Enable Park functionality in FBS1

Hi all,
We wanted to Park accrual document. We are posting accruals through T.Code FBS1, but system is not allowing to PARK the document. It is grayed out in manu path.
My question is could I copy a new program from FBS1, then set the status to enable the Park functionality?
Thanks, anything useful will be rewardful.
Tony

Hi,
There is no possibility in standard SAP to park an accrual document. May be, you can log a message to SAP OSS and find out the other possibilities.
Best Regards,
Madhu

Similar Messages

Enabling Nested Functions in Terminal?

I downloaded, and compiled FUSE, but when I try to "make" it i get this error
Macintosh-5:fuse-2.7.4 alexcaballero$ make
Making all in include
make all-am
Making all in lib
if /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVECONFIGH -I. -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/usr/local/bin\" -DFILE_OFFSETBITS=64 -D_REENTRANT -DFUSEUSEVERSION=26 -Wall -W -Wno-sign-compare -Wstrict-prototypes -Wmissing-declarations -Wwrite-strings -g -O2 -fno-strict-aliasing -MT fuse.lo -MD -MP -MF ".deps/fuse.Tpo" -c -o fuse.lo fuse.c; \
then mv -f ".deps/fuse.Tpo" ".deps/fuse.Plo"; else rm -f ".deps/fuse.Tpo"; exit 1; fi
libtool: compile: gcc -DHAVECONFIGH -I. -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/usr/local/bin\" -DFILE_OFFSETBITS=64 -D_REENTRANT -DFUSEUSEVERSION=26 -Wall -W -Wno-sign-compare -Wstrict-prototypes -Wmissing-declarations -Wwrite-strings -g -O2 -fno-strict-aliasing -MT fuse.lo -MD -MP -MF .deps/fuse.Tpo -c fuse.c -fno-common -DPIC -o .libs/fuse.o
In file included from fuse.c:18:
../include/fuse_compat.h:69:24: error: sys/statfs.h: No such file or directory
In file included from fuse.c:18:
../include/fuse_compat.h:91: warning: 'struct statfs' declared inside parameter list
../include/fuse_compat.h:91: warning: its scope is only this definition or declaration, which is probably not what you want
../include/fuse_compat.h:140: warning: 'struct statfs' declared inside parameter list
fuse.c:689: warning: 'struct statfs' declared inside parameter list
fuse.c: In function 'convertstatfsold':
fuse.c:691: error: dereferencing pointer to incomplete type
fuse.c:692: error: dereferencing pointer to incomplete type
fuse.c:693: error: dereferencing pointer to incomplete type
fuse.c:694: error: dereferencing pointer to incomplete type
fuse.c:695: error: dereferencing pointer to incomplete type
fuse.c:696: error: dereferencing pointer to incomplete type
fuse.c:697: error: dereferencing pointer to incomplete type
fuse.c: In function 'fusecompatstatfs':
fuse.c:708: error: storage size of 'oldbuf' isn't known
fuse.c:708: warning: unused variable 'oldbuf'
fuse.c: In function 'curr_time':
fuse.c:1183: error: nested functions are disabled, use -fnested-functions to re-enable
fuse.c:1183: error: syntax error before 'clockid'
fuse.c:1184: warning: implicit declaration of function 'clock_gettime'
fuse.c:1184: error: 'clockid' undeclared (first use in this function)
fuse.c:1184: error: (Each undeclared identifier is reported only once
fuse.c:1184: error: for each function it appears in.)
fuse.c:1186: error: 'CLOCK_REALTIME' undeclared (first use in this function)
make[1]: * [fuse.lo] Error 1
make: * [all-recursive] Error 1
when I try -fnested-functions in the terminal to enable the functions, this error comes up
Macintosh-5:~ alexcaballero$ -fnested-functions
-bash: -fnested-functions: command not found
so how do i enable them?

Well the thing is that I did install MacFuse, yet the directions I got told me I had to download FUSE as well. I'm trying to mount my Gmail account on my desktop.
So were these instructions Mac specific? Or where they for Unix/Linux systems running Fuse? Is there a web URL you can give?
Oh yea, where did you download your Fuse sources from? Just in case someone whats to look at a copy.
As to your -fnested-functions error:
fuse.c:1183: error: nested functions are disabled, use -fnested-functions to re-enable
This is NOT a shell option, but a compiler option. If you wish to pursue this, you would need to change the Makefile so that the compiler using the -fnested-functions option.

How to debug "pipelined parallel enable table function" ?

Dear All,
Normally we can retrieve output from a "pipelined parallel enable table function " by using SQL statement, such as
select output from table(pipelined_function(arg1));
Can anyone alight me how to call this function purely using PL/SQL statement?
Reason for this : We have third party developer develooped a complicate "pipelined parallel enable table function" and this function is currently calling by SQL (select output from table(pipelined_function(arg1));
), I will like to debug this function, but unable to do so, so far I have done :
1) compile function with debug option
2) using Procedure Builder to debug, if I execute the above statement (select output from table(pipelined_function(arg1)); I believe, Procedure Builder will not debug a function from a SQL statement
3) try to build up a PL/SQL block, but don't know how to it.
basically I want to debug this "pipelined parallel enable table function " and don't know how to do it, any example will be greate!

user2302827 wrote:
Using dbms_output is fine but too tedious. I was looking for a PL/SQL procedure builder that can help to debug a statement like this:
select output from table(pipelined_function(arg1));
Any suggestion?I don't know about any procedure builders.
There is a debugger you can use, though I'd have to think about how to invoke it to use with a pipelined function. The debugger is available in GUI tools like SQL*Developer and TOAD and can be used to walk through a program and set values

In Office 2011 the function "share it by e-mail" seems to be disabled. that happened recently, just after the apple update regarding Java. Any idea on how enable this function again?

in Office 2011 the function "share it by e-mail" seems to be disabled. that happened recently, just after the apple update regarding Java. Any idea on how enable this function again?

I was able to get to a support person who helped me fix this without charge. I guess it was my bad for not trying the right way to access support.
Anyway, they answer is this.
I had to create a new account on my computer. When I logged into the new account it immediately wanted an AppleID. I used my daughter's e-mail address for the AppleID. This setup the internet accounts correctly with her iCloud.com e-mail address. I was then able to access e-mail in both the browser and Mail. Not that complicated but nothing that I would have easily thought up on my own.
Thank Apple Support!

Enable Attachment function on my Custom form

Dear All,
I am unable to enable attachment function on my Custom Sales Order form. Our form is just like standard form with some minor changes.
Please, help me in this regards.
Regards,
Arsalan

See if this helps
Enabling the attachment icon for custom form created on custom view
External site too
http://oracleappstechnicalworld.blogspot.in/2008/04/attachment-functionality-in-oracle.html
Mahendra

No "enable Java" function on Macbook Air. Help!

I am having problem updating to the latest Flash player version. It kept showing "close safari"
after some research, i found out that my MacBook Air has no "enable Java" function.
any advice?
Regards

Java has nothing to do with Flash, and enabling it would not help you install Flash. Log out or restart the computer withou launching Safari and try again.

RFC Enabling a Function Module

Hi Friends
I need to remote enable a Function Module( for RFCs ) which was already developed some years ago.
I need to know what all things I need to take care of when remote enabling such a Function Module.
Thanks
~S

this is what u need to do...
1) change attributes of FM to Remote-Enabled
2) create RFC destination in SM59, u can specify the logon information here to access the remote system
3) call the function by specifying the DESTINATION addition in the CALL FUNCTION statement...
that is...
CALL FUNCTION <func_name>
DESTINATION <RFC destination name>
but make sure of the following...
1) if u r going to use asynchronous RFC, there should not be a return parameter in the FM,
2) table header lines cannot be passed in RFC FMs
3) no parameters can be passed by reference
read the documentation on RFC for details...
http://help.sap.com/saphelp_erp2004/helpdata/en/22/042abd488911d189490000e829fbbd/frameset.htm
rgds,
PJ

How to enable Comment functionality in Design Studio

Hi Experts,
How can we enable comment functionality in Design studio? This is important for users:
a) To enter comments in the application
b) To see the comments after reopening the application again. This means, it needs to be stored somewhere.
This application is built on top of a BEx Query.
Really appreciate your help here!!
Thanks,
Jomy

Hi Jomy - I see your point
Looking at Figure 7 here Lumira and Design Studio Updates Roadmap from ASUG Annual Conference - Part 2 it is not going to be built in Design Studio
So my opinion only here - either you buy CubeServ add-on or you build SDK yourself. As an accountant I would do cost-benefit - how long (cost) would it take for someone other than CubeServ to do it versus buying from CubeServ.
Maybe others have ideas?

When exit they normally ask whether we want SAVE & QUIT, how to enable that function to appear?

As stated above, how can we enable that function back again? As it is troublesome for me when i exit and next day i need click those necessary tab out.

You can set the warn prefs on the about:config page to true via the right-click context menu or toggle the value with a double left-click.
* browser.tabs.warnOnClose, see http://kb.mozillazine.org/About%3Aconfig_entries
* browser.warnOnQuit , see http://kb.mozillazine.org/browser.warnOnQuit
* browser.warnOnRestart , see http://kb.mozillazine.org/browser.warnOnRestart
Another possibility is to use:
*Tools > Options > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
Firefox 4 saves the previous session automatically, so in that version there is no longer need for the dialog asking if you want to save the current session. 
You can use "Firefox > History > Restore Previous Session" to get the previous session. 
There is also a "Restore Previous Session" button on the default about:home Home page.

Urgent: Enabling Folder functionality in Custom Form

Hi!
I want to enable the folder functionality in my custom form. I'm copying STANDARD_FOLDER object group from standard oracle form and attaching APPFLDR library.
But when I try to open any folder in my form all the fields get disabled.
Any help on this will be appreciated.
Thanks

Post your question in OA forum:
http://forums.oracle.com/forums/forum.jspa?forumID=40, this is the forms forum, you'll get more help there.
Message was edited by:
Rosario Vigilante

What is required for FM 9.0 to support WebDAV-enabled server functionality?

I've read the FM 9.0 Help about WebDAV (Web-based Distributed Authoring and Versioning) but when I asked some of our IT folks about it, no one knew the answer or even what WebDAV is.
We tried using a WSS server for some of our FM 7.2 files but it was not a successful experiment, as some of our files disappeared. We've just begun using a MOSS server, although to me it seems that is probably more friendly to Microsoft Office docs than to Adobe products. After the problems on the WSS server, we reverted to our previous version-control method using VSS -- however, with FM 9.0 having check-in/check-out options, I'm hopeful we can yet use a SharePoint server and HTTP protocol to access and maintain version control of our FM files.
I posted a question about FM on SharePoint last year and response seemed to indicate others had experienced problems using SharePoint for version control of FM files (someone told me to think in terms of "SharePain", which made me smile through my tears). With FM 9.0, have things improved? Am I mixing apples and oranges by using SharePoint and WebDAV in the same sentence? How can I find out if our SharePoint servers are (or can be) "Web-DAV enabled"?
As always, your expertise is greatly appreciated.
Cheers,
Gay

Hi Arnis,
Thanks for the links -- I had seen a couple of them but was put off by the references to CMS since we don't use a "real" CMS like Documentum.
I read lots of the FAQs at www.webdav.org and also found a couple of excellent sources:
For IIS 6 on Windows Server 2003: Mitch Tulloch's tutorial at http://www.windowsnetworking.com/articles_tutorials/WebDAV-IIS.html
For IIS 7 on Windows Server 2008: http://learn.iis.net/page.aspx/350/installing-and-configuring-webdav-on-iis-7
We won't be upgrading to the latter till later this year so will first go with IIS 6 on Server 2003 and see how we fare. Apparently we *should* be able to check out, open, edit and save a file on the server, but although SharePoint also offered that functionality, it apparently was limited to Microsoft products. So I won't celebrate prematurely -- but as always, my fingers are crossed!
~~Gay

Re-compiled VLC to enable PVR function

Hi, brand new arch user here. I just installed this weekend and have been trying to set things up to my liking. I had to recompile VLC with the '--enable-pvr' option so I can watch TV using my Hauppauge 150pvr card. All I did was copy the PKGBUILD and install files for vlc from the existing abs tree into a new directory in my home folder. I just added the --enable-pvr option, and changed the pkgver to '2' from '1'. Followed the rest of the instructions from the wiki. Things seemed to work, vlc now has the pvr function and I can watch TV again.
The problem now is that when I try to run 'pacman -Syu', it wants to change vlc back to the original version 1. I keep saying no, but how do I stop this and make my version the permanent one? Also, can I delete all of the unpacked files from the vlc tarball in my /home/myname/abs/vlc folder that I created?

Welcome to the forums.
For the first question, add this line to your /etc/pacman.conf file. I put it under the HoldPkg line for cleanness:
IgnorePkg = vlc
For the second, you can delete all of the files from building the package.
Last edited by skottish (2008-07-21 22:13:03)

Enabling nested function?

I'm trying to "make" FUSE, and i keep getting this error
fuse.c: In function 'curr_time':
fuse.c:1183: error: nested functions are disabled, use -fnested-functions to re-enable
fuse.c:1183: error: syntax error before 'clockid'
fuse.c:1184: warning: implicit declaration of function 'clock_gettime'
fuse.c:1184: error: 'clockid' undeclared (first use in this function)
fuse.c:1184: error: (Each undeclared identifier is reported only once
fuse.c:1184: error: for each function it appears in.)
fuse.c:1186: error: 'CLOCK_REALTIME' undeclared (first use in this function)
make[1]: * [fuse.lo] Error 1
make: * [all-recursive] Error 1
i tried -fnested-function but i get
Macintosh-5:~ alexcaballero$ -fnested-functions
-bash: -fnested-functions: command not found

Cross posted in the Mac OS X Technologies -> Unix forum
<http://discussions.apple.com/thread.jspa?messageID=9073766&tstart=0#9073766>

Remote enabling a function module

Hi all,
I need to use function module WFMC_MESSAGE_SINGLE to allow printing with PDA. However it is not remote enabled.
How can I make it remote-enabled? What are the possibilities?
Thanks

copy the function module WFMC_MESSAGE_SINGLE to a ZWFMC_MESSAGE_SINGLE function module and keep the same function group and click copy icon.
Now in the attributes of the new function module select the Processing Type "Remote_Enabled Module"
Save and activate.
Reward Points if useful.

VC01N (SAPLV43D) - Unable to Enable Email Functionality

Hello Experts,
I am in desperate need of help. Within our developement environment (BDV), I have modified program SAPLV43D in order to give the user email capability. I have added the pushbutton to the GUI status, confirmed that the email functionality (ZXV43U12) is turned on and the code in place (FCODE_6X1) for generating the email. Everything works great on BDV. Now I would like to test on our test environment (BTS). I have transported the code to BTS but the email button does not display. I have ran a remote comparison but everything seems to be there. After many attempts, I have exhausted my limited knowledge of SAP and could really use some help on what I may want to do next. Could there be a configuration difference that I may need to check? If so, where in SPRO should I look for these settings?
Thanks for your help in advance.
Laura

I found my problem. The Synch button (Wi-Fi, Location, Sound, Screen Rotation, etc.) was not enabled.
As the great philosopher, Emily Litella (Gilda Radner), on Saturday Night Live once said, "Nevermind".

Enable Park functionality in FBS1

Similar Messages

Maybe you are looking for