Enable Log feature on WRTP54G

Hi-
I have the Linksys WRTP54G (Firmware Version: 5.01.04) and Vonage VOIP service. I just want to enable the Log feature on the router available under the Administration tab, but everytime I specify an ip to push log messages to, I get a prompt for a Username and Password that is different than the admin username and password credentials that I have. Does anyone know the default username and password or has this been locked down by Vonage? I did purchase the router through them when I ordered their service.
Thanks,
merker19

This is one of the irritating things about this router. Many of the features of this router are "owned" by Vonage, including router firmware upgrades.
To enable logging, you must call Vonage and get the password for the ID "Admin", (yes, it is an upper case "a").
This password changes every 5 min and you must contact Vonage to get it, then if you want to change the IP, you must call them back and get the new password. As such, it is best to set the IP to *.*.*.255 (IE; 192.168.1.255). This will broadcast the logging data to all addresses in your network so you don't have issues with DHCP or chagning the destination in the future.

Similar Messages

Windows XP mode Can't enable integration features

I noticed there are so many threads on this and all the discussions confuse the hell out of me.
Here's how it happened for me: I install Virtual PC, then install Windows XP mode. The VM boots up fine, everything is smooth, I can access my C drive from the VM and run an XP program as if it's operating from my host Win7 machine.
But I have to change the network settings so my bandwidth monitor which doesn't work on Win7 will recognize my host machine's traffic and log it. That requires a restart of XP mode. I do that and that's how this error happens. Now I can't enable integration
features no matter what I do.
I've followed steps in other threads. I deleted the .vsv file, set it to auto shut down or turn off instead of hibernate. The "Enable Integration features" button is greyed out. That cryptography FIPS thing or whatever it is is ALREADY disabled,
always has been. That didn't work for me.
Can anybody help me fix this?

Well, with all the minutia in your post it was difficult to decipher exactly what your were after.
If you have a question you should provide the specifics for the question and leave out all the irrelevant minutia. Details specific to the situation you want to resolve are what's important.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”
Hi I get "Can't enable Integration Features" error when starting XP mode, please help.
That better?
Either way, I fixed the problem by reinstalling XP Mode.

Problem with Enable scalable feature of XSLT processor

Hi Gurus,
I'm using BI Publisher 10.1.3.4.1. I've having a report, when running in a specific sequence (i.e. after running with XML dataset 1 then dataset 2), will yield an error. Here is the log I got in the xdo.log.
[061411_110902953][][EXCEPTION] java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeProcessXSL(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(Unknown Source)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
     at oracle.apps.xdo.template.FOProcessor.createFO(Unknown Source)
     at oracle.apps.xdo.template.FOProcessor.generate(Unknown Source)
     at oracle.apps.xdo.servlet.RTFCoreProcessor.transform(RTFCoreProcessor.java:91)
     at oracle.apps.xdo.servlet.CoreProcessor.process(CoreProcessor.java:256)
     at oracle.apps.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.java:81)
     at oracle.apps.xdo.servlet.ReportImpl.renderBodyHTTP(ReportImpl.java:678)
     at oracle.apps.xdo.servlet.ReportImpl.renderReportBodyHTTP(ReportImpl.java:255)
     at oracle.apps.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:270)
     at oracle.apps.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:250)
     at oracle.apps.xdo.servlet.XDOServlet.doGet(XDOServlet.java:178)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.apps.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:86)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.NullPointerException
     at oracle.xdo.parser.v2.FilePageManager.pageLength(FilePageManager.java:242)
     at oracle.xdo.comp.CXMLStream.ensureReadCapacity(CXMLStream.java:1543)
Then I tried turning off "Enable scalable feature of XSLT processor" (under the FO Processing, default is ON) This error cannot be reproduced again (i.e. my report can run in whatever sequence without an error).
Would anyone explain to me what actually is the difference between setting the "Enable scalable feature of XSLT processor" to true and false. I'll be running the same report template with thousands of pages in some cases and I'm anxious whether turning OFF the "scalable feature" will make the performance suffer.
Thanks in advance,
Jonathan

Are you running Enterprise Edition? I believe flashback database is only available with Enterprise.

Is the CALL LOG feature GONE???!?!?!?!?!?

Someone PLEASE, PLEASE, PLEASE tell me that BB did not remove the CALL LOG feature (that was on the Torch)! This is HORRIBLE!!! If I wanted a phone that did not allow me to be productive, I would have activated my iPhone!!! PLEASE BRING THE CALL LOG FEATURE BACK!!! I might officially HATE the Q10!

I wasn't specific enough.
On previous BBs there was a call log feature which enabled users to access call logs and forward the call details including whether it was outgoing or incoming call, the telephone number called or calling in, the time of the call, and the duration of the call. Users were able to add call notes directly into the history of the call (including during the call) and email it or save it. Unfortunately, it appears that BB has gotten rid of this feature. Why they would do that is beyond me. That feature was one of the BEST features for people like myself who need to maintain a written record of calls and contacts. he proposed workaround that I have found is the Call Notes App which is virtually useless.
I'm going back to the BB Torch. This Q10 is the PITS!.

How to enable logging for the Web Proxy

Hi,
Does anyone know how to enable logging for the Web Proxy feature under "Web" in Server Admin?

Aren't the web proxy hits logged in the standard apache logs? /var/log/httpd/access_log

Virtual PC: enable integration features demands domain credentials

I've set up a vm and installed Vista. I've installed the integration components. When I try to enable integration features, I get prompted to login. The host PC is on a domain. The vm is not on the domain, but the only options the
login presents is to supply domain credentials. If I cancel, the integration features remain disabled. I am trying to share a drive on the host with the guest OS. Is there a way to solve this without adding the guest to the domain?
FWIW, I have an XP vm (not the XPMode VM but another one I created from scratch) that I was somehow able to manipulate into getting the integration features to work. To the best of my recollection, after clicking cancel, it would prompt me
for a local login. It would not allow me to log in with the local account until I created a password for it. After that, I could cancel the prompt for domain credentials, satisfy the prompt for local credentials and the drive I was trying
to share would show up in Windows explorer. This has since stopped working and now behaves identically to the Vista VM (cancelling prompt for domain credentials results in nothing being shared).
Any advice would be helpful.
Thanks!

Hi,
I set up a same workaround like you, a host machine in a domain, and I install vista sp1 Enterprise(not join the domain), and try to enable integration. The credentials
prompted to login. I just input the username(local user)and password, install successes.
That’s needn’t to login with the domain user.
Hope that will help you.
Regards,
Leo
Huang
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

In Adobe Bridge when I try to open my camera raws, I get a pop up box stating "Bridges parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature" What do I do? Please advise

In Adobe Bridge, when I try to open my camera raws, I get a pop up stating"Bridges parent application is not active. Bridge requires that a qualifying product has been launced at least once to enable this feature." What the heck? I have a PC and haven't had problems before.. I have adobe cloud and pay my monthly bill...

Have you opened Photoshop or any other Adobe app that Bridge works with? You need to do this if you've upgraded PS or just signed up for CC.

How to use j2se 1.4 logging features with j2ee 1.3

Hi,
We have developed an EJB that will run in the j2ee 1.3 container of weblogic 5.0
We would like to use the logging features of j2se 1.4 in our ejb.
Can this be done ?
How do I install and use j2se 1.4 a long side of j2ee 1.3 ?
Is this a recognised configuration ?
Many Thanks,
Mark.

Is it possible to install j2se 1.4 on the same machine
that is running weblogic with j2ee 1.3 ? Yes.
If it is.... How do we do it ?Just install it in different directory - the installer will do this for you by default anyway.
How do we protect our code running in the j2ee 1.3 container from
mistakenly using the classes provided with j2se 1.4 ?Thats what PATH and CLASSPATH environment variables are for. Read the tutorials on the left there for more information.
Do we end up with 2 separate VMs one a implementing
j2ee 1.3 and one a j2se 1.4 ?You end up with as many as you run.
Every time you run java (java.exe on windows, just plain java on UNIX) you run the version of the VM that's on your PATH.
It's quite normal to have (on the same machine) a 1.3 VM running Weblogic and a number of 1.4 VM's as clients of that Weblogic installation.
I think I'm right in saying that 1.4 VM's are (in some cases) regarded by BEA as supported clients of a Weblogic server running in a 1.3 VM, but you'd have to check their e-docs site for exact details.

Acrobat Pro 8 and Reader X - Enable Extended Features for Form

Using Acrobat Pro 8.3.0, I "Enabled Usage Rights for Adobe Reader" for a fillable form created in LiveCycle Designer 8.0. The following error message occurs when opening this form in Reader X:
"This document enabled extended features in Adobe Reader. The document has been changed since it was created and use of extended features is no longer available. Please contact the author for the original version of this document."
The form has not been changed and as mentioned, I am the author. Any solutions to allow user in Reader X to fill-in form? Do I need to upgrade to Acrobat Pro X?

I am having same problem with a 2011 year tax PDF fill in form I JUST got from IRS website. The actual form is the 2011 8829.
I can not open the PDF from the web browser or if I save it to my local drive.
I have not been able to open it at all ... thus I have made NO changes.
I am running Windows 7 64 bit, Adobe Reader X version 10.1.4.
After trying to open the doc (nothing displays) I go to properties, and it says ...
Title: 2011 Form 8829
Author: SE:W:CAR:MP
Created: 12/23/2008
PDF Producer: Adobe LiveCycle DSesigner ES 8.2.
PDF Version: 1.7 (Acrobat 8.x)
Tagged PDF: No
Fast Web View: No
What do I do to resolve this ... I only have this version of Reader ... nothing else.

Bridge will not now let me use camera raw, though I had been using it every day. It says that "the parent application is not active. Bridge requires that a qualifiying product has been launched at least once to enable this feature." What am I to do?

Bridge will not now let me use camera raw, though I have been using it every day. It ways that "the parent application is not active. Bridge requires that a qualifiying product has been launched at least once to enable this feature." What am I to do?

Usually this points to having some kind of earlier trial version still installed on your system. However without more details you are not likely to find an answer. Try this for a start:
How To Get Help Quickly

Camera Raw editing requires that a qualifying product has been launched at least once to enable this feature - Can someone help me I'm on a Macbook Pro 2013 with CS6?

I get this error message when I try to use Camera Raw in Bridge - all my other adobe products work fine. "Camera Raw editing requires that a qualifying product has been launched at least once to enable this feature" I have a 2013 Macbook Pro - I have also updated all the know adobe updates online.

Just a clarification in general:
BOILERPLATE TEXT extracted from the FAQ:
https://forums.adobe.com/thread/375816?tstart=0
Do not be abusive or aggressive in your tone
An aggressive, demanding, accusatory or abusive sounding post will often evoke an aggressive or abusive and unhelpful reply.
Remember, you are not addressing Adobe here in the user forums. You are requesting help from volunteers users just like you who give their time free of charge. No one has any obligation to answer your questions.

When I highlight photo's in bridge and then click open in camera raw this message comes up... Camera Raw Editing Is not enabled...Camera raw editing requires that a qualifying product has been launched at least once to enable this feature. I have used cam

When I highlight photo's in bridge and then click open in camera raw this message comes up... Camera Raw Editing Is not enabled...Camera raw editing requires that a qualifying product has been launched at least once to enable this feature. I have used camera raw a different way but it won't seem to work with bridge.

Have you opened Photoshop or any other Adobe app that Bridge works with? You need to do this if you've upgraded PS or just signed up for CC.

"Camera Raw Not Enabled" Camera Raw editing requires that a qualifying product has been launched at least once to enable this feature.

I upgraded my computer yesterday to a Mac Mini 2014 from a Mac Mini 2011. Restored the drive from Time Machine. The message I received when trying to use Photoshop was I had to many computer enabled. The option was to disable the other two and use this one, which I did. I tried to open a JPG in ACR and got the message "Camera Raw Not Enabled" Camera Raw editing requires that a qualifying product has been launched at least once to enable this feature". If I open a Canon RAW file Adobe Camera Raw opens normally. Stumped.
Jack

The problem cleared itself. Don't have a clue why.
Jack

The Document Enabled Extended Features in Adobe Reader.

Hi Experts,
We are facing a problem while opening a PDF form that is editable. get below error message:
The Document Enabled Extended Features in Adobe Reader, The document has been changed since it was created & use of extended features is no longer available. Please contact the author for the original version of the document.
Our requirement is like we received a PDF template from client. we added an image field by using Adobe LiveCycle designer to achieve user signature on the field & save the PDF form, once signature field is added; PDF form is opened in Adobe Acrobat X pro to enable readers extensions (open PDF form in Adobe Acrobat X pro -> File -> Save As - > Readers Extended PDF -> Enable Additional features.).
Once this reader Enabled PDF form is uploaded in sharepoint Document library where from user can download this form on their local, open this PDF form is opened in Adobe Reader on their local system the Above mentioned message appears.
Here we are using trial version of Adobe Acrobat X Pro, Can you please confirm if this error is because of this trial version? or some alternate approch.
Thanks,
Ram

Check your computer's date.

This document enabled extended features in Adobe Reader. The document has been changed...

I am trying to distribute an interactive order form to approx. 50 recipients with Acrobat X Standard which I purchased recently. Computer is Windows 7.
I can go through the form editing and distribution as usual, but when I (or a recipient) opens up the distributed form with Adobe Reader, they get the message: “This document enabled extended features in Adobe Reader. The document has been changed and use of extended features is no longer available. Please contact the author for the original version of this document.”
Oddly enough, sometimes is does work, but 90% of the time it doesn’t.
And I have another, older XP computer with Acrobat X installed, and it works fine 100% of the time – weird....can anyone help?

Hi Ken
We have so many people who have not updated they are trying on 9. I might just have to tell them we can’t support under reader 10.
Thanks
Tania
Never tell people how to do things. Tell them what to do and they will surprise you with their ingenuity. -General George S. Patton
Tania Lindenmayer \ Manager Organisational Shared Services \ Jabiru Community Youth & Children’s Services Assoc (Inc) \ Ph: (07) 3269 0044 Fax: (07) 3869 0675 \ [email protected]<mailto:[email protected]> \

Enable Log feature on WRTP54G

Similar Messages

Maybe you are looking for