user information at this time. Do you
    want to open this file using different credentials?". When i click yes i get a message saying "You do not have credentials that allow you to open this workbook". This error occurs only to me and other full control users are able to do it. I
    created a new library and enabled the setting and tried there as well but the same error comes for me alonw. I tried on other machines too but no luck. I refreshed my profile at CA and  added myself again to the site but the issue is not solved. When
    the IRMS settings are disabled it works fine. Is there any solution for this?

    Hi Manikandan,
    Per my knowledge, for AD RMS to work properly, all users must have an email attribute to protect and consume content.
    Please check if email address is configured for your account in Active Directory.
    If not, please assign a email address to your account.
    More information about AD RMS troubleshooting are provided in the link below:
    http://social.technet.microsoft.com/wiki/contents/articles/13130.ad-rms-troubleshooting-guide.aspx
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • OpenGL enabled document Windows error message? Please help

    Hi
    When I am trying to use the rotate tools inside photoshop, I get a the NO sign with an error message: "Could Not Complete Your request Because It Only Works with OpenGL Enabled Document Windows". I don't understand why this is happening. I have an OPenGL Graphic card. Qudro K600 and every thing seems okay under the Performance section in the Preferences menu? I would appreciate any help? Thank you.

    I thank you for your respond. Like I mentioned everything seems okay under the Performance section. Photoshop is recognising my Quadro K600 graphic card and all options are checked, and I am getting the above error message. It's annoying as I can't use the Rotate tool inside Photoshop or on my Wacom tablet. I also uninstalled my Graphic card driver and installed the latest driver. I hope someone can resolve this problem for me? Thank you.

  • Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....

    Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....
    -CharlieH23

    Copy and paste only this area, you may have to scroll down.
    Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
    Operating System: Windows 7 64-bit
    Version: 6.1 Service Pack 1
    System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 2
    Logical processor count: 4
    Processor speed: 2494 MHz
    Built-in memory: 6019 MB
    Free memory: 3360 MB
    Memory available to Photoshop: 5227 MB
    Memory used by Photoshop: 60 %
    Image tile size: 128K
    Image cache levels: 4
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    OpenGL Allow Old GPUs: Not Detected.
    OpenCL Version: 1.2
    OpenGL Version: 2.1
    Video Rect Texture Size: 16384
    OpenGL Memory: 2112 MB
    Video Card Vendor: Intel
    Video Card Renderer: Intel(R) HD Graphics 4000
    Display: 1
    Display Bounds: top=0, left=0, bottom=768, right=1366
    Video Card Number: 1
    Video Card: Intel(R) HD Graphics 4000
    Driver Version: 10.18.10.3958
    Driver Date: 20140930000000.000000-000
    Video Card Driver: igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,igd10iumd32
    Video Mode: 1366 x 768 x 4294967296 colors
    Video Card Caption: Intel(R) HD Graphics 4000
    Video Card Memory: 2112 MB

  • How to enable document rights

    How do I enable the document rights to enable the comment and markup tools in 9.4 adobe reader?

    You need Acrobat to enable document rights.

  • How to enable Document is Tagged PDF

    Hi,
    Kindly let me know how to enable "Document is Tagged PDF" using Scripting. For more references I have attached the screenshot.
    Thanks for looking into this.
    Regards,
    Sudhakar

    Hi,
    Yes, the document is tagged for images and the option should be enabled as screenshot attached earlier. We need the document should be Tagged as "YES" in the Description (Document Properties).
    And when we run the option "Add Tags to Document"  we lost the Alternate text information for the eps images.
    Kindly Advise!
    Regards,
    Sudhakar

  • What is the pupose of the Enable Document Cache option?

    Hey All,
    What is the Enable Document Cache option in the Reports Properties - General Settings? What are the benefits of this option? Documentation is lean on this one.
    Thanks,
    Ron

    >I miss information of optimal setting for the cache. What is the ideal size and what is that setting depended on? Memory size? Raw file size?
    The default size is 1GB, but it can be set much higher. When the number of previews held in the cache reaches the limit of the cache size older previews get dropped. This is the reason given for making the cache large. However, the problem with this approach is that the ACR cache preview is in addition to to the Lr preview created for the Library module. So, a larger cache will mean that even more disk space is used storing duplicate previews. If you're using a slower computer and are in the habit of quickly scanning through large number of files in the Develop module then a larger cache "might" help, otherwise anywhere between one and five GB should be more than adequate.

  • How to enable document map in SSRS Report Manager

    Hi Team,
    How to enable Document Map in SSRS Report manager 2008 version.
    laxman

    Hi kumarj4009,
    As per my understanding, you created a Document map, it works fine in Business Intelligence Development Studio (BIDS), but you could not view the report in report manager.
    After we create a report in Visual Studio, we need to publish it to a report server to make it available to users. In Report Designer in Business Intelligence Development Studio, we must specify the report server as well as folders for reports and shared
    data sources so that we can publish the items in a project. For detail information, please refer to the following steps:
    Right-click the report project, and then click Properties.
    In the Property Pages dialog box for the project, select a configuration to edit from the Configuration list.
    In OverwriteDataSources, select True to overwrite the data source on the server each time reports are published, or select False to keep the data source on the server.
    In the TargetDataSourceFolder text box, type the folder on the report server in which to place the published shared data sources.
    In the TargetReportFolder text box, type the folder on the report server in which to place the published reports.
    In the TargetServerURL text box, type the URL of the target report server, then click OK.
    Right-click the report in the project, then click deploy, after the report is successfully deployed, you can preview the report in report manager.
    For more information about Set Deployment Properties, please refer to the document:
    http://msdn.microsoft.com/en-us/library/ms155802(v=sql.100).aspx
    If there is any misunderstanding, please feel free to let me know.
    Thanks,
    Wendy Fu

  • How to migrate document hierarchy from DEV to PROD?

    Need some suggestions as to migration of the document hierarchy. The migration wizard is great for migration objects such as portlets, but it's cumbersome to migrate the entire document hierarchy from DEV to PROD as we will have to select all the leaves in the hierarchy to retain the tree. Does any one have the similar experience and have some suggestions? Thanks!

    This is wrong forum for such question, you might want to post it here
    General EBS Discussion

  • How do enable document rights so i can put in a text box on pdf document?

    I have a scanned document which has been saved as pdf.
    I need to add a text box where I will write a name.   Afterwards, I would like to print it out.
    But,when I clicked on the "text box tool" and "pencil eraser tool" under tools, there is a message that states "*Only available when document rights is enabled".  See below.
    How do I enable document rights so I can add a text box to a saved pdf?

    Hi ianb766993,
    It sounds as though you have the PDF open in Reader, which doesn't have the same editing capabilities that Acrobat has. Did you use Acrobat to create the PDF from the scanned document or did you receive the PDF from somebody else? If you have Acrobat, please make sure that you're opening the PDF in Acrobat if you want to edit it.
    If you don't have Acrobat, feel free to download a 30-day trial from http://www.adobe.com/products/acrobat.html. Then, you can open the PDF in Acrobat, make the changes that you want using the editing tools, and print the updated PDF.
    Best,
    Sara

  • Frequently faced errors when making code as unicode enabled document

    Hi ALL,
    Does any have frequently faced errors when making code as unicode enabled document
    please forward it to
    [email protected]
    thanks
    Suchitra

    WS_DOWNLOAD and WS_UPLOAD function calls will need to be replaced with GUI_UPLOAD and GUI_DOWNLOAD or the assocaited methods of the class CL_GUI_FRONTEND_SERVICES.  Also, some syntax changes to some statements, like OPEN DATASET will need the ENCODING extension.
    Regards,
    Rich HEilman

Maybe you are looking for