Enable extensions not in Develop drop down list.

While searching for a solution to get safari 8.0 to run extensions I have come across two problems. First I cannot turn them on. The slider just moves back to 'off' when I slide it to 'on'. Second, I found a website that said I need to enable extensions as they are disabled by default and was given instructions to do so on the 'Develop' menu but there is nothing on the menu to 'Enable extensions'. Another post from October that they cannot turn extensions on was never resolved.

Hi daibrahim,
In Safari 8 for Mac OS X 10.10 (Yosemite) the extensions are managed from the Safari Preferences > Extensions pane. See this article for reference and how to -
Choose the Safari Extensions you want to use on your Mac - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

Similar Messages

My area is not on the drop-down list?

just applied for skype number but my area is not on the drop-down list can't get any further until I choose something from the list, what do I do, just pick the nearest area?
Post transferred to create its own new thread (topic);
subject/title edited accordingly.

Hi, ladyfromllan, and welcome to the Community,
Yes, you are correct: you would need to choose a Skype Number nearest where you ultimately wished to have your Skype Number located. Ultimately, the number would be best situated so that those who call it the most would not incur toll charges; however, that said, Skype Numbers are not available absolutely everywhere for several legitimate reasons.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

I wish to reinstall Adobe Creative Suite 6 Design Standard on a replacement PC using the original box CD and Serial Number. Website says SN is valid but cannot find corresponding Adobe product. My product is not on the drop down list offered. hat do I d

I wish to reinstall Adobe Creative Suite 6 Design Standard on a replacement PC using the original box CD and Serial Number. Website says SN is valid but cannot find corresponding Adobe product. My product is not on the drop down list offered. What do I do next?

Contact support by web chat.
Mylenium

Rejected Quotation Should not appear in Drop Down List

Dear All,
While Making PO With Reference to RFQ.
In ME21N while selecting Rejected Quotation should not come in Drop Down List
Only Those RFQ with Accepted should come
Regards
Amey

Can it be done in Standard Tcode.
Are there any customisation for it
Regards
Amey

LMS 4.2.3 variable name not show in drop-down list

Hi all,
I am trying to use performance threshold to trigger a script whild device CPU or Memory high.
There is a default threshold template called "CPU Utilization" and "Memory Utilization".
After I choose either one, there should be one or two variable name in drop down list.
But I only see "Select MIB Variable" in the list.
I try to create a template with exact the same variable but still got nothing in the list.
The strange thing is that no all the default template has this problem.
I can see variable name under some template like "Device Availability" or "Port Availability"
And this is not browser problem because I try both IE and Firefox.
Any one how to solve this?

Thanks for your advice.
Now all my devices are connected in Layer View [Devices View], but User Tracking still not shows me informations from several switches about hosts. Its works like randomizer. Now 5 devices form User Tracking don't show me informations.[WS3550 2 devices and 2 WS-C2960S-48LPS-L]. In lists devices Acquisition Action i check acquisition for this 5 devices. After that acquisition complete, but User Tracking still empty ( all ports on this devices are active).
SNMP, Credentials all is good.
I try resolve this problem many days, but without results. Its semmes like a bug.
ANy propositions?

HCM Processes & Forms: Field not updating after Drop Down list selection

Hello all,
I am having a problem that I think happens a lot, but I can't solve it through all the examples given here.
I have a Drop Down List where I change the value. On the CHANGE event, I have:
xfa.record.CONTROL_PARAM.ISR_EVENT.value = "GET_ORGINFO";
ContainerFoundation_JS.SendMessageToContainer(event.target, "submit", "", "", "", "");
I have defined a User Event called GET_ORGINFO. It gets triggered fine. It moves into my generic service that I defined, and it changes the value that I want to change.
When I look at the PDF, the value is still in it's old value. So, after reading some blogs, which specifically says, if something goes wrong in one service (I have 3: my own, SAP_PA and S_MGRS_POSITIONS), they all fail. I debugged and checked, and, after some changes, nothing goes wrong anymore, nothing that I can see anyway.
So what I do see, is that there's a call made like this:
CALL METHOD me->process_data_container
    EXPORTING
      ref_to_data_container = ref_to_relevant_data_container
      operation             = c_do_operations
      message_handler       = dummy_message_handler
      no_auth_check         = no_auth_check
    IMPORTING
      is_ok                 = operation_ok.
Within this method, my new value is listed (in the table VALUES_OF_FIELDS). After this call is made, so when it exists the method process_data_container, the old values are back in VALUES_OF_FIELDS.
So, at the last moment INSIDE the method, the values are correct, as soon as it steps out of this method, the old values are back.
Does anyone have any idea? Am I doing something wrong with regards to the User Events? I am on EnhP 04.
Gr,
Jaron Frenk

Hey Chris,
Unfortunately, that's not it. I did check the fields I need. Everything is going ok. As in, I get the fields (with their current values) in my own generic operation. I see everything updated the way it should. But then at the end, nothing happens...
What exactly do you mean by " then make sure your own generic service has it's input/output defined correctly". What input/output do you mean? I assume the generic service itself is okay, since it works with the user event "USER_EVENT_CHECK". And it sure is possible I am forgetting something in the definition of the user event, but I can't figure out what.
A small addition*
I just checked by user event. I have 3 fields selected:
I0001_PERSG
I0001_PERSG_TXT
I0001_PERSK
The generic service should get the PERSG and PERSG_TXT based on the PERSK that is entered. I don't think I need anything more.
Gr,
Jaron
Edited by: J. Frenk on Apr 26, 2010 9:01 AM

Lotus Notes Missing in Drop Down List for Calendar Synch

Hello there,
   A) I am attempting to synch my blackberry tour with my calendar in Lotus Notes 8.5.2. I was able to previously synch my calendar when I had Lotus Notes 8.5.1, but since our upgrade to 8.5.2, I get an error saying it could not find a supported version of Lotus Notes.
B) When I try to go in and configure the organizer section of the desktop software, there is no option for the drop down list for Lotus Notes. I have tried uninstalling, rebooting and then reinstalling (based on info from other posts), but none of that seems to work. I have checked and all the connectors are there, but for some reason, they are not being recognized. Is there some specific key or file that intellisynch is looking for to know that Lotus Notes is installed on the machine?
Now, I am assuming A&B are symptoms of a common problem, but I am at a loss as to how to move forward. Any ideas on how I can get this software to recognize Lotus Notes? I appreciate any help you can give.
Thanks,
Rick

While calling method SET_TABLE_FOR_FIRST_DISPLAY pass 'A' to paramater I_SAVE .
CALL METHOD grid1->set_table_for_first_display
      EXPORTING i_structure_name = 'SFLIGHT'
                is_variant       = gs_layout
                i_save           = 'A'
                i_default        = p_def
      CHANGING it_outtab        = gt_sflight.

TextBox does not update when drop down list selection changes

I have drop down list the user can select a client name from. Once the client is selected and the "view report" button is clicked it the report has a textbox that displays the Client name or it is supposed too.
The report will display the first client name but any subsequent client name does not display on the first. I am pretty sure that is because I have chosen the "Dataset" where the both the "values' have "first" in front of the field.
How do I get the textbox to update to match as each client is chosen from the drop down list? I cannot use the report "parameter" I am passing to the stored procedure because the drop down list's parameter is the database name not the client
name.
Any help is appreciated.
Thanks,
Sue

Okay, sorry but I am just getting back to my report. I still cannot display the Client Name in a text box at the top of my report. The textbox must be dynamic because my client name can be one of many that is picked from a drop down list box.
I added a textbox and tried to use the "join" with my Parameter - clientname.
In the textbox expression I used the following:
=JOIN(First(Fields!ClientName.Value,
"GetDatabaseName"),",")
I got this error message:
[rsRuntimeErrorInExpression] The Value expression for the textrun Textbox1.Paragraphs[0].TextRuns[0] contains an error: Overload resolution failed because no Public 'Join' can be called with these arguments:
    'Public Shared Function Join(SourceArray As String(), [Delimiter As String = ]) As String':
        Argument matching parameter 'SourceArray' cannot convert from 'String' to 'String()'.
    'Public Shared Function Join(SourceArray As System.Object(), [Delimiter As String = ]) As String':
        Argument matching parameter 'SourceArray' cannot convert from 'String' to 'Object()'.
Preview complete -- 0 errors, 1 warnings
I also tried setting up a "filter" on the clientname using these instructions
Right-click the dataset (GetDatabaseName) to open the Dataset Properties.
Click Filters in the left pane, add a filter like below:
Expression:[DBName]
Operator: In(multiple-parameter) or =(signal-parameter)
Value:[@DBName]
I get an error message too which I am not even going to display.
I can set it up and run it as long as I don't want to change the value in the "textbox" to match the value in the drop down list. I am totally frustrated at this point. Why won't it work?
Simply put - I want the value selected in my drop down list box to match the value in my textbox at the top of my report if drop down list says "Susie" then I want "Susie" in my textbox or if drop down changes to "Bobby" then I want Bobby to show up in my
textbox when I generate my report.
Any suggestions of what else I may need to try?
Thanks for the help.
Sue
Sue

ODBC driver does not appear in drop down list

We created a system DSN using Unix ODBCConfig and the drivers
supplied by IBM in its iSeries Access package. We are trying to
connect to our AS400. We now have Coldfusion installed on SuSe 9.3
Open Enterprise Server. Coldfusion runs fine. When we try to add a
data source in the ColdFusion administrator, the system DSN driver
that we configured does no show up in the drop down list. Did we
miss a step? We have done this succesfully with coldfusion on
Windows 2003 server.

What version of ColdFusion are you running? I know with MX 7,
your individual DSNs may not be listed, ODBC or otherwise, only the
driver types. You are prompted to provide a valid Data Source name,
then to select a valid driver type, which in your case would be
ODBC Socket.
Phil

My country ( EGYPT ) is not on the drop down list for the FaceTime app ?

While trying to use the FaceTime app.on my iPad I was asked to identify my region I did not find my country EGYPT on the drop down list of all countries .
What shall I do ?
pls. Help...
Thank you .

We are users. Contact Apple.

Adapter Engine NOT in the drop-down list - RFC adapter, Communication Chan

Hello XI Experts,
I recently installed IDES (ERP2005) along with XI (NW2004s). I carried out the post installation steps for XI. I set up XI (technical systems, business systems, etc).
I have started to create an RFC to File XI interface. I have carried out the necessary steps in the Integration Repository and am now setting up the scenario, etc in the Integration Directory.
I have reached the stage of creating the communication channel of type RFC for the sender system. However, when I do this, the adapter engine is empty i.e. there are no possible entries in the drop-down list. I was expecting to see "Integration Server" as a possible entry.
Could someone advise me on what I may have missed which leads to this problem?
Thanks and regards,
Nicholas.

Hi,
You have to get the SWCV from SAP market place.
Support Packages and Patches -> SAP NetWeaver -> SAP NETWEAVER -> SAP NETWEAVER 2004S -> Entry by Component -> Content PI/XI
XI CONTENT SAP_BASIS 7.00 / 6.40
You have to upload the file in the Integration repository
Best regards
Omar

How to use multiple drop down lists and do not allow duplicates.

I am creating a roster that has multiple positions on multiple pages. I have a drop-down list that is populated with all of the employees and want to make sure that the same employee cannot be selected for multiple posts. Ideally, when one is selected in a position, that person would not be an option in the other drop-down lists. Also, when the form is published, the end user will not use the drop-down lists in order. I have found script to remove selected items, but it only works when the user makes selections in order (List1, List2, List3 etc).
First time posting, any help would be appreciated.

Look into the ring control. It behaves a lot like an enum, but you can dynamically set its contents and values associated with those contents.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

XI pro not in drop down list for serial number verification

I have installed XI pro and am directed to the serial number upgrade page. XI pro is not on the drop down list and when I enter my serial number it tells me its not for the qualifying product when i try to use any of the XI drop downs. ???

Hi smilinbudha
As you've purchased an upgrade, when you enter the the Acrobat Pro XI serial number it will look for a previous qualifying version on your computer. If not found, you have the option to enter your previous version serial number so would enter your Acrobat Pro X serial number.
Hope this helps.
Thanks
Bev

MM-creating a PO - vendor could not be found thru drop down list.

dears, request to share this and provide how !
we could not find a vendor while creating a PO- normally we slect the vendor by the help of drop down list, in several monts it happend that vendor was not availble in drop down list, since we knew that this vendor is definately exists in our vendor master. then we searched in cvendor maser - yes it is there. then why not sow in drop down list.
later we tried agian and agian and finelaly we found it in drop down
note that
1- we tried all the mean by sorting vendor name, number etc could nto find)
2- we got all vendros - as we removed the general limit of 500 hits.
3- then we checked in vendor master - it was there.
my worry is
1- to know how it happend. and how it corrected itself.
2- does it happen frequently.
3- if it can happen for no reason (or hidden logical reason) then in som ecases we can make some mistakes, in same process or
in other proces of HR, MM, PM FI etc,
waiting your valueable share, guiide and advice.
Thanks n regards.
mansoora.

Chuck you have placed Order for Acrobat Upgrade if you don't have any previous version of Acrobat than you need to cancel this order and need to buy a full version.

Downloaded brushes not showing on right click drop-down list

I have recently reinstalled Photoshop cs5.1 and ran into a problem. My installed brushes are not showing up on my right click drop-down list. I took the old brushes and copied the folder to the new location. When I go to use these brushes there used to be a big drop down list when I right click anywhere on the canvas. It now only shows the basic brushes, but here is the thing though I can load and see them through the preset manager but they are not on my drop-down list like they were before I reinstalled.
I have noticed something odd as well this may help in the solution I have noticed that some files from Photoshop are saved on to my second hard drive, but I do not know if this is the cause.
The reason I reinstalled is my GPU acceleration wasn't working and had to reinstall to fix this. If any other information is needed I would be glad to share. This is just cutting into my workflow time since I have to load every single brush singlely and if I load them all I have to search through every single brush to find what I need.
Thank you!

I found a solution to my problem it may help others! I run Windows 7 64-bit this has two seperate folders for applications when installed. I did a windows search for one of the names of the available brushes on my right click list. The search showed me where the brushes were at. (Example: I searched in windows: DP Brushes) Aparently photoshop normally installs as a "32-bit" program in this location, C:\Program Files\Adobe\Adobe PhotoShop CS5.1\Adobe Photoshop CS5.1 (64 Bit)\Presets\Brushes it is here that I copied my new brushes to and it showed up again. Hope this helps anyone who was in my situation!

Enable extensions not in Develop drop down list.

Similar Messages

Maybe you are looking for