Enable multiple PO numberranges to support SRM Classic implementation.

Hi Experts,
We have implemented SRM 7.0 Classic Implimentation.
We currently have one PO number range which is assigned to one PO document type to support North America and Canada region.
We are planning to go for roll-out for Latin America, Europe and Asia pacific.
Here the client requirement is that they need to have one PO numberrange per Company.
Can any one suggest what ios the BADI that can be used to achieve this. Backend ECC we can have as many PO document type but how can this be managed in SRM.
Thanks in advance please help me with BADI or any other means this can be achieved.
Regards,
B.N.Karthikeyan

Hi,
We are in Classic scenario implementation and hence the standard SRM does not have capability to manage multiple number ranges for PO.
My question can this be possible to have multiple PO number ranges in Classic scenario based on the company code of the user given in the user attribute.
SAP MM side I dont have any problem. Only thing is during transfer process how do we achieve selecting different number ranges if I maintain multiple numer ranges in SRM in the maintain intervals.
Do we have any BADI to achive this expectation. As the customising does not allow us to maintain differnt Number ranges for same logical backend ECC system.
Regards,
B.N.Karthikeyan
Edited by: B.N. Karthikeyan on May 17, 2011 9:25 AM

Similar Messages

  • RADIUS-assigned VLANs are not supported when you enable multiple BSSIDs

    Could someone please tell me is this 100% correct?
    "RADIUS-assigned VLANs are not supported when you enable multiple BSSIDs"
    Any ideas why? Does anyone have a way around this?
    As a workaround I was thinking of setting up one broadcast SSID for guests and one non-broadcast SSID for RADIUS assigned VLANs, however i'd prefer to have both broadcast due to numerous Vista and PDA connection issues.

    Hi.
    Thanks for your reply.
    That is what I would like to do; have one SSID and assign the users to different VLANs based on policy.
    I have all the VLANs and subinterfaces set up correctly and working independently, but the VLAN assigment does not seem to work correctly.
    If I do a "show dot11 association all-client" the RADIUS attribute appears to have altered the VLAN, but the device has no connectivity and cannot DHCP.
    This is with 1130AG in autonomous mode and Microsoft IAS as RADIUS.
    Apparently there may be a problem with mbssid and RADIUS assigned VLANs.

  • What can be done to enable multiple usb  "mouse" buttons  in Solaris 10 ?

    My usb multimedia keyboard is recognized as a "combined" usb device.
    Two /dev/usb/hidx are created , one with usb keyboard driver attached, the other with the usb mouse driver attached.
    Events are generated for the scroll wheel on the keyboard, but not for the cca. 30 extra buttons.
    Is there a way to enable multiple buttons support for the "mouse" device ?
    The OS is Solaris 10 x86 u3

    I don't know how ZAxis... can make those buttons work.
    Pressing those keys don't generate any event in xev.
    xmodmap -pp shows a maximum of 24 buttons which I cannot map to anything.
    On linux there are some drivers and applications one can use to map the keys.
    On Solaris, I don't know.

  • SRM Classic Scenario & Invoicing Service Purchase Orders through SUS

    Hi everyone,
    I hope I am able to provide enough information to ask this question.  We are running SRM Classic Scenario in addition to SUS.  We would like to be able to have our Vendors login to SUS and Invoice us.  However, we are being told that in order to do this we will need to install EHP4.  We are currently running ECC 6.  Could someone help me understand what it is exactly that we are not able to do this as is?   I understand that we are able to configure our current system setup to process Material related Invoices but not Services related invoices.
    Thanks for your help.

    Hi Jellis,
    Your vendors can send invoice from SUS but only for material POs (As you are not running ECC 6 with Ehp 4)
    If you want the vendors to send you invoice for service POs also, then you need to go with Ehp 4 as service POs are not supported in SUS using IDOC technology. They need to be in XML format only.
    Regards,
    Nikhil

  • Procurement(P) card Implementation SRM Classic & SAP R3

    Hi,
    I am looking for Pcard Implementation for SRM 4.0 Classic scenario .
    Anyone have experience about the PCard Impementation for SRM or SAP R/3 ?
    We have following queries related to PCard Implementation :-
    1. How to get file from bank having transaction details ?(Communication between Bank & SRM)
    2. How it would be handled for collective invoice against single procurement ?
    3. Posting invoice to SRM/SAP R/3 using Idoc/BAPI ?
    4. And also how the flexibity to change the account assignment will be provided in SRM/SAP R/3 ?
    I observed using Third Party tool its possible but we are looking without Third party tool .
    Thanks,
    Sachin

    Hi,
    P card is not supported in Classic scenario as a standard.
    Thanks,
    Manu

  • Info record mandatory for shopping cart creation in SRM classic scneario

    Hi Gurus,
    We are creating shopping cart in our SRM 7.01 system in classic mode. We have not created any info record for the product category and vendor in the backend ECC system.
    Do we need create an info record for the particular combination of material group/material and supplier in the ECC backend system so that the shopping cart in SRM classic scenario creates a PO directly in the system?
    Thanks and regards,
    Ranjan

    Hi Sam,
    Thanks for your update. So, what you mean that the SRM shopping cart  with a direct vendor or contract can create a PO directly in the backend  system even if the backend system does not have nay info record for the particular combination of the material and vendor.
    Thanks and regards,
    Ranjan
    Ranjan Sutradhar

  • Enabling Multiple Search in Advanced search

    Hi All,
    I am trying to enable Multiple search on a particular field in the advanced search for that PCUI application. E.g Search for Opportunities with Partner P1 and P2.
    When i perform the search the results show me all opportunities with partner P1 OR Partner P2. So i get all opportunities which belong to partner either  P1 or P2 or both
    I want to view all opportunities with partner P1 AND P2 i.e i want to search only for those opportunities that have both P1 and P2 in it
    Is there anyway we can achieve this
    Thanks and Regards,
    Varun

    Hello,
    The MAC for the the advanced search in opportunities (application CRMD_BUS2000111) is CL_CRM_BSP_AM_HEADME_1O.
    Create a Z MAC inheriting from this MAC and redefine the method IF_CRM_BSP_MODEL_ACCESS_IL~QUERY.
    In you redefined method, you can for example first call the ‘super’ query method and do your own additional selections after.
    The FM used for the standard query is CRM_BSP_OIC_1O_SEARCH_FROM_RF.
    You can maybe also check how this FM is called and make you own call of this FM.
    Regards,
    Frederic

  • How can we enable multiple people to work on the same Xcelsius file

    I want to enable multiple people work on the same file as I am working on. How Can I achieve this task?

    Hi Jain,
    I dont think there is a logic behind your requirement.  If multiple persons are allowed to work on one file, then whose modification has to get saved as a final copy.  Even in MS office documents also, you will be notified/prompted if you are opening at the same time some one else is already working on the same.  Please clarify your requirement more.
    If i presume that if you are talking about the Xcelsius output file such as word, pdf, etc.,. then it is clear that all can open the same file in read only mode except the one who is opening the same First.  Anyhow they cannot modify the SWF contents.  Only header or footer can be inserted.
    Hope this is clear.  Please revert on your exact requirement.
    With best wishes
    BaaRaa.

  • SRM classic scenario with shopping cart

    In a SRM classic scenario it's possible to create a shoping cart for material stock or it's only possible to create for indirect material (center cost, order, etc).

    Hi Carla
    yes. Indeed you need enhancement
    http://wiki.sdn.sap.com/wiki/display/SRM/BBP_CREATE_BE_PO_NEW-CreatePOin+backend
    you need to clear the account assignment while creating a PO in the backend.
    so PO will be created in the backend rather than in SRM .
    but see impacts - how inventory gl accounts are posted while doing good receipt. Is it taking GL account from valuation class .
    Hide the Order as direct too in SRM .
    create one custome field in shopping cart to determine to order a PO in the backend (for stock materials) so when you check this field, this sc item PO will be created without account assignment.
    Muthu

  • PO Confirmation in SRM Classic Scenario

    Hi,
    I'd like to know if there's a functionality in SRM Classic Scenario wherein suppliers/vendors can tag POs that have been received by them?

    Hello,
    This is the correct behaviour of SUS - confirmations can only be created for service items which in turn create service entry sheets (Trx: ML81N in ECC).  And accepting the SES in ML81N will generate GR posting.
    For material items, you have to create ASN which will in turn create inbound delivery in ECC which you can post and will generate goods movement documents.
    So basically, for service items you create confirmation and for materials you create ASN.
    Regards,
    Prasanna

  • Need to reinstall illustrator CS5 upgrade but original version I have is Illustrator 10 which is only supported by Classic

    I had my hard drive replaced on my imac. I now need to reinstall illustrator and Photoshop CS5 upgrades. The original full version of these was Ill10 and Photoshop 6 which were only supported by Classic OS9 which is no longer on my computer. How do I go about installing these without that?

    What OS X version is on the iMac? Classic can only be used with Tiger OS 10.4 and lower.
    The OS 9 installer is on the install disc that came with your iMac.
     Cheers, Tom

  • I just upgraded my older G5 from tiger to leopard and it is now at 10.5.8, I was unaware that the new system did not support the classic envoirnment and cannot access my 6.0 version of Photoshop, which I use often...how do I get P.S. going again?

    I just upgraded my older G5 from tiger to leopard and it is now at 10.5.8, I was unaware that the new system did not support the classic envoirnment and cannot access my 6.0 version of Photoshop, which I use often...how do I get P.S. up and going again?

    Niel...
    I installed Leopard 10.5.6 and then it upgraded to 10.5.8, when I installed it I had the old info saved to a "previous systems" folder, where most of my artwork, etc. were saved, I have a one terabyte Lacie backup that unfortunately did not work as it was intended...it saved the new info and not the old. I did look into the system preferences folder and found the classic file, of course it wouldn't launch...but I have the old G 5 startup discs and will try to do it as you stated. I will try also to move it out of the previous folders file to my hard drive and see how that works.
    thank you for your time and help,
    Dennis

  • Enable multiple selection in spark datagrid

    Hi guys, I am trying to enable multiple selection in my datagrid. I tried allowMultipleSelection=true but it didn't have that attribute on spark component. Anyone knows how to do it? Thanks a lot.

    Use selectionMode="mutipleRows"
    http://help.adobe.com/en_US/flex/using/WS0ab2a460655f2dc3-427f401412c60d04dca-7ff8.html

  • Enabling Multiple Currencies vs. Custom Currencies

    Is there any advanatages and disadvantages of using Enabling Multiple Currencies versus just using a custom dimension for currencies?

    Well you would be adding yourself quite a bit of work by creating a custom dimension for currencies.
    Dont forget that when you tag an application as multi currency, 2 additional dimensions are created: Currencies and HSP_Rates.
    Additionally exchange rates types (historical, average, ending) are stored against that Accounts dimension.
    You ve also got to think about the currency conversion rules/scripts created with mutli currency apps.
    Creating a currency custom dimension would not include the above.
    Hope this helps.
    Seb
    www.taysols.com.au

  • How to enable the NTFS Read/Write support without 3rd party software?

    Is there a way to enable the NTFS Read/Write support of Mac OS X 10.6.8?

    Well, I've used Paragon NTFS, but if you don't want to use 3rd party software, you should do this AT YOUR OWN RISK:
    Open Terminal.app (/Applications/Utilities/Terminal)
    Type "diskutil info /Volumes/volume_name" and copy the Volume UUID (bunch of numbers).
    Backup /etc/fstab if you have it, shouldn't be there in a default install.
    Type "sudo nano /etc/fstab".
    Type in "UUID=paste_the_uuid_here none ntfs rw" or "LABEL=volume_name none ntfs rw" (if you don't have UUID for the disk).
    Repeat for other NTFS partitions.
    Save the file (ctrl-x then y) and restart your system.
    After reboot, NTFS partitions should natively have read and write support. This works in both 32 and 64-bit kernels. Support is quite good and fast, it even recognizes file attributes such as hidden files.
    Good luck!

Maybe you are looking for